Script for effects in PE6, thumbnail do not appear in pannel

Hello. In the past, I had create script in Photoshop and copy it to Elements 6, without any problem.
I was making another script, and now I am not able to see the thumbnail in the pannel of the effects, even if I close and open PE6, close and open my computer.
I was at the end of ressource of finding what was the problem. So I desinstall PE6, and re-install it.
Well, now all the script that I had created before and that were working fine, has dissapear too !!!
Here is the procedure that I did for my script and to load it into PE6.
1. Creating a script into Photoshop CS2
2. Save the script (*.atn file ) into this root:
c/document and setting/all user/application data/adobe/photoshop elements/6.0/photo creations/photo effects
3. Create a thumbnail of 64px x 64px into Elements, save it into a *.png file, in the same root.
4. The *atn file and the *png file were saved with the exact same name as:
Largeur800px.atn
Largeur800px.png
Can someone help me with this problem ?
Thanks

Thanks to Mr Richard Lynch website: http://hiddenelements.com/elements6_actions.php
Find the solution in no. 5 and 6 of 'Installing the file' paragraph.

Similar Messages

My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

It's not clear whether you were able to do any backups to this drive at all. If not, it's probably not formatted properly. See #5 in Time Machine - Frequently Asked Questions for instructions.
If you did get any successful backups, there may be a problem with the drive, or the backups may be corrupted. Try to repair the backups, per #A5 in Time Machine - Troubleshooting.

Thumbnail does not appear for eps file

Hi,
I am working with IBR and when i check-in an .eps file, the thumbnail is not created.It is configured at the Administration -> File formats also. Thumbnail is getting created for other images like jpeg,gif,png etc. .eps shows the status as "Not Converted".
Please assist.

Hi Priyanka ,
How are you creating thumbnails ? Using UCM server itself or through IBR ?
Thanks,
Srinath

CS3 action script 2.0: compiled clip components do not appear in the component panel

Hi,
I have a FLA file containing 3 compiled clip components.
I use a MXP file to copy this file to the components panel,
this works fine when using Macromedia Flash 8 or Macromedia MX
2004, but when using CS# the components do not appear in the
components panel, only if a use regular component or SWC component
it appears in the panel, any reason why?any ideas?
Thanks
Maya

I can use this code from html. I'm able to say where the swf
and xml file are. I just don't know how to do this using action
script.
<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,0,0"
width="768" height="576" id="tech" align="middle">
<param name="movie"
value="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
/>
<param name="quality" value="high" />
<embed
src="slideshow.swf?xml_path=musicbox_slideshow/slideshow.xml"
quality="high" width="768" height="576" name="tech" align="middle"
allowScriptAccess="sameDomain" type="application/x-shockwave-flash"
pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>.

Thumbnails do not appear with XI

All the new pdf's that I have created from my Canon DR-M160 scanner do not have thumbnails using XI
The pdf's had thumbnails when using X.
I am probably explaining this poorly.
But I got thumbnails from scanned documents yesterday under X.
Today, after installing XI I don't get thumbnails, only icons.

Update.
I tried printing from a Word docx to create a pdf.
Strangly, Adobe did not appear as a printer selection.
Very strange because it was there before I upgraded to XI.
I don't know what really happened, but I was dragging and dropping .docx files and .xlsx files onto the Adobe icon on my desktop.
I got an error message.
BUT eventually Windows popped up with a dialogue box that looked like it was installing something related to a printer.
Then in .docx and .xlsx Adobe APPEARED as a printer option.
I then printed docx and xlsx files and the thumbnails appeared VERY NICELY.
So, I scanned a document and the thumbnail appeared very nicely as well.
That is the best I know how to explain it.
Final resuls is satisfactory.
I get pdf thumbnails from scanned documents and from docx and xlsx documents printed to the Adobe printer.

Can anyone help me - when I open itunes for some reason TV shows does not appear anymore?

Can anyone help me - when I open itunes for some reason TV shows no longer appears?

Go to iTunes prefs>General - make sure the box is ticked for TV Shows.
MJ

NEF thumbnails will not appear in CS3 Bridge

My XP machine crashed and I was forced to get a Vista machine. Vista 64 bit 7gb RAM and 640GB HD.
I downloaded the latest ACR 4.6 and that allowed me to see and edit NEF files in PS but in CS3 Bridge I cannot see the thumbnails only the NEF icon. I can double click and the NEF file will open in PS and I can edit as usual. I have tried clearing the cache' in the "tools" and it will give me a flash of some of the NEF thumbnails but that is all just a split second flash. I can see the metadata information just no thumbnail preview. JPEG's are fine.
HELP!!!

Hi:
I was having the same problem with vista 64 bit, PS CS3, bridge v. 4.6, creating thumbnails for Canon 50D. Your suggestions above to purge not only the camera raw preferences cache but also the regular preferences cache did the trick! Even though I have 3GB set for cache, it must have filled up. The thumbnails created instantly.
I had already checked for multiples of the plug-in but that wasn't it. ONly after I purged the general program cache did the thumbnails appear.
I knew it had to be something arcane like that as I also have CS3 installed in Win XP 32 bit, with the 4.6 ACR, and it creates thumbnails without any problem!
So thanks very much, you solved my problem, and I'd tried a lot of different suggestions.
It is counterintuitive I think that the program gives you three different places, tools, ACR and Bridge preferences. No wonder people have problems sorting simple problems like this out

Chapter Markers with thumbnails do not appear on Share to DVD

I am using Final Cut Pro X 10.0.8 and am producing a DVD for a 1:58 minute dance recital. There are 2 acts and for each act I created seperate projects to make it easy to group the two camera content.    Each act has 25 - 30 performaces and using the Marker command I added a Chapter Maker at the start of each new song with a custom title.
Once I had both Acts created as two projects, I then created a Compond Clip for each and then created a new project called DVD Master and droped the two compond clips into the timeline.    I confirmed the chaptermarks and the names and thumnail locations are intact in both.
Next I go back to the project view - select the DVD Master Project and goto Share/DVD - The dialog shows both the settings and optiosn for a black or white menu and when I click on the Chapter I see a mini thumbnail that shows the menu but they are all labeled Chapter 1, 2, 3, etc no custom names.
I go ahead and render the DVD to a HD Image file, and when I launch the DVD play the disc plays fine but the chapter names do not show up, the chapter menu for that matter does not show, and on the player when I hit the forward button I jumps to Chapter 1, 2, 3 etc    - No names or thumbnails.
What do you think I am doing wrong here?

The chapter markers are "inside" each compound. When you place these compounds in a new project timeline, they do not automatically migrate or bubble up to the new project. You may get a clue to that by simply looking at the timeline: no markers are visible!
This may be confusing, since you are allowed to put chapter markers anywhere.
But in the end only the chapter markers that are placed directly in the timeline from which you export will be present in the dvd. Bottom line is: you have to place this markers in your final project timeline.
One other option is to not use compounds at all; instead copy and paste everything from each subproject directly to the master project. This way the markers will be at the top level of your project and they will work. The drawback, of course, is that you get a complex timeline without the neatness of hiding each part inside a compound.

Save for Web & Devices 2-up view not appearing side by side

Hi, I'm hoping someone can help me with this issue. In Photoshop CS4, when I used to go to the Save for Web & Devices screen, I liked using the 2-up view so I could see the difference between my original and the optimized versions. However, I've tried doing this in CS4 now and I remember seeing (in CS3 I believe) where the layout of the 2-up view was side by side (vertically) so you could have the original on the left and the optimized on the right. Now, in CS4, at least on my machine (mac OSX tiger), the 2-up view only displays the original and optimized horizontally (with the original on top and the optimized below). Is this a fixed layout for the 2-up view or can this be changed? Is this normal is something corrupted? I've looked everywhere for a button or setting to click (that I could think of) and have not been able to find a place where the layout setting can be changed. I know it's a very small issue for most people, but I really preferred viewing the two versions side by side vertically instead of one on top of the other. I'm assuming that this is just a setting somewhere that the user could change but I don't know - perhaps this interface update is new to CS4 and is not customizable?
Anyone have any information or solutions to this?

Thanks so much...that was so easy, but I don't think I would ever have found it!
It works now, I just resized the window and it's now side by side...funny how this was not described in the help file when I looked it up!
Thanks again.

A Sales Document for a Particular Sales Org. should not appear in VF04

Hi SD Gurus,
Please guide me in this scenario.
There is a Sales Document type ZNEW, for which the billing type is ZA.
Requirement: -
1. XXXX Sales Org. wants to bill ZNEW. I mean they create ZA from ZNEW.
2. YYYY Sales Org. doesn't want to bill ZNEW. I mean they DON'T create ZA from ZNEW
2a. They don't want to see ZNEW orders in VF04.
2b. They don't want to exclude ZA from VF04.
Is there any other way in which we can achieve the above requirements ?
My Solution: -
1. Putting a Billing Block for YYYY ZNEW orders only using USER_EXIT. But the problem with this is ZNEW orders still shows up in VF04.
2. Putting a Reason for Rejection for all the line items in YYYY ZNEW orders using USER_EXIT. This time ZNEW won't show up in VF04. As there are some reports running for Reason for Rejection, the report looks big.
3. I tried manually making YYYY ZNEW order complete in VBUK and VBUP. Still it shows up in VF04.
Please let me know if you have any suggestions on this. Your response is really appreciated.

Dear Uday Kumar Narayanappa ,
I think as a consultant you have the say in deciding how the things should be mapped in SAP than the USER.
I dont find any reason other than having the same user id being shared between multiple users (and hence variant cannot be used).
Anyways try this.
Make a Z program copying VF04 .
Give the Tcode which is agreeable for the users.
In that Z program , write a code NOT TO CONSIDER documents of type ZNEW.
Now limit the authorisation of this new program only to those users who doesnt not want to deal with ZNEW.
Hope it helps.
Thanks & Regards,
Hegal K Charles

MaxBcpThread default for Snapshot agent in SQL2012 does not appear to be 1

When I run the Vanilla Snapshot agent that was created with the publication I get multiple parallel threads in 2012. I did not get this when we ran R2 even though I was running concurrent. This was the best method to avoid blocking on our
production DB even though the Snapshot did take a lot longer to prepare. Avoiding blocking is important in our case.
So today in 2012, I had to add a MaxBcpThreads 1 to the params of the Snapshot agent job to get it back down to 1 BCP thread.
Anyone else found this problem? Or is it something else I'm missing
Thanks
...Ray
...Ray

Hi RayG,
The MaxBcpThreads property of the Snapshot Agent specifies the number of bulk copy operations that can be performed in parallel. By increasing this value, bulk copy operations can run faster, because they will be perform in parallel. However, if set this
property too high, it can results in some performance degradation, because SQL Server will have to spend extra time managing the extra threads. Usually MaxBcpThreads must have a value greater than 0 , and the default is 2 times the number of processors , up
to a maximum value of 8 which is calculated internally.
For improving snapshot delivery process by changing MaxBcpThreads, you can review the following articles.
http://blogs.msdn.com/b/sqlsakthi/archive/2011/08/08/maxbcpthread-parameter-for-snapshot-and-distribution-agent-in-sql-server-replication.aspx
http://blogs.msdn.com/b/repltalk/archive/2010/06/15/improve-snapshot-performance-by-changing-maxbcpthreads.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

AU effects plugins passed validation but not appearing in AU list

I have two au plugins that are not available to me for selection as inserts despite the fact that they are successful validations. The are IK's CSR and King Dubby: no problems with 10 others that have installed OK, such as UAD, Nomad Factory, Ohm Force, etc. Strange thing is that when I loaded and old arrangement that contained CSR, it was avalable (that was how I managed to authorize) but when i attempted to create a blank template by stripping all the settings in the old arrangement to create a 'blank' arrangement to use as a starting point, the CSR and King Dubby are no longer available from the au drop down list. So: they are there but not there...any ideas? I have tried all sorts of variations with rescanning au validation, repairing permissions, rebooting...to no avail...any insight would be appreciated. Having saif all this...I do love the new Pro 8

Some plugins have different input requirements.
For example, blockfish only has stereo inputs, so if you call up the plugin list on a mono, it's not there, but is there for stereo channels.
(Of course, Logic has a solution for this by option-clicking the plugin list to force stereo-only plugs no mon channels etc in the usual Logic way...)
But see whether those plugs are in the listing depending on whether it's a mono or stereo channel...

Thumbnails do not appear after import

Hi - I just tried to import photos from a card to iPhoto '09. After the import, I noticed that the thumbnails (and pictures) do not show up in the iPhoto screen. I checked the "originals" folder, and they did copy to there. I tried to "import" from the originals folder, but iPhoto said that the pictures were already in the library. Can anyone please tell me how to fix this?
FYI - my library and all originals are stored on an HP Mediasmart server. I have iPhoto pointed to the library on the server.
Thanks!

J M
Welcome to the Apple user to user assistance forums
What is the format of the HP Media server? Many people have had many problems when the iPhoto library is on a disk that is not formated Mac OS extended (journaled)
Did the import appear to go normally?
What does appear?
Also note that it is advised not to be going into the iPhoto library directly via the finder or via other programs
And iPhoto will not import photos from inside the iPhoto library (to do so would create duplicates)
LN

After Effects clone stamp tool cursor not appearing. It is not the caps lock. This is my first time using it.

Any ideas?

Instructions for using the Clone Stamp tool are here:
http://helpx.adobe.com/after-effects/using/paint-tools-brush-clone-stamp.html#clone_stamp_ tool

I have Mac OS X 10.6.8 and am trying to change a printer to black and white/gray scale. All the posts I find refer to a button for Paper Quality. This does not appear on my options. Just paper handling which does not have a function to change from colour.

I cannot change the printer settings on my MacBook Pro to gray scale from colour. there is no function for Paper quality, just paper handling. any suggestions greatly appreciated - as long as they work!!

Was the printer instance properly configured when created, so the print subsystem picked the correct PPD and knows of all the device's capabilities? If in doubt, erase and create anew so you can confirm that the printer maker/model/version is getting correctly identified. This may trigger Software Update to download & install a printer update. The menus available on the print dialog depend on what the OS knows the printer can do. For instance, this is what I get in Safari's print dialog when using an HP 2550Ln color laser at the office:

Script for effects in PE6, thumbnail do not appear in pannel

Similar Messages

Maybe you are looking for