Scenario/Agent execution issue
Hi Experts
I am using ODI 10.1.3.5
I have 2 scenarios which are scheduled.
Scenario1 Executes multiple times in a day.
Scenario2 Executes once in a day.
Now if i change the time of the scenario2 and do an Update Scheduling in Topology manager, my Scenarion1 execution stops for the rest of the day which affects my data.
Is there any clue to come out of this problem.
regards
Gourisankar
My Package1->Scenario1 is scheduled at 3AM and run in every 4 hours throughout the day. [ *So the cycle will be 3AM , 7 ,11 ,3PM ,7,11 and back to 3 am* ]
My Package2->Scenario2 is scheduled at 3.30AM and will run once in a day. [ *once execution at 3.30 am so no issue* ]
Now if i have to run the scenario2 again at 2.30 PM in a perticular day.
Once i change the scheduling of scenario2 to 2.30PM, i have to do an "Update Scheduling" in topology manager.
[ *Now your Scenario 2 will be executed once at 2.30 pm , so no issue in this but i dont see any reason or way that i affects the scenario 1 execution cycle* ]
Now when i do an "Update scheduling" at around 2 AM, Scenario1 stops executing the subsequent cycle after 2PM for that perticular day.Next day onwords Scenario1 starts at 3AM and executes in every 4hrs.
[ *Here your scenario 1 will again startes at 2AM and so execution cycle wil lbe 2am , 6 ,10 am, 2pm , 6pm, 10 pm and finally 2 am which is not happening ,*
Here Scenario 1 starts at 2 pm and at 2.30 pm scenario 2 starts , which means due to some reason when you update scheduling for scen2 , between 2 and 2.30 pm , the scen 1 execution got changed and went back to default of 3 am cycle , so please check your settings properly .
So can you please check the option of Execution cycle and repetition option and check your starting and ending time too in case you have mentioned
The issue is the perticular day i change scheduling time for another Scenario or same scenario(Scenario1 in this case).
Because last execution cycle for Scenario1 should be around 11.50AM .
[*Going by the details you have mentioned above there is no way the last execution cycle be at 11.50 am it should be rather 11 am* ]
Similar Messages
-
AD-OID synchronisation Agent Execution Successful, Mapping/IMPORT operati
Hi
We are trying the AD-OID synchronization,using ActiveImport profile.
The bootstrap is successful. But synchronization status is Agent Execution Successful, Mapping/IMPORT operation Failure.
Attaching the trace file for import :
LDAP Connection success
Writer Initialised!!
MapEngine Initialised!!
Filter Initialised!!
searchF :
searchF : objectclass=*
[LDAP: error code 12 - 00000057: LdapErr: DSID-0C09065D, comment: Error processing control, data 0, vece]
ActiveImport:Error in Mapping EngineODIException: DIP_GEN_SEARCH_EXCEPTION
ODIException: DIP_GEN_SEARCH_EXCEPTION
at oracle.ldap.odip.gsi.ActiveReader.searchChanges(ActiveReader.java:303)
at oracle.ldap.odip.engine.AgentThread.mapExecute(AgentThread.java:395)
at oracle.ldap.odip.engine.AgentThread.execMapping(AgentThread.java:278)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:165)
ActiveImport:about to Update exec status
Updated Attributes
orclodipLastExecutionTime: 20070117121046
orclOdipSynchronizationStatus: Mapping Failure, Agent Execution Not Attempted
orclOdipSynchronizationErrors: Failure During Search
Ending Mapping execution.
null
Error in proxy connection : ODIException: DIP_GEN_AUTHENTICATION_FAILURE
ODIException: DIP_GEN_AUTHENTICATION_FAILURE
at oracle.ldap.odip.gsi.LDAPConnector.proxyConnectAs(LDAPConnector.java:350)
at oracle.ldap.odip.engine.AgentThread.updateExecStatus(AgentThread.java:607)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:208)
Updated Attributes
orclodipLastExecutionTime: 20070117121047
orclOdipSynchronizationStatus: Agent Execution Successful, Mapping/IMPORT operation Failure
orclOdipSynchronizationErrors: Agent Execution Successful, Mapping/IMPORT operation Failure
null
Error in updating the statusODIException: DIP_GEN_AUTHENTICATION_FAILURE
ODIException: DIP_GEN_AUTHENTICATION_FAILURE
at oracle.ldap.odip.gsi.LDAPConnector.proxyConnectAs(LDAPConnector.java:350)
at oracle.ldap.odip.engine.AgentThread.updateExecStatus(AgentThread.java:680)
at oracle.ldap.odip.engine.AgentThread.run(AgentThread.java:208)
Please help us to solve this issue.
we have one more issue.We used ActiveChgImp synchronization profiles for synchronization. But the profile ActiveChgImp deleted by mistake. Can create that profile (ActiveChgImp) one more time using createprofile, if so what prop_file I need to give for creating this?
Thanks in advanceYou can use
$ORACLE_HOME\ldap\odi\conf\backup\activechg.map.master to recreate activechgimp profile.
DIP_GEN_SEARCH_EXCEPTION error is generic error. Try setting high debug level to generate more details. -
Agent determination issue with no error, cant use SWPR?
Hello gurus.
We currently have 81 invoices that have workflow status "in process". However, the last line of this status is "agent determination issue". I've assigned the appropriate user in PFOM and i want to restart the workflow item, but i cannot use SWPR.
Normally it should be in error and you can use SWPR, and that fixes everything- however why is the workflow still "in process" and not in error? and how can i complete the workflow item now that the agent has been assigned? do i just create a new workflow using SWUE and delete the old one? Many thanks.Hi,
OK then try like this , as you said you do not have authorizations to SWI1_RULE right so do teh below steps,
1. Execute SE37 and execute the fucntion module ALINK_CALL_TRANSACTION.
2. Now mention the txn name as SWI1_RULE.
3. Now you should be able to see teh initial screen of the txn.
4. Now enter teh workitem ID which is in ready state not the top workitem ID, the workitem for which the agent is not assigned. Click F8.
5. Now choose that workitem ID and click CTRL + SHIFT + F11.
it should re evalutae the agents, if this is also not determing then make a note of the RULE ID from activity step and open the txn by using the above function module and try to simulate the rule or please let us know what is the rule type.
Regards
Pavan -
Dear all,
We have SCOM 2012 r2 , when we install agent through discovery . We got the below error
The Operations Manager Server cannot process the install/uninstall request for computer xxxxx due to failure of operating system version verification.
Operation: Agent Install
Install account: XXXXX
Error Code: 80070035
Error Description: The network path was not found.
Any idea what would be the issue here ?
Gone through some forum , but no luck
http://www.scapaot.de/blog/?p=291
Thanks,
74KMSHi
Kevin Holman has a great blog on troubleshooting agent install issues here:
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
The error you state has "Manual Agent Install" as the "fix".
Could you confirm:
1. The agent is in the same domain as the SCOM Management Server?
2. Can you do an NSLookup from the Management Server to the agent FQDN?
3. If you try and install the agent manually, do you get an error or does it complete?
Cheers
Graham -
Hi All
I need a clarification on Agent. May be a stupid question !!!
My Question is ,i am working in a dev environment. Now i want to schedule the scenario.
But my issue is where should i run the Agentscheduler.
is it on The server where teh Master and work Rep is created or onthe client machine from where i am creating my project and all???
Please help
Thanks
GourisankarHi Bos
Q1:-So if the Master/Work rep and target datastore are on diff server then i have to run the agent on target datastore server???
Q2: i don't have to configure the odiparam.bat/sh file on client machine to execute scenario if agent is running on server?? -
DPM 2012 Agent installation issue
I have SCDPM 2012 RTM installed on my machine and whenever I try to install the agent remotely , DPM services stops and installation stucks at 1 percentage,
Mohan Kumar.hi Both,
Yes I tried both the options mentioned but still I am facing the same issue. My Agent Co-ordinator service in DPM Master server goes stopped mode frequently. Below are the errors.
+ System
- Provider
[ Name] Service Control Manager
[ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName] Service Control Manager
- EventID 7036
[ Qualifiers] 16384
Version 0
Level 4
Task 0
Opcode 0
Keywords 0x8080000000000000
- TimeCreated
[ SystemTime] 2012-09-17T09:17:10.071569200Z
EventRecordID 86366
Correlation
- Execution
[ ProcessID] 588
[ ThreadID] 8352
Channel System
Computer NG171TDHYSCDPM1.rmgp.royalmailgroup.net
Security
- EventData
param1 DPM Agent Coordinator
param2 stopped
440050004D00410043002F0031000000
Binary data:
In Words
0000: 00500044 0041004D 002F0043 00000031
In Bytes
0000: 44 00 50 00 4D 00 41 00 D.P.M.A.
0008: 43 00 2F 00 31 00 00 00 C./.1...
+ System
- Provider
[ Name] Service Control Manager
[ Guid] {555908d1-a6d7-4695-8e1e-26931d2012f4}
[ EventSourceName] Service Control Manager
- EventID 7036
[ Qualifiers] 16384
Version 0
Level 4
Task 0
Opcode 0
Keywords 0x8080000000000000
- TimeCreated
[ SystemTime] 2012-09-17T09:17:10.071569200Z
EventRecordID 86366
Correlation
- Execution
[ ProcessID] 588
[ ThreadID] 8352
Channel System
Computer NG171TDHYSCDPM1.rmgp.royalmailgroup.net
Security
- EventData
param1 DPM Agent Coordinator
param2 stopped
440050004D00410043002F0031000000
Binary data:
In Words
0000: 00500044 0041004D 002F0043 00000031
In Bytes
0000: 44 00 50 00 4D 00 41 00 D.P.M.A.
0008: 43 00 2F 00 31 00 00 00 C./.1...
Mohan Kumar. -
Cloud App Discover agent install issues
I'm looking to deploy the Cloud App Discovery agent to start identifying opportunities to integrate other cloud services into our AAD.
However, I am having some issues getting the agent packaged up and installing correctly. Am getting an error which I suspect is related to install finding the cert, even though it is in the same directory as the install package.
Welcome any insight on this
1064:1930][2015-01-27T15:15:09]i301: Applying execute package: SerresEndpointClientSetup_64, action: Install,
path: C:\ProgramData\Package Cache\{7F0C0B74-C2D8-4D1E-8311-46E5F418C4F4}
v0.9.14.1\SerresEndpointClientSetup_64.msi, arguments: ' ARPSYSTEMCOMPONENT="1" MSIFASTINSTALL="7"
WIXBUNDLEORIGINALSOURCE="C:\Users\joh903679\Downloads\Microsoft Cloud App Discovery Endpoint Agent
\EndpointAgentSetup.exe" TENANTCERTPATH=""'
[1064:1930][2015-01-27T15:16:45]e000: Error 0x80070643: Failed to install MSI package.
[1064:1930][2015-01-27T15:16:45]e000: Error 0x80070643: Failed to execute MSI package.
[152C:2550][2015-01-27T15:16:45]e000: Error 0x80070643: Failed to configure per-machine MSI packageI Assume you are talking in context of the cloud services i.e. compute roles. what is the approach you have taken to process the installable on your role instances? have you defined any start up task?
You might want to try setting your role instances' execution context too.
You can refer this article for more information on using start up tasks - https://www.simple-talk.com/cloud/platform-as-a-service/installing-third-party-software-on-windows-azure-%E2%80%93-what-are-the-options/
Bhushan | Blog |
LinkedIn | Twitter -
Scenario Export /Import Issue: Import file error
The Procedure scenario when I am trying to import in higher environment, it is giving me error " Import file error" and when I click on Details, it shows following message.
I am trying to import scenario with INSERT/UPDATE mode and trying to replace with the same version. The scenario is executing fine in dev environment. What could be the cause. I have tried importing the same, 2-3 times ...even on different days with connecting and disconnecting the repository. What could be the reason. I am exporting the scenario from designer/procedure/scenario. using same option, I have exported the scenario many times but did not get any issue so far while importing into higher environment
&Exception track Trace 1 of 1
com.sunopsis.dwg.SQLWorkReposException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:953)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1224)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3386)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3467)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1350)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.ucp.jdbc.proxy.StatementProxyFactory.invoke(StatementProxyFactory.java:242)
at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:124)
at $Proxy3.executeUpdate(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.odi.core.datasource.support.RuntimeClassLoaderDataSourceCreator$StatementInvocationHandler.invoke(RuntimeClassLoaderDataSourceCreator.java:163)
at $Proxy4.executeUpdate(Unknown Source)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
at com.sunopsis.dwg.dbobj.generated.GeneratedSnpObjectId.insertAction(GeneratedSnpObjectId.java:271)
at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2885)
at com.sunopsis.dwg.DwgObject.insert(DwgObject.java:2908)
at com.sunopsis.dwg.DwgObject.createMissingReference(DwgObject.java:6779)
at com.sunopsis.dwg.DwgObject.correctMissingReference(DwgObject.java:6636)
at com.sunopsis.dwg.DwgObject.correctMissingReferences(DwgObject.java:7206)
at com.sunopsis.dwg.DwgDuplicationTools.createMissingRefAndReInsert(DwgDuplicationTools.java:2790)
at com.sunopsis.dwg.DwgDuplicationTools.importOtherObjects(DwgDuplicationTools.java:2385)
at com.sunopsis.dwg.DwgDuplicationTools.synonymImport(DwgDuplicationTools.java:1835)
at com.sunopsis.dwg.DwgObject.importFromObjectLst(DwgObject.java:6205)
at com.sunopsis.dwg.DwgObject.doImport(DwgObject.java:5705)
at com.sunopsis.dwg.DwgObject.importFromXml(DwgObject.java:5365)
at com.sunopsis.dwg.DwgObject.importFromXmlWithCommit(DwgObject.java:5410)
at com.sunopsis.graphical.dialog.SnpsDialogImportXml.doImport(SnpsDialogImportXml.java:360)
at com.sunopsis.graphical.dialog.SnpsDialogImportXml$1.doInBackground(SnpsDialogImportXml.java:1221)
at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker$1.call(SwingWorker.java:240)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at com.sunopsis.graphical.tools.utils.swingworker.SwingWorker.run(SwingWorker.java:278)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:662)actdi wrote:
This error is weird.+1 thats what I was thinking.
OP - Are you exporting from a Development work repos to an Execution Repos or another Dev Repos? -
Custom clearing agent payment issue
Dear experts
Purchase order was created and the material was received on port (imports).
custom clearing agent has cleared the goods.
now custom clearing agent needs his charges.
the inv from vendor with reference to PO is not received.
any solution to settle the custom clearing agent payments.
till the inv. from vendor not received custom agent payment is is pending.
what should be done to resolve this issue.Hi,
Copy one of your freight condition types and create a new condition type as custom clearing charges, please ensure that condition category is Delivery charges (B). In calculation schema enter this condition type at the appropriate position. Now when creating the PO, enter this condition type put the value, then select this condition type and go to details, here you will have a field to enter the vendor code, there key in the vendor code of custom clearing agent.
Now in MIRO enter PO no. and choose layout for Planned delivery cost, you can now enter the value for your agent and pay him.
Note: Please use this to pay only for service charge for the agent, for payment of custom duty you should use the condition type for custom duty and key in the vendor code for the customs clearing office there so that its easy to differentiate between custom duty and the service charges charged by clearing agent.
Regards
Chandra Shekhar -
Hello Experts,
We have developed one custom workflow a year back and last two months we are seeing the issue with Agent Determination randomly. We created a position with 3 users and assigned the Position to the Agent Assignment. Some times the work item sent to other users other than 3 users assigned to the position. We are not able to trace it, why it's behaving like this. Any help would be appreciated.
with best regards
K. Mohan ReddyIf this happens randomely then we can only assume
Please check the wflow log from SWIA whether someone has forwarded the workitem?
There can be also change in Position assignment, Substitute getting maintained.
Also check whether the users are maintained in the Task level if it is General forwarding Not allowed task from the task attribute.
Thanks
Arghadip -
Purchase to Order Scenario - Partial Confirmation Issue
Hello Team,
We are using Item Category with Purchase to Order Scenario. When the Sales Order is booked, Purchase Requisition is Created. Sales Order Line is linked to the Purchase Requision/Purchase Order.
In this scenario, we are getting confirmation on Sales Order through PR/PO Initially.
Order Quantity Confirmed Quantity
10 10
Once we receive partial confirmation on PO let us say 7 system only confirms partially Sales Order.
Order Quantity Confirmed Quantity
10 7
Issue happens when our team does partial delivery to customer before receiving full confirmation from the Supplier. System blocks further update of confirmation on the line and it becomes impossible to make delivery to Customer for Partial Quantity.
I can think of two options...
1. Somehow when we receive Partial Cofnirmation, our Availibility Check should confirm 7 on Confirmation recieved from the Supplier and 3 from Delivery Date of Purchase Order. So this issue won't happen.
2. System should somehow allow Partial Confirmation even after Partial Delivery is done to the Customer.
Do let me know if you need any more details from my side.
KaushalHi Kaushal,
i assume that you have special stock indicator in your sales order.
if you do not use confiramtion then all quantities are confirmed at schedule line level.
if you use confirmation e.x. 7 of 10 pieces then you will have confirmer 7 quantities in your schedule line.
if you create another confirmation in PO of 2 pieces and lets say different date you will see another schedule line in your sales order.
do your system works like this?
Is your third party scenario require a googds receipt for PO to move on to delivery?
Regards. -
RHEL4U4 EM64T Grid Control agent install issue
I've installed a 2 node Oracle 10G R2 RAC on RHEL4 U4 EM64T and it is working fine on Dell PE2850 servers. But I couldn't get the grid control agent installed on these RHEL4U4 EM64T PE2850 servers. The OMS server is running 32 bit Oracle 10g R2 on RHEL4. The issue is with the OMA (agent) install on EM64T and I've tried several different options (local install and push from the OMS server). I end up with the following error. Any feedback is appreciated. Thanks.
Raj
<<installActions2006-12-07_11-22-39AM.log>>
This is error we got from both the install on the local node and tried a push from the OMS server as well.
INFO: Start output from spawned process:
INFO: ----------------------------------
INFO:
INFO: /opt/oracle/product/10.2.0/agent10g/bin/genclntsh
INFO: /usr/bin/ld: skipping incompatible /opt/oracle/product/10.2.0/agent10g/lib/libxml10.a when searching for -lxml10
/usr/bin/ld: cannot find -lxml10
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/opt/oracle/product/10.2.0/agent10g/network/lib/ins_net_client.mk'. See '/opt/oracle/oraInventory/logs/installActions2006-12-07_11-22-39AM.log' for details.
Exception Severity: 1Hi,
Did you run cvu to check if all OS Patches are installed ??
Best Regards,
Paulo. -
Hi guys . While installing the agent on an asset Solaris system:
root@system: /var/tmp/OC $ /opt/SUNWxvmoc/bin/agentadm configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
agentadm: Version 12.1.2.2161 launched with args: configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
Validating step : workarounds configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
Validating step : db configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
/var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
Validating step : sc_console configure -u root -p /var/tmp/OC/mypasswd -x 172.21.16.65
verified sc_console command is OK
Validating step : setup_hmp configure -u root -p /var/tmp/OC/mypasswd
Validating step : scn_agent configure
scn_agent Common Agent Container environment is OK
Validating step : setup_net configure
skipping setup_net step for zone VC.
Validating step : uce_agent configure
Validating step : config_sysconfig configure
Validating step : final configure
End of validation
executing step : workarounds
workaround configuration done.
executing step : db
/var/run/cacao/instances/scn-agent/run/*.pid: No such file or directory
configuring db
INFO: hd_domain_vc_agent_db.sh decrypted the password.
Java DB creation and initialization for Domain Model successful
configuring jobs db
INFO: hd_jobs_vc_agent_db.sh decrypted the password.
Java DB creation and initialization for job manager successful
INFO: db decrypted the password.
executing step : sc_console
verified sc_console command is OK
Configuring sc_console
*checking existing sc_console connections
doing sc-console registration
Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:29:32 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:32:43 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: I/O exception (java.net.ConnectException) caught when processing request: Connection timed out
Jan 22, 2013 12:35:54 AM org.apache.commons.httpclient.HttpMethodDirector executeWithRetry
INFO: Retrying request
CE: java.net.ConnectException: Connection timed out
Code: 10
ERROR: Connection refused.
sc-console registration failed on [10].
sc-console : Unknown error. *
It does not seem to be connecting . What seems to be the issue here and how can I resolve it ?Hi,
it looks like the network error I had in the past. Doe haave a firewall between Client and Proxy ?
Is your client connected to more than one network ? If so it can be helpful to use the -a option.
I would check firewall andd routing.
Kind regards
tunix2k -
Hi Team,
My Agent whisper is not working on random calls. i have 9.0 ICM and CVP platform.
i have found error log on the call server.
1205522: 10.117.6.21: Nov 25 2013 06:39:02.472 +0000: %CVP_9_0_SIP-3-SIP_ERROR_SNMP: CALLGUID = 1AC098B454D311E383D35057A8D21E80 LEGID = 1AC098B454D311E383D35057A8D21E80-138536154206526348 - [OUTBOUND] Whisper Prompt Playback failed. Check the media name and address. VXML gateway logs can provide more detail with 'deb voip appl err' trace on. [id:5010]Hey David,
i got solution to it, it is just codec issue.
Regards
Pardha -
Hi All,
We are using agent Inbox as a workspace in IC Winclient (4.0). Agents are receiving activities in the inbox. the issue we are facing is that whenever an agent open an activity (not complete) just open it gets deleted from the his inbox.
I'll appreciate your Inputs.Hi Naren,
Did you add custom field using AET? If yes then while adding custom field using AET did you make it search and result relevant?
There is nothing like priority in standard SAP fields and custom fields.
Please let me know so that I can further help you.
Thanks,
Bhushan
Maybe you are looking for
-
IMPOSSIBLE TO USE A GROUPED MAIL IN A SCHEDULING ACTION
Hello Everybody, I am currently facing a problem while trying to schedule a report. In fact, when I use a simple mail like '[email protected]', the report is well sent. However, when I use a grouped email like '[email protected]', the people doesn'
-
Intense Problem with my iPod Video 60GB
Well, I put on my headphones and as usual scroll to Matisyahu, but found out there were NO SONGS on my iPod, there were also no videos. Now, I hook it to my USB on my PC, open iTunes and this appears: [img]http://img514.imageshack.us/img514/7972/ghks
-
Hi friends any one can reply this regarding Bdc
HI friends, in bdc irrepsctive of screen resolution we use one structure is used .for table controls... can u kindly tell me what is that...i just forgotten...and if code avialable regarding that it much more useful.
-
Hi MM Experts, We are able to successfully create a Message and sent to Vendor with following setting Process routies : Medium - 5 External send; Standard program i.e. SAPFM06P, FORM routine ENTRY_NEU and FORM: Custom made *However the client need a
-
Tax and Schedules in Bid/Bid Invitation
Hello All, We are setting up SRM Bidding engine for a public sector company. SRM 5.0SP11 with ECC 6.0. In Classic mode. Here the business critical requirements are: 1. Bidders should be able to use the tax codes in Bids from ECC like it is allowed fo