Seeking CF Expert

Hi All
We are looking for ColdFusion expert to lead migration of few
sites to new server environment.
This is a short term gig with potential for longer term
support contract.
The tasks include:
1. Installation and configuration of ColdFusion 7.x on the
servers
2. installation and set-up of the sites on the servers
3. integration with MS SQL 2005
Optional Future Tasks:
1. Enhancements and changes to existing code
2. Maintenenace of the app server
The location for the initial phase is in NJ.
If anybody is interested or knows anyone who might be
interested, please forward resume to [email protected]
Thanks

Uh, take the dog with you!
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/
Fig Leaf Software is a Veteran-Owned Small Business (VOSB) on
GSA Schedule, and provides the highest caliber vendor-authorized
instruction at our training centers, online, or onsite.
Read this before you post:
http://forums.adobe.com/thread/607238

Similar Messages

  • How can i connect between WS−G5484 1000BASE−SX and GLC-LH-SMD ?

    Dear experts,
    My customer has 6509 A-side and B-side core switches and need to migrate only 6509 B-side to Nexus.
    I have some question below.
    1. Customer's 6509A-side has multiple WS−G5484 1000BASE−SX and WS−G5486 1000BASE−LX links and it is connected to 6509B-side.
    But customer bought only GLC-LH-SMD for Nexus migration of 6509B-side.
    I understood BLC-LH-SMD doesn't support SX type, so I am worndering how i can connect between 2 different module ?
    Or should i have GLC-SX-MMD for WS−G5484 1000BASE−SX links ?
    2. Current Rack has LC type patch pannel from B-side to Rack A side.
    But new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
    So If i want to connect from LC-type to Sc-type patch pannel, how can i connect ? do i have to use SC-LC converter ?
    3. Old 6509 links use many MMF cable, and new Nexus use SMF.
    Between same LX/LH links, if a side use MMF and another side use SMF, how can i connect each other ?
    Again new Nexus A-side rack is located at different row and between these rack, there is only sc-type patch pannel.
    Please let me know in detail, Thanks in advance, I really appreciate for your help.
    Jason.

    Hi Leo,
    Thanks of your reply.
    Dear Experts,
    I seek your expert's advice for another question urgently.
    Please make you time and share your experiecce.
    Thanks.
    Jason

  • What is my operating system in regards to my printer installation?

    When trying to install the drivers and software for your printer from the HP website, it is required to know both your operating system and your system type.
    To determine if you have Windows or Mac, below is the icon you will find that is often referred to as the Start Button.
             Windows  8                          Windows 7         Windows Vista            Windows XP             Mac OS X
    If you do not see either of these icons, then please review the owner's manual of your computer or find a section dedicated to product information or in the help section of the software/device you are using.
    Click here if you do not see your operating system listed under the driver section of your printer's support website.
    In earlier Windows versions:  Select the Start button icon and right-click on Computer (Win7 or Vista) or My Computer (XP) and left-click on "Properties" at the bottom of the gray pop-window.  Properties will display the Windows edition which contains information on which version of Windows you are using, the service pack, and further down you will find the system type which will indicate whether it is 32-bit or 64-bit.  If you do not see a version type, it is likely a 32-bit Windows XP.  
    *Note: Windows Starter Editions can cause problems and errors and thus limiting you to strictly a USB connection during the installation and continued use of the printer's software.
    In Windows 8: Right-click or tap and hold the lower left corner of the screen and then click or tap System in the menu.  Find System Type in the System Window, and then note whether your operating system is 32-bit or 64-bit.
    Click here to access the HP Support website regarding operating system types for more information.
    Mac OS X: For information regarding your OS version click on the Apple () to access the menu and choose "About This Mac" and you will be able to tell which version you are running which is essential for installing the proper printer software.
    Common Mac OS X have different names for their versions:
              10.5 - Leopard
              10.6 - Snow Leopard
              10.7 - Lion
              10.8 - Mountain Lion
    Each version before and after the ones listed above also have additional names.  Click here to access the Mac Support website for more information.
    Linux print drivers: HP has designed what is noted as HPLIP (HP Linux Imaging and Printing) software to include the driver, the toolbox, and the driver installer into one package.  This software is designed to work for nearly every Linux distribution available. Click here to download the latest HPLIP software for your printer.
    Be cautious about third-party websites offering downloads to certain HP software, especially if you are required to pay for it or pay for a tool to diagnose any issues you are having.  Most HP download packages include the scanning software such as HP Solution Center or HP Image Zone.  Specific software installed is not downloaded separately and therefor, if you cannot find it for free through the HP website, then be careful of what other companies are offering.  You are putting your system at risk by downloading any software from an unknown manufacturer such as viruses, malware, or other security factors.  Take precautions to protect yourself before you install any software from a third-party site.
    If you have any questions regarding any of the information above, feel free to post about it.  The HP Consumer Forum is a great place to look for expert advice regarding small to medium-sized printers (Officejet, Photosmart, Deskjet), along with how to install, update, or resolve other installation errors.
    If you have questions regarding a large commercial-sized printer, seek additional expert advice at the HP Enterprise Business Community regarding large LaserJets, ScanJets, and DesignJets.
    Lastly, if you just need a quick reference to a question regarding your printer or computer, click here for immediate access to your device's support website.
    Thank you for being a part of the HP family and community.  
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

    Your plugins list shows outdated plugin(s) with known security and stability risks.
    # Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    See http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)

  • Packaging material is not appearing in the Goods receipt of STPO

    Dear All,
    We are currently dealing one Roll-Out project for one multinational company. In that from sales side, one of the main processes defined is u201CStock Transport Purchase Order processu201D. As a regular process, outbound delivery document also created with ref to STPO.
    As per the client requirement the u201CPackaging materialu201D needs to be added as additional line item in the delivery to calculate the packaging cost. This packaging material is a "Stockable and Valuated" material. So while performing the PGI the stock will get reduced from SD side.
    The problem is, using this same STPO delivery document the Goods receipt is planned to do in the another side of company code. while doing the Goods receipt system is displaying only the "Finished Product" only. The packaging material is not displaying while doing the goods receipt in the another company code.
    due to this we are not able to complete our test cycle.
    so we need the expert opinion to solve this issue.
    if the packaging material is added as additional line item while doing Goods receipt then, the problem is solved.
    Kindly suggest us...
    Regards,
    MANI
    frWe have customized that also and now u201CPackaging materialu201D is adding as a new line item in the delivery document as a non valuated material.
    But the issue is, the Billing type u201CZICu201D is not getting determined while creation of billing if u201CPackaging materialu201D is added as a new line item. If u201CPackaging materialu201D is not added as a line item then, billing type is getting determined automatically without any issue.
    We have checked in LIKP table, its containing the billing type as u201CZICu2019. But if packaging material is added then, the billing type determination is not happening.
    We are assuming that some customizing needs to be done from MM/SD point of view. I am seeking the experts help regarding this issue to solve the problem.
    Regards,
    MANI

    Dear Friends,
              Thanks for the Feedback.
    Even though it is a associated company, in one company code the packaging material stock was reduced and packed for the STPO shipment.
    After receiving the consignment, in the receiving company code they will perform the goods receipt with ref to "Outbound Delivery" document.
    Since in the outbound delivery document "Packaging material" also available. So as a business strategy we are expecting the same "packaging material" also should available for goods receipt.
    I hope i have explained with max of my knowledge to clear your doubt.

  • Default Country Value while creating BP in Web UI

    Dear Experts,
    We are using  "BADI_CRM_BP_UIU_DEFAULTS" for enforcing certain values, including the country value (XX) for our case while creating new BPs in Web UI..
    As we are expanding internatinoally, the BP creation in the next country is also taking the same value (XX) which is not desired, since it is mentioned in the BADI. The said BADI works only for the Web UI and our users are on web UI too. Had the users been on GUI, the same could have been populated through the user profile - parameter id LND for the desired value. But the parameter id setting unfortunately doesnt work for Web UI.
    Neither is the table / field of the paramater id aval for calling up in this BADI.  Nor the tables associated with the BADI have any value as the BP is being created afresh.
    Hence we are stuck how to fill the respective country values by default. To my knowledge using the paramater ID should have been the simplest way of handling it but for Web UI it doesnt work.
    Seek your expert advice on the ways to resolve this please..
    Kind Regards,
    Tariq

    Hi Tariq,
    I'm not sure if you have the latest SP - recently, a new BADI - BUPA_SET_DEFAULT was released which allowed defaulting of fields in the BAPI and Web UI scenarios. You can use that BADI to default the fields for country, name, and even other address fields on the Web UI.
    If you don't have this BADI in your system, do search for SAP notes, which will also have the documentation about this.
    Hope this helps you.
    Regards,
    Rishu.

  • Error during Year-end closing Asset Accounting (AJAB)

    Hi,
    While executing transaction AJAB (year end closing AA) the system, the system issues a message "Transactions not completely periodically posted". The detailed message is AU075 "Asset balance sheet values not completely posted".
    Processing the error message:
    While proceeding through the error message details I checked "Define How Dep Areas Post to GL" and found that 4 depreciation areas are maintained as under:
    Area/Description/ G/L/ Target Group
    01/ Book dep/1 (Area posts in Realtime)/0L (Leading Ledger)
    15/Income tax dep/0 (Area does not post)/ Blank
    21/ IFRS/ 3 (Area posts dep only)/1F (IFRS Ledger)
    Then I clicked on start APC program, which leads to transaction ASKB (Periodic Asset Posting). The transaction could not be posted as document type is not assigned for periodic posting of Asset Values in SPRO>Fin. Accounting (New)>Asset Accounting>Integration with GL Accounting>Post APC values periodically to GL Accounting>Specify document type for periodic posting of asset values.
    I've got 2 queries:
    1) whether year-end closing can be executed if the document type is assigned and transaction ASKB is run.
    2) If the answer to first query is yes, how come the same error did not encounter in other company codes (the error occurred only in 2 company codes). I've also checked the depreciation area maintained in asset masters of the company code where no such problem was encountered and found it to be same as the company code where the problem has occurred.
    Seek your expert advise to resolve the issue.
    Thanks,
    Vipin Patankar

    Hi Malhar,
    Thanks for your prompt reply. I understand that the issue can be resolved by assigning document type and execute ASKB. At present document type 'AF' is being used for depreciation posting, can we use the same document type for APC value posting or some other document type should be used.
    I still need some more highlight on the reason for not facing the problem in other company codes.
    Thanks,
    Vipin Patankar

  • File Receiver Adapter FCC parameters

    Hi
    I have a File to File format via PI
    I have the following structure from the sender File adapter passing to receiver file adapter.
    The inbound structure as follow
    <CONTRACT>
    <HEADER>
        <X1>
        <X2>
    <LINE>
       <Y1>
       <Y2>
       <Y3>
    I have configured the FCC parameter at Receiver file adapter as follow
    HEADER.fieldseparator -    '0x09'
    LINE.fieldseparator  - '0x09'
    I can get Header and LINE items.
    But with mutiple records, I can only receive one record.
    I have tried a lot of combination based on the forum thread on this matter but to no avail
    I would like to seek your expert advice.
    Regards
    Fred

    The payload at the target adapter show only
    <Header>
    <Line>
    <Line>
    <Line>
    occurences is 1:unbounded
    I have also tried adding in Header.endSeparator - 'nl'
                                             Line.endSeparator - 'nl'
    but the output is still the same with one record.
    I have check the payload at Sender adapter CC
    and found it is coming as one record only
    though the source file has mulitple records.
    BTW, the source file structure is fixedlength with header indicator as H
    line indicator as L.
    Therefore I have set keyfield parameter in Sender adapter FCC as H and L

  • Industrial Machinery Manufacturing scenario

    Dear Sir,
    We are in the business of manufacturing the Industrial Machinery as per customer specific requirement . The multilevel BOM for the machine comprise of almost 1000 differnt components / assemblies . Some of the components are bought-out and some are manufactured in-house .
    We run the MRP  on the basis of engineering BOM and this result into several planned orders getting generated .
    The issue with our appraoch is that there are lot many Production Order getting generated and many of such production order require very small duration operation for producing their output  components  (eg  a keyway cut  in an input assigned forging) .
    We think that instead of having so many production orders , there should be a better practice so that numbers of production orders gets reduced .
    We seek the expert opinions from SAP Gurus as in such type of industry scenario what is the best procedure to be followed so that  organization working becomes the efficient one .
    With Thanks and Regards
    Sonia Agarwala

    Hi Sonia,
    What I understood from your query, I think you need to use Special procurement key '50 - Phantom assembly' for your requirement.
    Following are the links which will explain what is Phantom assembly, how it works and how it should be implemented.
    http://www.sap-img.com/production/what-exactly-is-a-phantom-item-or-assembly-means.htm
    http://help.sap.com/saphelp_470/helpdata/en/ca/72d91b941b11d1801200c04fadcb73/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/f4/7d2b5f44af11d182b40000e829fbfe/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/ea/e9b47a4c7211d189520000e829fbbd/content.htm
    Please go through it and if any futher assistance required, please revert.
    Regards,
    Hiren Ramani

  • This is the regular status of the memory of my macbook pro. Do you think I need a RAM upgrade?

    Hi there,
    I'm hoping to seek the expert views of the community here.
    I have a MacBook Pro, Late 2011, 17 inch. Running latest version of Mavericks. Speed seems to have slowed somewhat, perhaps since I upgraded to Mavericks, but not certain about that. Based on my research of the Apple communities, I suspect that I may benefit from a RAM upgrade.
    Attached are a few screen shots to assist:
    Based on what I have researched in the community, the fact that I have used 3.99GB of 4.00GB, and have used 5.63GB of Virtual memory, seems to suggest to me that I have well and truly maxed out my RAM. Also there is a high number of read ins/outs (but it had been a wheile since I last did a restart on the MBP (if that has any effect on these numbers here).
    I have also read that my model of MacBook Pro is upgradeable to 16GB of RAM (2 x 8GB).
    Thoughts and views from the community would be greatly appreciated. Will additional RAM help the speed and performance of my MacBook Pro?
    Many thanks.

    More RAM is always a Prudent move...
    Kerrod wrote:
    Will additional RAM help the speed and performance of my MacBook Pro?
    It will certainly help with Performance.
    Macs can be very Fussy about RAM...
    You can use these Links to check which RAM is suitable for your Mac...
    http://eshop.macsales.com/shop/apple/memory/
    http://www.crucial.com
    It is Important to get the Correct and Matching RAM
    Those sites also have videos on how to Install RAM should you need it....

  • Start up slow after a windows update

    I feel a little slow in windows start up in my notebook after a windows update, I have downloaded an install an update about 800mb but all components have not been installed successfully, again after one day back there was another update and it has installed successfully in complete.
    Is updating windows affect to slow down the PC performance?
    Seek your expert advices?
    Tnx.

    You have probably installed too many updates. Windows Update puts many files on the computer to update files. Follow these steps to remove some leftover files.
    1. Click Start.
    2. Search for "Disk Cleanup".
    3. Open Disk Cleanup
    4. Let it search for Windows Update Files. (I don't remember what the actual name is)
    5. Have it clean those files.
    You're done!

  • What program created this?..Flash perhaps?

    I stumbled across an amazing looking game "Drawn The Painted Tower"
    http://www.youtube.com/watch?v=5LRPTXWFqo4
    I'm in no way affiliated with this product, yet I'm very curious to learn what kind of program created it?
    I work in Maya, 3D max, and other various 3D programs, but this looks completely 2D..   Would this have been made entirely with Flash?
    I'm not too familiar with Flash, and thought I'd seek some expert opinions.
    Any insights?
    Thanks
    Jeff

    Very nicely done.  I think that could be done in any 3D program (non-photoreal rendering) with a bit of effects added with a compositing program.
    It could also be all done in PShop/AfterEffects if they have a great team of illustrators.

  • To go for SAP PS module or not to go?

    Hi All,
    There is a saying "better to be late than never". I Akash B.E(Mech.) though having extreme inclination towards software industry opted for industrial work 12years back and worked hard to retain there. But my urge towards computers is drawing me back to it. Having a strong experience of 12years of Projects, Good communication skills, logical & analytical skills, Interpersonal skill and hands on implementation experience in SAP (PS) (from customer's ends), I am thinking to build my career as a SAP PS consultant. I have following questions in mind:-
    Is it a right move?
    Whats the present demand for PS consultant?
    How should I proceed for it?
    Thanks
    Akash

    Hi Akash,
    Well I don't know how to react to this query. May be this is against SCN rules as you are providing your personal and professional details and seeking an experts advise to make your carrier. I don't know whether your question is meant to be answered at here at SCN or not. But since you have asked three questions. Following are my findings or suggestions.
    1. Is it a right move?
    As you said you have 12 years of strong experience in projects. It means you are more associated with real time projects scenarios. So Yes, It is a right move.
    2. Whats the present demand for PS consultant?
    Its not about demand of PS consultant. Every module of SAP has its own and unique importance and each and every aspect of SAP is demanding and challenging indeed.
    3. How should I proceed for it?
    I believe you are more of a field person who is associated with projects related activities but to incorporate your experience in SAP, then of course you need to learn SAP. To achieve this, better go for Certification Class room courses and groom yourself in SAP.
    I hope this may help you.
    Regards,
    Amit

  • JMS Request - Response Correlation Not Working

    Hello Experts -
    I am new to OAG and hence seek your expert advice. Following is our use-case scenario:
    1. OAG needs to push a sample XML Message to Weblogic Request JMS Queue. In the Request tab of "Routing to Messaging System filter" I set the CorrelationId
    2. In the response tab wait for a timeout (I set to 600000 secs)
    3. Retrieve Response from the Weblogic Response Queue
    4. Send the Response back to the client
    When i invoke the OAG policy, I am able to post the message to the Request Queue. For my testing purpose, I manually get the correlation id from the request message in the request queue and then populate the same in the response message correlation id field and post the same to the response queue.
    Unfortunately I am not able to see the response back. Below is the log.
    Any help is greatly appreciated.
    Thanks!
    Dibya
    DEBUG   29/Jan/2015:23:38:55.677 [3220]     handle type text/plain with factory class com.vordel.mime.Body$1
    DEBUG   29/Jan/2015:23:38:55.677 [3220]     Added converted message is added to the whiteboard
    DEBUG   29/Jan/2015:23:38:55.677 [3220] } = 1, filter [Request Message on Queue(Set Message)]
    DEBUG   29/Jan/2015:23:38:55.678 [3220] Filter [Request Message on Queue(Set Message)] completes in 1 milliseconds.
    DATA    29/Jan/2015:23:38:55.678 [3220] LogManager logging {
    DATA    29/Jan/2015:23:38:55.678 [3220]     Logging at Success
    DATA    29/Jan/2015:23:38:55.678 [3220]     Calling write log on class com.vordel.log.trace.TraceLogger
    DATA    29/Jan/2015:23:38:55.679 [3220] }
    DEBUG   29/Jan/2015:23:38:55.679 [3220] run filter [Place Message on Weblogic Queue (Messaging system)] {
    DEBUG   29/Jan/2015:23:38:55.893 [2300] start thread 10706770 in set "netsvc threadpool": count=11, busy=10, idle target=4, max=512
    DEBUG   29/Jan/2015:23:38:56.388 [3220]     Set Reply to on a named queue: TokenJMSModule!SMAIPO.ActiveSubscriptionResponse
    DEBUG   29/Jan/2015:23:38:56.389 [3220]     creating consumer from QueueSession
    DEBUG   29/Jan/2015:23:38:56.758 [3220]     cache com.vordel.circuit.jms.JMSProcessor$PoolContextCache@19c45da grows to 3
    DEBUG   29/Jan/2015:23:38:56.759 [3220]     JMSProcessor message ID is: Id-ef18cb542c01000000000000bcac40f9
    DEBUG   29/Jan/2015:23:38:56.760 [3220]     Creating JMS byte message using automime
    DEBUG   29/Jan/2015:23:38:56.760 [3220]     new buffered content factory 10674640
    DEBUG   29/Jan/2015:23:38:56.760 [3220]     buffered content 10674640, size=0/8
    DEBUG   29/Jan/2015:23:38:56.761 [3220]     [10674640] new chunk 10541538 from 10606CC8 to 10606DFE (310)
    DATA    29/Jan/2015:23:38:56.761 [3220]     new content stack 105488F8
    DATA    29/Jan/2015:23:38:56.761 [3220]     push source buffered onto 105488F8
    DEBUG   29/Jan/2015:23:38:56.761 [3220]     Setting reply to named queue
    DEBUG   29/Jan/2015:23:38:56.761 [3220]     setJMSMessageID: Id-ef18cb542c01000000000000bcac40f9
    DEBUG   29/Jan/2015:23:38:56.761 [3220]     setJMSCorrelationID: Id-ef18cb542c01000000000000bcac40f9
    DEBUG   29/Jan/2015:23:38:56.762 [3220]     Calling post JMS creation hook
    DEBUG   29/Jan/2015:23:38:56.762 [3220]     Post JMS creation hook completed
    DEBUG   29/Jan/2015:23:38:56.762 [3220]     Sending JMS message to TokenJMSModule!SMAIPO.ActiveSubscriptionRequest
    DATA    29/Jan/2015:23:38:57.120 [3220]     trace transaction
    DEBUG   29/Jan/2015:23:38:57.121 [3220]     Wait for repsonse ? true
    DEBUG   29/Jan/2015:23:38:57.819 [2300] incoming call on interface localhost:8085 from ::1:63317
    DEBUG   29/Jan/2015:23:38:57.820 [2300] new connection 02F0FB08,  settings source incoming interface (allow 1.1=no, idleTimeout=60000, activeTimeout=60000, contentLength: req=no, res=no)
    DEBUG   29/Jan/2015:23:38:57.820 [2300] push SSL protocol on to connection
    DATA    29/Jan/2015:23:38:57.820 [2300] [SSL_accept, 00006000] before/accept initialization.
    DEBUG   29/Jan/2015:23:38:57.821 [2300] No SSL host name provided, defaulting to certificate: { subject: /CN=instance-1 }.
    DATA    29/Jan/2015:23:38:57.821 [2300] [SSL_accept, 00002110] SSLv3 read client hello A.
    DATA    29/Jan/2015:23:38:57.821 [2300] [SSL_accept, 00002130] SSLv3 write server hello A.
    DATA    29/Jan/2015:23:38:57.823 [2300] [SSL_accept, 000021D0] SSLv3 write change cipher spec A.
    DATA    29/Jan/2015:23:38:57.823 [2300] [SSL_accept, 000021E0] SSLv3 write finished A.
    DATA    29/Jan/2015:23:38:57.823 [2300] [SSL_accept, 00002100] SSLv3 flush data.
    DATA    29/Jan/2015:23:38:57.824 [2300] [SSL_accept, 000021C0] SSLv3 read finished A.
    DEBUG   29/Jan/2015:23:38:57.825 [2300] negotiated SSL cipher "DHE-RSA-AES256-SHA", session 00000000 (reused) peer cert /CN=nodemanager-1
    DATA    29/Jan/2015:23:38:57.825 [2300] client certificate: { subject: /CN=nodemanager-1 }
    DEBUG   29/Jan/2015:23:38:57.826 [30a4] incoming call on interface localhost:8085 from 127.0.0.1:63320
    DATA    29/Jan/2015:23:38:57.826 [2300] rcv 979 from max of 2048: <GET /api/monitoring/metrics/summary?timeline=10m&metricGroupType=Service HTTP/1.1
    Host: localhost:8085
    Accept: application/json
    Accept-Language: en-US,en;q=0.8
    authentication.subject.id: admin
    authentication.subject.role: API Server Operator:API Service Developer:Policy Developer:API Service Administrator:API Server Administrator:Deployer:KPS Administrator
    Authorization: Basic YWRtaW46Y2hhbmdlbWU=
    Cookie: avlastvisit=1411930906; avlastactivity=0; __utma=125953885.1884274842.1414410173.1414410173.1417627152.2; __utmz=125953885.1417627152.2.2.utmcsr=google|utmccn=(organic)|utmcmd=organic|utmctr=(not%20provided); utag_main=_st:1417668298258$ses_id:1417666771075%3Bexp-session; WT_FPC=id=cfc9b752-08a3-4756-8d26-c4ca2d77219f:lv=1417670100029:ss=1417670100029
    Host: localhost:8085
    Referer: https://xx1211000592.global.avaya.com:8090/
    User-Agent: Gateway
    X-Requested-With: XMLHttpRequest
    Connection: close
    X-CorrelationID: Id-f118cb54e204000000000000373fba90 1

    Hi Michael,
    I think the adapter type is for the receiver channel looking at the documentation SAP Library - SAP Exchange Infrastructure
    Have you checked your receiver channel doesn't belong to a party?
    I havent tried this bridge with the http_aae but looks to be problematic according with Michal comment here http://scn.sap.com/community/pi-and-soa-middleware/blog/2014/01/28/generic-pi-async-sync-bridge-configuration-for-any-adapters#comment-454463
    Regards.

  • RCA for Oracle RAC Performance Issue

    Hi DBAs,
    I have setup a 2 node Oracle RAC 10.2.0.3 on Linux 4.5 (64 bit) with 16 GB memory and 4 dual core CPUs each. The database is serving a web application but unfortunately the system is at its knees. The performance is terrible. The storage is a EMC SAN but ASM is not implemented with a fear to further degrade the performance or not to complicate the system further.
    I am seeking the expert advises from some GURUs from this forums to formulate the action plan to do the root cause analysis to the system and database. Please advise me what tools I can use to gather the information about the Root Cause. AWR Report is not very helpful. The system stats with top, vmstat, iostat only show the high resource usage but difficult to find the reason. OEM has configured and very frequently report all kind of high wait events.
    How I can use effectively find Network bottle necks (netstat command which need to be really helpful to understand).
    How I can see the system I/O (iostats) which can provide me some useful information. I don't understand what sould be the baseline or optimal values to compare the I/O activities.
    I am seeking help and advised to diagnose the issue. I also want to represent this issue as a case study.
    Thanks
    -Samar-

    First of all, RAC is mainly suited for OLTP applications.
    Secondly, if your application is unscalable (it doesn't use bind variables and no SQL statements have been tuned and/or it has been ported from Sukkelserver 200<whatever>) running it against RAC will make things worse.
    Thirdly: RAC uses a chatty Interconnect. If you didn't configure the Interconnect properly,and/or are using slow Network cards (1 Gb is mandatory), and/or you are not using a 9k MTU on your 1 Gb NIC, this again will make things worse.
    You can't install RAC 'out of the box'. It won't perform! PERIOD.
    Fourthly: you might suffer from your 'application' connecting and disconnecting for every individual SQL statement and/or commit every individual INSERT or UPDATE.
    You need to address this.
    Using ADDM and/or AWR is compulsory for analysing the problem, and/or having read Cary Millsaps book on Optimizing Oracle performance is compulsory.
    You won't come anywhere without AWR and OS statistics will not provide any clue.
    Because, paraphrasing William Jefferson Clinton, former president of the US of A:
    It's the application, stupid.
    99 out of 100 cases. Trust me. All developers I know currently are 100 percent clueless.
    That said, if you can't be bothered to post the top 5 AWR events, and you aren't up to using AWR reports, maybe you should hire a consultant who can.
    Regards,
    Sybrand Bakker
    Senior Oracle DBA

  • Tuning advice needed. Any help is appreciated

    When I check on my DB health, I noticed this SQL statement below that is taking an awful long time to execute and sometimes causing a deadlock. I had asked my vendor but they have yet to reply. So I am seeking any expert advice here on how the query can be written in a better way.
    SELECT DISTINCT VO.VESSEL_CODE, '2' AS APPROVAL_TYPE, 'RFQFSA' AS MODULE_NAME, '' AS APPROVAL_BY, P.PO_ITEM_ID, '' as INV_ITEM_ID,
    P.PO_CODE '-' + CONVERT(VARCHAR, P.REST_NO) + ' ' + P.PO_DESCRIPTION AS DESCRIPTION, V.VESSEL_ID,+
    +'<Quotation><ItemId>'+ P.PO_ITEM_ID +'</ItemId><ReqItemCode>' + P.PO_CODE + '-' + CONVERT(VARCHAR, P.REST_NO) + '</ReqItemCode><ItemCode>' + P.PO_CODE + '-' + CONVERT(VARCHAR, P.REST_NO) + '</ItemCode><ReqPort>' + ISNULL(P.PO_DESTPORTCODE,'') + '</ReqPort><ReqPortDescription>' + ISNULL(PORT.PORT_DESCRIPTION,'') + '</ReqPortDescription><POStatus>' + P.POSTATUS_ID + '</POStatus><OAQuoStatus>' + '10' + '</OAQuoStatus></Quotation>' AS KEY_VALUE,+
    V.VESSEL_NAME
    FROM BP.BASS_POHEAD P
    LEFT JOIN DBO.BASS_REG_PORT PORT ON
    +(+
    P.PO_DESTPORTCODE = PORT.PORT_CODE
    +),+
    BP.BASS_POHEADSUPPLIER PS, DBO.BASS_VESSEL V, DBO.BASS_VESSEL_OWNER VO,
    +(+
    SELECT V.USERID, V.VESSEL_ID, V.VESSELTRX_ID
    FROM
    +(+
    SELECT U.USERID, U.OFFICE_CODE, U.APPROVAL_LEVEL, V.VESSEL_ID, V.VESSELTRX_ID
    FROM BP.BASS_OA_LEVEL L, BP.BASS_OA_USER U, BP.BASS_OA_VESSEL V
    WHERE L.ACTIVE_QUO = '1' AND U.OFFICE_CODE = L.OFFICE_CODE AND U.APPROVAL_LEVEL = L.LEVEL_CODE AND U.OFFICE_CODE = V.OFFICE_CODE
    AND U.APPROVAL_LEVEL = V.APPROVAL_LEVEL AND U.SEQ_KEY = V.APPROVAL_USER_SEQKEY AND (U.APPROVAL_LEVEL = 1 OR U.APPROVAL_LEVEL = 2) AND L.REC_DELETED = 0
    AND U.REC_DELETED = 0 AND V.REC_DELETED = 0
    +) V+
    +) W+
    WHERE P.VESSEL_ID = V.VESSEL_ID AND V.VESSELTRX_ID = VO.VESSELTRX_ID AND P.CATEGORY_ID = '2100' AND P.PO_ITEM_ID = PS.PO_ITEM_ID AND PS.OA_ADDRESS_STATUS_ID = '30'
    AND PS.REC_DELETED = 0 AND P.REC_DELETED = 0 AND VO.REC_DELETED = 0 AND V.REC_DELETED = 0 AND W.VESSEL_ID = V.VESSEL_ID AND W.VESSELTRX_ID = V.VESSELTRX_ID
    +AND W.USERID = [TAG1]+
    I wanted to check on the query plan, but I am having difficulty in my Oracle SQL Developer. The problem is being logged here: "Explain Plan" in Oracle SQL Developer is greyed out

    omnri wrote:
    Thanks Bravid. I would have thought that generally it's about the same. :(
    I'm afraid not. They are totally different in many ways. They have completely different implementation of so many things, from join methods to memory management, locking, transaction isolation levels...the list of differences is likely much bigger than the list of similarities.
    I will search for an official forum of MS SQL and post it there. If you know any good one off hand, please do let me know. Thanks!Only what's on google. I'd say the Microsoft one would be a good start
    social.msdn.microsoft.com/Forums/en/category/sqlserverCached - Similar
    or a few others
    www.sqlservercentral.com/Forums
    www.sqlteam.com/forums
    Best of luck.

Maybe you are looking for