Same SMTP Relay problem but new reasons. Works with most but not with few

I am writing a mail server. My applications sends mail directly to the SMTP server of recipient using MX Record. I find out the MX Record of the recipients and then using Java Mail send mail to that MX Record.This application is working fine and it has worked for thousand or so SMTP Server successfully.
There are couple of servers (SMTP of recipients) those reject the mail saying SMTP Relaying Prohibited by the Administrator and further says Invalid Mail Address Destination. I am wondering that the recipients belong to that same domain (MX record). I am able to mail them from yahoo or hotmail. I am not trying to use that SMTP for relaying, infact that mail account is registered in that particular SMTP Server.If that server is using SMTP Authentication, how come yahoo or hotmail authenticate for sending mail to their user.
I am sending all genunine parameters like senders mail address etc. I have tried setting various. Can anyone help me where I am missing?

My applications sends mail directly to the SMTPserver of recipient
using MX RecordYou don't send mail to the SMTP server you send it to
the pop3 server, anyway...
Nopes, you do send mail to the POP3 server. POP (Post Office Protocol) is used for fetching mails. Se RFC 1939 http://www.faqs.org/rfcs/rfc1939.html for more detailed information. Usually the mail agent contacts the local SMTP server and it queues it for delivery to other SMTP server that it can find via the MX record, trying the one with the highest priority first which incendently is the one with the lowest number.
If that server is using SMTP Authentication, howcome yahoo or
hotmail authenticate for sending mail to theiruser.
Hotmails' SMTP server will let you send to anybody,
most other private SMTP servers generally will
restrict the domains you can send to.
I'm a little confused as to what your problem is you
are connection to SMTP servers to send individuals
emails? why not just use on SMTP server to send to all
He is making a SMTP server.
Back to the original question:
Since you are checking the MX record for the address it should not be considered to be a relay of mail. The only reason this should happen is if the RCPT is set to something wierd like
<@HOSTA.ARPA,@HOSTB.ARPA:[email protected]>See RFC 0821 for more information. I am not sure if RFC 0821 is obsoleted, but this should still apply.
Regards,
Peter Norell

Similar Messages

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

Why is my airportxpr only working with Itunes and not with another music program

why is my airportxpr only working with Itunes and not with another music program??
I can not select/see other outputs in my sound selector.

You have not indicated which OS or which music program you have so I have listed a program called Airfoil to try for both Windows and Mac - it may work for you
for Windows - http://rogueamoeba.com/airfoil/windows/
for Mac - http://rogueamoeba.com/airfoil/mac/

Installation problems installing new Canon MG3170 onto MAC Book Pro with OS X 10.7.5. Tried installing using set up disk. Didn't work. Uninstalled files and downloaded drivers from Canon Website. Didn't work. Uninstalled again and plugged printer usb

Having problems installing Canon MG3170. Anyone have any solutions? Here is what I have tried:-
-Installed from provided Canon disk, firstly with wireless connection, then using USB connection. Printer could not be added because the Macbook returns that the software is not available from Apple for both types of connections.
-Uninstalled software from the Canon disk, checked for software updates, then downloaded drivers (printer and scanner) from Canon Website. Again tried to install using wireless connection then USB connecton. Printer could not be added because Macbook returns that the software is not available from Apple
-Uninstalled drivers downloaded direct from Canon Website and plugged printer into Macbook using USB, Macbook recognised the printer and searched for the software, again Macbook returns that hte software is not available from Apple.
Help!

nrg adjusta,
Sorry it took me a while to repsond, Ive been pretty busy with school and work. But for my hard drive problem, I did hours and hours of more research and trying countless ways of installing and tweaking things in my laptop and absolutely nothing worked that I could do. It was very irritating because I felt like I was so close to fixing it and I was just missing a step somewhere. Though It still boggles me why the disk utility shows a different capacity for the HD's. One thing I'm going to try next is replacing the hard drive cable that goes from the internal HD to the macbook. I read somewhere that sometimes those can go bad over time, and also if you get a new, modern hard drive, sometimes the old cable (for some odd reason) might not be compatible with the new HD. So i want to test it out for myself to see it that is the actual culprit.
http://www.ifixit.com/MacBook-Parts/MacBook-Hard-Drive-Cable/IF186-018
Once I get the cable and install it I'll let you know the results and if it helped at all.
Have you made any progress on your hard drive at all? If worst comes worst for you, you can probably get a SATA to USB cable and try to reformat it that way (this is the way that worked for me, but the only problem was it wouldn't be recognized when I installed it internally. Thats why i want to try getting the new cable), and if it still wont recognize it after that, you can just leave it outside of your mac, and just boot from that. The only thing that ***** about that is you have this big hard drive handing off the side of your mac when ever you need to use it.
Heres a link for a SATA to USB. this one is good because is compact and protects the HD from damage and most static electricity.
http://www.thinkgeek.com/computing/usb-gadgets/e6d9/?srp=3
Im still continuing my search for the answer and once i find it (if ever!) I'll post it.

New ipod works in speaker but is not snug - suggestions?

I bought a new nano today because my mini broke a few days ago. (middle click button hasn't been working for a few months and the back button stopped working yesterday i got fed up and decided i needed a new toy lol) I have speakers for my mini. It came with attachments for the regular ipod and the mini. They are about a year old and I'm pretty sure it didn't come with nano attachments. The nano still works with the speakers, but whenever i press on a button on the nano it moves. It doesn't come out of place but I wonder is this bad for my nano? Since I didn't want to buy expensive apple speakers the attachment for that nano that came with my second generation doesn't fit.
So does anyone know if putting my nano in the speakers is bad for it? Would you suggest i use my mini adapter for the speakers or just let it go without an adapter. Either way it doesn't fit but I wonder if one is better. Any help would be appreciated!

As you have already discovered the iPod connectors align properly. The problem is that the Nano is not properly supported, and constant flexing (when you push the ClickWheel, causes strain on the iPod connector. The connector could break...and it will not be covered by the warranty.

Isight works...just not with AIM

My isight (MBP) works, just not with AIM. This problem just recently started happening. I do not even see the Camera icon on my buddy list.
When I restart in safe mode, I know longer have the problem. But when I start my comp up with a regular boot the problem reappears.
Any help would be greatly appreciated

iChat works better in both iChat 3 (Tiger) and iChat 4 (Leopard) if the System Preferences > Quicktime > Streaming Settings are set to 1.5Mbps and Not Automatic.
In Tiger iChat 3 reads the Automatic Setting as a Zero.
In Leopard this setting is now read as only 384k which will allow you to Video chat and is also the lowest Spec setting Apple states a 3 and 4 way chat can happen but will cap what Bandwidth/Connection speed you have.
If we are talking form iChat TO AIM (6.5 or above) then you should read this doc by AIM on their Real Time Protocol (read th paragraph under the pics.)
2:54 PM Sunday; February 1, 2009

Sound Headphones work in commandline test, not with programs

So I have a strange question. I've seen a bunch of posts about headphones and speakers playing together, but i have a different issue. My speakers work, and I can't get headphones to work. so I did as the wiki said and installed asoundconf and everything. But youtube will still play out of speakers. I use the aplay ~ thing from the wiki and it plays out of my headphones. So the headphones work, but why is it that they don't play sound normally? Alsamixer can mute the speakers, but it doesn't switch to headphones. If my problem were both would work, all the posts about simultaneous headphone/speakers would help. Sadly, my issue is different (though i imagine, easier to solve).

lol. i was saying that in the wiki, it says to use aplay /usr/share/sounds/alsa/Front_Center.wav and it will play that sound. That sound plays through my headphones, which means that they work. My question would be if they work, why doesn't anything else use the headphones, they aren't muted or anything?

Problem starting SAP: disp+work.EXE Running but bad dialog queue time

Hello,
I have been trying to start my SAP test instance on a local computer, but it does not work. I can see "Running but bad dialog queue time: 12.00 sec". This was working a few weeks ago, but now it doesn't anymore. My initial assumption was the database was filled, but I checked that and it seems ok, there is still space for data and logs...
I have checked the dev_disp log and I can see these:
*** ERROR => DpHdlDeadWp: W0 (pid 7540) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W1 (pid 6008) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W2 (pid 2412) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W3 (pid 7284) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W4 (pid 1340) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W5 (pid 4088) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W6 (pid 304) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W8 (pid 2120) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W9 (pid 5392) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W10 (pid 6140) died (severity=0, status=0) [dpxxwp.c    1531]
*** ERROR => DpHdlDeadWp: W11 (pid 2996) died (severity=0, status=0) [dpxxwp.c    1531]
Then I checked the log for W0 and I think this is the problem:
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3286]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1276
    (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3286]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5137]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11313]
The connections are refused for some reason, I don't know why. Can anyone help? I am attaching the log files...

Hi
As per your work process trace (dev_w0), it is not able to reach icm port 65000
M Mon Aug 11 10:27:39 2014
M ***LOG Q0I=> NiPConnect2: 127.0.0.1:65000: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3286]
M *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 1260
    (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:65000) [nixxi.cpp    3286]
M *** ERROR => IcmConnect: NiConnect to localhost:65000,-1 (rc=-10) [icxxext.c    182]
M *** ERROR => ThPlgConnectToIcm: IcmConnect failed (-10) [thxxplg.c    5137]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c   11313]
to fix this error, follow below 2 SAP KBAs ;
1934023 - Application server startup fail with an ICM connection error
1900647 - Parameter icm/admin_port
regards
Swami

Main account missing dock, but new account works

Here's the situation...
I restarted my computer today (with no updates being installed or any real changes) because I noticed that it was a little slow.
However, when it finally rebooted, everything was impossibly slow (30-60 seconds for any action to register) and my dock was missing. On top of that, my wallpaper would occasionally flash to black and then back to the image. I've read through a ton of posts about this and apparently I'm not the only one.
I've tried killing the Dock process, deleting my preference files, and even completely reinstalling the OS. No change. My dock isn't hidden or anything like that...it's definitely something much worse. I'm on Yosemite and have been since it came out with no issues.
However, I decided to try to see what would happen with a new account. I created a new admin account and it works perfectly fine. The dock is there, it runs fast, no wallpaper issues. What possibly could be the problem with my original account. I'd be fine to start with this new account if there was a simple way to port everything over from the old account, but that doesn't appear to be the case.
Ideas on what might be causing this problem?
Thanks,
JMR

Yes...this still happens in safe mode. I ran Entrecheck. Here's what came out: Thanks for your help.
Problem description:
My main account no longer shows the dock and the wallpaper regularly flashes to black. Everything is very slow to respond (45-60 seconds per action). This happens in safe mode and normal. I’ve done everything I can think of including reinstalling Yosemite.
If I create a new admin account, the new account seems to function fine in both safe and normal mode, but clearly there’s a larger problem.
EtreCheck version: 2.1.6 (109)
Report generated January 23, 2015 at 4:15:01 PM EST
downloadetrecheckhttp://etresoft.com/etrecheck
hardware info
MacBook Pro (15-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: 1 interface (plural rule: one) en1: 802.11 a/b/g/n
Battery Health: Good - Cycle count 540
video info
Intel HD Graphics 3000 - VRAM: 512 MB
AMD Radeon HD 6750M - VRAM: 512 MB
Color LCD 1440 x 900
systemsoftware info
OS X 10.10.1 (14B25) - Uptime: 0 day (plural rule: other)0:21:21
disk info
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (218.31 GB free) - 19 error (plural rule: other)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
usb info
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
thunderbolt info
Apple Inc. thunderbolt_bus
gatekeeper info
Mac App Store and identified developers
kernelextensions info
/Library/Extensions/VyprVPN
[not loaded] foo.tap (1.0) [Support]
[not loaded] foo.tun (1.0) [Support]
/System/Library/Extensions
[not loaded] com.Cycling74.driver.Soundflower (1.5.2) [Support]
[not loaded] com.cisco.nke.ipsec (2.0.3 ) [Support]
[not loaded] com.splashtop.driver.SRXDisplayCard (1.5 - SDK 10.7) [Support]
[not loaded] com.splashtop.driver.SRXFrameBufferConnector (1.5 - SDK 10.7) [Support]
[not loaded] net.telestream.driver.TelestreamAudio (1.0.5 - SDK 10.6) [Support]
startupitems info
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
startupitemsdeprecated
systemlaunchdaemons info
[failed] com.apple.sessionlogoutd.plist
[failed] com.apple.ucupdate.plist
[failed] com.apple.watchdogd.plist [Details]
launchagents info
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[not loaded] com.adobe.AdobeCreativeCloud.plist [Support]
[not loaded] com.google.keystone.agent.plist [Support]
[not loaded] com.hp.help.tocgenerator.plist [Support]
[not loaded] com.oracle.java.Java-Updater.plist [Support]
[invalid?] com.splashtop.streamer.SRServiceAgent.plist [Support]
[not loaded] org.chromium.chromoting.plist [Support]
launchdaemons info
[not loaded] com.adobe.fpsaud.plist [Support]
[not loaded] com.barebones.authd.plist [Support]
[not loaded] com.bitcasa.BitcasaUpdateCheck.plist [Support]
[not loaded] com.google.keystone.daemon.plist [Support]
[not loaded] com.jamfsoftware.startupItem.plist [Support]
[not loaded] com.jamfsoftware.task.1.plist [Support]
[not loaded] com.jamfsoftware.task.monitorUsage.plist [Support]
[not loaded] com.microsoft.office.licensing.helper.plist [Support]
[not loaded] com.oracle.java.Helper-Tool.plist [Support]
[invalid?] com.splashtop.streamer.SRServiceDaemon.plist [Support]
[not loaded] vyprvpnservice.plist [Support]
loginitems info
Google Chrome Application Hidden (/Applications/Google Chrome.app)
internetplugins info
Unity Web Player: Version: UnityPlayer version 4.0.1f2 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 [Support]
OfficeLiveBrowserPlugin: Version: 12.2.6 [Support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Support]
FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 [Support]
Silverlight: Version: 5.0.61118.0 - SDK 10.6 [Support]
PDF Browser Plugin: Version: 2.4.4 - SDK 10.6 [Support]
Flash Player: Version: 14.0.0.176 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.287
iPhotoPhotocast: Version: 7.0 - SDK 10.7
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.1.0 [Support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
preferencepanes info
remoting_host_prefpane [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Growl [Support]
HP Scanjet [Support]
Java [Support]
Symantec\nQuickMenu [Support]
timemachine info
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 280.57 GB
Destinations:
Time Machine Backups 2 [Local]
Total size: 1.60 TB
Total number of backups: 75
Oldest backup: 2012-01-31 16:25:40 +0000
Last backup: 2014-12-11 02:47:23 +0000
Size of backup disk: Excellent
Backup size 1.60 TB > (Disk size 498.88 GB X 3)
cpu info
      3% WindowServer
      1% com.apple.WebKit.WebContent
      1% ps
      0% AppleSpell
      0% com.apple.WebKit.Networking
memory info
326 MB com.apple.WebKit.WebContent
179 MB Safari
137 MB Finder
107 MB WindowServer
103 MB ocspd
vm info
11.15 GB Free RAM
3.73 GB Active RAM
981 MB Inactive RAM
1.31 GB Wired RAM
1.34 GB Page-ins
0 B Page-outs
diagnostics info
Jan 23, 2015, 04:09:19 PM /Library/Logs/DiagnosticReports/loginwindow_2015-01-23-160919_[redacted].crash
Jan 23, 2015, 03:54:21 PM Self test - passed
Jan 23, 2015, 03:10:00 PM /Library/Logs/DiagnosticReports/vyprvpnservice_2015-01-23-151000_[redacted].cra sh
Jan 23, 2015, 02:32:43 PM /Library/Logs/DiagnosticReports/vyprvpnservice_2015-01-23-143243_[redacted].cra sh
Jan 23, 2015, 02:05:00 PM /Library/Logs/DiagnosticReports/vyprvpnservice_2015-01-23-140500_[redacted].cra sh
Jan 23, 2015, 01:45:33 PM /Library/Logs/DiagnosticReports/vyprvpnservice_2015-01-23-134533_[redacted].cra sh
Jan 23, 2015, 04:09:12 PM /Library/Logs/DiagnosticReports/WindowServer_2015-01-23-160912_[redacted].crash

How do I reverse the latest update to Firefox 4.0? I recently updated and have nothing but problems...nothing works! Click on links with no result, enter web address nothing happens. Please help me downgrade to previous version as this is rediculous!

Upgrade to Firefox 4.0 has caused nothing but problems. Unable to click links, access websites, etc. How can I downgrade to previous version?

Check that the Bookmarks Toolbar is visible and that the "Bookmarks Toolbar items" is still placed on the Bookmarks Toolbar.
If the menu bar is hidden then press F10 or hold down the Alt key, that should make the "Menu Bar" appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout" (Linux, Windows)
* Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
* If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
* If you do not see the "Bookmarks Toolbar items" or other items that are missing in the toolbar palette or on a toolbar then click the "Restore Default Set" button
See also:
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars

Setting up new account works in Outlook, but not in Mail

I set up a new account in Mail just like I have done in the past, but it refuses to find the test mail I sent it. I can see the test mail by checking it through my ISPs web mail program, and I can see the mail even by setting up an account on Windows in Outlook Express, but Mail can't find it.
I set up the new account EXACTLY as I had set up accounts in the past, obviously with different names and passwords, but no result.
You can see a screenshot of my Accounts summary at http://www.wordpix.ca/mailscreenshot.jpg
Thanks

Stu,
I am not sure you want to leave that screenshot up for long, but hopefully we can resolve, soon.
Are you certain that the full email address is needed as the Username entry, or might only using the true Username portion of the address, i.e. "cindy"? Mail is very rigorous about the form of the Username, and does extract it from the email address, as some mail clients may do.
Ernie

I recently upgraded from a 2010 macbook pro to a 2015 model, loading my current CS4 software on to the new machine, working in Indesign is OK with all my fonts but when exporting to a PDF, the PDF just shows those binary boxes (probably not the correct te

Need help in determining the cause of files that use InDesign fonts, when converted to PDF do not pick up the font thus showing just box characters.

CS4 is not supported on Yosemite, and unless you did a clean install (rather than a migration) on the new system there is little chance it will work.

Using a hierarchy but also showing work orders that are not in hierarchy

good morning bi people,
i have a requirement to show data from a hierarchy which includes Operation and Maintenance information. for example it has an account broken into labour/material/trucking and below this is the pm acivity type and secondary cost element (concatenated). this hierarchy is a manually created hierarchy that is uploaded to BW and is not in ECC. The users do not want to see the concatenated field at the end of the hierarchy, but instead, want to see the Work Orders that have the PM activity types.
At the present time, we have the report using the hierarchy but we need the work orders to replace the pm activity type/secondary cost element concatenated field. the work order field is a free characteristic and when we drag in the work order in analyzer, it works correctly.
1) is this possible to use the hierarchy and somehow map the work order field to the end of the hierarchy within crystal?
2) do you have a suggestion to change the hierarchy, without being a manual nightmare?
all conversations are welcome.
Erik

Good Day Ingo,
i have created a word document with screen shots of the hierarchy from BW, a screen shot of the BEx showing the free characteristic of Maintenance Order and a screen shot of the crystal report with the PM Activity type concatenated to the Cost Element. Once again, we do not wish to see the concatenated field, but rather see the Maintenance orders that have a PM Activity type the same as the concatenated field.
here is the link.
https://docs.google.com/viewer?a=v&pid=explorer&chrome=true&srcid=0B1j5hXTptfntYWI1MDUzNGEtY2MxNy00YmMzLWJjZjEtZDA4OGZiYmMyNzFh&hl=en&authkey=CKq4xcgJ
thanks Ingo,
Erik

Problems on new Imac importing photos to iphoto 11 with sds

I have a new 27"imac on which I have already had to erase and reinstall everything when I tried to import my iphoto library (using target discs and firewire), because it turned out that the old iphoto library was corrupted. I rebuilt that library on my macbook pro and iphoto works fine there. (So far.) When I try to import photos from my cards to iphoto on my new imac i get the beach ball and it hangs up with 'preparing to import". Nothing happens, and I have to eject the sd, and force quit iphoto 11. I have downloaded aperture 3 and am wondering if it is better to just import my library to that than worry about iphoto until they fix the bugs? I have already checked and repaired permissions and checked the hard drive, which appears to be ok. Or is there a fix for this problem?

As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD

I am connected to the interent but Firefox stopped working. It will not open any web site. My Interent Explorer is working.

The connection was reset
The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
The connection was reset
The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
Every website I try to open gives the standard message "the website is temporarily unavailable ....... " yet interent explorer opens all sites

I have the same problem but can go on to some websites but not others. I have tried what was suggested about clearing recent history and also the proxy server but it hasn't resolved the problem.

Same SMTP Relay problem but new reasons. Works with most but not with few

Similar Messages

Maybe you are looking for