SCRIPT STOP EP 04S

Hello colleagues,
I need a script the SAP. I need a console EP in system Windows.
Is possible a script stop/start console MMC SAP?
Regards.

HI Victor,
Well this is mostly an OS level question. You can either try with WMIC (Windows Management Interface Control) or something like autoit http://www.autoitscript.com/autoit3/index.shtml.
I am not sure, if this works, then let the community know!
cheers,
Shantanu

Similar Messages

Script stops automatically on windows server 2008, IE8 is not launched or it doesn't navigate

QTP 11.0 - Script stops automatically on windows server 2008, IE8 and works fine on other standalone machines having Windows 7. Pls advise. It is very weird, it suddenly stops launching IE8. Sometimes it launches IE8 but des not navigate from one step to another. I have scheduled it using a vbscript though windows scheduler. I tired to uninstall QTP, then reinstall, it works fine for first run but stops again.

To Wendy23,
Just for clarity, the Windows Server 2008 OS that I ran ROBOCOPY and XCOPY on was the non-R2 version. Microsoft might have fixed this issue in R2.
You'll probably need to logon as local Administrator or use an account belonging to the local Administrators group.
Also, open the Command Prompt using "Run as Administrator" (right-click on Command Prompt), then run the XCOPY and ROBOCOPY commands from within this prompt.
To answer G.Write, the storage is local hard disks.
Thanks, was a long time ago, I was having a problem with robocopy not copying permissions on a SAN, and was wondering if the SAN was the problem, but your method worked fine for me, thanks.

How to deal with "Script stopped responding" in general Part 3

OK, I have asked about this issue before, and am back because it won't go away.
First, I have tried resetting Firefox. Yesterday was the most recent time.
I have tried using add-on Script Blockers.
The Script Blocker program worked for a while. The problem is that the primary source of the script problems are Hotmail and Gmail, and I need to have these functioning and open. Plus it is not easy to determine what a script does before deciding to let it in.
So I'm going to start from the computer user perspective: Why does this happen at all?
I understand the need for scripts to be used for websites to function. What I don't understand is why my entire computer slows to a crawl, some programs get cut off entirely, and then I have to try to figure out what webpage is causing the problem...slowly. Even when I click the box to stop the script, my computer is still incredibly slow for an unreasonable amount of time. By unreasonable amount, I mean that it is so long that I can't even close Firefox within 5 minutes just to make it stop. By unreasonable amount, I mean I have actually just set my computer to restart so that Firefox will be forced closed and then cancel the restart when Firefox shuts down.
What can Hotmail, Gmail, or any other program be doing that is of sufficient importance that it can essentially take over the computer? Nothing that isn't critical to the functioning of the computer should have this power. There is nothing critical about a script on Hotmail while I'm not even using that should let it take over all of the computer's resources. I would rather have Hotmail crash and shut off than have it let a script take over my computer. I can click on my Hotmail start up button within seconds while a script that won't respond might take 15 minutes to deal with.
So can someone please explain to me why this system exists? Why isn't there a command that says "a script may use up this amount of processing power only" that allows a person to keep using their computer while the script futily whirls away? Why isn't there a way to have an automatic setting like "let a script try to run for X seconds and if it doesn't work just stop it"? Why doesn't a window pop-up on the computer screen regardless of where the script problem is to alert you what webpage is causing the problem instead of making the user guess?
There doesn't even seem to be much purpose to the scripts. If I stop a script that is not responding on Hotmail, I can still use Hotmail when the computer recovers. So why does this happen?
This system seems insane to me. Honestly, I don't understand why scripts are allowed to do this. Can someone at least help with an explanation of why this happens? Why there isn't a way to make it stop? In a world of apps it seems like something that would kill non-responding scripts after a brief time would be a winner. How did we reach this chokepoint in computer functioning and why haven't we figured out how to stop it?
Thank you for any help, whether it be fixing the problem or just explaining the purpose.

Hi auzziewog, a couple of thoughts on long pauses.
In some cases, this is caused by Firefox waiting on content from the server, or loading some content into a plugin. Other than blocking some extraneous content in pages and setting plugins to "Ask to Activate" (click-to-play) on the Add-ons page, this is a hard problem to solve.
If the problem is a script (the eventual appearance of the dialog suggests that possibility), please see the above reference post.
Perhaps it is a combination of those things, since scripts often run after some other elements are loaded...

How do I untick "Don't ask again" on Script Stopped Working

I started getting a pop up telling me something similar to "A script has stopped working, do you want to stop it or continue" with two buttons accordingly. Also there was a tick box saying "Don't show this again".
I got sick of it happening so regularly and having to tick the Continue button - well it didn't tell me which script had stopped working and I wanted to Firefox to keep working and have all my plugins to continue working so clicked the Continue button, it would be good to know which script is not working so that it might help find out what's wrong and why it's not working... it's like most things that go wrong on PCs, "There has been and error, ---- will now close" Tell us what the error is so that we can report it to the programmers and they can fix it !?!?!?!?!
Anyway, I ticked the "Don't ask again" and clicked Continue...
Now Firefox pauses for about 5 seconds and sometimes longer every so often, and occasionally I see what appears to be this warning dialogue box flicker onto the screen for a split second...!?
How do I untick this box so that I get the buttons back so that I can stop the script working and then I'll be more likely to find out what's making this script not work by some part of Firefox or a plugin then not working and tell someone about it, rather than making things slow down so much...
I didn't know I had all the plugins listed below installed, where do they come from as I don't remember telling the machine that I've got Netscape- which I haven't as far as I know...?!
== This happened ==
Not sure how often
== I ticked the box telling it not to tell me again and continue...

reset "dom.max_script_run_time" under about:config
http://support.mozilla.com/en-US/kb/warning+Unresponsive+script

Scripts stop working when extended with "additional features"

I have a couple of scripts that work fine in both Pro and Reader, but when I Save As -> Reader Extended PDF -> Enable Additional Features, they stop working (in both Pro and Reader). Other scripts in the same form continue to work just fine. I'm at a total loss, and so are my IT folks (who admittedly aren't exactly form/JS/Adobe experts...)
I've been fighting with this problem off and on for a week or so now, and I've tried a couple of different approaches - I'm a JS muddler, and I'm sure there are more effective ways to do what I want to do. But everything I try gives me a different problem . I'm going to try to separate out the different issues in different posts...but I'm getting pretty confused!
For what it's worth, the problem scripts are on the first and last master page, while the ones that work are on regular pages.
The goal is to reuse a partially filled-out form for several different phases of an approval process. Each version gets a different title, and an additional subform is visible during the 2nd, 3rd, and 4th phases.
Here's the overall workflow:
Phase 1
The form starts out with the Phase 1 title and with the additional subform "hidden."
A remote user fills out the form and returns it to the program coordinator.
Phase 2/3/4
The coordinator saves a copy of the form with a different name.
The coordinator checks a "For admin use only" checkbox to display a radio button group. Each option changes the title and sets the additional subform presence to "visible."
The coordinator unchecks the "For admin use only" checkbox to hide the radio buttons.
The title is in a text field. The scripts change the rawValue of the field for each option.
In this case, I have the following script in both the initialize and calculate events of the text box:
if (S_SelectTitle.S_Actions.RB_SelectTitle.rawValue == 2)
     this.rawValue = "Phase 2";
else if (S_SelectTitle.S_Actions.RB_SelectTitle.rawValue == 3)
     this.rawValue = "Phase 3";
else if (S_SelectTitle.S_Actions.RB_SelectTitle.rawValue == 4)
     this.rawValue = "Phase 4";
else
     this.rawValue = "Phase 1";
and similar code in the initialize and calcuate events of the subform to make its presence "visible" or "hidden." (I've used this initialize/calculate event strategy before, it's always worked fine. But I"ve run into problems with it in one of the alternate approaches i've been using on this form, so I"m totally open to other ways of doing it...)
Before I extend the form for Reader, it works fine. The title changes correctly depending on which button is selected, the new subform appears at the end, and the radio buttons go away when the box is unchecked.
After I extend it for Reader, nothing works except the checkbox. The title doesn't change, and the subform never appears.
Help? Thanks in advance!

Well, it seems that interactive objects on master pages are problematic. Using a few message boxes, we discovered that the Initialize event fires each time a radio button on a master page is selected, but not when the radio button is in the body of the form.
So each time we clicked the radio button on the master page, the Initialize event set the value of the exclusion group right back to the default value (which was null, in this case). So the title never changed, because the radio button setting didn't stick.
For this form, I figured out a way to remove the radio buttons from the master page. Not only do the titles in the headers change correctly, the form also works with the Reader extensions enabled!
I'm not sure which issue was hanging me up -- the buttons on the master page or Reader extensions -- or if they're tied together somehow. But the moral of the story for me, anyhow, is no more buttons on master pages. Hope this helps someone else!

I am trying to create a PDF document that calculates Gains and Losses in Mutual Funds. The calculation scripts are repetitive from line to line. The scripts work well until I reach the line 32. Script stops calculating...

I am trying to create a PDF document that calculates Gains and Losses in Mutual Funds. The calculation scripts are repetitive from line to line. The scripts work well until I reach the line 32. Although I am using the same script as the fields above in the columm, the script eventually stops calculating and I can't figure out why. Is there a limit of how many calculation scripts you can enter? I will attempt to attach my pdf as soon as I figure out how. Thanks.

For e31 :
var e30 = +getField("e30").value ;
var c31 = +getField("c31").value ;
if ( (e30 !== 0) && (c31 !== 0) ) event.value = e30 + c31 ;
else event.value = "";
for e32 :
var e31 = +getField("e31").value ;
var c32 = +getField("c32").value ;
if ( (e31 !== 0) && (c32 !== 0) ) event.value = e31 + c32 ;
else event.value = "";
for e33 :
var e32 = +getField("e32").value ;
var c33 = +getField("c33").value ;
if ( (e32 !== 0) && (c33 !== 0) ) event.value = e32 + c33 ;
else event.value = "";
Java console doesn't show any error... That's why I am wondering if it's not a limitation issue... or memory issue, because they are maybe too many rows or something....
The c value is not calculated.

Why Scripts Stops Responding, Especially In E-Mail

I get quite frequently pop-up "Script not Responding" messages especially when I open my e-mail. I have the option to continue the scrip or stop the script.
I, also have problems downloading add 0ns to fireox. I always get the error code -203
How can I resolve these problems?

1. https://support.mozilla.com/en-US/kb/Warning%20Unresponsive%20script
2. http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203

Script in JavaScript does work properly on every web browser apart from Firefox (After FF update the script stopped working properly).

Hello,
script was always working correctly on every web browser. Unfortunately after (probably) last update Firefox stopped handling with it.
Script is the part of forum based on popular MyBB (http://www.mybb.com/). I put a screenshoot below, which should easily show how did the script work.
http://screenshooter.net/data/uploads/ug/tg/dyre.jpg
After clicking on any icon (e.g. bold "B") it shows "[undefined=undefined]" and then clicking shows no effects.
Errors from "WWW console" after icon clicking:
TypeError: mnu is undefined - line 641
TypeError: tag is undefined - line 1163
Here I posted problematic script:
http://pastebin.com/D8HmLEKK
Best regards!

See [[/questions/939971]]

Build Indexes Script Stopped After 20 Indexes. Is there a limit?

I created a script to build indexes for my database. I've run it several times and the scrip stops (is shown as cancelled) aftr 20 indexes are built. Is there a limit to the number of indexes available in a database for XE?

I created this file using an export from the database on another machine.
I then edited the export file to collect all the "create index" sql statements
into a single file.
I am running this file Index.sql using the XE SQL>SQL Scripts window,
clicking on the script file, and selecting Run.

Signature script stops until Acrobat is the frontmost application

OS X 10.5.1, Acrobat 8.1.2
I'm signing a document from another application by calling Acrobat with the shell scripting interface:
osascript -e 'tell application "Adobe Acrobat Professional"' \
-e 'do script file "path:to:file.js" as alias' \
-e 'end tell'
The Javascript code is straight from the SDK example. It hits the signature function, Acrobat beeps, and then bounces in the dock for attention. If you switch to Acrobat the script continues and finishes correctly. There is no dialog, alert, or anything in the console as to why it stops. The same script worked fine with Acrobat 7.

HI Victoria,
Go to ~/Library/Preferences and move the com.apple.finder.plist file to the Trash and see if that helps.
The tilde "~" character represents your home folder.
If that doesn't help...
I reinstalled SnowLeopard, have repaired permissions and restarted etc.
Boot from your install disc, run Disk Utility. The startup disk may need repairing.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space.*
Carolyn

Presence script stops working

Hello,
I have a multi-page dynamic PDF. Page 1 has a menu that allows you to hide the pages you do not want. There is a button to hide this menu. When the form opens the button works perfectly. However if I scroll to page 9 and use another button to add additional pages suddenly the button that only controls presence stops working completely.
The code (on mouse up) on the button on page 1 is:
if(employees.Page1.HideMenu.presence == "visible"){
employees.Page1.HideMenu.presence = "hidden";
else {
employees.Page1.HideMenu.presence = "visible";
(I tried a case statement also but the same thing happens).
The button that seems to break it has this code:
_InspireGroup.addInstance(1);
xfa.form.recalculate(1);
xfa.host.pageDown();
app.alert("You have jumped to the newly added Project Example page");
I can't figure out what the code on page 9 has to do with the code on page 1.
Can anyone help?

Hi,
The only thing I can think is that the addInstance is adding a continuation of Page1, so that there is now Page1[0] and Page1[1], so that the script doesn't know which Page1 is referenced in the script.
Try the javascript console to see if that is throwing up errors. Also maybe script out some of the lines in the addInstance script to see if that is cause the conflict, like the recalculate.
Otherwise would need to see a version of the form to see what is going on with the structure.
Good luck,
Niall

Apple script stops running program

Im am working on a project in apple script where basically you can talk to the computer in a way by pressing buttons for your response. But that is no the important part.... Whenever I try to run it it stops running at a certain point. Why is this?

At what point does it stop running?

Script stops when on twitter after 3 or 4 pages, how can I prevent this?

A script on this page may be busy, or it may have stopped responding.
Script: http://ajax.googleapis.com/ajax/libs/jquery/1.3.0/jquery.min.js:19

The display is the same as it was in Firefox 3.6
When "Enable" appears next to the plugin, that means that the plugin is currently Disabled and your only option, therefore, to to "Enable" it.
When "Disable" appears next to the plugin, that means that the plugin is currently Enabled and your only option, therefore, to to "Disable" it.
The same pattern is used on the Extensions, except there you also have "Options" and "Remove".

Google maps causes firefox to crash, I get script stop error message and every window freezes and then crashes

Hi, I use Google maps a lot everyday, and ever since this new firefox update and the new google update it cause firefox to crash. So I basically the the stop script message after window lags and doesnt load, and then it just shows me on all the firefox windows that are open "not responding". Basically I cant do any anything after that except end task everything or firefox just closes by it self. Please help out

unfortunately those sites don't help me. Here is a message I get, it only happens when I'm using Google maps in Firefox.
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: http://maps.gstatic.com/cat_js/intl/en_us/mapfiles/399b/maps2/%7Bmain,mod_util,mod_act,mod_act_s,mod_actbr,mod_appiw,mod_lt_j,mod_mssvt,mod_rst,mod_strr%7D.js:903

Shell script stop and start SAP

Hello,
Can you tell me the command to input username and password to login from shell script?
I just know this -
su - sidadm -c "stopsap"
But this just logs in using Username - sidadm.
how do modify this to add password also in command line?

There are tools to do exactly that without a password - it's called "sudo".
sudo is disabled by AIX team
The "other user" must have execute right too.
Since its just stopsap and startsap, they would be owned by sidadm only and executed by sidadm only through crontab
I am guessing you do not know the syntax to use password in comman line on shell script

SCRIPT STOP EP 04S

Similar Messages

Maybe you are looking for