SCEP Definitions Detected In Console as Not Required When They Are

I'm pretty sure I'm probably just overlooking something simple, but I've seen this in two labs I've setup. It appears SCEP definition are showing as not required in the ConfigMgr console, but if I look in WMI on the client (Class: root\Ccm\softwareupdates\updatesstore)
I can see it appears to be detected as missing (which is correct).
Background:
Site Mode: HTTPS, I was using Configuration Manager 2012 SP1 with the same result. I updated the site to SP1 CU1 (Servers and Clients) same thing (For XP, 7, 8, Server 2012).
I've installed KB2828233 on the site server still can get clients to detect "Definition Update for Microsoft Endpoint Protection - KB2461484 (Definition 1.149.286.0)" as applicable on clients in the console. I've installed KB2831316 on the
clients same thing. I'm syncing Forefront Endpoint Protection 2010 for the product as i'm pretty sure these are the definition used to SCEP 2012.
I've tried setting the disable alternative sources for endpoint to yes and no (Same result) although this shouldn't have anything to do with being detected.
I'm not sure if any of you may have advice or seen this. All other Windows updates are showing/detecting correctly in the console i'm even publishing third party updates with SCUP that detecteds just fine.
UPDATE 9:28 - So I downloaded and created an available deployment for the definition update. The clients do get the update in Software Center and I can install it successfully, but it's still showing as not required in ConfigMgr Console
even after I install it the update doesn't report back as installed.
On Client connection to updates on WMI using CIM Studio:
On Server (Showing as not applicable):
Thanks,
Justin Chalfant | Blog: setupconfigmgr.com | SCUP Catalog: patchmypc.net/scup | Please mark as helpful/answer if this resolved your issue

Hi Nash,
I've just setup a new SCCM 2012 R2 CU3 and am seeing the same behaviour.
Updates install just fine, but are shown as Not Required instead of Installed.
Did you get an answer from MSFT on this?
Thanks for sharing!
Filip

Similar Messages

I keep getting "cookies are not enabled" when they ARE on my Mac, so can't sign in to Facebook

I use Mac OS 10.5.7 and have for a very long time. I was using a slightly older version of Firefox although I update when prompted. Now I am using Firefox 3.6.13 Although working fine for a very long time w/ no problems, suddenly I cannot get signed into Facebook OR Netflix because I get an error message saying my "cookies are not enabled in browser". They ARE enabled, and I've repeatedly emptied the cache, rebooted, quit and restarted Firefox, changed passwords for Facebook. NOTHING gets me in.

If clearing the cookies doesn't help then it is possible that the file cookies.sqlite that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete cookies.sqlite-journal and cookies.txt, if they exist, in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case the file cookies.sqlite got corrupted.
* http://kb.mozillazine.org/Cookies#Removing_cookies
* http://kb.mozillazine.org/Websites_report_cookies_are_disabled

Contacts are not appearing when they are imported after wipe!!! HELP!

I have a Z1 running 4.4 and so far this is the most annoying bug ever!
This has happened after I tried to do a full wipe on SUS!
It seems that after I import my contacts from my sd card, everything is okay. However, I use an HD Contact app which often requires me to wipe my contacts list a few time just to refresh the photos.
When this wipe happens, my contacts do not anymore appear on my list even though the system says "Contacts added/imported"
My list remains blank except for the "Emergency Number" and "Myself" entries.
My god!
I have tried to run it on Safe Mode, hard restart, reboot, force stop the Contacts app yet nothing seems to work!
The only solution is a full wipe again and again.
This has never happened before the 4.4 update or when I tried to reinstall 4.4 via SUS.
Is anybody having the same dilemma? I could really use some help

Hi,
Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts.
What are your thoughts about this forum? Let us know by doing this short survey.

Graphical Glitches: Objects appear not selected when they are, Symbols not appearing correctly

I've been having a ton of graphical glitches with Adobe Flash CS6 and I can't for the life of me figure out for the life of me.
Things that happen:
Objects will not appear selected when using the Free Transform Tool.
Symbols don't appar in scene when pasted, or dragged in until I leave the scene or symbol im in. They show up in the preview window though.
Something else I've been noticing is that when I use the Pen tool my computer or speakers or something making this werid noise and it only happens when I'm using the Pen tool.
Any help would be greatly appreciated.

No one has had these issues? I just got another one. My timeline disappeared, I don't mean the menu hid or thats it not there. It's there its just not actually displaying the Timeline or at least it didn't till I wen't back a few changes for some reason. It was still there though as I could click the eye and lock and the layers (which ones I have no idea) it was all grey. Also again the selection area doesn't show up, all movements of symbols are slow to update their postitions and when I turn on outlines it does nothing.
Also everytime I close Flash I get an error from windows, no idea why.

Why do my forwarded links not open when they are recieved

when i try to forward a copied link in my e-mail service- the person
receiving the e-mail cannot open the link-it is not active-i copy from the address bar and then paste to the e-mail i am sending-
this does not happen in internet explr- is their some option i can use
to correct this--thanks -----david

-Asked to sign in after paying
--http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

Skype emoticons are not showing when they are ight...

Just like the subject says when i try to put a emoticon and not leave at least one space between the emoticon and the text it won't show the emoticon, it will only show the shortcode like: " (kiss)hey" and not the actual emoticon. If i leave space between them the emoticon will show up like usual. If anyone can help me to solve this i will be very thankfull.

Unfortunately, this is how it behaves now on the latest Skype versions (at least on 7.1 and 7.2). With the older Skype 6.21 it was possible to send emoticons and text without separating them by a blank space.

Error message says cookies are not enabled when they are...HELP!!!

I've been delaying trying to solve this problem. I have a power mac g4 currently running 10.5.8. After installing this back in august of last year I have been unable to fully go on some sites because I get an error message that says my browser is not configured to accept cookies. Problem is both firefox and safari are enabled to accept cookies. Then when I try to log into yahoo mail the url is refreshing but yahoo mail site is not opening. Now, I have re-installed 10.5, I have reset safari, emptied the cache, deleted cookies and nothing has worked. My computer doesn't have a virus and I'm at my wits end trying to figure this out. I never had these issues prior to installing the new system. I appreciate any help with this problem.

Repairing permissions is important, and should always be carried out both before and after any software installation or update.
Go to Disk Utility (this is in your Utilities Folder in your Application folder) and click on the icon of your hard disk (not the one with all the numbers).
In First Aid, click on Repair Permissions.
This only takes a minute or two in Tiger, but much longer in Leopard.
Background information here:
http://support.apple.com/kb/HT1452?viewlocale=en_US
and here:
http://docs.info.apple.com/article.html?artnum=302672
An article on troubleshooting Permissions can be found here:
http://support.apple.com/kb/HT2963
By the way, you can ignore any messages about SUID or ACL file permissions, as explained here:
http://support.apple.com/kb/TS1448?viewlocale=en_US
If you were having any serious problems with your Mac you might as well complete the exercise by repairing your hard disk as well. You cannot do this from the same start-up disk. Reboot from your install disk (holding down the C key). Once it opens, select your language, and then go to Disk Utility from the Utilities menu. Select your hard disk as before and click Repair.
Once that is complete reboot again from your usual start-up disk.
More useful reading here:
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://support.apple.com/kb/TS1417?viewlocale=en_US
For a full description of how to resolve Disk, Permission and Cache Corruption, you should read this FAQ from the X Lab:
http://www.thexlab.com/faqs/repairprocess.html

Buddy not active when they are

I have a long list of Buddies, but two of them always show as offline even when I know they are online. They are both on AIM accounts. I tried deleting them from the buddy list and readding them but they still showed as offline. I then deleted them and had them invite me to chat. That worked to have an active chat, but when I added them to my buddy list from that chat they immediately become inactive in the buddy list. Although the chat they initiated was still active.
Any ideas

Following on with branst's post, I once had a problem like this with an aim buddy's screen name that was correctly typed, just as my screen name was correctly typed on his buddy list. He didn't show up on line to me but I did to him. I couldn't initiate call but he could and I could participate. Something had corrupted something somewhere. Never figured out what it was but we did get it fixed. Here is what we did: One of us had to delete the other from his buddy list, then the other delete the one from his buddy list, so there was a period of time where neither of us was on the other guy's buddy list, then we could readd each other, and all was well. Doesn't make sense to me why that worked, but it did. Maybe it'll work for you.

HT204380 Why does it say the other person is not available when they are. My kid can call me but I can't call them..

I have an iPad 4 and they have an iPod 5 th generation. We have a wifi in the house. Getting ready to go away and want to make sure it works..

If more than 1 device is using the same Apple ID this issue can happen using FaceTime.

Update "Is not required" when it is required for some workstations

Hi all - Question in regards to how SCCM/WSUS determines if a patch is applicable to a machine. Some background info. We have 168 Dell Venue tablets running Windows 8, not 8.1 (that's another story). All were imaged from SCCM with
the same image so they should all be identical in regards to software and patch levels. I'm trying to deploy KB2756872. Of the 168 machines 150 are showing as "Not Required" for the patch, 18 are showing as "Required".
I've successfully manually installed the .msu on a couple of the "Not Required" machines with no problem. Running the "My Dell" utility shows the patch as required on the machine so why does SCCM think it is not?
Questions is why are most showing as "Not Required" when the patch is applicable? Is there a way to figure out what exactly is being evaluated to determine whether a patch is or is not required?
Thanks as always,
Rick

The ConfigMgr client agent just controls the Windows Update Client agent (which performs the scan against the SUP's catalog). Any chance that the update is classified as an optional one?
Torsten Meringer | http://www.mssccmfaq.de

I recently had to get a new computer, my list of audible books is there but can't open because original file cannot be found. how do I find them or redownload them when they are not in my purchased list anymore?

I recently had to purchase a new computer, after doing so I no longer can open my audible books. the list is there, but I get an error message telling me that the original file cannot be found. How can I redownload them when they are not in my purchased list anymore when I go to the Apple Store??

Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

Workflows not triggered when documents are created in Doc Set via Content Organizer

The following is my scenario:
A document set (containing several documents) is created in Library A on Site A
Using Send To, the Document Set is sent to the Drop Off Library on Site B (a different Site Collection)
A Content Organizer rule then moves the Document Set and its documents to destination Library B
In Library B I have defined a workflow (using Visual Studio 2012) that is triggered when new item is create
When the Document Set arrives in Library B from the Drop Off library (i.e. when the Content Organizer moves the Doc Set to Library B), the workflow is triggered (and executes) on the Document Set, but it is NOT triggered on the documents within the Document
Set. How can I get the workflow to trigger on the documents within the set when they are created via the Content Organizer rule?
The interesting thing is that if I manually add another document to the Document Set in Library B, the workflow is triggered on that document. It just does not trigger when the documents are created via the Content Organizer.

Hi,
In edit Content Organizer rule page, I see there is an option as Automatically create a folder for each unique value of a property:
However, unlike the drop down used in the property based filters above, this drop down *only* contains properties that are required by your content type.
This is done to prevent adding folders that have no values for a property.
If you need to put similar documents to the same folder, you could consider making use of this feature.
Regards,
Rebecca Tu
TechNet Community Support

WOT and Webutation is showing as disabled when they are not

WOT and Webutation is showing as disabled when they are not .The icons show,but no color on icons. Says WOT is disabled when its not. Also the same on Webutation. Tried uninstalling then reinstalled both and the same thing happened. Tried Wot on another users account and theirs work. Can someone help me on these issues?

capaho wrote:
That's like saying a boat is an airplane because it's not a car.
SMH
In other words, how does your explanation account for ED (enhanced definition)?
ED is generally considered to be 576p or 480p, but this is not universally accepted and these resolutions are often accepted as HD also. Additionally an ED signal uses non square pixels just as SD does so the horizontal pixel dimensions should be no more than 720. Exactly how the tv would treat these resolutions I don't know (yet).
If you have a copy of the source code for the function that displays the HD icon, please post it so I can take a look at it.
Why should I have such a copy and why is it relevant. The issue here is that the OP believes his video is incorrectly labelled HD which is not the case. There may or may not be anomalies in the way the tv attributes the HD label to some files (although it isn't the case for me), however the OP has incorrectly converted his source video and they are no longer SD, they are also not ED by whichever definition you wish to apply and any such anomalies should they exist are not responsible for the OP's files being labelled HD.

How do I send files from my IMAC via bluetooth to my ne Ipad. They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipad but the failure message says the ipad does not have the ncessary servr

How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?

File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.

HT6114 I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously.

I have upgraded to OS X Mavericks and my MacBook keeps crashing and my numbers and pages programs will not open as they are being updated continuously

The next time the crash happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

SCEP Definitions Detected In Console as Not Required When They Are

Similar Messages

Maybe you are looking for