SC creation - Default Settings - Account Assignment

Hi, on SRM 7.0, users would like to use the function: Default Settings-->Set Values , but the "Account Assignment" tab doesn't contain values and adding a line causes a short dump.
After applying some notes:
0001450367
0001441428
0001440676
0001428534
0001420622
0001393294
0001389708
0001379914
0001373880
0001372516
0001366012
0001365271
0001342965
0001304517
dump is no more generated but inserted values disappears and scrolling lines is not possible...
Any idea?
Thanks in advance
Simona

Hello Simona,
I worked in a similar issue and notes below solved it.
1319705
1341881
Perhaps it is helpful for you.
Kind regards,
Ricardo

Similar Messages

  • How to default an account assignment in a STO?

    Hello,
    We have a customised account assignment type "Z"
    We would like this type to be defaulted in STO's for some receiving Plants only.
    Do you know if this is feasible to force the system to trigger this account assignement for a defined list of plants?
    Thanks a lot in advance

    It is not possible to define default Acct Assgmt cat for particular plants in STO. Instead you can make it default at client level (irrespective of doc type) for particular users.
    For doing so you need to just maintain user parameter KNT with value equal to your Acct Assigmt cat. You can maintain user parameter in SU01/SU3. This means whenever this particular user run the transaction which includes act. assigmt cat will have default act assigmt cat.
    Hope it might help you somewhat.
    Cheers,
    Parag Mahajan

  • Language Key Default for Account Assignment Search

    Hi,
    We are on SRM 4.0, Extended Classic.  We are rolling out our implnetation from Uk to Italy, therefore have installed Italian Language Pack etc.
    UoM/ Currency etc has been automatically translated .  Our English description for Product Categories will be copied straight over for Italian usage without manual translation. 
    However, when using the 'Find Account Assignment Data' search help.  Language Key 'IT' is defaulted and no entries are found from R3. 
    I want to know if this can either be defaulted to 'EN', even though the user has logged in with 'IT'.
    'EN' would then bring back a complete list of Cost objects from R3.  I dont want to undertake a translation for each bk-end Cost Center/WBS etc to 'IT'.  Or does anyone know of another way to solve this issue?
    Thanks

    Hi,
    Please check RFC (Dialog) in Define Backend System customizing, then chek logon user and language in SM59.
    Regards,
    Masa

  • PO Creation with accrual account assignment

    We have a scenario with Insurances and Software Licences fee, since the amount is quite high, the actual quaterly fee is
    accrued every month to smoothen the effect in the books.
    When we create PO, is it possible to assigin accrual account (instead of the usual expense code) in the account assignment column? So that, during the Goods receipt the accrual account will be reversed. This accrual account would be a balance open item managed account.
    We developed the scenario through finance using a recurring entry document that automatically posts the desired values every month, but we need to make it through MM since the original invoice for the insurance or for the software must be entered through a Purchase Order.
    Thanks in advance
    Edited by: E.Barreda on Sep 7, 2009 11:24 PM

    Hi,
    Even if u make mandatory the io number in PO.
    You cannot settle the asssts to that IO and budget control also not possible.
    Thanks

  • SRM - creation of new account assignment

    Hello,
    I just created a new account assignment that combines an asset and a cost center.
    My client wants to be able to purchase products as a asset and use the cost center to the workflow approval of the shopping cart.
    The customizing I did in MM was:
    The same customizing was done for item category O, G and P.
    The customizing I did in SRM was:
    I also added the attribute Asset/Cost center in account assignment in PPOMA for my user.
    Two questions:
    1 - When using this new account assignment, the button to create a new asset is not showing. Is it only possible to create new assets if you choose account assignment asset?
    2 - When using this new account assignment, no documents were created(purchase order). I got the error message Process schema not found.
    Did I miss any step in the customizing?
    Do I need to do something else when creating a new account assignment?
    Thanks in advance!
    Best regards,
    Karin

    Hi Karin,
    Did you do the following set up / security role assignment Assigning to Assets - Account Assignment - SAP Library as mentioned in the above link.
    Please do the same you should able to see Create Asset button.
    Thank you
    Ritesh

  • Purchase order creation - Account assignment group C (Sales Order)

    Hello Gurus
      During the purchase order creation in Me21N, account assignment category C (sales order) is available. In which scenario we will use it. When I assign C system is asking for a GL account. Why system needs a GL account, and how the posting will be at the time of goods receipt. Thanks for your help in advance.

    Hi,
    Creation of Purchase Order with t.code: ME21N  with account assignment category C (sales order) is used for Time and Material Expenses with third party scenario and you need to enter sales order number and respective G/L account . In this scenario 1st a  sales order is created with a material( material created DIEN material type) & then purchase order created with respect to sales order.
    Here you provide service to your customer and this service you procure from your vendor, you just play middle role  for providing and getting service.Standard DIEN material type designed for Sales usage only, so you create sales order  for service material.Service master is used to get service from vendor with item category D with proper account assignment category as C
    Example:
    Material type DIEN is used for when you offer "SERVICE" to your customer.( The steps are (VA01,VF01,VF04,F-28), If u used HR module( you can used with sales order with t.codes are: CAT2,CATS_APPR_LITE,CAT7,PR05,PRRW,PRFI)
    Service Master records(AC01)ESM is used when you procure "SERVICE" from your vendor.( Steps are: ME21N with Item Cat. "D" with Acc. ***. Cat. "C", ML81N,MIRO & F-53).
    Regards,
    Biju K

  • During creation of WBS element How to pass ACCount Assignment field as blnk

    Hi Experts,
    I am  creating of WBS element by using BAPI   ''BAPI_BUS2054_CREATE_MULTI'' .
    during creation, passed the ACCount Assignment field  as blank.
    but when i check that WBS in CJ20n that ACCount Assignment field in coming as checked.    Please suggest me how to pass this field as blank.
    Thanks
    Susant
    Edited by: Susanta22 on May 9, 2011 6:08 PM

    I have same issue. how you resolved it.

  • PO: Default Account assignment category per material?

    Hello,
    The requierement of my company is that some materials are purchased for stock and some others for Cost center. But at some point they want to move some of the materials of "cost center" into "stock". So materials will be  "looking" the same in questions of views created, etc.
    So it would be good if there is a way to default the account assignement category by material. Any idea? User-exit?...any possibility totally standard of doing this (withouth enhancemnet/user-exit)?
    Release 4.6c

    Hi,
    It can be done by having two doc. types in the PO one for the stock and the other one for the consumption.No need for the two material types.
    In doc type xy -account assignment is disabled, in the other doc type XZ the account assignment is enabled.
    Also using the user exit ME_PROCESS_CUST, you can define the condition against the doc type.
    Regards,
    velu

  • SRM 7.0 Account assignment adding new field Profit_ctr

    Hello All
    I am hoping that someone has done this in SRM 7.0 and can help me out.
    I have added PROFIT_CTR field to Account Assignment tab for SC.
    We have already followed the instructions in OSS note 1082243 and added PROFIT_CTR field to the 2 tables BBP_C_ACCF and BBP_C_ACCFD. The field is available in configuration for creating a new account assignment category using PROFIT_CTR field.
    In WDC, implicit enhancement was created and layout changed to make the field available in the view. The field already exists in the context so no other development was done.
    The PROFIT_CTR field is now available in Assignment tab for input SC is created.
    Also, configuration is done in PPOMA to default u201CProfit Centeru201D as the account assignment category.
    The problem is that during the SC creation , in the Account Assignment line, field  u201CAssign Numberu201D is still pointing at GL account (it is defaulted to GL Account) and not Profit Center value.  I would have expected u201CAssign Numberu201D field to contain profit center value and not GL Account.
    What further changes are needed?
    Looking forward to any suggestions..
    Thank you

    Hi Raj,
    Here is the documentation on how we did this when we were in 7.01.
    Version 20.0 - :
        The new requirement needs Profit center as one of the Account assignment category.
                      In order to get the profit center an implicit enhancement is required as SAP suggested.
                                        Please see SAP’s response at the bottom of this version.
    Enable Profit Center Field:
          1.) Enhance the class /SAPSRM/CL_PDO_ACCT_ASSGT_HLPR by creating a new post-exit for method GET_ACCCAT_TECHFIELDS.
       2.) Within the post-exit modify the field (ACC_FIELD) with new value
    ‘PROFIT_CTR’ of internal table ET_ACCCAT_TECHFIELD where ACC_CAT = ‘PR’.
          3.) This enables Profit center as one of the Account assignment Category.
    Version 22.0 - :
    Enable Profit Center F4 in UI:
    4.)  Enhance view V_DO_ACCOUNTING of component /SAPSRM/WDC_UI_DO_ACC.
    5.) Create a post-exit for method WDDOINIT of view V_DO_ACCOUNTING.
                                        6.) Within the post-exit set the value help to Application Defined. See below code.
                                                    CALL METHOD lo_nd_info->set_attribute_value_help
    EXPORTING
    name = 'PROFIT_CTR' " ContextAttribute Name                                 
    value_help_mode = '141' " value help mode–Application Defined.
    value_help = 'USAGE_SH_F4'. " Search help component usage.
       This enables the F4 input help for field Profit Center. Since it’s a search help in ECC and wanted to be displayed in SRM, additional development is required to bring in the F4 Popup screen.
    Enable Profit Center F4 Pop-up Screen:
    7.) Enhance the component controller of component /SAPSRM/WDC_UI_BACKEND_SH.
    8.) Create a post-exit for method SET_BAPI_PARAMETER of the component controller.
    9.) Within the post-exit set the Business objects parameters as follow
    DATA ls_bapi_parameter TYPE if_componentcontroller=>element_bapi_parameter.
    DATA lr_node           TYPE REF TO if_wd_context_node.
    lr_node = wd_context->get_child_node( 'BAPI_PARAMETER' ).
    IF iv_field EQ 'PROFIT_CTR'.                                       
    ls_bapi_parameter-objtype   = 'BUS0015'.
    ls_bapi_parameter-objname   = 'BUS0015'.
    ls_bapi_parameter-param     = 'PROFITCENTER'.
    ls_bapi_parameter-method    = 'GETLIST'.
    ls_bapi_parameter-field     = 'PROFITCENTER'.
    ls_bapi_parameter-shlpname  = 'PRCTR_EMPTY'.
    ls_bapi_parameter-shlpparam = 'PRCTR'.
    ls_bapi_parameter-FIELD_DESC = 'TXT50'.
    ENDIF.
    IF ls_bapi_parameter IS NOT INITIAL.
    lr_node->bind_structure( new_item = ls_bapi_parameter ).
    ENDIF.
    Setting these values enables the F4 Popup screen.
    Move Selected Value from Pop-up to profit center field in screen.
    10.) Once value is selected from the pop-up it should be moved to the
    profit center screen field.
    11.) In order to do that read the context Node ‘SELECTION’. This node contains
    the selected value.
    12.) Now move the selected value to the profit center field in context node
           ‘COMP_CONTEXT.’     
      lr_node = wd_context->get_child_node( 'SELECTION' ).
    lr_node->get_static_attributes( IMPORTING static_attributes = ls_selection ).
    lr_node = wd_context->get_child_node( 'COMP_CONTEXT' ).
    lr_node = lr_node->get_child_node( ls_selection-node_name ).
    lr_node->get_static_attributes( EXPORTING index = ls_selection-index
    IMPORTING static_attributes = ls_content ).
    Version 23.0 - :
            1.) Need to raise a warning message in Shopping cart whenever the profit center is
    Set to “PCDUMMY”.
    2.) Edit BAdI Implementation ZCL_IM__SRM_SEI_ITEM_CHECK. Add the warning message in method IF_EX_BBP_ITEM_CHECK_BADI~BBP_ITEM_CHECK by appending a new line with error message to export table ET_MESSAGES.
    Version 23.0 -
      1.) Create a customer field called ZPR_DESCRIPTION for accommodating profit center description. This is done by appending the field to structure INCL_EEW_PD_ACC_CSF.
    2.)  Create a RFC in ECC which would read table CEPCT to read profit center text. This Function module is called Z_FI_GET_PROFIT_CENTER_TEXT.
            SELECT SINGLE MCTXT FROM cepct
    INTO EV_PROFIT_CTR_TEXT WHERE spras = sy-langu
    AND   prctr = IV_profit_ctr
    AND   datbi >= sy-datum
    AND   kokrs = IV_controlling_area.
    IF sy-subrc NE 0.
    RAISE PROFIT_CTR_NOT_FOUND.
    ENDIF.
    3.) Within BAdI  ZCL_IM__SRM_DOC_CHANGE_BAD call the function module
          Z_FI_GET_PROFIT_CENTER_TEXT. Read profit center text and fill the
    Customer field ZPR_DESCRIPTION.
    SAP's Response for when I raised a message about profit center.  This is what helped us to start.
    Dear Customer,
    In the account overview screen, for custom account assignment
    categories, the GL account field would be shown in the 'Assigned to'
    column by default. However, if you go to the account assignment detail,
    you are able to use the search help for the profit_ctr field.
    As the fields are binded dynamically, only through a modification you
    would populate profit_ctr automatically.
    From the SRM 6.0 release onwards, the account assignment overview screenwas changed such that for the custom account leading fields, always the
    GL account would be shown. This was changed because, earlier when the
    leading field was a customer field, it was not possible to show the
    account description in the overview screen and it remained empty. This
    was creating confusion for the users.
    For the new releases, it was decided that when the leading field is a
    customer field, the GL account and its description would be shown in theoverview screen. The coding for the same has been implemented in the
    method /SAPSRM/IF_PDO_ACCT_ASSGT_HLPR~GET_ACCCAT_TECHFIELDS(class
    /SAPSRM/CL_PDO_ACCT_ASSGT_HLPR).
    WHEN OTHERS.
    ls_accf-acc_field =
    /sapsrm/if_pdo_action_c=>gc_acc_obj_gl_account.
    ls_acc_cat_techfield-desc_field =
    /sapsrm/if_pdo_action_c=>gc_acc_cat_gl_desc.
    ENDCASE.

  • Account assignment grp as per material type

    Hello,
    Is anyone of you aware of the settings where I can bring the default material account assignment group as per the Material type in material master.
    I think it is not possible by configuration so kindly provide the user exits if any.
    Thanks!!!
    Regards
    Karan

    Hi
    Have you thought of using Transaction variant through transaction code SHD0,
    which is your materrial type is it SAP standard?
    you create a transaction variant with your value of acc *** group and you can make it as default.
    you can also use for e.g MMR1 for raw material , MMH1 for tranding and so on and change this , but this will only be in case of sap standard material type.
    Regards
    Jitesh

  • Account Assignment in an automatic PO created from a goods receipt idoc

    Hi guys,
    I'm doing a goods receipt via the IDOC MBGMCR that is automatically creating a PO.  Is there a way to make the item on that PO using the account assignement "K" (Cost Center) ?
    In the BAPI for the goods movement, they are calling the function module "ME_CREATE_PO_ITEM" to create/prepare the item.  In that called, they defaulted the account assignement to space!!! I don't know how I can overwrite it.  Is it possible via configuration ??
    Many thanks,
    Stéphane

    Hi Stephen,
    Did you find an answer to your query, i have the same question i want to default the account assignment 'K' for each item for a particular stock transport order.
    I'm wondering if it can be configured or do i need to have ABAP do it.
    your reply is greatly appreciated,
    Thanks,
    Michelle

  • Addl Account assignment in Sales order

    We are in Make-to_order Scenario.
    Following is an item which as generated from a SD invoice:
    marketing and management Free : 1300
    In the additional account assignment data, sales order = 1500989
    Cost centre & Internal order fields are blank.
    Can I assign a default Cost centre for this GL account through OKB9 ?  Will it work ?

    Hi Nikki
    Cost center does not work for revenue accounts...  You can assign IO in the additional acct assignments tab
    However, by default the account assignment is to PSG if you have COPA activated
    br, Ajay M

  • Automatic multiple account assignment

    Hi expert,
    Is it possible to put by default the account assignment in my PO?
    In my case, i have to put a multiple account assignment for one G/L account.
    Is it possible to do that in standard? and how to do it?
    Thanks in advance,
    Chris

    If you have multiple assignment you can't have valued receipt, but if i disable the flag i have no message.
    When you are having the multiple account assignment, then the system will force you to have GR-non valuated indicator being flagged which results in the fact there is not any FI document at GR posting stage and this is theAP standard feature of S.

  • Item Field Appearing In Account Assignment Field

    Hello
    I have added the customer specific field at the item level of the shopping cart and added the code in BBP_DOC_CHANGE_BADI. When I activate teh BADI this field also appears in Account assignment fields which shudnt appear and when i deactivate the badi it doesnt appear in account assignment fields. Was there something wrong in the badi implementation. Please help.
    Thanks
    Viky

    Hi
    As I told you earlier, Please refer to the SAP OSS note - 672960.
    <u>Here are the details -></u>
    <b><u>Account assignment fields</u></b>
    For the account assignment fields, use the INCL_EEW_PD_ACC_CSF structure. The account assignment fields are independent of the document type. To display the fields on the account assignment detail screen, you must carry out the following steps:
    1. Use Transaction SE16 to include the user-defined fields that were defined in structure INCL_EEW_PD_ACC_CSF in table BBP_C_ACC_F.
    2. Include the fields and the texts for the account assignment fields from INCL_EEW_PD_ACC_CSF in table BBP_C_ACCFD (according to point 1).
    3. In the IMG activity ' Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Account Assignment -> Define Account Assignment Categories', you can now add user-defined fields to existing account assignment categories.
    <b>Alternatively, you can use BBP_CUF_BADI_2 to hide all the unnecessary fields from Display in the Shopping cart.</b>
    Hope this will help.
    Regards
    - Atul

  • Account assignment group in Invoice.

    Hi,
    In standard settings, account assignment group of customer is flown from Payer function. But my requirement is to get account assignment group in invoice from ship to party.
    Please suggest what are the customization required for above.
    Thanks,
    Anup.

    You will have to use a routine at the time of billing/account posting . You can create a Ztable (copy of the standard account assignement) and in the Account assignment Group of customer, which contains values from the payer , maintain the Account assignement group  indicataor( value) from the ship to party.
    During account posting , at runtime....using the above routine (requirement) replace the value of the Account Assignemnet group from the standard table with the value from the Ztable ( which contains the Account Assignment Category from Ship to Party).  This will take care for all the customers for whom you want to determine  account assignment group from Ship to party and for remaining customers, the system will behave in the standard way.
    Regards,
    Ashok

Maybe you are looking for