SAP ERP - SAP ME - iDOCS - Not received

Dear Experts,
We are trying to send data ( MATMAS iDOC) from ERP to ME.
We used the below transaction in SAP.
1. using BD10 transaction in SAP ( Send material) Idoc was sent
Checks :
We checked in WE05 in SAP and found that Idocs sent is successful
Opened MII ( Queue Monitor) and Found that Idoc was received successfully with ID but Message ( "" sucessfully Queued) Status : Queued
Problem : We are not able to see the material in ME system
No errors found in NWA logs.
Kindly suggest any solution.
Regards
Shankar

Make sure you have the plant id in the idoc. Here are the few place in the idoc that you need to add the PlantID. We're using TN01 as our plant.
<MATMAS03>/ <IDOC>/ <E1MARCM>/ <WERKS>TN01</WERKS>
<MATMAS03>/ <IDOC>/ <E1MBEWM>/ <BWKEY>TN01</BWKEY>
<MATMAS03>/ <IDOC>/ <E1MVKEM>/ <DWERK>TN01</DWERK>

Similar Messages

Check Connection of Communication Arrangement for SAP ERP Financials Using IDoc Failed

Dear experts,
We are checking outbound connection from C4TE to ERP in Communication Arrangement for SAP ERP Financials Using IDoc Failed.
We get the attached error message:
Checking connection failed
Error accessing service; Service Ping ERROR: Forbidden (403)
What could be the reasons, in ERP side, through Tcode SMICM, we didn't see any log from C4TE side, and we cannot ping the ERP side successfully.
One more thing, in C4TE, we tried to set the connection to an SAP internal ERP system, and the connection was successful. But when relinked to the customer ERP system, connection failed.
Could it be firewalls reason?
Thanks!
Best regards,
Wendy

Hi Wendy,
Yes the assumption could be one reason as well for the error (403 forbidden), but there could be several other aspects also to get the 403 error, for better understanding the reason for the error, may I request you to create an incident send it to us.
Also please try once running the scenario in C4T and check if the relevant documents are being sent through Outbound Service or not.
Thanks & Regards,
Bharath

IDoc not received in MII

Hi All,
I am using SAP MII 12.1.5 Build 87.
I am facing problem with iDoc Listner we have configured iDoc Listner properly in SAP ERP, SAP NW and in SAP MII.
We are able to send iDoc from SAP but we are not able to receive same in MII.
Port and iDoc Server is giving status connected previously it was working fine in SAP MII 12.1.5 Build 83.
Following are the log details for SAP MII Logger as well as SAP NW Log.
SAP NW Log:
Error processing JRA IDOC message
SAP MII Log:
Error processing JRA IDOC message
Error processing JRA IDOC message [server=xxx, client=xxx]
[EXCEPTION]
java.lang.NullPointerException
at com.sap.xmii.ejb.JRAListenerBean.onMessage(JRAListenerBean.java:130)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MessageListenerType.invoke(Interceptors_MessageListenerType.java:110)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Lock.invoke(Interceptors_Lock.java:21)
at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at com.sap.engine.services.ejb3.runtime.impl.MDBProxyInvocationHandler.invoke(MDBProxyInvocationHandler.java:77)
at $Proxy943.onMessage(Unknown Source)
at com.sap.mw.jco.jra.idoc.JRAIDocExtension$IDocMessageHandler.onMessage(JRAIDocExtension.java:72)
at com.sap.mw.jco.jra.JRA$ReaderThread.sendDirectToMdb(JRA.java:6641)
at com.sap.mw.jco.jra.JRA$ReaderThread.sendAsynchRequest(JRA.java:6601)
at com.sap.mw.jco.jra.JRA$ReaderThread.handleRequest(JRA.java:6771)
at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:989)
at com.sap.conn.jco.rt.DefaultServerWorker$RequestDispatcher.handleRequest(DefaultServerWorker.java:967)
at com.sap.conn.jco.rt.DefaultServerWorker.dispatchRequest(DefaultServerWorker.java:142)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.dispatchRequest(MiddlewareJavaRfc.java:2927)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.executePlayback(MiddlewareJavaRfc.java:2659)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.playbackTRfc(MiddlewareJavaRfc.java:2478)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.handletRfcRequest(MiddlewareJavaRfc.java:2362)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcServer.listen(MiddlewareJavaRfc.java:2207)
at com.sap.conn.jco.rt.DefaultServerWorker.dispatch(DefaultServerWorker.java:259)
at com.sap.conn.jco.rt.DefaultServerWorker.loop(DefaultServerWorker.java:322)
at com.sap.conn.jco.rt.DefaultServerWorker.run(DefaultServerWorker.java:220)
at com.sap.mw.jco.jra.JRA$ReaderThread.run(JRA.java:7260)
at com.sap.engine.services.connector.jca15.work.TaskImpl.run(TaskImpl.java:255)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:314)
Please help me out on this issue.
Regards,
Manoj Bilthare
Edited by: Manoj Bilthare on May 19, 2010 12:57 PM

Hi Manoj,
Once you have configured your Listener have you checked pressing the update button and i dont want to ask you which version of NW SP you have installed as you said it was working for you with Build 83, but nevertheless NW SP Level should not be not less than SP3.
If this doesn't help you,please try restarting your server again.
How about the credential editor have you configured this as well?
Regards,
Sudhir Kumar
Edited by: Sudhir Kumar Shambana on May 19, 2010 10:46 AM

Integration SAP ERP & SAP Sourcing through Oracle ESB

Hello,
Currently I am working on architecture design for new implementation of SAP Sourcing 10.
Obviously we are going to face integration aspects between SAP ERP & SAP Sourcing (Material, Vendor Master etc..).
As the the main integration platform in client's architecture is Oracle ESB, I wonder if we can use it instead of SAP PI. Client is not even considering new installation of SAP PI for integrating ERP & Sourcing, although the SAP documentation clearly states SAP PI is a mandatory component.
Do you think we can do it with Oracle ESB? Obviously assuming a greater effort than it would take with SAP PI.
As ERP <-> Sourcing scenarios base on RFC, IDOC, File, HTTP - I would say yes at first thought (as Oracle ESB is capable of communication in these protocols). But is anyone with such experience? Are there any other limitations that should be considered?
Regards,
Tomasz Gałdyś

Hi Tomasz,
All of the Integration Content is built for PI. Hopefully someone that has done this with Oracle ESB will respond but I think there will be significantly more work as the integration that is delivered is all done with PI in mind. Some customers have decided to go ahead with PI so that they could take advantage of the standard integration.
Rosemary

Idoc Not received?

Hi
During data loading , I got one Error that Idoc Not received.
What will be the cause of problem and How to resolve it?
Regards & Thanks
Durai

Hi Robert Negro !
I checked , Dump has been there.
How can I resolve?
what will be other causes apart from the Dump?
Thanks A Lot .
Regards
Durai

SAP Idocs Not Received

Guys,
I have setup up configured SAP Adapter to recieve Idocs from MySap System. The connections looks good. But when the idocs are send out. Sap Adapter doesn't pick them up and give errors like:
Wed, 20 May 2009 16:44:53.0444 IST - Thread[JCO.ServerThread-16,6,main] [info ] Check: 253D160B643C4A1425690079
Wed, 20 May 2009 16:44:53.0448 IST - Thread[JCO.ServerThread-16,6,main] [error] No subscribers for this channel. Event thrown away.
Anybody encountered such problems?
Thanks,
KS

Hi All,
Hiearchy of Installation:
Oracle Weblogic server 10.3.1
OSB 10.3.1
i have configured OSB SAP JCA adapter in adapter explorer, but after making a successfull connection to SAP application it's unable to fetch idocs. Under idoc icon created there is no idocs present. If we search particular idoc, its says not found. Even business objects repository and remote funtion modules are not coming correctly.
Has anyone faced this kind of any problem. Please let me know the solution.
Thanks

Idoc status 03 in SAP but in XI idoc not showing

Hi Experts,
in my SAP to file scenario, idoc is created successfully with status 03, but idoc is not coming to PI.
It is not happening always. some times, idocs are missing. But not able to find any error in PI.
Please guide me how to get the missed idoc.
Thanks,
Swapnashree

this is old interface and it only gave issue this time. In ECC side, when I checked, out of 4 idocs one idoc is with 03 status and other three were with 39 status.
But all in green status. No error.
RFC destination and all are correct.
Actually I am not able to see the complete error text in TRFC . that message class is not maintained. Our functional team informed that they added XX text and re import idoc and it worked. Please suggest.

Outbound IDOC not received at the receiver system.

Hi,
Im sending an IDOC from sap to a non-sap system. During this process, from sap system it is executing successfully without any erros and the status is also '03' .
The problem is that the other system is unable to receive the IDOC sent from SAP system.
The connection is like TCP/IP and the registered server program is given as 'PROGRID' in RFC destination.
I would like to know what would be the possible cases where this IDOC is not received at the receiver system.
The configuration is perfect as per my knowledge. Just want to confirm one thing 'do i need to include any message type such as "SYNCH".
Awaiting for your solutions.
Thanks
rohith

Hi,
If the IDOC is sent successfully from the sender system then the status of the IDOC will be '03' , no matter whether the receiver has received the IDOC or not.
As per your case,
Check the Partner Profile parameters , whether the basic and extended message types are used properly.
The message type Synchron (Sync) is generally needed in Inbound IDOC side. Check whether you have added SYNCH or not.
Hope this Helps.
Regards,
Abhinab Mishra.
Experience is the name everyone gives to their mistakes.

IDoc not received by the Webmethods

Dear Abapers,
I have a scenario :
Here the idoc is being created perfectly with all the segments prooperly populated. Also from SAP side, we are getting the message that it has been sent.
However, the receiver ( Webemthods) is saying that it is not receiving the idocs . So, what can be the possible reason ??
Appreciate your reply...
Thanks and Best Regards,
Kunal.

error send questionnaire in srm Ros
Registration - Error after Send / No Questionnaire
ROS Questionnaire link sent by email
ROS Questionaire
Re: Status for the transferred Suppliers is not updated in ROS client!

Communication Arrangement: SAP ERP Financials using IDoc

I am getting the following error when I try to test the Technicl Data => Outbound connection
Error accessing service; Service Ping ERROR: Error when calling SOAP Runtime functions: SRT:
Processing error in Internet Communication Framework: ("ICF Error when
receiving the response: ICM_HTTP_PROXY_UNAUTHORIZED") ()
The connection is from the SAP Cloud to Web Dispatcher URL that points to web service (trx SICF)on the
QAS instance.
When I check the following there are no entires in SICF => Client or SOAMANAGER...
1.) ICM_HTTP_PROXY_UNAUTHORIZED: Please check the proxy settings in your system
(transaction SICF->F8->Client->Proxy Settings) or check the proxy
settings in your logical port in SOAMANAGER(transaction SOAManager ->Service
Administration->Web Service Configuration; choose option Consumer Proxy
specify Consumer Proxy Name; choose the relevant configuration(Logical
Port)->display->Transport settings).
What entries should be where, any help is appreciated.

Hello Eddie,
Please create an incident to resolve the issue.
Regards,
Rahul Mishra

Idoc not received in xi

Hi,
i using idoc to file scenario . idoc are getting posted from sap sucefully i.e status 03 & no entries are found in sm58 .
I am unable to trace the idoc in xi i.e idx5 , sxmb_moni .
I have create port in idx1 for r3 also.
I am unable trace message in RWB .
Plz help me to solve this thread
Thanks,
Sridhar

Hi,
This are the ALE settings,
These will be the Configurations needed in your R3,
1. SM 59 - Create an RFC destination for your XI .
2. We21 -- Create a port for XI
3. We 20 -- Create a partner profile entry for the Outbound IDOCs for XI.
Configuration on XI
1. IDX2 - Import IDOC metadata.
For eg : Lets assume the R/3 system and Xi system are QZA and X7A.
In XI :
Step 1 : In SALE Tcode :
a)Create Logical systems for R/3 and XI.
EG : (QZACLNT100) and (X7ACLNT100).
b) Assign the logical system of XI to Client.(X7ACLNT100)
Both the above options u can find in SALE transaction under SENDING and RECEIVING SYSTEMS tab
Step 2 : In SM59 create RFC destination in XI pointing to R/3(i.e IP address of R/3) (This RFC Destination name shd be same as the Sender LS name)=> QZACLNT100 is my RFC destination.
Step 3: Create the PORT in XI for the Sender system and assign the RFC destination.
In R/3 :
Step 1:
In SALE Tcode :
a) Create Logical systems for R/3 and XI for
b) Assign the logical system of R/3 to Client.(QZACLNT100)
Step 2 : In SM59 create RFC destination in R/3 pointing to XI(i.e IP address of XI) (This RFC Destination name shd be same as the Receiver LS name)=> X7ACLNT100 is my RFC destination.
Step 3: In SALE Tcode under Modelling and Implementing Bussiness Processes-> maintain Disribution Model and Distribute Views.
a)Click on that ,it shall take to Tcode BD64 ,where u can create a Distribution Model.
b)Once you create that ADD MESSAGE type(You have the button at the top), there it shall ask for Receiver and Sender LS and Message type.
c)In Menu Bar EDIT->Generate Partner Profile.
Click on that and press Execute .
This shall create 2 partner profile X7ACLNT100 and QZACLNT100 ,X7ACLNT100(this is the partner number for QZA system) shall have the outbound parameter as CREMAS, and QZACLNT100 is created with no parameters ,you need not worry .
d) Click EDIT->MODEL VIEW->Distribute.
This shall distribute the model and you can see the distribution mode aslo getting created in XI system.
This configuration shall surely help u out as it worked out for me.
Configurations required for IDocs in R/3
In your XI system, you need to do the following.
1. Create a RFC destination to your R/3 system
2. Create a port in IDX1 of your XI system and use the RFC destination in step1.
3. Try importing a idoc metadata thru idx2 transaction to check whether the configuration is correct.
4. In your SLD configure the technical system and business system. The technical system should hold the logical system name you have in your R/3 system client.
5. Import the business system and you can use it in your configuration scenario.
Please also refer below links for details.
Go thru this-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
SAP R3 ->Legacy system including master data using XI
Regards,
Phani

IDOC not receiving in XI

Hi -
Using PI 7.0 and checked all the configurations and read all the related blogs but i don't see the IDOC coming into XI.
Checked the SM58 on R3 and does not show any errors.
I checked the WE02 on XI system and shows a status of 60 and 56. Status 60 says "Basic Type MATMAS05 does not exist" which is true because it does not exist on the XI system but exists on the r3 system.
All the ports on xi and r3 system seem to be fine. i pushed the idoc and shows a status '03' on the r3 side.
Any tips/ideas to solve the issue are greatly appreciated.
Thanks,
Tirumal

Hi,
Go to SMQ2 and try to check the Queue Status .
Did you check this SAP note I referred earlier- 940313
Also -http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
GO thru each step ..because it will help you to resolve the problem.
Hints-
1) check WE02 and check the status of Idoc in the R/3 system. Is it sent to XI box/port correctly ?check its control record info , in WE19
2) Did you check Partner Profiles - for outbound parameters -check out this
3) Check the SM59 entry in SAP system - pointing to XI box.
4) Check IDX5 transaction in XI box, if eevrything is success in R/3 system
5) check the Business system in XI - is it pointing to correct R/3 system.
Hope this helps,
Regards,
Moorthy

IDOC not Received at XI

Hello folks ,
I need to send a idoc from r/3 to xi. i have made all the necessary configuration in r/3. iThis s a production sytem ....have checked on R/3the IDOC is succesful at we02
checked BD87- IDoc sent to SAP system or external program
SM58 no errors...
wen i checked at XI with the particular IDOC number iI dont find an entry what could be the reason .How to resolve the same.
Regards,
Robin

Thanks guys .. thanks for ur quick response
Solution : Had to run this job RBDMOIND ...(particular IDOC NO, was not sent to XI )
Edited by: Robin on Jul 30, 2010 3:22 PM
Edited by: Robin on Jul 30, 2010 4:43 PM

IDOC not received in XI; error in SM58 of sending system

Hello everybody,
we got a SAP CRM sending a "generated" IDOC.
(IDOC-Type: CRMXIF_PARTNER_SAVE01)
The IDOC seemes to be rejected by XI because
SM58 shows:
- No Service for System Binding_Error Client ...
- function: IDOC_INBOUND_ASYNCHRONOUS
All settings (IDX1, IDX2, ID, IR) are OK!!
All reimports (delete & import IDOC) are made!!
(btw: we got several other IDOCs-Types that work fine!)
Could it be, that the IDOC-type is GENERATED?
Regards Mario

Hi Mario,
Solution for this error is provided in link given below
of Problem Analysis Guide "Sending an IDoc through XI Failed "
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Also have you set adapter specific identifiers?
For the same, refer question 3 (integration engine section)
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Regards,
Abhy

Idoc not received in receiver , sender shows successful in WE02

Hello,
I am sending Vendor from Production to Quality , sender system shows in WE02, idoc status as sucessful. I have checked all ALE settings and they are perfectly fine.
But in receving system I am not able to receive it. In sender , transaction SM58 is showing error:
No authorization to send IDocs with message type CREMAS
Can any one suggest what is the soultion for this scenario?
Thanks,
Madhura

Hello,
Solution for above problem:
After executing transcation SM58, screen will show Function Module as IDOC_INBOUND_ASYNCHRONOUS , put cursor on FM IDOC_INBOUND_ASYNCHRONOUS
, go to EDIT->Execute LUW.
This will solve the problem of authorization.
Thanks,
Madhura

SAP ERP - SAP ME - iDOCS - Not received

Similar Messages

Maybe you are looking for