SCOT Faxing works. however notifications are received only on failure.

Hi All,
Tried everything. Probably one of you can help me.
WE have configured SAP and TOPCALL so that faxing is now working. However while faxes are going thru all right we notice that only on failure of a fax to go thru the sender gets a notification of failure. They now seem to think they need also a notification of success.
What i mean is if user XYZ sends a fax to a number, the moment a Fax goes thru, they would like to be notified.
At the SCOT level i can see that faxing is working and faxes are going thru successfully.
Can anyone help ?
Regards
Shirish Joshi
00966554906873

Hi,
have you solved your problem?
I think I have the same problem.
Customer sends fax to TopCall Server, and the status is 710 (send).
But normaly we will get status response, and the status is green.
What can I do?????
Regards,
Wolfgang

Similar Messages

Email notifications are the only thing NOT working!!!

Email notifications are the only thing NOT working!!! Everything is set up correctly. The form works and the person submitting gets a message, but I don't. I tried 3 different email addresses and still not working. Any real fix for this?

Hello:
Try resetting the PRAM.
Barry

IOS7 Bug: Why is that i can only making an call works from notification area without unlocking the Phone using the passcode

Hi,
After upgrading to iOS7, I was asked by the system to set an passcode.
When i try to swipe from the notification area, it navigates me to the passcode lock screen which is expected but the same behaviour is not shown for a call - when i swipe from my notification area for the missed call it allows me to make calls.
Is this a bug or expected behaviour? Why there is a different behaviour for different functionalities? Its just to confuse the users?

It sounds as if you only had one line with an upgrade available. So you can only upgrade one line. For you to upgrade as well, you will have to wait until your upgrade is available. You can check that at MyVerizon. That's just how it works. All carriers and phone brands are the same. I have to wait until February to upgrade. The only thing you can do to get the new iPhone, is add a new line. But then you're paying for a line you don't need.

[B560] Battery meter, wifi strength meter not working in notification area

This all started when I had my laptop on my lap, and the battery slipped out of place (one of the clips must have slid to unlock).
Battery meter, when hovered over, shows that laptop is "plugged in and charging" but shows a red X over the battery.
Wifi meter shows the blue "thinking" circle, when hovered over shows I am connected and have internet access.
Another thing that's not working is the screen brightness and volume meters that appear when unsing Fn+arrow keys (they still function, but the meters don't appear on the screen).
This is such a strange combination of problems, I have no clue what's going on. I've uninstalled and reinstalled the lenovo energy management drivers, with no luck.
EDIT: And now I'm getting this error when trying to reinstall lenovo energy management

Hi
Maybe this workaround would help you:
1) Open the Start menu, and type gpedit.msc in the search and press Enter.
2) UAC notification would appear, so click Enter.
3) Now you can set and manage the Local Group Policies
4) Open the all users and on the left side (pane), click on an expand User Configuration, Administrative Templates and Start Menu and Taskbar.
5) Search in right pane for Remove the battery meter and click on Edit.
6) to Enable the Power Icon - Select Disabled or Not Configured and click OK.
7) Now reboot the notebook
Good luck

Email notifications are not receiving soon...

Hi all,
I am sending notifications to the users.Some of the notifications are receiving early i.e within 2 minutes and some are taking more than 1hr time to reach.
The mail status in the wf_notifications is stuck to mail and it is taking time(1hr) to change its status.
Can anyone please tell me why it happens and what is the reason behind it and what i should do to send notifications early?
If i posted this in wrong discussion forum thenplz tell where to post the workflow related questions...
Thanks in advance..

Please upload the output of wfstatus for the problematic document .This report shows what are the activities performed by a workflow. refer:
NOTE.134960.1 Running WFSTATUS and WFRETRY For Oracle Purchasing Workflows

Notifications are not sent to some users, even after the status is green.

Hello
There are some notifications sent to many(4 to 5 users and i am one of them) users from the SAP system. And i can see in the SCOT transaction that the notifications are sent successfully to all the users. Status is Green(transmitted). But,the issue is that, Some users are getting the notifications and some(Incliding myself) are not.
The users who has mail id say for example [email protected] are getting the notifications within no time but some usres who has maild id like [email protected] are not getting the notifications even after a day.
There are two Nodes are active in the SCOT transaction, One is SMTP and other one is Dummy.
In the address area of the Node SMTP, around 11 users mail ids are maintained, which includes both type mail ids xxxxxxx@xyz and
[email protected]
And the * (star) is maintained in the address area of the Node Dummy.
Can you please give me some clue which can help me in resolving this issue.
Thanks for your time.
Chetan....

Hello Balaji,
Thanks for your inputs.
As i informed that, there are two nodes active in the SCOT transaction. Address area of the NODE A is already set as '*'. So, it was not possible for me to set the start * value in the address area of the NODE B. I dont think its possible to maintain * in Both the NODES.
In the Node A, we have maintained * and in the Node B we have maintained some users mail ids. Because, as this is Quality system we dont want everyone to get the notifications.
Thanks for your inputs.

App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

Users as other task owners are receiving 5 emails notification for the same task

users as other task owners are receiving 5 emails notification for the same task in Sharepoint 2010. I have tried to add a 5 minutes delay on the other task owners workflow with no luck.any suggestions? Thanks

The Book confuses me. I still think assignment delay and leveling resources are the same. Here is the explanation from the book for the three concepts.
" Project offers two types of delays:
Leveling delay. This type of delay applies to tasks; it pushes out the start date for the task and all its resource assignments. It’s meant specifically for remov-ing resource overallocations. With the Leveling Delay field, you can remove
all leveling delays by choosing Resource➝Level➝Clear Leveling.
Assignment delay. This type of delay applies to a single assignment within a task. Suppose you have a security consultant coming in to help lock down your site. However, your employees have prep work to do before the consultant can get started.
You can assign everyone to the same “Try hacking into office” task but delay the consultant’s assignment by 5 days. "
After a couple of pages;
" Leveling Resources
In Project 2010, you can level the entire project, tasks you select, or a single resource. By leveling several tasks that are all vying for the resource, or alternatively, leveling only the most in-demand resources, you can focus on the problematic
portions of your project. Project automatically chooses popular settings in the Resource Level-ing dialog box. In most situations, you might as well run Resource Leveling with these settings. You can undo the leveling if you don’t like the results, but you
can get some clues from the initial results to help you determine the settings you need. Here’s how to level different parts of your project using the leveling settings cur-rently in place:
Level a resource. Select the resource you want to level, and then choose Resource➝Level➝Level Resource"

My Laserjet Pro 400 will fax only the top on third of the fax page but I can receive full faxes.

My Laserjet Pro 400 will fax only the top on third of the fax page but I can receive full faxes. But the system works with my older HP Fax Printer. Thank you.

Hi @ 
I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Laserjet Pro 400 Printer is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to view the Printing and Digital Imaging. When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
You may find the HP LaserJet Pro 400 Printer support page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Push notifications are not working Nokia Lumia 635

Please someone help me!! None of the notifications on my Nokia Lumia 635 are not working, the only ones that are, are sms and call, other than that the notifications for the social media apps are not working, like Facebook, Messenger, Kik, and Instagram, etc... I'm connected to the wifi and my notifications are on for those apps. PPPLEASE HELP

Hi nokia. I'm experiencing the same problem as ,@charmlo except my notification+actions show that they are active, and that Im supposed to be recieving notifications, but I don't receive them. I'll have to open the app before I actually receive any notifications. I made sure my time settings are up date, and my apps are updated. What do I do?
Attachments:
wp_ss_20141124_0001.png ‏81 KB
wp_ss_20141124_0002.png ‏56 KB

...notifications are a paid only feature, they are not available with a free account...

Hi Support-Team,
is there a chance to change this:
"... notifications are a paid only feature, they are not available with a free account ..."
If we can't send a notification to an other user FormsCentral doesn't make sence and will cancel the account... That would be a pity, because otherwise everything would work very well.
Kind regards
Andreas

Hi;
Thanks for your feedback, but notifications are a paid feature and are not available in a free account. That isn't likely to change. Hopefully there is enough value in this and the other features of a paid account for you to consider an upgrade.
Thanks,
Josh

TS2755 Receiving "Message Send Failure" notification, but messages are going through?

For the past few days, I have been receiving a "Message Send Failure" after every iMessage that I send. The messages are going through, but I still receive the notification every time. I have restarted my phone, signed out of and back into iMessage, and reset my network settings. Nothing seems to be working. Anyone have a solution? I'm having the same problem on my iPad, which leads me to believe it's a problem with iMessage at large as opposed to a device problem. Thanks!

If you have others that are receiving your imessaging but not the group you are attempting to send to then do this:
Click on your text messaging area using imessaging enabled and then type a message to yourself. Do this test to verify that your imessaging apple server is working properly. IF you get the messsage back to you in BLUE this indicates to you that both the outgoing and incoming text messaging is working as imessaging. With this piece of information verified that will indicate there are connectivity issues with individuals or all that are a part of the group you are attempting to contact. Please do not conclude that at a point in time this communication worked via imessaging that there may be some in the group that are now having conectiviity issues of their own.
Good luck, Friend.

My notifications are not working

just got my new 5th gen. ipod touch today and none of my notifications are working for any of my messaging apps. has anyone else had this issue??
any questions just let me know.
ive tried turning it off and on and restoring altogether... idk what else to try.

Me too! I only noticed as we are in a fire prone area and my "FireReady" app wasn't sending notifcations. Then I realised that NBA/Twitter etc were not working either. Notification centre has them all active and on with sound. ISP hasn't changed. Have tried Reset and turnig select ones on and off. Sounded like a glitch - wanted to avoid doing a Restore ....
AND then went to SETTINGS/Mail,Contacts,Calenders - Fetch New Data and found it was set to Manual - changed to Hourly and Bam! NYTImes Notification came through. Will monitor now and advise ....

Email push notifications are not working.

I'm running os 5.0.1 on a iPod Touch 4. Push notifications are not working for email.
The only way to check emails is to go into the email app and check for updates.
I deleted my email accounts and reloaded them.
I removed all active apps and restarted my iPod and still does not work.
Fetch New Data is set to Push.
I hear a lot of problems with this but is anything beiing done?
Why would this all of a sudden stop working?

Your welcome, nice it's working now

IMessage send is not working on my ipad2. I can receive only.

iMessage send is not working on my ipad2. I can receive only.

make sure you are typing your message in the line BELOW the line with the camera icon, soon as you type in that location the send button will become active.
Regards, Ct

SCOT Faxing works. however notifications are received only on failure.

Similar Messages

Maybe you are looking for