SAP System is not assigned to the leading

Hi,
I am trying to configure JOB DOCUMENTATION in "Solution Manager / JSM", under tab "SYSTEMS" when assigning "Logical Components" on the bottom of this screen there is a table "Systems", when in this part trying to ativate "Monitoring" getting following error:
1. System is not assigned to the leading
Can someone pl. help to understand how to assign a system as "Leading:
2. Under tab "Contact Person" I am not able to assign "email, and Telephone**" fields under "communication" are gray, and cannot be modify.
Please help
sahmad

Hi
have you properly configured smsy and maintain the PRD etc roles in it ......pls chk this tutor
http://service.sap.com/~sapidb/011000358700001911452008E.sim
Pls check this notes and links
Note 1054005 - FAQ: Job Scheduling Management with SAP Solution Manager
Note 1117355 - Job Scheduling Management: Work Center
Note 1111310 - Job Scheduling Management: Extended Configuration
Links:-
   Scheduling
   /people/martin.lauer/blog/2008/01/03/job-scheduling-management-with-sap-solution-manager
Usage Tutorials (http://service.sap.com/rkt-solman)
Job Import
                    http://service.sap.com/~sapidb/011000358700001975402008E/index.htm
Job Request
                    http://service.sap.com/~sapidb/011000358700001975952008E/index.htm
Job Documentation
                    http://service.sap.com/~sapidb/011000358700000332842009E/index.htm
Job Documentation Templates
                    http://service.sap.com/~sapidb/011000358700001911082008E.sim
Job Scheduling
                    http://service.sap.com/~sapidb/011000358700001911452008E.sim
Job Monitoring
                    http://service.sap.com/~sapidb/011000358700001976052008E/index.htm
Work Center
                    http://service.sap.com/~sapidb/011000358700001975932008E/index.htm
                    http://service.sap.com/~sapidb/011000358700001911442008E.sim
Hope it helps
regards
Prakhar

Similar Messages

SAP System is not the original system of the object being edited

Hi All,
We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
How we can resolve this situation.

Hello Guys,
Thks for your input.
@Vinod,
We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its a replica of old dev to nev dev with SID change.
@Arjun,
I already check TADIR table and and its pointing to new SID.
@Ashok,
As i said earlier,post intallation is already completed.
Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
Thx,Nilesh

SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

Hello All,
We are using a two tier architecture.
Our Corp server calls the refinery server.
Our CORP MII server uses user id abc_user to connect to the refinery data server.
The user id abc_user has the SAP_xMII_Dynamic_Query role.
The data server also has the checkbox for allow dynamic query enabled.
But we are still getting the following error
Error has occurred while processing data stream
Dynamic Query role is not assigned to the Data Server; Use query template
Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
Thanks,
Kiran

Thanks Anushree !!
I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
But we even needed to add the role to the data server.
Thanks,
Kiran

System is not picking up the WBS element from Asset in PO.

Hi,
While creating Purchase Order with account assignment category
as "A"(i.e.Asset), system is not picking up the WBS element from Asset
Master, even though it is defined in the asset master.
Please help.
Thanks,
Ninad

Hello Ninad,
Please, see the SAP Note 21583. I think it might be of help for your case.
Best regards,
Esther.

System is not assigned to a host problem

HI,
we have installed solman EHp1 7 dual stack and configuration is done using SOLMAN_SETUP. but while using to download of support packages using maintenance optimizer, we are getting the error "system is not assigned to a host" despite filling all the fields in SMSY for both ABAP and JAVA.
Kindly request to advice.

Hi,
You could check the notes and procedure mentioned in the thread:
Re: Error when downloading EHP 4 for ECC - "System is not assigned to a host"
Also in SMSY -> System Components -> Java -> <sid> check if the host assignment is complete.
Regards,
Srikishan

Cause is mentioned as : "The cause for this error is due to person name is not assigned to the FND_USER."

Cause is mentioned as : "The cause for this error is due to person name is not assigned to the FND_USER."
Do we need to attach the person name of employee whose reverse Global deployment we are doing or the person name of the person who is doing this transaction.
Thanks & Regards,
Kirti Mohan Sharma

You just need to attach the person to the FND User. System Administrator responsibility - Security - User screen.
After you have linked the person, you can check the table
Select * from FND_USER
Where user_name = '<user_name>';
Cheers,
Vignesh

SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!

Hi Experts,
Am doing ALE setup for sending sales orders IDOC out to a 3rd party system.
I have created the logical system and attached to a transport. Here we dont have necessity of linking a client to this logical system!
Then, I created a Distribution Model (CDM) View in BD64 transaction and added Message types to it, but SAP/System did NOT prompt me for a transport request!! Pls. let me know
1) Is it usual with CDMs creation that NOT prompting for a transport? if so, How my CDM/changes will be moved to QA/Production?
2) If not, Why system did not prompted me for a transport?
3) Then How Can I attach my CDM/changes to a transport?
Thank you

I don't think we get a TR prompt when adding a view in BD64.
You've to individually maintain the CDM view in QAS & PROD. Also there is a functionality to "distribute" the CDM view, are you looking for something similar ?

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

Start with reinstalling Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1 Access the App Store to download Mountain Lion or Yosemite. Mavericks is no longer available since the release of Yosemite. If you purchased Mountain Lion from the App Store, then you can redownload it via your Purchases page in App Store. If not, then you will need to purchase it from Apple;
Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

Restrict user not to modify the lead when status is CLOSED

Hi,
Is it possible to configure the system not to allow any modifications to the lead once the status is set to CLOSED (one of the user status)?
Any input is appreciated.
Regards,
Venu.

Hi,
This is little interesting!
Now Im not able to set the REASON though we havent saved the lead
Initially problem didn't get solved as suggested. i.e., Business Transaction Control -> No Change Allowed (Set Influence to Allowed)
I don't know why?
But i'm able to solve by setting LNCH (No Change Allowed) for status Closed in User Status Profile (last column in the table i.e., Trans).
But now because of these settings as soon as i change the lead status to CLOSED before setting a reason it self system is internally making the lead 'transferred' and hence not saving the REASON.
How to configure the lead in such a way that: When i set the lead status CLOSED, i should be able to set the REASON for the corresponding status and should be able to save now. From next time onwards system should not allow user to edit the lead as the status is CLOSED.
Please suggest whether its possible with configuration. If not then i want to know why SAP reverting back the changes we are doing for lead "after setting status to CLOSED and before clicking on SAVE".
Regards,
Venu.

System is not recorded in the system list

Hi all,
I am using BI 7 system which is connected with a source system of SAP R/3 system and there is no problem in the connectivity between these sytems.
When I tried to save a user defined ztable in BI system it shows an error below and also the description the error message would be. Please go through the following the let me provide the solution.
error: System BI& is not recorded in the system list.
Explaination of the error follows:
System BI7 is not recorded in the system list
Message no: TR638
Diagnosis
The current transport route configuration does not have the system BI7 in this current system list.
The transport route configuration was probably not maintained after the system setup, or was changed incorrectly.
Procedure for system Administration
The system Administration need to change, activate and distribute the transport route configuration accordingly. All systtems in the transport domain must be in the configuration.
Help this to solve.
--regards,
Durai.S

Hi,
Check in STMS whether your transport route is configured correctly or not. As per error message there is problem in your transport route.
Thanks
Sunny

Business system * is not assigned to a business system group

I am running XI3.0 (SP12), Oracle 9.2.0.6 on a Windows 2003 Cluster Server.
I am trying to import some config from the Integration Directory from Dev into QA but I am getting the following error:
IMPORT XI 3.0 Design Objects
Business system XIT is not assigned to a business system group with the ID (XISystemGroup)
I have copied my Dev SLD into my QA SLD.
Has anyone else come across the error??

Barry,
You should ideally have assigned Business systems in ur QA landscape to 1 group & Business systems in your dev landscape to another group. Also , hope you have created transport targets for all ur Business systems in dev environment.In ur QA SLD , you should have two entries for each business system , something like
DEV-BS-1 -> transport target -> QA-BS-1
QA-BS-1 -> transport source -> DEV-BS-1
Thanks
Saravana

"SAP Systems" selection not showing in SAPinst welcome screen

I recently purchased a NetWeaver Development subscription and am following the installation guide for SAP NetWeaver 2004s SR3 ABAP+Java on Windows with MS SQL Server. However, in the Welcome menu of SAPinst under the NetWeaver selection, I am not seeing the "SAP Systems" selection as it is described in section 4.3 "Installing a SAP system using SAPinst". I only see the selections "Standalone Engines", "Optional Standalone Units", and "Software Life-Cycle Options". Could someone please tell me how I can install a "Central System" on a Windows 2003 Server? Thanks.

Hi and thank you very much for quick reply...
We have also concluded that the note suddently is "gone"?
So the deal is to install a SR2 and then upgrade...Lucky i still have SR2 installs...
I wonder what the solution would be if we didn't still had the install files for SR2. And what is the official
reaction from SAP when installing SR2 win 32 bit for a customer, since the customer do not currently supports 64bit?
I have tried to talk the customer intto 64 bit, but no luck so fare
On the other hand if they have a large environment running WM ware, then it can be a big job to upgrade!
Thank you very much...

Source of Bex Browser SAP system entries (not saplogon.ini?)

I hope someone could help to clarify what I presume is a fairly simple query.
I will run through the steps I take to reach my point of confusion:
1. I navigate to "Start Menu\Programs\Business Explorer\Business Explorer (SAP BW 3.x)" and open the Browser (SAP BW 3.x).
2. A "SAP Logon" window (similar to a cut-down version of SAP GUI's SAP Logon program) opens, I select the appropriate BW system from the list and logon. I have just ticked the box for "Use Selected System as Default" at this stage.
3. The BW Browser opens, I navigate to ANY report and double-click to open.
4. Microsoft Excel 2003 opens in the background, I can see the Business Explorer add-on as well.
Now this is the problem stage at step 5 and a complete oddity at step 6....
5. Another "SAP Logon at SID" window opens, but if I enter my logon details again I get an RFC_ERROR_PROGRAM error.
6. At this point I repeat step 3 above but instead of typing in my password at step 5, I click the "System" button which opens the mini "SAP Logon" windows for BW Browser. It is here I notice that all the SAP system entries which I presumed were populated from saplogon.ini at C:\Windows, are in fact from a much older version of the saplogon.ini I previously had.
So my real question is about step 6, why/how are the SAP system entries being populated from an older version of saplogon.ini? Does the BW Browser cache these entries somewhere else locally?
For reference, I am running SAP GUI 710 at Patch Level 12 & BW Add-on Patch Level 4 for 710. I have tried updating everything to the latest version/patch levels but with the exact same result. I've done a complete rebuild before a new 710 install and still can't figure this out.
Thank you.

Hi David,
Thank you for providing details of those SAP Notes, unfortunately they haven't helped to resolve the issue.
We do not use an Environment Variable to make another SAPLOGON.ini file known to the SAP Logon Control.
On running the trace, it appears quite apparent that SAPLOGON.ini in C:\Windows is being utilised. My first thought on seeing the trace file was that a SAPLOGON.ini file might be present in the "current directory" identified as N:\My Documents, but this wasn't the case.
Steps 1 and 2 are void, the standard .ini file should be getting picked up in step 3:
Wed Aug 05 15:09:45 2009 0001 DpaPersPar::BasicInitialization() current directory N:\My Documents
Wed Aug 05 15:09:45 2009 0001 DpaPersPar::BasicInitialization() SAPLOGON_INI_FILE not set; use SAPLOGON.INI
Any other thoughts?
Thanks.
Simon

J2EE Engine JC00 of SAP System did not come up after 200 seconds waiting fo

Hi,
In the process of installing SAP WEBAS for java, during the last phase of installaion I am getting this problem
J2EE Engine JC00 of SAP System EPD did not come after 200 seconds waiting for another 20 seconds.
my platform is
AIX 5.3
jsdk jsdk1.4.2 64 bit
Can any one help me out as I am stuck and getting no help from anywhere
pradeep

Hi Pradeep,
Check your trace files in the /usr/sap/<SID>/DVE.../work directory (dev_bootstrap, dev_disp, log_bootstrap etc..) for any errors preventing J2EE from starting.
It can be related to incorrect java path in the instance profile, incorrect JDK (see the OSS note # 716927).
You can restart J2EE engine via SMICM once you clarify the issue.
Regards,
Mike

Logical System Name Not appearing in the Business System

Hi,
Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
Please also note that Business System is of the ROLE: Integration server.
When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
Can anyone please help us to update the 'Logical system name' in Business System in SLD?
Regards,
Rehan

Hi Sunil,
I followed your link till
Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
When I go back to Business system again its not showing the Logical system name in Integration tab.
regards,
rehan

SAP System is not assigned to the leading

Similar Messages

Maybe you are looking for