Scan ip not working in 11.2.0.1 RAC

Hi,
I have set up 11gR2 (11.2.0.1) in OEL 5.My scan ip is not working properly.Here i have shown the output of the some commands on node1 and node2.Can anyone let me know how to rectify this issue.
[oracle@markdb bin]$ nslookup db1-scan.oracle.com
Server:         192.168.32.142
Address:        192.168.32.142#53
Name:   db1-scan.oracle.com
Address: 192.168.32.155   ---------------> ip order changes
Name:   db1-scan.oracle.com
Address: 192.168.32.153
Name:   db1-scan.oracle.com
Address: 192.168.32.154
[oracle@markdb bin]$
[oracle@markdb bin]$
[oracle@markdb bin]$ nslookup db1-scan.oracle.com
Server:         192.168.32.142
Address:        192.168.32.142#53
Name:   db1-scan.oracle.com
Address: 192.168.32.153
Name:   db1-scan.oracle.com
Address: 192.168.32.154
Name:   db1-scan.oracle.com
Address: 192.168.32.155 -----------------> ip order changes
Node1
[oracle@markdb bin]$ ./srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node lukedb -------------------> Node 2 name
[oracle@markdb bin]$
[oracle@markdb bin]$
Node2
[oracle@lukedb bin]$ ./srvctl status scan
SCAN VIP scan1 is enabled
SCAN VIP scan1 is running on node lukedb --------------------> Node 2 name
[oracle@lukedb bin]$
[oracle@lukedb bin]$
[oracle@lukedb bin]$
Node1
[oracle@markdb bin]$ ./srvctl config scan
SCAN name: db1-scan.oracle.com, Network: 1/192.168.32.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /db1-scan.oracle.com/192.168.32.153
Regards,
007

What is the issue? "SCAN not working" say nothing to me.

Similar Messages

My Biometric Scan is not working

mine is HP ProBook 4445s Notebook PC with windows 8 and my biometric scan is not working every time i open it, it says device not found and on my laptop finger scaner is provided

does any body knows about it

MY PRINTER SCANER IS NOT WORKING

MY PRINTER SCANER IS NOT WORKING
WHAT CAN I DO

Hello laharpur,
Welcome to the HP Support Forums!
I would like to help with your All-in-One not working, could you reply with the model of printer and the Operating System installed on your computer Windows or Mac?
I will keep an eye out for your reply.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Wireless scanning does not work with Yosemite

When I uppgraded from Mavericks to Yosemite the wireless scanning doesn't work anymore.Tried to find some new driver at the support page, but there are only drivers for Maveriks and erlier versions of OS X.

Hi , Welcome to the HP Forums! I noticed that wireless scanning is not working after upgrading to Mac OS X 10.10, with your HP Deskjet 3520 printer. I am happy to help! Some questions for you: Is your HP Deskjet printer an all-in-one? Meaning, can it print, scan and copy?What is your printer's Product/Model Number? To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As their are multiple types HP Deskjet 3520 printers.Are you able to make a copy with the printer from the scanner glass? In the meantime, please see this how to scan guide, Scanning in OS X v10.10 Yosemite without HP Software, for some alternative scanning methods, and let me know if any of these options work! Thank you for posting, and hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Scanning is not working I unable to scan

Dear Sir
My scanning is not working I am unable to scan my printer name is HP Deskjet F4488
Kindly helpt me to resolve this issue at the earliest. What steps I need to take or follow
Anticipating your best co-opeartion
Thanks & Regards
Dinesh Poojary

Hello @kukuduku,
Welcome to HP Forums!
I understand you're unable to scan a document using the Deskjet F4488. I will do my best to assist you! First, I need to find out your operating system on your computer? Windows or Mac?
How is this printer connected? Ethernet (Wired) or USB?
Are you receiving an error message when you scan a document? Please verify this information and I will assist you further. Have a great day!
I worked on behalf of HP.

HP Deskjet 2540 scan does not work with windows 10

my HP Deskjet 2540 scan does not work with windows 10, however, it still does eprinting. i need the solution and i haven't got it.

OK, More information. Installed Media Portal 1. This works with the tuner card without additional modification, so this appears to be some kind of issue with the software. Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

HP Officejet 150 mobile, HP scan does not work (Can not find scanner)

Hi,
I just bought a HP Officejet 150 Mobile All-in-One. I installed the complete software package (downloaded from HP Site) with bluetooth on a windows 7 Acer Aspire S5 laptop. Printing seems to work fine, but when starting HP Scan, i get the following error message:
Saing that the software can not find the scanner with suggestions to solve it.
Is it possible to scan with a buetooth connection? Any other suggestions what is going wrong?
Best regards,
Roelof Crevecoeur
This question was solved.
View Solution.

Hello Roelof Crevecoeur,
Scanning is not supported through a Bluetooth connection, only printing is available for such connectivity, You will need a USB in order to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137985&tmp_task=setupCategory&cc=us&dlc=en&lc...
NOTEcan functions are not available through a Bluetooth connection. Scan functions are supported only through a USB connection.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Scanned Images not working with iphoto6

All my hundreds and hundreds of scanned photos will not work in iPhoto6. My digital photos taken with a digital camera work just fine.
I use an Epson 2480 Photo scanner. All the photos I have scanned over the years and even my recent scanned photos will not work in iPhoto6. Some are psd, some are tiff and some are jpg. When imported and the Ken Burns effect is applied, they immediately have a red/orange overcast. They seem to be Ok as long as the ken burns effect is not applied.
I have updated all the way on iMovie updates.
So, if I scan a photo and import it into iMovie6 and try to apply a ken burns effect, it immediately applies a red/orange overcast. sort of like an orange translucent covering.
anybody help me with this, please?

Yes, I use Photoshop CS. I normally scan my photos for printing. Save them in .psd. (which averages about 25 photos per customer) They are all saved in RGB mode. I copy them and convert those into CMYK mode for printing.
I then use the RGB photos to build an Imovie for my printing customers.
I take the same photos and use them to build a quick complementary family DVD.
BUT, now I have to re-open the files in photoshopCS and save them as a
jpg file, in order for them to work in iPhoto6. This procedure also works with preview.
However my digital camera photos work just fine. No need to resave them.
But...... I have hundreds of old photos I have scanned over the years that have to be reopened and RESAVED as a jpg in order for them to work in Iphoto6.
I mean HUNDREDS OF PHOTOS.
I guess, resaving them somehow strips them of their old scanning info tags????? but my goodness, that will be very time consuming. I dont know if I can wait for a bug fix from apple. Who knows if they will ever fix it?
Thanks again.

Lexmark Genesis s815 scaner is not working on mac mini

Hello everybody. Please help if you can!
I recently bought my mac mini and migrated my files and all the data from my previous mac mini, some of the files are comming originally from my old powerbook. I wrote this introduction just because people from lexmark geeek customer support said that this migration and upgrades from Snow Leopard could be an actual and essential problem.
Now the issue.
I have this new stanning lexmark genesis s815 multifunctional (printer, fax, scanner) device. The scanner does not work. I have updated the driver, the frimware (all available on Lexmark supprot page), downloaded separate scan center application, but nothing works. All the possible ways to scan (from printer utility on the system preferences, from image capture, from the lexmark genesis itself, and from the scan centre application) are not working. The only thing I can do is to scan on email and then download it to my computer.
The scan centre does not open at all
The image capture comes up withthe device appearing in its left column, but clicking on the device leads to nowhere.
Opening scanner from printer utility in the system preferences comes up with error 9931
Scanning from the device itself gives me communication error on both wifi and usb modes
Please help if you can

Hello everybody. Please help if you can!
I recently bought my mac mini and migrated my files and all the data from my previous mac mini, some of the files are comming originally from my old powerbook. I wrote this introduction just because people from lexmark geeek customer support said that this migration and upgrades from Snow Leopard could be an actual and essential problem.
Now the issue.
I have this new stanning lexmark genesis s815 multifunctional (printer, fax, scanner) device. The scanner does not work. I have updated the driver, the frimware (all available on Lexmark supprot page), downloaded separate scan center application, but nothing works. All the possible ways to scan (from printer utility on the system preferences, from image capture, from the lexmark genesis itself, and from the scan centre application) are not working. The only thing I can do is to scan on email and then download it to my computer.
The scan centre does not open at all
The image capture comes up withthe device appearing in its left column, but clicking on the device leads to nowhere.
Opening scanner from printer utility in the system preferences comes up with error 9931
Scanning from the device itself gives me communication error on both wifi and usb modes
Please help if you can

Canon IJ Network Scanning Utility not working

Hello,
Since I upgraded my OS to Yosemite, the application "Canon IJ Network Scan Utility.app" is not working anymore.
When I try to launch it, it first shows in the top menu bar and then disappears. It is located in Macintosh HD ▸ Library ▸ Printers ▸ Canon ▸ BJPrinter ▸ Utilities.
I cannot use my scanner from the scanner itself any more which is not so convenient when you have a stack of document to scan...
B.
Tech. details:
Yosemite version 10.10.1
iMac (24-inch Mid 2007)
Processor: 2.8 GHz Intel Core 2 Duo
Memory: 4 GB 667 MHz DDR2 SDRAM
Graphics: ATI Radeon HD 2600 Pro 256 MB

I have noticed the same issue you are talking about. I have found a workaround to trigger scans from the printer, but it is MUCH less convenient than it was in Mavericks.
If you install all the latest Yosemite versions of Canon drivers and utilities from canon support site, you should have something called "Canon IJ Network Scanner Selector EX". If you run this, your printer should show as one of the options to select. Select it. There should also be a button labeled: "Scan-from-operation-panel-settings". Click that, and select your printer. If it is already selected, you may have to unselect and then re-select. At the printer, you should then see your mac in the "PC" destination selector.
With Mavericks, I only had to set this up once, and I could then ALWAYS just go right to the printer to initiate scans. That is, it STAYED connected to my computer: as long as the computer was on, I could just go straight to the printer to start scanning. Now, it seems that the connection somehow gets broken, or the "listener program" on the Mac stops, or something, and you have to go through the above steps again to get it re-connected. It is quite annoying, and much less convenient than it was with Mavericks. I think in my case, it gets "disconnected" every time my computer goes to sleep.
Hope that helps. If you find a way to keep it connected all the time, I'd appreciate it!

Officejet 6830 wireless scan does not work

Wireless scan to computer file does not work ever. Scan starts and then computer losses connection to scanner before scan can send file to computer. Happens both when scan is started from computer and when scan is started from scanner. After that, browser interface reports scanning is disabled. This sometimes causes entire device to fail to respond to anything, including power switch, must be disconnected to power and reconnected to wake up. HP Print and Scan Doctor gets the same failure and cannot fix the problem. Document printing works. I have had this failure on two different scanners. I thought there was a manufacturing defect so I returned first and received another. Same exact problem.

Hi,
Thank you for your reply.
For that you will have to contact your network administrator, ask them to grant you access to use the resources on the local network when you are connected to the VPN. So that you can use the printer, when you are connected to the VPN.
As I Said earlier, when you are connected to the VPN you completely on a different network (Office Network) and you are disconnected from your local network. Your local network will just be acting as a bridge.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

OfficeJet 8600 Pro Premium scan does not work since upgrading Mac to 10.10.1 (Yosemite)

Since updating my MacBook Pro to Yosemite, I cannot get the scan to computer function to work. I have downloaded the softwear again & reinstalled; reset the printer, repaired disk permissions, etc. to no avail. Also i note that the HP utility icon no longer appears. Printing and copying work fine. Any suggestions?
This question was solved.
View Solution.

HI Gregg,
Thanks for posting your issue on forum,
Could you let us know how is the printer connected to the Mac. Also would like to know if you are using Scan to computer or Scan to network folder.
did you try uninstalling and reinstalling the printer after upgrade.
When you upgraded you Mac to Yosemite did you use the Migration Assistance to move all the applications, files to the newer OS.
check if you have the HP Scan application installed if yes let us know the version of it.
Try the below steps:
Go to Finder>>Applications>>Hewlett Packard folder and run the HP Uninstaller.
go to System Preferences>>Printers and Scanners>> right click on the printer icon or the white space on the left side of the windows and click on Reset Printing System( Note: This will delete all the printers listed under printers and scanners)
Restart your Mac,
go to Apple Menu>>System Preferences>>Sharing and make sure computer name is present.
Download the latest driver from web, make sure you select the correct product and install the same.
When adding the printer make sure you select HP Printer driver instead of AirPrint.
Perform Apple Software Update and make sure its uptodate.
also you can install the HP Printer Driver Version3.0
Now see if you can find HP Utility and then enable Scan to Computer.
Let us know if this helps.
Thanks.
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "Kudos! Star" which is on the left
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue

FRUSTRATED!!! HP 6700 Scanning feature not working with my MAC

I just bought the HP Officejet 6700 at COSTCO primarily for its claimed scanning capabilities. The first frustrating warning was that the CD included with the device was not accepted by my IMac. So, I after a half hour of downloading time, I finally was able to set up the printing and Fax capabilities, but NOT the Scanning. The scanner software is evidently there, but it will not recognize the printer/"scanner" even when I click the browse button.
Before I send it back to COSTCO, I just want to make sure that I'm not missing something here.
And, is there anyway to call HP for live support?

Hi realworld,
I have spend the afternoon trying to re-create the issue you are experiencing with no luck. I have downloaded and installed the HP Officejet 6700 e-All-in-One Printer series Full Feature Software and Driver - OS X 10.9 Mavericks...dated 2013-11-15 and it works. I used both the Officejet driver and the Airprint driver, both worked, I am able to scan.
The issue you are experiencing is not the software it seems to be related to the computer or how it may have installed onto your computer. It could even be a firewall. Do you have a USB cable you can connect to see if you can scan with the cable to eliminate weather the issue is stemming from the network or not?
Here are some steps you can try, I have seen great success with these steps being completed in order.
Scrub (Removes all HP software)
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
Hold down Control, Option and Command
While holding the three buttons down, Click uninstall
Reset Printing System
Click the Apple icon, and then click System Preferences .
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password .
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions (I know many of you have done this but because we have now done a scrub it is good measure to ensure non of your permissions differ)
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer .
Restart the computer
Click on HP Officejet 6700 e-All-in-One Printer series Full Feature Software and Driver - OS X 10.9 Mavericks to download and then install the necessary software for mavericks.
Keep me posted with how this works out. I am certain this is not an issue with the software. This software was designed and released to work with Mavericks and as explained I downloaded it so I can see it with my own eyes. (I didn't want to insist it would work and find out that there is actually a problem with it )
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Fuji xerox scanning still not working under 10.9.1 mavericks

Mac OS releases up until 10.8.x have allowed me to scan documents to my MacBook Pro from my (USB connected) Fuji-Xerox Docuprint M205b. Since updating to 10.9 and now 10.9.1, the scanner is not recognised. Printing works fine. (My last driver update file was FujiXeroxPrinterDrivers2.5.dmg).

Firmware v130 adds Mavericks compatibility http://www.fujixeroxprinters.com.au/en/Downloads.aspx?product=9934&category=5726 &os=8192

Importing scanned PDF not working

Hi,
I am trying to import a PDF to create a new form but when importing a PDF that was scanned in, nothing shows up, the form is blank.
If I try to use a pdf saved from another source it seems to work.
Why is this happening and is there any way to get around this? I am trying to scan in a 1099 tax form.
Thanks
Eric

Hi everyone,
 
 Can you please tell me which is called Pure xml? In InDesign what we are using. Can you give some guide lines about it.
 
 <?xml version="1.0" encoding="utf-8" standalone="yes"?>
 [Root]
 Start with root tag and end with [/Root] tag.
 
 Note: I have changed the tag mark in the above line "< >" to "[ ]" as it is not visible when i post this message.
 
 According to DTD the coding will change? First line is common for all xml coding. What about remaining things???
 
 Please suggest for this.
 
 Thiyagu

Scan ip not working in 11.2.0.1 RAC

Similar Messages

Maybe you are looking for