SAPConnect connectors can't be configured in MMC

I successfully installed SAPConnect and created my queues, but now I can't manage the connectors in MMC. I'm able to create them, see the RFCIn and RFCOut services, etc., but I can't modify any parameters in the connectors. The snap-in won't initialize. I get an error "ResultViews.initialize, Error Code: 0x8000001E7, Attempt to access invalid address" when I click on any of the connectors. When I try to right-click them to get their properties, MMC just hangs. I've found some OSS notes that deal with snap-in errors and have followed their instructions to no avail. Anyone have any ideas???
Thanks,
Eric

I assume you are talking about the "Properties" tab and not the "Settings" tab.
You can only change the "Properties". I don't think you can change item that you show in your picture
I do not know why you can't scan
This is the Properties" tab that you can change
You can see the differant from not Admin and Admin
NOT as Admin As Admin
Omar

Similar Messages

SCOM 2012 R2 Error The connector the module is configured for no longer exists

Hi All,
The Microsoft Operations Manager Connector Framework Alert Forwarding module failed to mark an alert for forwarding because the connector the module is configured for no longer exists.
Connector Id: 57a14deb-a74b-520e-ac32-ba8d340d112d

Hi Mark,
You can try the following steps,
This is because we have deleted a connector that still had a live subscription associated with it. We need to go and delete that subscription to clean this up. The problem is – the connector is gone, so the subscription is no longer available
in the UI.
Therefore – we will have to delete it manually. This subscription (as all subscriptions) is kept in the “Notifications Internal Library” MP. You need to export that MP to XML. FIRST MAKE A BACKUP COPY OF THIS FILE IN CASE YOU MESS UP, then
open it for editing in Notepad, or your XML editor of choice.
All subscriptions in this MP are kept in the <Monitoring> <Rules> section. To identify which connector subscription RULE is causing the problem – you can search for the connector ID, from the event 11502 above. In my example – my connector
ID from this event is: b7a64deb-f7ff-440e-bc30-d08d340dfe8d.
So – I search the XML for that string – and find b7a64deb-f7ff-440e-bc30-d08d340dfe8d in the <WriteActions> section of a specific <Rule>:
<WriteActions>
<WriteAction ID="WA" TypeID="SystemCenter!Microsoft.SystemCenter.ConnectorFrameworkAlertWriteAction">
<ConnectorId>{b7a64deb-f7ff-440e-bc30-d08d340dfe8d}</ConnectorId>
</WriteAction>
</WriteActions>
Good – I have identified the problem. Now – I need to do two things:
Find the rule ID – to identify the display string associated with it… then delete that display string.
Delete the orphaned subscription rule.
So – I move up in the XML section of this rule – and I find my Rule ID. (here is mine:)
<Rule ID="ProductConnectorSubscription2850f8e3_afe7_4c36_84d2_ee258bd086eb"
I then search for the part above which I bolded in blue (yours will be different – search for your string)
What this finds – is the display string section of the XML – which maps this GUID ID to the common name that you gave the subscription. (here is mine:)
<DisplayString ElementID="ProductConnectorSubscription2850f8e3_afe7_4c36_84d2_ee258bd086eb">
<Name>Process All New Alerts</Name>
</DisplayString>
So – I need to DELETE this section from the XML…. just the section above, from my very specific <DisplayString ElementID="ProductConnectorSubscription2850f8e3<GUID> line, to the very next </DisplayString>.
Next – I need to delete the entire <rule> which contains the subscription we want to remove. Mine will be from:
<Rule ID="ProductConnectorSubscription<GUID> line to the very next </Rule>
When you are happy – you can import this XML MP back into the management group. It should import with no errors. If you get an error – you made a mistake when editing the XML. You can look on the RMS event log for the specific problem – there
will be a critical event there if it fails to import.
second part for this link
http://blogs.technet.com/b/kevinholman/archive/2009/09/10/removing-an-old-product-connector.aspx
Regards, Ibrahim Hamdy

How can i wrote configuration file in Log4j

iam new log4j .i have seen one small programme in log4j examples folder ..i e. shown below
Sort.java
=====
package examples;
import org.apache.log4j.PropertyConfigurator;
import org.apache.log4j.Logger;
import org.apache.log4j.Priority;
Example code for log4j to viewed in conjunction with the {@link
examples.SortAlgo SortAlgo} class.
This program expects a configuration file name as its first
argument, and the size of the array to sort as the second and last
argument. See its source
code for more details.
Play around with different values in the configuration file and
watch the changing behavior.
Example configuration files can be found in <a
href="doc-files/sort1.properties">sort1.properties</a>, <a
href="doc-files/sort2.properties">sort2.properties</a>, <a
href="doc-files/sort3.properties">sort3.properties</a> and <a
href="doc-files/sort4.properties">sort4.properties</a> are supplied with the
package.
If you are also interested in logging performance, then have
look at the {@link org.apache.log4j.performance.Logging} class.
@author Ceki Gülcü */
public class Sort {
static Logger logger = Logger.getLogger(Sort.class.getName());
public static void main(String[] args) {
 if(args.length != 2) {
 usage("Incorrect number of parameters.");
 int arraySize = -1;
try {
 arraySize = Integer.valueOf(args[1]).intValue();
 if(arraySize <= 0)
 usage("Negative array size.");
catch(java.lang.NumberFormatException e) {
usage("Could not number format ["+args[1]+"].");
PropertyConfigurator.configure(args[0]);
int[] intArray = new int[arraySize];
logger.info("Populating an array of " + arraySize + " elements in" +" reverse order.");
for(int i = arraySize -1 ; i >= 0; i--) {
 intArray[i] = arraySize - i - 1;
SortAlgo sa1 = new SortAlgo(intArray);
sa1.bubbleSort();
sa1.dump();
// We intentionally initilize sa2 with null.
SortAlgo sa2 = new SortAlgo(null);
logger.info("The next log statement should be an error message.");
sa2.dump();
logger.info("Exiting main method.");
static void usage(String errMsg) {
 System.err.println(errMsg);
 System.err.println("\nUsage: java org.apache.examples.Sort " + "configFile ARRAY_SIZE\n"+
"where configFile is a configuration file\n"+" ARRAY_SIZE is a positive integer.\n");
System.exit(1);
and
SortAlgo.java
==========
package examples;
import org.apache.log4j.Category;
import org.apache.log4j.NDC;
Example code for log4j to viewed in conjunction with the {@link
examples.Sort Sort} class.
SortAlgo uses the bubble sort algorithm to sort an integer
array. See also its source
code.
@author Ceki Gülcü */
public class SortAlgo {
final static String className = SortAlgo.class.getName();
final static Category CAT = Category.getInstance(className);
final static Category OUTER = Category.getInstance(className + ".OUTER");
final static Category INNER = Category.getInstance(className + ".INNER");
final static Category DUMP = Category.getInstance(className + ".DUMP");
final static Category SWAP = Category.getInstance(className + ".SWAP");
int[] intArray;
SortAlgo(int[] intArray) {
this.intArray = intArray;
void bubbleSort() {
CAT.info( "Entered the sort method.");
for(int i = intArray.length -1; i >= 0 ; i--) {
NDC.push("i=" + i);
OUTER.debug("in outer loop.");
for(int j = 0; j < i; j++) {
 NDC.push("j=" + j);
 // It is poor practice to ship code with log staments in tight loops.
 // We do it anyway in this example.
 INNER.debug( "in inner loop.");
if(intArray[j] > intArray[j+1])
 swap(j, j+1);
 NDC.pop();
NDC.pop();
void dump() {
if(! (this.intArray instanceof int[])) {
DUMP.error("Tried to dump an uninitialized array.");
return;
DUMP.info("Dump of integer array:");
for(int i = 0; i < this.intArray.length; i++) {
DUMP.info("Element [" + i + "]=" + this.intArray);
void swap(int l, int r) {
// It is poor practice to ship code with log staments in tight
// loops or code called potentially millions of times.
SWAP.debug( "Swapping intArray["+l+"]=" + intArray[l] +
 " and intArray["+r+"]=" + intArray[r]);
int temp = this.intArray[l];
this.intArray[l] = this.intArray[r];
this.intArray[r] = temp;
This program expects a configuration file name as its first
argument, and the size of the array to sort as the second and last
argument. See its source
code for more details.
please help me how can write that configuration file
thanks

Hi bala,
check that log4j manual I pointed to in yer previous thread.
This is a pot-boiler config file... Copy it into some file say "props.conf" and use it.
# Set root logger level to DEBUG and its only appender to A1.
log4j.rootLogger=DEBUG, A1
# A1 is set to be a ConsoleAppender.
log4j.appender.A1=org.apache.log4j.ConsoleAppender
# A1 uses PatternLayout.
log4j.appender.A1.layout=org.apache.log4j.PatternLayout
log4j.appender.A1.layout.ConversionPattern=%-4r [%t] %-5p %c %x - %m%nCheers,

What are the different types of bind that we can use to configure COREid?

Hi
What are the different types of LDAP bind that we can use to configure COREid?
Thanks for your input.

(http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/idconfig.htm#BABGAECB)
7.5.2 Creating an LDAP Directory Server Profile

Can not install ITunes on my laptop....no itunes are remaining on the laptop. Error says itunes can not be configured.

There is no ITUnes grogra on my laptop....so nothing to delete. ITunes error says that it can not be configured. Have tried dumping my temp file and restarting....no help.

Hi jackdaniels63,
Welcome to Apple Support Communities.
Try following along with the article linked below, which will have you completely remove iTunes and it's related components before trying to reinstall iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
-Jason

In an iPhone 3GS (or 4G), can a user configure the WiFi power-save to extend battery life?

In an iPhone 3GS (or 4G when I upgrade), can a user configure the WiFi power-save operation to extend the battery life? For example: Can a user turn on/off WiFi power-save operation? Can a user specify WiFi sleep duration? Thanks in advance for any helpful advice.

Yikes! Thanks, Templeton. Do WiFi app programmers have control over power-save settings? For example, can a first VoIP app be more energy-efficient than a second VoIP app?

Can spotlight be configured to search iWork templates (it will search MS Word templates)?

Can spotlight be configured to search iWork templates (it will search MS Word templates)?
Thank you for your help.
Derek Cassells

See the responses in your other post:
http://discussions.apple.com/thread.jspa?threadID=1359292&tstart=0

Can't parse configuration jsf-ri-runtime.xml

When I try to do the Example about JSF in (How To Use JSF with JDeveloper 10g) and run it I found this problem
SEVERE: Can't parse configuration file:classloader:/com/sun/faces/jsf-ri-runtime.xml
and I have jDeveloper ver 9.0.5.2
and java ver 1.4.2.04
Plz Help
Alaa

I installed the 9.052 build of JDeveloper and it solved the problem. Per forum thread: Re: JSF Configuration error in JDeveloper10g

Can't parse configuration file

hi i'm trying to deploy an application on oc4j 10.1.3.1.0. i use Eclipse IDE and ant for deploy.
i have this:
[java] java.rmi.RemoteException: bindWebApp() failed!; nested exception is:
[java] oracle.oc4j.admin.internal.DeployerException: Can't parse configuration file:code-source:/C:/JDeveloper/j2ee/home/applib/adf-faces-impl.jar!/META-INF/faces-config.xml
[java] at com.evermind.server.administration.DefaultApplicationServerAdministrator.bindWebApp(DefaultApplicationServerAdministrator.java:420)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java] at java.lang.reflect.Method.invoke(Method.java:585)
[java] at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
[java] at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
[java] at java.lang.Thread.run(Thread.java:595)
[java] Caused by: oracle.oc4j.admin.internal.DeployerException: Can't parse configuration file:code-source:/C:/JDeveloper/j2ee/home/applib/adf-faces-impl.jar!/META-INF/faces-config.xml
[java] at com.sun.faces.config.ConfigureListener.parse(ConfigureListener.java:1224)
[java] at com.sun.faces.config.ConfigureListener.contextInitialized(ConfigureListener.java:321)
[java] at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1130)
[java] at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:738)
[java] at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
[java] at com.evermind.server.Application.getHttpApplication(Application.java:545)
[java] at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1990)
[java] at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1909)
[java] at com.evermind.server.http.HttpSite.addHttpApplication(HttpSite.java:1606)
[java] at oracle.oc4j.admin.internal.WebApplicationBinder.bindWebApp(WebApplicationBinder.java:238)
[java] at com.evermind.server.administration.DefaultApplicationServerAdministrator.bindWebApp(DefaultApplicationServerAdministrator.java:418)
[java] ... 7 more
[java] Error: bindWebApp() failed!; nested exception is:
[java] oracle.oc4j.admin.internal.DeployerException: Can't parse configuration file:code-source:/C:/JDeveloper/j2ee/home/applib/adf-faces-impl.jar!/META-INF/faces-config.xml

I had similar problems with jsf-impl.jar.
Sun do provide the xsd schemas locally inside the jar files so internet connection
should not be required if parser is configured right.
In my case I removed commons-digester-1.6.jar from my application and replaced it
with commons-digester.jar supplied by JDeveloper builtin library named Commons Digester 1.5.
Digester was configuring the (oracle) xerces parser.

Can I simultaneously configure a device to more than one task?

Can I simultaneously configure a device to more than one task? I am trying to trigger on some of the input data. When I tried to configure the same device to more than one task, I get an error:
Error -10408 occurred at Digital Group Config.
Possible reasons:
NI-DAQ LV: The specified channel is in use.
I have attached a copy of my VI. In the first and second sequences I am using device 1.
Attachments:
Can_I_simultaneously_configure_a_device.doc ‏19 KB

Hello;
The best way to have multiple tasks running on the same DAQ device is by syncronizing those in the hardware level. What I mean by that is, to use the same clock pulse train to clock the different tasks.
For instance, in case you want to do Analog Input and Analo Output at the same time, you can use the AI Start Scan (which is the clock pulse train that will clock the analog input task) to be routed to the AO Update clock (which is the clock that controls the Analog Output tasks of your device). You can extend that idea for counter operations as well.
For digital operations, if you are not using one of the digital boards that support strobed operations, such as the 653x ones, you won't be able to synchronize the digital tasks with the analg tasks, s
ince the digital ports updates through Software calls only.
You are probably getting that error because you are trying to use the Digital Group Config.vi (or some other VI that calls the Digital Config.vi) with a board that doesn't support handshaking operations, such as the MIO ones.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

Album "Edit" function can't be configured to write photos on SD card

Edit function of Album application, as well as other edition applications (Speedseed, etc.) can't be configured to use SD card, and write editing results into internal memory.

A similar issue-- I don't like it that edited pix are saved in an Edited folder and not in the main album. Can I change this? When trying to upload in FB, the Edited folder cannot be seen or selected, but only "photo roll". Worse, that folder cannot be found by Google+ and thus are not backed up there.

How can SAP be configured to prevent users from consuming locks?

How can SAP be configured to prevent users from consuming locks?
The issue is that we want to prevent users to use upto maximum locks and so that we will not get lock table overflow issue. I know that we can assign parameter "enque/table_size" a good amount of value. But it is not for any specific user.
Also want to alert in CCMS if any user reaches to its maximum speficified limit of locks.
Thanks
Gopesh

You cannot set a limit of locks per user. There are two ways to reduce/control the number of locks:
- change fewer records within one transaction
- cover more records with one lock using wildcards
Basically it is an application / development issue.
Best regards, Michael

Can MRPG be configured in UCCE

Can MRPG be configured in UCCE? If yes, can you let me know the configuration steps and the interface that will be used between UCCE and MRPG

Hi Jennifer,
check page 93 of the deployment guide of IPCC.
below is the link for your quick ref.
IPCC Deployment Guide.
http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&ved=0CDgQFjAD&url=http%3A%2F%2Fwww.cisco.com%2Fen%2FUS%2Fdocs%2Fvoice_ip_comm%2Fcust_contact%2Fcontact_center%2Fcisco_interaction_manager%2Fcim_432%2Fuser%2Fguide%2Fcisco_im432deploymentguide.pdf&ei=egsnUtOnEMq6lQXv74GwAw&usg=AFQjCNHrkmgc3UBZgxO6q1BHbJ0grpV4tg&bvm=bv.51495398,d.dGI
Regards
Sandeep

Can i keep configuration settings (polling frequency...) outside BPEL

Dear All,
Can i keep configuration settings (polling frequency and other which are typically set in BPEL adapter outside BPEL
so that at runtime BPEL will look at this configuration file instead of settings inside BPEL.
Regards
Arc

I think you can. If you define them as properties in the Adapter wsdl (by prepending a $), then you can set their values in bpel.xml. And the values in bpel.xml are exposed in the bpel console under the descriptors link. so you can modify these values at runtime, without having to undeploy the bpel process.
--Amit

Airport extreme software will not install on vista, how can i still configure the router?

airport extreme software will not install on vista, how can i still configure the router? Trying to help someone with vista get an airpot extreme configured. 10.0.1.1 does not work, the software will not install correctly on their vista machine. How can I get into the base tation and lock it down?

Hi - Vista can be tricky - I need more info to see if I can be of some help - first, is the Vista machine a desktop or a laptop and is it fully up to date with Windows Update (sp2 or higher)? - next, are you trying to install Airport Utility version 5.5.3 which is the correct one for Vista? - and finally, what do you mean "it will not install" - what kind of error messages or evidence are you getting?

SAPConnect connectors can't be configured in MMC

Similar Messages

Maybe you are looking for