SCM and CRM Multiple Clients in one system

Dear all,
I want to ask a question regarding Multiple clients in SCM 5 - IDES and CRM 5 -IDES.
I installed the system and plan to have multiple clients in a system with copying client 800 (IDES) to others.
I heard opinion that it can't possibly be done because if during the exercise the Administrator Workbench is executed it will search to the source client (800) and probably affect the exercise.
Would you mind giving me more suggestion about this?
Thank you.
Fausto

Hi Fausto,
Could you be more specific about what you need to achive?
You can always creat a new client, logon to the client and do a client copy with TCod SCCL.
If you logon to other IDES clients then You'ld overwrite the content of the client which have been pre-configured.
Check the status of the client you need to overwrite from TCod scc4.
Also to verfiy the status of the target client for TCod se06 -system change option.
Regards,
Tolulope

Similar Messages

SMSY//Logical component definition - multiple roles for one system?

Dear all,
as our client has a divided system landscape (three-tier operational line as well as two-tier development line) some systems have more than one role to fill. The development system on development line is source system for all developments, as well as post-processing system for retrofit purpose from operational line. The maintenance system on operational line is target system for developments from development line, as well as source system for maintenance activities on operational line.
--> What are the consequences of assigning multiple roles to one system?
--> Is there anonther option than assigning multiple roles?
Best regards
Nick

We have Event Manger 7.0 installed into a stand-alone SCM 7.0 system. When trying to set this up in SMSY, the only options given for setting up the Logical System is to associate with with EHP3 or EHP4 for in ECC 6.0.
Obviously we have not installed EM into ECC. So where are the other appropriate entries in SMSY for recognizing that EM is installed in SCM?
1) This system must be maintained as SCM 7.0 in SMSY and not as SAP ERP 6.0 or EHPX for SAP ERP 6.0, this is the reason as you can see this system SCM 7.0 can be assigned just to SAP ERP 6.0 or EHPX for SAP ERP 6.0.
2) There's no Main Instance available to be selected when you have a SAP SCM 7.0. You must select one or more of the following main instances below.
BI Content
SCM Server
cFolders on SCM Server
GEOCODING
Portal Content
SAP LiveCache
SAP NW - Adobe Docu. Service
SCM Optimizer
SCM WCL
XI Content
These are the main instances available to SCM 7.0

Connect CRM multiple clients to ECC

Hi SAP Gurus,
I have one Question regarding CRM->ECC connectivity.
Will it be possible to connect multiple clients of CRM to ECC ? Like more than one client can talk to ECC ?
Because in BW we can not connect multiple clients to source system ! does this true with CRM also or not ?
Thank you

1) As datasources are client independent so do we need to activate the datasources (like 2lis*) in all clients one by one? or just activating in one client will make it ?
You need to activate the datasources individually for all the client. If you will activate in one client, it will be specific to that only
) If we replicate the datasources for new clients in BW side and then want to reload the data from New clients (set-up tables filling and INIT)?would it have an affect on existing deltas (for datasources 2lis*)for existing Source client 100? What shud be the precautions? How we can proceed?Please let us know your opinons plz
If you will replicate in one client system, it wont affect delta and init from other client.
One thing you can do, to identify data from different source systems, you can use source system compounding in your infoobjects. Make sure you are not loading data from both the client at the same time. it may lock the DSO and master data.

Multiple clients in Developement system for Charm

Hi Solman experts,
We are planning for the Charm implementation and we have multiple clients in Developement system.
Major hurdle is how to keep all the development clients in sync.
we have following clients
100 Golden client
300 configuration client
400 ABAP Developement client
500 Unit test
600 HR1
700 HR 2 clients
All configurations will be made in Client 300 and transported to QA and all developements will be made in client 400
Transports released from 300 and 400 should go all other clients.
Solman experts could anyone advice whether this is can be done using charm.
regards
Naveen

Hello Naveen,
Please, check the point 1 of the following link:
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
I think that this link can answer your question.
Best Regards,
Diego Fischer

Scan and collate multiple pages to one document with hp8630

How do I scan, collate and save a multiple page document into one pdf document utilizing an HP8630? Thank you.

Hi , I understand that you would like to know how to scan and collate multiple documents into one file. I would be happy to help you.
If you are using Windows, please try the following steps: From the HP Scan software, select Advanced Settings, click on the File tab and uncheck Create a separate file for each scanned image, this will allow multiple page scans to save to one file. If you are using a Mac, try the following: From the Preview Software, once you have the scanned image, select PDF and check combine into single document below. From the Print and Scan window, select PDF and check combine into single document below. What operating system are you using?How to Find the Windows Edition and Version on Your Computer.Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer? If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

MiniWAS 6.20 AND SneakPreview 6.40 on one System

Hi,
is it possible to install both MiniWAS 6.20 AND SneakPreview 6.40 on one System ?
In the SneakPreview 6.40 help-File is says:
"If you have installed a previous version of SAP Web Application Server, you have to remove it prior to installing this edition."
I just installed miniwas 6.20 and dont want to crash it by installing sneak preview.
Any comments ?
elko

I shut down all database services (as I used a win2000 system), renamed the sapdb root directory and started a new sapdb installation with the installer from the WAS 6.40 Sneak Preview DVD. Finally you have to change the configuration settings (database id etc.).
Since I am quite new to SAP I cannot estimate if the change succeeded.
However, there might be an easy way to match your requirement:
The WAS 6.40 CeBIT distribution is available for download:
ftp://ftp.sap.com/pub/linuxlab/test_drive/
It contains both ABAP and J2EE stack on a single system. It is reported that an installation succeeds without any problems on a suse linux entreprise server. Since I am waiting for those WAS CD's I cannot give more advice now. Recent linux distributions are reported to fail. Maybe it depends on the kernel. Do not use 2.6 kernels.

Multiple clients and multiple databases on one system

Does SAP support having a single system ( Let's call it PEQ for the sake of argument ) having multiple clients ( again, for the sake of argument, call them 200, 250, 260, and 300) allow for each client to have it's own physical database ?
For example, here is what I would like to have set up:
PEQ 200 - database 1
PEQ 250 - database 2
PEQ 260 - database 3
PEQ 300 - database 1
So PEQ 200 and 300 access database 1, PEQ 250 accesses database 2, and PEQ 260 accesses database 3.
I only want to know if this is possible and if so how would you set it up. I do not want to get into any discussion on whether this is the best way to go or not. Any pointers to OSS notes on the subject are more than welcome.
Thanks;
Bruce

> So PEQ 200 and 300 access database 1, PEQ 250 accesses database 2, and PEQ 260 accesses database 3.
>
> I only want to know if this is possible and if so how would you set it up. I do not want to get into any discussion on whether this is the best way to go or not. Any pointers to OSS notes on the subject are more than welcome.
Simple answer: No.
Long answer:
- Workprocesses don't know anything about "clients". A client is nothing more than an additional field in a table with the client number. So it's not possible to configure them to connect to a certain database using a "client number".
- A client alone has nothing but application data. It has no dictionary (tables, views) and it has no repository (source code) that can be executed
- A SAP system (ABAP) has cross client customizing that would need to be shared somehow, technically not possible since also here the workprocess (which is the lowest unit) does not know whether a table is client dependent or not.
Maybe there is a way to come out of this dilemma - if you tell us, what you (business) requirement is.
Markus

SAP CRM multiple clients possible

Hi,
We have a NetWeaver SAP CRM system (ABAP + JAVA) stack.
We run an internet webshop application on the JAVA stack connected to CRM ABAP stack, client 010. The CRM ABAP stack connects to SAP ERP.
Q1: Is it possible to add a new client 020 in the ABAP stack of the CRM system?
Q2: I don't understand in CRM the connection between the JAVA and ABAP stack. If I add a new ABAP client 020, do I need to copy the JAVA stack/client also?
Who can help me guiding in which direction I have to go?
Note: We want to connect a non-SAP system to client 020.
Overview:
ERP ABAP (client 010) --> CRM ABAP (client 010) --> CRM JAVA stack
non-SAP (legacy system) --> CRM ABAP (client 020) --> CRM JAVA stack
Q3: What are the problems (challenges) I can expect?

Hi Rene,
I think it is not supporting multiple clients. Wait for some additional replies.
Regards,
Ravindra

XI and R/3 Installation on One System

Hi,
I am new To XI and I want to install XI and R/3 in My Local System. Can i install both in one system (OS)? If yes, what is the minimum requirement for this?
If any one have did this, please help me.
Thanks,
Sridhar

Hi Sridhar,
Download this Doc and Fallow...
http://help.sap.com/bp_scmv150/documentation/SCM50_system_reqs.doc
Fallow the below documentation...
System Requirements for
SAP Best Practices for SCM 5.0 Scenarios
Use
The objective of this document is to help system administrators to prepare an SAP SCM system for the installation of one or more SAP Best Practices scenarios and to ensure the system setup meets the requirements for the installation.
This document does not provide information on how to set up the entire SAP SCM system, itself, but provides you with useful additional information and troubleshooting tips.
System Landscape
To install one or more of the SAP Best Practices for SCM scenarios from this CD, you should refer to the system landscape described below and compare it with your own existing system landscape as an installation prerequisite.
Please note that the support package levels indicate the minimum support package level your system landscape should have. If higher support packages exist, we recommend that you install the highest available support package.
To install and use any SAP Best Practices scenario, you must have installed an SAP R/3 and an SAP SCM system.
SCM 5.0: Complete Version
SAP SCM 5.0 contains the following business application components on one system platform:
     SAP APO 5.0
     SAP EM 5.0
     SAP ICH 5.0
The following table provides an overview of the software component details of the SAP SCM system:
Software Component     Release     Level     Highest Support Package     Short description of Software Component
SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
SAP_ABA     700     0007     SAPKA70007     Cross-Application Component
ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0007     SAPKIPYI77     Basis Plug-In (PI_BASIS) 2005_1_700
SAP_BW     700     0007     SAPKW70007     SAP NetWeaver BI 7.0
SAP_AP     700     0004     SAPKNA7004     SAP Application Platform 7.00
LCAPPS     2005_700     0002     SAPKIBHD02     LCAPPS 2005_700 : Add-On Installation
EA-IPPE     400     0003     SAPKGPID03     SAP iPPE (EA-IPPE) 400
SCM     500     0004     SAPKY50004     Supply Chain Management 5.0
SCM_BASIS     500     0004     SAPK-50004INSCMBASIS     SCM Basis 5.0
QIE     200     0004     SAPK-20004INQIE     Quality Inspection Engine 2.00
BI_CONT     702     0002     SAPKIBIHP2     Business Intelligence Content
Optimization Server Version:
Identifier     Version
CTM01     5.0_REL SP04, 356375
DPS01     5.0_REL SP04, 356375
CS01     5.0_REL SP04, 356375
SEQ01     5.0_REL SP04, 356375
SNP01     5.0_REL SP04, 356375
VSR01     5.0_REL SP04, 356375
Live Cache SP05 (LCA50.05, LC 7.6.00.22)
LiveCache version:     KERNEL     7.6.00   Build 022-123-119-055
DBM server version:      DBMServer 7.6.00   Build 022-123-119-055
Operating system:     SunOS
LCA version:          Module          50   Build 05
SAP APO GUI
We recommend that you install the SAP APO specific SAPGUI add-on, which is required for certain business transactions.
SAP ECC System
SAP ECC Enterprise with Extension Set 1 (for the SAP Best Practices scenario Fulfillment Visibility we used an SAP R/3 Enterprise system with Extension Set 2)
Software Component     Release     Level     Highest Support Package     Short description of Software Component
SAP_ABA     700     0007     SAPKA70007     Cross-Application Component
SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
ST-PI     2005_1_700     0001     SAPKITLQI1     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     0007     SAPKIPYJ77     PI_BASIS 2005_1_700
SAP_AP     700     0004     SAPKNA7004     SAP Application Platform
SAP_APPL     600     0004     SAPKH60004     Logistics and Accounting
EA-IPPE     400     0004     SAPKGPID04     SAP iPPE
EA-APPL     600     0004     SAPKGPAD04     SAP R/3 Enterprise Add-On PLM, SCM, Financials
FINBASIS     600     0004     SAPK-60004INFINBASIS     Fin. Basis
BP-ERP05     600V2     0000          SAP Best Practices All-in-One based on ERP 2005 (ECC 600)
SAP XI System
If you want to install the SAP Best Practices scenario Supplier Managed Inventory, Release Processing, Responsive Replenishment, Contract Manufacturing Procurement & Supply Network Inventory, Kanban-based Replenishment, you also need to implement an SAP XI system.
Software Component / PI Content     Release     Level     Highest Support Package     Short description of Software Component / PI Content
SAP_BASIS     700     0007     SAPKB70007     SAP Basis Component
Content for SAP BASIS     700     0007          XI content for SAP BASIS 7.0
Content for SCM     500     0004          XI content for SCM 5.0
Content for SCM BASIS     500     0004          XI content for SCM BASIS 5.0
Non-ABAP components, such as the Integration Builder and the Integration Repository, must also be installed and have the respective support package levels.
For uploading the content in the XI System, refer to SAP note 836200.
Checklist after the System Setup
     SCM Menu
After you have installed the SCM System, you may have to set up the menu that you want to use.
To do this, access transaction SE38 and run the report /SCMB/SM_VERS.
Choose Full Version and then, choose Execute.
     Check Planning Version 000
In your SAP SCM system, use the following path:
SAP Menu  Advanced Planning and Optimization  Master Data  Planning Version Management  Model and Version Management
Make sure that the planning version 000 Active Version is available.
If this planning version is not available, this means that the LiveCache has not been initialized. Proceed with the LiveCache initialization before you start with the installation of any SAP Best Practices scenario.
     Check that PSE services have been activated
Use transaction strust in your SCM system. All services should have a green light. If it is red, activate all of them. There is no need to reboot the system afterwards.
OPTIMIZER
1.     Checking that the Optimizer has been installed
Transaction SM59  RFC Destination  OPTSERVER_CTM01  Test Connection
If the connection cannot be established, this may be due to the following reasons:
     the Optimizer has not been installed
     an error occurred during the installation of the Optimizer
2.     Checking that the Optimizer SPs have been installed
Open transaction /SAPAPO/OPT09. The Optimizer Support Packages should be identical to the Support Packages of the SCM system.
     Ensuring that the APO relevant PI Settings are activated in SAP ECC
You have to make sure that the business transaction events are active in the SAP ECC system. Only if these events are active for the SAP APO integration, will changes to the transaction data be transferred from the SAP ECC system to the SAP APO system. This setting should have already been performed; this is just a reminder in order to avoid possible problems later on. Use the following procedure:
In your SAP ECC system, open the transaction BF11.
Confirm the message The table is cross client.
On the Change View: Application Indicator: Overview screen, check that the applications ND-APO, PI-EM and NDI are active, i.e. selected. If they are inactive, select the check box to activate them.
Choose Save and go back.
Web Communication Layer (WCL)
Ensure that the WCL is installed correctly: Usually the WCL should be connected to the client 001 of the SCM system. Use transaction /saptrx/wcl_search in the SCM system to open the WCL. If a logon pop-up appears, then the WCL is set up correctly. If the message WCL is not installed... appears, the respective set up settings should be checked and corrected, if necessary.
Additional Information
For additional information on issues such as architecture, sizing, platforms, and upgrades, refer to following page on the Service Marketplace:
alias /SCM  SCM Technology
For information on system monitoring, system administration, volume testing etc., check SAP note 572003. You can also refer to the Service Marketplace, using the alias /SCM  SCM Technology  Table of Contents  Solution Management  Best Practices for mySAP SCM Solution Management.
Thanks,
Satya Kumar..

TMS configuration for multi-clients in one system

Hi All,
we have got some problem defining transport routes in stms in transport domain...
We have to add to target group for one system 6 clients:3 clients with the dev/test roles for country X and 3 clients with dev/test roles for country Y.
Transport requests have to route only between clients for defined country (only for country X or only for country Y, must not mix).
How i can get status when transport requests will route in one system only between clients of country X (or only for country Y)?
Should i define two target groups and add to one group 3 clients for X and to the second 3 clinets for Y? I am not sure that it is enough. May be exists a lot of other options/ actions?
Where is garanthy that requets from country X will not mixed with requests from Y?
Thanks a lot.

> The SSO is working fine for only the client which we used to import the certificate (verify.der).
> 1>Is it that the certificate import should be done from all the clients exclusively ?
Logon ticket certificate is instance wide, not client dependent. And you need to call STRUSTSSO2 in client 000 to export/import.
> And the SSO is not working for other clients in the same system .
> 2>If yes can you tell the procedure, why b'coz transaction STRUSTSSO2 is same for all clients and if we try to import the certificate again how about the existing one over there ?
Could you provide more details about this issue you're facing? What is the Portal UME source? What application is it based on, BI or ESS/MSS?

RMI: multiple clients for one RMI server?

Hi,
We're thinking of making a RMI Server.
However, can multiple clients access the same RMI Server at the same moment?
So, if one client is connected to the RMI Server, what will happen with the other clients that want to work to do the same thing at the same moment ?

all over the same port?
so for example, 100 clients can work simultaneously on this simple server?
import java.rmi.Remote;
import java.rmi.RemoteException;
public interface OkServer extends Remote {
    public String getOk() throws RemoteException;
import java.rmi.server.UnicastRemoteObject;
import java.rmi.RMISecurityManager;
import java.rmi.RemoteException;
import java.rmi.Naming;
public class OkServerImpl extends UnicastRemoteObject implements OkServer {
    public OkServerImpl() throws RemoteException {
    public String getOk() {
     return "ok";
    public static void main (String args[]) throws Exception {
          System.setSecurityManager(new RMISecurityManager());
          OkServerImpl OkSvr = new OkServerImpl();
          Naming.bind("OkServer", OkSvr);
}

Int between SCM and CRM

Hello SAP experts !!
I have been requested by my client to look at the integration between SCM ( APO) and CRM 7. I have looked at the SAP help files and I am familiar with CRM - however the information is not enough for me to perform a proto type that client will accept going forward
Can you assist?
Raj

Hi
The integration between SCM (APO) and CRM is mainly for AVALABILITY CHECK and AVAILABILITY with ALLOCATION scenarios. (ATP against allocation)
This SAP Note -719627 will be useful.
Regards

Would like to be able to select and move multiple folders in one operation.

Unless I'm missing something really simple here, there doesn't seem to be any easy way of selecting and moving multiple folders at once.
Here's a little example of a simple task I want to do. I presently have a multitude of folders each seperated by the day the photo was taken on. So in my case for a given year I might have maybe 50 folders or so. It's getting a little cluttered, so all I want to be able to do is to take all the folders for one given year and place them in a folder with that year's date. This should be a simple 30 second task, simply select the folders I want moved by either <CTRL> or <SHIFT> clicking them, and then dragging and dropping them into the new folder.
Right now, the only way I've figured how to do this this is to drag and drop each folder one by one, never mind that this is a slow process in itself, but to add to the slowness, whenever I try to drag and drop more than one folder consecutively, I get a message saying ... "Can not move a folder while another move operation is in progress...blah blah". Not that I want this to be the fix, but haven't they heard of queuing?
I've seen people on the net suggest that for this type of task, you should simply move the folders in Windows first and then locate them in Lightroom. Again, unless I'm missing something very simple here, there doesn't seem to be a way to locate multiple missing folders at once. If I have to manually locate each missing folder one by one, then I'd rather just do the drag and drop thing as this would actually be faster.
I've also tried moving the folders from within Windows first and then using the "Synchronize folder" option, yeah sure this works, but I lose any changes that I've done in Develop module. Not what I'm looking for.

Daniel is right. It´s really strange that I can´t move several folders in one move! When I need more space on my laptop I move a group of folders (one folder for every photosession) to an archive. Therefore I really would like to move them in one click, not "baby-sitting" the move of each folder.

Storing and retrieving multiple values into one cookie.

Hi Everyone,
I am wondering if anybody knows of any good tutorials involving storing multiple values into one cookie. Any URLs will be greatly apprecated. Thanks heaps.
Regards
Davo

These are normally delimted in HTTP by a semicolon. You can concatenate the string yourself and on the reverse trip use StringTokenizer to get the values back out.
- Saish

Multiple servers and multiple clients on one machine

Hi,
I was hoping someone could give me some direction as to how to go about creating multiple servers and muliple clients on the one computer using RMI and threads. I intend to have say 4 servents (able to perform both client and server methods) running on the one computer, with the clients being able to connect to each of the servers. (I'm doing this to emulate using 4 computers, which I don't have!). I know I have to use different ports to do this. How do I go about the following using RMI - start up a server (port number as argument from command line?), which starts a thread listening for connections from the other clients.. when a new connection is established between server and client, then start a new thread which 'handles' that connection.
The examples I've seen of RMI only deal with single server and single client... I'd appreciate any suggestions as to how to go about this problem!!

Hi,
I suggest not to use the rmiregistry program at all
but to start the registry in a program of your own.
Then you can specify all you need (url, port, even
client and server socket) as command line argument.
You need something like this:
Registry registry = null;
Remote server = null;
try
{ // this succeeds if the registry already runs
registry = LocateRegistry.getRegistry(yourRegistry);
server = registry.rebind( yourServer );
}catch( RemoteException )
{ // no registry reachable, create one
registry = LocateRegistry.createRegistry(yourRegistry);
server = registry.rebind( yourServer );
}Have fun,
wiedkla

SCM and CRM Multiple Clients in one system

Similar Messages

Maybe you are looking for