Satellite L300D-12U - Two issues after Ubuntu Linux installation

Hello,
I have installed Ubuntu 8.10 on my brand new Satellite L300D-12 U.
Up to now everything works fine but there are two things disturbing me.
1. I have problem with Suspend to RAM. It does not work. If I use the standby option, the screen becomes black but the notebook is still running (you can hear it).
Furthermore nothing happens when I press the Power Button to exit the standby option.
I have to completely shut down the notebook and restart to be back in Ubuntu.
Maybe anybody have some ideas how can I solve the problem?
My /etc/default/acpi-support have these entries:
# Comment the next line to disable ACPI suspend to RAM
ACPI_SLEEP=true
# Comment the next line to disable suspend to disk
ACPI_HIBERNATE=true
# Change the following to "standby" to use ACPI S1 sleep, rather than S3.
# This will save less power, but may work on more machines
# ACPI_SLEEP_MODE=mem
ACPI_SLEEP_MODE=standby
2. Battery Life
My current maximum battery life is 1:10 hours. On windows it is > 2 hours. Maybe anybody have some configuration ideas to increase the battery time under Ubuntu?
Any help is appreciated.
Thanks in advance.
Regards,
Manuel

Hello Manuel
I am really sceptic about Linux support here. I've heard that Toshiba will start some support with Linux but obviously it is not started yet.
If nobody here can offer some help I recommend you to discuss this on some Linux forum. You have more chance to get some help there.

Similar Messages

Satellite L300D: error loading operating system - Ubuntu Linux

In the easiest way, could any body assist me with 'error loading operating system'!
Completely screwed???

Did u check if your CDs burned properly?
Which distribution are you installing?

Exchange 2010 - Issues after rollup update installation.

Exchange 2010 - Issues after rollup update installation.
We are having issues since we installed SP3 Rollup updates 1, 2, 3, and 4.
Issue1 - People get an error messages constantly popping up when they access our webmail. The error messages are:
An unexpected error occurred and your request couldn't be handled. and
Your network connection is unavailable. Please reconnect and try again.
Issue2 - When I open the Exchange Management Shell I get the following error:
Failed to connect to an Exchange server in the current site. Enter the server FQDN where you want to connect.
Issue3 - We have been using third party software to filter spam email. It is installed on our Exchange server. Since the updates it has not been working and we have tons of spam coming through. I dont think that this issue is that important at the moment and
hope that it will be fixed after resolving issues 1 and 2.
We uninstalled all four rollup updates in hopes that everything would go back to normal but it hasnt. We still have the same issues.
Currently we are running Exchange 2010 SP3 on 2008R2 SP1.
Please help.
Thanks.
Greg

Hi,
Based on the description, you got the error below when you tried to accessed OWA after rollup update installation.
"An unexpected error occurred and your request couldn't be handled, and Your network connection is unavailable. Please reconnect and try again."
For this issue, I recommend you check the OWA virtual directory to see if "Redirect requests to this destination" is checked. If it is checked, please uncheck the option. Then please restart IIS service to check the result.
Open IIS Manager -> owa -> HTTP Redirect -> uncheck "Redirect requests to this destination:"
Best regards,
Belinda
Belinda Ma
TechNet Community Support

EAS Startup issue after OEPM 11 Installation and Configuration

Hi All,
EAS server is not starting up after the successfull installation and configuration of OEPM 11.1.1.2
Provider Services and Shared Services started fine and i was able to login to Shared Services console
During eas startup individually from the startup script i see this catalina.out file with some errors..
By this i understand that there is some problem in selecting the required JRE as i see both JRE and JRE-64 under the
common folder. Anybody has come across this issue while startup of EAS 11.1.1.2
Any help would be accepted...
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
execve(): No such file or directory
Error trying to exec $HYPERION_HOME/common/JRE/Sun/1.5.0/bin/sparcv9/java.
Check if file exists and permissions are set correctly.
Failed to start a 64-bit JVM process from a 32-bit JVM.
Verify all necessary J2SE components have been installed.
(Solaris SPARC 64-bit components must be installed after 32-bit components.)
Thanks,

Hi,
1. I assume your system is 64 bit.
2. I think you are installing the 64 bit application. In that case you would get both the folders i.e JRE and JRE-64.
3. Seconldy, I would like to set the permissions of the folders to everyone and give full control and test again. ( to do this, right cick ->security ->add 'everyone' -> give him full control and test).
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Re: Satellite L30D - Low screen resolution after Windows 7 installation

I have installed Windows 7 on my Satellite L30D. Since this installation, I cannot have a better resolkuton than 1024x768.*It was much better with Windows Vista.
I have downloaded the latest ATI driver. No effect. I cannot find the Catalyst Control Center as well. What can I do?

Hi
The Satellite L30D isnt known to me...
Do you mean Satellite L30 or Satellite L300D?
Normally you have to install the display driver if you want to use higher screen resolutions but check the specifications of your internal display first. Maybe the native screen resolution is 1024x768 and you cant use a higher one.
You can download all drivers for your notebook on the Toshiba website!!! Dont use the drivers from ATI directly, they are not designed for mobile chips.

Re: Satellite L300 - Issues after Windows 7 installation

Hi,
I have a Toshiba Satellite L300 bought with Windows Vista 32bit approximately 4 months later I got out my Windows 7 64bit made it.
1st My laptop has problems start after I installed drivers give it extra drivers to go but I've downloaded drivers for Windows 7 64bit
2nd Whom do I hear music and wants to hear next song is it whom I use but ne net If the keyboards fn +?? do not go and play / pause next prevous Stop and media player tase funtionieren not only the silent weis tase of modest
P.s. translate with google
Thanks in advance
Patrick

Hi Patrick,
To be honest your posting is very hard to understand and I dont know what you mean exactly.
According your posting it seems that you need some driver and you can get all drivers here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Regarding the FN keys you need Toshiba Value Added Package and Flash Cards Support Utility. Everything can be downloaded from official Toshiba page.

Satellite M40-133: startup issue after shutdown

When shutting down my Satellite M40-133 EN if I start it up again all I get is the Toshiba wellcome screen.
If it is left for some time it will startup as normal. When running it is quite warm.
Please help.

For me it sounds like an issue related to the overheating.
It seems the notebook cannot start and boot properly due to a high internal temperature.
The main reason why a overheating issue happens is very simply.
The cooling modules dont work correctly. I think the dust and debris prevent the cooling fans from running with full performance.
A simply fan cleaning should help you.
From time to time I clean my ventilators too. I use a compressed air spray. Such sprays are very useful to get rid of dust and most computer/notebook dealers offer such sprays.
If it will not improve the situation then a notebook technician should disassemble the notebook and should clean it properly. Additionally he should renew the thermal grease which is placed between the CPU and cooling module, too.
Good luck

Satellite L300D - Won't load after BIOS update

I had to update my bios & it seems that the wrong one was downloaded about 3% into installing the laptop just died & won't go back on.
There are no lights & there is no noise from the laptop at all.
Any ideas on how I can fix this?
The laptop is a Toshiba satelite L300D

Hello
Well, if BIOS update crashed you can do nothing because the ROM module must be reflashed. This can only be done with special tools and only an authorized service provider has such tools.
So please contact nearest Toshiba service and ask for help :)

CRM 5.0 - Middleware issues after Support Package installation

Hi experts,
after upgrading the support package (from version 11 to version 17) we are facing a lot of issues.
1. We need to synchronize custom tables from CRM to R/3.
Can you give me an example on how to configure table SMOFQFIND/CRMMAPTAB for inbound queues CRI*?
We know we have to do but we don't know how.
2. We need to synchronize standard tables from R/3 to CRM.
Do you know we have to do some new configuration in SMOFQFIND/CRMMAPTAB table?
With the older version of SP we were'nt asked to configure those tables.
It has worked up to now
Thank you in advance
Emanuele

Hi,
We have the exact the same issue her using the 0DAT variable to restrict to the system date (in the filter process of the APD).
Did anyone resolve this issue?
Thanks,
Fabian

Satellite P35-S6112 - No sound after Windows 7 installation

I installed Windows 7 on this Satellite P35-S6112 with a Realtek AC97 sound card in it. The card and drivers are working but there is no volume. I can hear sound with a headset very faint. I have uninstalled, reinstalled, attempted update but I have the current drivers installed.
Troubleshooting has been done and system reports no issues. I am in desparate need of help here as my daughter needs this for her college as her other notebook is in the shop. Any help is greatly appreciated!!

I have checked US support page and this old notebook is not supported for WIN7 so Im glad to hear you have installed Win7 successfully.
If the sound card driver is installed properly I dont understand what do you mean with there is no volume. Can you use speakers symbol in task bar and change speakers sound level?
Click also on speakers symbol and open Playback devices. Can you set Speakers to be default device?
Which OS have you used before Win7 installation? Have you noticed the same problem?

Satellite P100-257 - No sound after Win 7 installation

Need help...
I have Satellite P100-257, upgraded from XP to WIN 7. Now my sound device don't work.
I installed driver, but still nothing. In device properties says: device not installed.
However, when I run diagnostic, says that driver has problems and that problem will be fixed after reinstalling driver.
So, it keeps me in the loop all the time.
Tried download some drivers from net, even buy Toshiba Recovery Disk for my model (payed 15$ !!!! for gad's sake!!!!)...
Now, my knowledge here is limited, so any tips, suggestions, solutions are more than welcome!
Thanks!

Thanks m8!
Acctually, after 2 days cracking my head about it, I was this close to buying new machine :)
But, solution was acctually more simple than I thought...And felt so stupid after I finally figured it. Well, Win 7 is more similar to XP than it is to Vista, so I just run simple chec for XP sound drivers on Toshiba download support web site, and it came with one driver for this specific model: *sound-20071106151533.zip* driver. Just needed to check in driver properties for compatibility (XP service pack 3 mode) and simple install...That was it... Run smoothly on WIn 7.
Sometimes, only solution is the simplyest one :)
Thanks anyway!

Satellite A350D - WLAN card disappeared after Windows 7 installation

Hi folks.
This is my first post on this forum, and it's not for a good reason.
I have installed a brand new copy of Windows 7 32 bit, and after installing it, i have gone to Toshiba website and download the drivers for this version of SO. Everything looks great, except that the wireless LAN card drive don't works now. On the device manager nothing appears available. I don't have any error on Windows System Information.
What is the problem? The wireless switch is on!! FN + F8 don't work. Help me!!
[*Device Manager:*|http://img295.imageshack.us/img295/4649/systeminformation.jpg]
[*System Information:*|http://img218.imageshack.us/img218/6196/devicemanager.jpg]

Hi,
Have you installed the Wlan driver?
http://aps2.toshiba-tro.de/wlan/?page=downloads
Download and install the driver for your model, while installing the driver enable the Wlan switch (if available) or pressing FN+F8

Satellite P100-429 - No sound after Windows 7 installation

I have a Satellite P100-429 Purchased Nov 2006.
I have just upgraded from XP to Windows 7 and Office Pro Plus. All works well but there is no sound if I try to play a CD. I have done usual checks for Mute etc. but no Joy. In device manager a yellow triangle with exclamation mark within is against my sound device. C
an I download a new driver to solve problem or is it more complicated than that? Than you

Hello
For me it sounds like that you didnt install the sound driver for sound card
According the Toshiba website there is no 64bit sound driver available for Satellite P100 but I noticed that Satellite P300 supports Windows 7 64bit and has Conexant sound card too. Maybe this driver is working for you too.
Just search for Satellite P300 drivers and test the sound driver It should work! :)

Satellite Pro U200 - No sound after Windows 7 installation

Hi,
I'm having a problem with the sound after installing Windows 7 on a Satelite Pro U200 (PLUA1E). No Win7 sound driver found on the Nordic driver website. Please help.
G.Magnason

Hi buddy,
Have you already checked the Toshiba website itself?
http://eu.computers.toshiba-europe.com
I found a sound driver for Vista 32bit and the most Vista drivers also work on Windows 7 so its worth a try!!! :)

Responsibility screen language issues after an ADI installation

hello,
after installing ADI on some workstations,
we see '??????????' instead of the local language in the responsibility screen when connecting to ADI.
can anyone help?
Thnak you

Hi,
Set NLS_LANG in the registry to the correct value and check then.
Thanks,
Hussein

Satellite L300D-12U - Two issues after Ubuntu Linux installation

Similar Messages

Maybe you are looking for