Segmentation fault while updateing [SOLVED]

Hello all,
I got this probem a few days ago, trying to run 'pacman -syu' ends in a segmentation fault.
I have no clue what to do abou it..
I first tryed to update zlib manual as it was last in the list, worked fine. So i tryed wine and trying to update wine end in a segmentation fault.
I uninstalled wine and now i cant reinstall it.
Output from --debug
output 1: before i tryed anything
output 2: after installing zlib and removing wine
output 3: from when i try to install wine again.
output 1:
debug: config: attempting to read file /etc/pacman.conf
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: SyncFirst: pacman
debug: config: architecture: x86_64
debug: config: new section 'core'
debug: registering sync database 'core'
debug: config file /etc/pacman.conf, line 64: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'core': [url]ftp://mirrors.kernel.org/archlinux/core/os/x86_64[/url]
debug: setlibpaths() called
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'extra'
debug: registering sync database 'extra'
debug: config file /etc/pacman.conf, line 67: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'extra': [url]ftp://mirrors.kernel.org/archlinux/extra/os/x86_64[/url]
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'community'
debug: registering sync database 'community'
debug: config file /etc/pacman.conf, line 73: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'community': [url]ftp://mirrors.kernel.org/archlinux/community/os/x86_64[/url]
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'multilib'
debug: registering sync database 'multilib'
debug: config file /etc/pacman.conf, line 79: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'multilib': [url]ftp://mirrors.kernel.org/archlinux/multilib/os/x86_64[/url]
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'archlinuxfr'
debug: registering sync database 'archlinuxfr'
debug: adding new server URL to database 'archlinuxfr': [url]http://repo.archlinux.fr/x86_64[/url]
debug: config: finished parsing /etc/pacman.conf
debug: registering local database
:: Synchronizing package databases...
debug: destfile found, using mtime only
debug: using 'core.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292198641 local_time: 1292198641 compare: 0
debug: ust.size: 36849 local_size: 36849 compare: 0
debug: files are identical, skipping core.db.tar.gz
core is up to date
debug: destfile found, using mtime only
debug: using 'extra.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292277403 local_time: 1292277403 compare: 0
debug: ust.size: 462732 local_size: 462732 compare: 0
debug: files are identical, skipping extra.db.tar.gz
extra is up to date
debug: destfile found, using mtime only
debug: using 'community.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292269249 local_time: 1292269249 compare: 0
debug: ust.size: 410459 local_size: 410459 compare: 0
debug: files are identical, skipping community.db.tar.gz
community is up to date
debug: destfile found, using mtime only
debug: using 'multilib.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292018227 local_time: 1292018227 compare: 0
debug: ust.size: 23111 local_size: 23111 compare: 0
debug: files are identical, skipping multilib.db.tar.gz
multilib is up to date
debug: destfile found, using mtime only
debug: using 'archlinuxfr.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292246820 local_time: 1292246820 compare: 0
debug: ust.size: 24155 local_size: 24155 compare: 0
debug: files are identical, skipping archlinuxfr.db.tar.gz
archlinuxfr is up to date
debug: loading package cache for repository 'local'
debug: database path for tree local set to /var/lib/pacman/local/
debug: loading package cache for repository 'core'
debug: database path for tree core set to /var/lib/pacman/sync/core/
:: Starting full system upgrade...
debug: checking for package upgrades
debug: loading package cache for repository 'extra'
debug: database path for tree extra set to /var/lib/pacman/sync/extra/
debug: loading package cache for repository 'community'
debug: database path for tree community set to /var/lib/pacman/sync/community/
debug: loading package cache for repository 'multilib'
debug: database path for tree multilib set to /var/lib/pacman/sync/multilib/
debug: loading package cache for repository 'archlinuxfr'
debug: database path for tree archlinuxfr set to /var/lib/pacman/sync/archlinuxfr/
debug: new version of 'dhcpcd' found (5.2.8-1 => 5.2.9-1)
debug: adding package dhcpcd-5.2.9-1 to the transaction targets
debug: new version of 'diffutils' found (3.0-1 => 3.0-2)
debug: adding package diffutils-3.0-2 to the transaction targets
debug: new version of 'fluidsynth' found (1.1.3-1 => 1.1.3-2)
debug: adding package fluidsynth-1.1.3-2 to the transaction targets
debug: new version of 'heimdal' found (1.3.3-3 => 1.3.3-4)
debug: adding package heimdal-1.3.3-4 to the transaction targets
debug: new version of 'kernel26' found (2.6.36.1-3 => 2.6.36.2-1)
debug: adding package kernel26-2.6.36.2-1 to the transaction targets
debug: new version of 'kernel26-headers' found (2.6.36.1-3 => 2.6.36.2-1)
debug: adding package kernel26-headers-2.6.36.2-1 to the transaction targets
debug: new version of 'libdrm' found (2.4.22-1 => 2.4.22-3)
debug: adding package libdrm-2.4.22-3 to the transaction targets
debug: new version of 'man-pages' found (3.31-1 => 3.32-1)
debug: adding package man-pages-3.32-1 to the transaction targets
debug: new version of 'mesa' found (7.9-1 => 7.9.0.git20101207-2)
debug: adding package mesa-7.9.0.git20101207-2 to the transaction targets
debug: new version of 'raptor' found (1.4.21-1 => 1.4.21-2)
debug: adding package raptor-1.4.21-2 to the transaction targets
debug: new version of 'rasqal' found (0.9.20-1 => 0.9.21-1)
debug: adding package rasqal-0.9.21-1 to the transaction targets
debug: new version of 'redland' found (1.0.12-2 => 1.0.12-3)
debug: adding package redland-1.0.12-3 to the transaction targets
debug: new version of 'syslog-ng' found (3.1.2-1 => 3.2.1-1)
debug: adding package syslog-ng-3.2.1-1 to the transaction targets
debug: new version of 'telepathy-glib' found (0.12.5-1 => 0.12.6-1)
debug: adding package telepathy-glib-0.12.6-1 to the transaction targets
debug: new version of 'udev' found (164-2 => 164-3)
debug: adding package udev-164-3 to the transaction targets
debug: new version of 'usbutils' found (0.91-3 => 0.91-4)
debug: adding package usbutils-0.91-4 to the transaction targets
debug: new version of 'wine' found (1.3.8-1 => 1.3.9-1)
debug: adding package wine-1.3.9-1 to the transaction targets
debug: new version of 'zlib' found (1.2.5-2 => 1.2.5-3)
debug: adding package zlib-1.2.5-3 to the transaction targets
error: segmentation fault
Internal pacman error: Segmentation fault.
Please submit a full bug report with --debug if appropriate
Output 2:
debug: config: attempting to read file /etc/pacman.conf
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: SyncFirst: pacman
debug: config: architecture: x86_64
debug: config: new section 'core'
debug: registering sync database 'core'
debug: config file /etc/pacman.conf, line 64: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'core': [url]ftp://mirrors.kernel.org/archlinux/core/os/x86_64[/url]
debug: setlibpaths() called
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'extra'
debug: registering sync database 'extra'
debug: config file /etc/pacman.conf, line 67: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'extra': [url]ftp://mirrors.kernel.org/archlinux/extra/os/x86_64[/url]
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'community'
debug: registering sync database 'community'
debug: config file /etc/pacman.conf, line 73: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'community': [url]ftp://mirrors.kernel.org/archlinux/community/os/x86_64[/url]
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'multilib'
debug: registering sync database 'multilib'
debug: config file /etc/pacman.conf, line 79: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'multilib': [url]ftp://mirrors.kernel.org/archlinux/multilib/os/x86_64[/url]
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'archlinuxfr'
debug: registering sync database 'archlinuxfr'
debug: adding new server URL to database 'archlinuxfr': [url]http://repo.archlinux.fr/x86_64[/url]
debug: config: finished parsing /etc/pacman.conf
debug: registering local database
:: Synchronizing package databases...
debug: destfile found, using mtime only
debug: using 'core.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292198641 local_time: 1292198641 compare: 0
debug: ust.size: 36849 local_size: 36849 compare: 0
debug: files are identical, skipping core.db.tar.gz
core is up to date
debug: destfile found, using mtime only
debug: using 'extra.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292277403 local_time: 1292277403 compare: 0
debug: ust.size: 462732 local_size: 462732 compare: 0
debug: files are identical, skipping extra.db.tar.gz
extra is up to date
debug: destfile found, using mtime only
debug: using 'community.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292269249 local_time: 1292269249 compare: 0
debug: ust.size: 410459 local_size: 410459 compare: 0
debug: files are identical, skipping community.db.tar.gz
community is up to date
debug: destfile found, using mtime only
debug: using 'multilib.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292018227 local_time: 1292018227 compare: 0
debug: ust.size: 23111 local_size: 23111 compare: 0
debug: files are identical, skipping multilib.db.tar.gz
multilib is up to date
debug: destfile found, using mtime only
debug: using 'archlinuxfr.db.tar.gz' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
debug: ust.mtime: 1292246820 local_time: 1292246820 compare: 0
debug: ust.size: 24155 local_size: 24155 compare: 0
debug: files are identical, skipping archlinuxfr.db.tar.gz
archlinuxfr is up to date
debug: loading package cache for repository 'local'
debug: database path for tree local set to /var/lib/pacman/local/
debug: loading package cache for repository 'core'
debug: database path for tree core set to /var/lib/pacman/sync/core/
:: Starting full system upgrade...
debug: checking for package upgrades
debug: loading package cache for repository 'extra'
debug: database path for tree extra set to /var/lib/pacman/sync/extra/
debug: loading package cache for repository 'community'
debug: database path for tree community set to /var/lib/pacman/sync/community/
debug: loading package cache for repository 'multilib'
debug: database path for tree multilib set to /var/lib/pacman/sync/multilib/
debug: loading package cache for repository 'archlinuxfr'
debug: database path for tree archlinuxfr set to /var/lib/pacman/sync/archlinuxfr/
debug: new version of 'dhcpcd' found (5.2.8-1 => 5.2.9-1)
debug: adding package dhcpcd-5.2.9-1 to the transaction targets
debug: new version of 'diffutils' found (3.0-1 => 3.0-2)
debug: adding package diffutils-3.0-2 to the transaction targets
debug: new version of 'fluidsynth' found (1.1.3-1 => 1.1.3-2)
debug: adding package fluidsynth-1.1.3-2 to the transaction targets
debug: new version of 'heimdal' found (1.3.3-3 => 1.3.3-4)
debug: adding package heimdal-1.3.3-4 to the transaction targets
debug: new version of 'kernel26' found (2.6.36.1-3 => 2.6.36.2-1)
debug: adding package kernel26-2.6.36.2-1 to the transaction targets
debug: new version of 'kernel26-headers' found (2.6.36.1-3 => 2.6.36.2-1)
debug: adding package kernel26-headers-2.6.36.2-1 to the transaction targets
debug: new version of 'libdrm' found (2.4.22-1 => 2.4.22-3)
debug: adding package libdrm-2.4.22-3 to the transaction targets
debug: new version of 'man-pages' found (3.31-1 => 3.32-1)
debug: adding package man-pages-3.32-1 to the transaction targets
debug: new version of 'mesa' found (7.9-1 => 7.9.0.git20101207-2)
debug: adding package mesa-7.9.0.git20101207-2 to the transaction targets
debug: new version of 'raptor' found (1.4.21-1 => 1.4.21-2)
debug: adding package raptor-1.4.21-2 to the transaction targets
debug: new version of 'rasqal' found (0.9.20-1 => 0.9.21-1)
debug: adding package rasqal-0.9.21-1 to the transaction targets
debug: new version of 'redland' found (1.0.12-2 => 1.0.12-3)
debug: adding package redland-1.0.12-3 to the transaction targets
debug: new version of 'syslog-ng' found (3.1.2-1 => 3.2.1-1)
debug: adding package syslog-ng-3.2.1-1 to the transaction targets
debug: new version of 'telepathy-glib' found (0.12.5-1 => 0.12.6-1)
debug: adding package telepathy-glib-0.12.6-1 to the transaction targets
debug: new version of 'udev' found (164-2 => 164-3)
debug: adding package udev-164-3 to the transaction targets
debug: new version of 'usbutils' found (0.91-3 => 0.91-4)
debug: adding package usbutils-0.91-4 to the transaction targets
error: segmentation fault
Internal pacman error: Segmentation fault.
Please submit a full bug report with --debug if appropriate.
Output 3:
debug: config: attempting to read file /etc/pacman.conf
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: SyncFirst: pacman
debug: config: architecture: x86_64
debug: config: new section 'core'
debug: registering sync database 'core'
debug: config file /etc/pacman.conf, line 64: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'core': [url]ftp://mirrors.kernel.org/archlinux/core/os/x86_64[/url]
debug: setlibpaths() called
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'extra'
debug: registering sync database 'extra'
debug: config file /etc/pacman.conf, line 67: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'extra': [url]ftp://mirrors.kernel.org/archlinux/extra/os/x86_64[/url]
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'community'
debug: registering sync database 'community'
debug: config file /etc/pacman.conf, line 73: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'community': [url]ftp://mirrors.kernel.org/archlinux/community/os/x86_64[/url]
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'multilib'
debug: registering sync database 'multilib'
debug: config file /etc/pacman.conf, line 79: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'multilib': [url]ftp://mirrors.kernel.org/archlinux/multilib/os/x86_64[/url]
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'archlinuxfr'
debug: registering sync database 'archlinuxfr'
debug: adding new server URL to database 'archlinuxfr': [url]http://repo.archlinux.fr/x86_64[/url]
debug: config: finished parsing /etc/pacman.conf
debug: registering local database
debug: loading package cache for repository 'local'
debug: database path for tree local set to /var/lib/pacman/local/
debug: loading package cache for repository 'core'
debug: database path for tree core set to /var/lib/pacman/sync/core/
debug: loading package cache for repository 'extra'
debug: database path for tree extra set to /var/lib/pacman/sync/extra/
debug: loading package cache for repository 'community'
debug: database path for tree community set to /var/lib/pacman/sync/community/
debug: loading package cache for repository 'multilib'
debug: database path for tree multilib set to /var/lib/pacman/sync/multilib/
debug: adding package wine-1.3.9-1 to the transaction targets
error: segmentation fault
Internal pacman error: Segmentation fault.
Please submit a full bug report with --debug if appropriate.
Cheers
X
Last edited by Xenonn (2010-12-13 23:02:27)

skunktrader wrote:Perhaps the pacman cache is corrupted. Try pacman -Syyu
worked like a charm )
Thank you very much

Similar Messages

Segmentation fault while install Grid 11.2.0.3

Hi guys.
   I try to install a stand alone oracle Database 11.2.0.3 with ASM over a RedHat 6.4 x86_64 Vmware server.
Hardware
4 cores
32 GB RAM
Vmware server 5.1.0
Operating System
RedHat 6.4 x86_64, 2.6.32-358.6.2.el6.x86_64 (update today with yum update).
All needs packages installeds (i think so).
Vmware tools installed and updated.
Software
p10404530_112030 software packages.
Disk are mapping with udev/multipath, not ASM.
Installing steps.
1.- Execute enviroment shell.
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_SID=+ASM; export ORACLE_SID
ORACLE_HOME=/u01/app/11.2.0.3/grid; export ORACLE_HOME
PATH=$PATH:$ORACLE_HOME/bin:$BASE_PATH; export PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH
2.- Execute Grid runInstall
3.- Chose Configurarion Grid for Standalone server.
4.- ASM disk are founded, listed and selected.
5.- Requirement validator only warning pdksh package, but Redhat 6 has ksh package (and it's installed). So, i ignored that warning and continue.
6.- Install process start fine.
7.- Install process want executed root scripts
[root@oraclepruebas ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@oraclepruebas ~]# /u01/app/11.2.0.3/grid/root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /u01/app/11.2.0.3/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
   Copying dbhome to /usr/local/bin ...
   Copying oraenv to /usr/local/bin ...
   Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /u01/app/11.2.0.3/grid/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'oracle', privgrp 'oinstall'..
Operation successful.
LOCAL ONLY MODE
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Failure with signal 11 from command: /u01/app/11.2.0.3/grid/bin/crsctl pin css -n oraclepruebas
Pin node (/u01/app/11.2.0.3/grid/bin/crsctl pin css -n oraclepruebas) ... failed
So, if i execute crsctl command, i have a nice Segmentation fault error, but if i try to execute another grid command, everyting is fine.
[root@oraclepruebas oracle]# /u01/app/11.2.0.3/grid/bin/crsctl
Segmentation fault
[root@oraclepruebas oracle]#
[root@oraclepruebas oracle]# /u01/app/11.2.0.3/grid/bin/ocrcheck
Status of Oracle Cluster Registry is as follows :
         Version                  :          3
         Total space (kbytes)     :     262120
         Used space (kbytes)      :         92
         Available space (kbytes) :     262028
         ID                       : 756593197
         Device/File Name         : /u01/app/11.2.0.3/grid/cdata/localhost/local.ocr
                                    Device/File integrity check succeeded
                                    Device/File not configured
                                    Device/File not configured
                                    Device/File not configured
                                    Device/File not configured
         Cluster registry integrity check succeeded
         Logical corruption check succeeded
This is weird, because i has installed a RAC 11.2.0.3 databases and standalone databases (all with grid) over Vmware and RedHat 6.4 and works fine. I have even compared the rpm packages between a functionally installation with this server and matched all !!!.
I think that i am making a mistake, but i can't see it. I wan't reinstall or clone a funcionally virtual machine, because i want to learn with my mistake.
I has googled too much and i searched into metalink but i can't find something similar.
I apreciate your help, suggestions, anything.

I had similar issue while installing 32bit version by mistake. Just to checkyou have x86-64 in the filenames of oracle software distribution
p10404530_112030_Linux-x86-64_1of7.zip
p10404530_112030_Linux-x86-64_2of7.zip
p10404530_112030_Linux-x86-64_3of7.zip
Regards
Ed
http://erudans.blogspot.com

Segmentation Fault while installing on Solaris 9

Hi,
I was able to install Sun One Studio on Solaris 8 as root and was able to run it.
However I am trying to re-install it on Solaris 9 as a user with super user previlages.
I keep getting segmentation Fault when i run s1s5se-sol-sparc-en.bin
Any pointers?
thanks
Sri

Hi,
From the develpers.sun.com KB:
Installation
S1S5 : Segmentation Fault when running Solaris S1S5 Installer
Whenever i try to run the installer on a Solaris 9 machine as root I get Segmentation fault as follows-
root[(k)sh]@score1# ./s1s5se-sol-sparc-en.bin Segmentation Fault root[(k)sh]@score1#
Reason for Problem :-
The cause of this Segementation Fault problem is due to a directory read permissions problem. The installer could not be invoked because the user did not have read permission to a directory above the one containing the installer.

Brasero segmentation fault while selecting Plugins from menu

Hello,
Brasero is seg faulting for me when I select Plugins from the File menu. I am running a standard Gnome DE 3.12.2 with startx to login. When I launch brasero from terminal, it tells me:
[bryan@nas ~]$ brasero
(brasero:5300): GLib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
(brasero:5300): GLib-GObject-CRITICAL **: g_object_unref: assertion 'G_IS_OBJECT (object)' failed
and then once I click Plugins it says additionally:
(brasero:5300): GLib-GObject-CRITICAL **: g_type_instance_get_private: assertion 'instance != NULL && instance->g_class != NULL' failed
Segmentation fault
Brasero version is 3.11.3
Any ideas what causes this problem?
Pacman -Syu is done before posting this message...
Thanks

Upstream bug report: https://bugzilla.gnome.org/show_bug.cgi?id=728376

"Segmentation fault" while running code, how can I increase the stack size?

Hi, I only have very limited knowledge about c+ codes and compiling them and I would be very happy if someone can assist me.
My problem: I have two c++ codes, one with an array size of ~100,000, the other with ~1,500,000. When I compile them using terminal g++ -o commands, the smaller one works with no problem (it takes less than a minute to run), the larger one gives "Segmentation fault". I think it is a memory allocation problem and I am not an expert on dynamic memory allocation which I want to avoid for now.
My question: When I compile the large code in Windows Visual Basic, I can go to settings to increase the stack and heap sizes and it does work. Is there a similar thing in OS X Leopard? I found some commands to do that in the terminal window but I wasn't able to resolve my problem.
Thanks for all your help.

Thanks for the link, I actually looked for a developer discussion group but was not able to find it through the main discussion page. I reposted to my question there.

Segmentation Fault while starting weblogic server - Weblogic 6.0-6.1 on RedHat Linux

Hi, I have this problem with 6.0 and 6.1 : Can you help me please ?

Hi ,
I installed it on Debian 2.2R4 and it works fine so far.
I only had to tweak the name for a library.
Probably the SEG Fault comes from the "performance" pack.
Did you try to run without it?
What JVM are you using?
Dan
"Vincent Morello" <[email protected]> wrote in message
news:[email protected]..
Hi, I have this problem with 6.0 and 6.1 : Can you help me please ?

2.6.30 kernel + powernow-k8 gives modprobe segmentation fault at boot

Dear all,
hi there, that's another (Archlinux) forum newbie.
I've been running the 64 bit flavour of Archlinux flawlessy on my asus l5d (1st generation amd athlon 64 3000+, 768 mb ram) until the recent kernel version bump (2.6.29.4 => 2.6.30).
From there on my system is experiencing segmentation fault while loading powernow-k8. Here you have the relevant dmesg extract
processor ACPI_CPU:00: registered as cooling_device0
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores)
(version 2.20.00)
BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
IP: [<ffffffffa041451d>] powernowk8_cpu_init+0x364/0xad2 [powernow_k8]
PGD 2ee22067 PUD 2e8dc067 PMD 0
Oops: 0002 [#1] PREEMPT SMP
last sysfs file: /sys/module/snd_pcm_oss/initstate
CPU 0
Modules linked in: powernow_k8(+) freq_table processor vboxnetflt vboxdrv snd_se
q_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_intel8x0 snd_a
c97_codec snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundco
re ac97_bus slhc skge rtc_cmos rtc_core rtc_lib ext3 jbd mbcache ohci_hcd sr_mod
ehci_hcd cdrom sd_mod usbcore ata_generic pata_amd pata_acpi libata scsi_mod
Pid: 975, comm: modprobe Not tainted 2.6.30-ARCH #1 L5D
RIP: 0010:[<ffffffffa041451d>] [<ffffffffa041451d>] powernowk8_cpu_init+0x364/0
xad2 [powernow_k8]
RSP: 0018:ffff88002eec3cc8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88002eecd100 RCX: 0000000000000000
RDX: 0000000000000003 RSI: 00000000000c3500 RDI: 0000000000000012
RBP: ffff88002efe6300 R08: 0000000000000003 R09: ffff88002efe6600
R10: ffff88002ef032a0 R11: 0000000000000000 R12: ffff88002ebde640
R13: 0000000000000003 R14: ffff88002efe6340 R15: 0000000000000002
FS: 00007f00d10276f0(0000) GS:ffff88000100b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 000000000000001c CR3: 000000002ee62000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 975, threadinfo ffff88002eec2000, task ffff88002efab280)
Stack:
ffffffff807c1e60 000000000d58bd2a ffff88002eec3d28 ffffffff803bde0f
000000020000000e 000000000d58bd2a 000000000000e790 000000000d58bd2a
0000000000000000 0000000000000000 ffff88002eecd100 ffff880001016428
Call Trace:
[<ffffffff803bde0f>] ? vsnprintf+0x30f/0x5d0
[<ffffffff8048059d>] ? cpufreq_add_dev+0x1cd/0x690
[<ffffffff8054e8e8>] ? __mutex_lock_slowpath+0x238/0x340
[<ffffffff80461906>] ? sysdev_driver_register+0xb6/0x150
[<ffffffffa0414c8b>] ? powernowk8_init+0x0/0xca [powernow_k8]
[<ffffffff8047f3c4>] ? cpufreq_register_driver+0xa4/0x190
[<ffffffff8020907b>] ? do_one_initcall+0x4b/0x1b0
[<ffffffff802727a9>] ? __blocking_notifier_call_chain+0x79/0xc0
[<ffffffff80288680>] ? sys_init_module+0xd0/0x220
[<ffffffff8020c442>] ? system_call_fastpath+0x16/0x1b
Code: 49 8b 04 00 48 69 d0 e8 03 00 00 48 39 d1 74 23 69 d0 e8 03 00 00 48 c7 c7
b0 56 41 a0 31 c0 e8 2d 84 13 e0 48 8b 45 38 44 89 ea <c7> 44 d0 04 ff ff ff ff
41 83 c5 01 44 3b 6d 68 0f 82 0c ff ff
RIP [<ffffffffa041451d>] powernowk8_cpu_init+0x364/0xad2 [powernow_k8]
RSP <ffff88002eec3cc8>
CR2: 000000000000001c
---[ end trace 7086b00b1b998fa9 ]---
The system continues booting surprisingly well, but everything gets hotter and hotter (I used to have it running at 800 mhz to reduce fan activity, as I don't really need full speed).
I only wrote to know if anyone has got into similar troubles - I had a look over recent kernel ChangeLog and I've seen some activity about powernow-k8, but not really something
I might have thought would blow everything up. I'd like also to be pointed at custom patches someone may have come up with - I've no problem messing with kernel recompilation: if this doesn't get fixed in a new package, I'm thinking about reverting to 2.6.29.4 - or maybe some kernel parameters to cover the thing (at the moment and up until 2.6.29, II need "noapic nolapic").
Thank you in advance. Let me know if you need additional info.

I can confirm that powernow_k8 is broken somehow. I just got this when trying to change the governour. But I cannot reproduce it.
INFO: task kondemand/0:3657 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kondemand/0 D ffff88007e7992f0 0 3657 2
ffff88007e7992f0 0000000000000046 000000007ef643c0 ffffffff8023f294
ffffffff80826130 ffff88007ea2eb50 ffff88007e799590 00000000000111c0
000000000000cb68 ffff88007e799590 ffff88007be8fdd0 ffff8800010211c0
Call Trace:
[<ffffffff8023f294>] ? task_rq_lock+0x64/0xc0
[<ffffffff8054d9a9>] ? schedule+0x29/0x70
[<ffffffff80550525>] ? __down_write_nested+0x95/0xe0
[<ffffffff8048030b>] ? lock_policy_rwsem_write+0x5b/0xb0
[<ffffffffa0d8b8c9>] ? do_dbs_timer+0x69/0x370 [cpufreq_ondemand]
[<ffffffffa0d8b860>] ? do_dbs_timer+0x0/0x370 [cpufreq_ondemand]
[<ffffffff80266431>] ? worker_thread+0x161/0x300
[<ffffffff8026c6d0>] ? autoremove_wake_function+0x0/0x60
[<ffffffff802662d0>] ? worker_thread+0x0/0x300
[<ffffffff8026c0b4>] ? kthread+0x64/0xc0
[<ffffffff8024ae30>] ? schedule_tail+0x30/0x80
[<ffffffff8020d4fa>] ? child_rip+0xa/0x20
[<ffffffff8026c050>] ? kthread+0x0/0xc0
[<ffffffff8020d4f0>] ? child_rip+0x0/0x20
INFO: task cpufreq-set:14658 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
cpufreq-set D 000000007c9e91cb 0 14658 1
ffff88006a0bf1a0 0000000000000082 0000000000000000 ffff880040d6ed80
ffff88006a0bc570 ffff88007ee52c30 ffff88006a0bf440 00000000000111c0
000000000000cb68 ffff88006a0bf440 ffff88006a0c7740 ffff880040d6ed80
Call Trace:
[<ffffffff8054d2e7>] ? thread_return+0x4e/0x6e7
[<ffffffff80214d05>] ? sched_clock+0x5/0x10
[<ffffffff8054d9a9>] ? schedule+0x29/0x70
[<ffffffff8054df25>] ? schedule_timeout+0x1a5/0x1f0
[<ffffffff8054d9a9>] ? schedule+0x29/0x70
[<ffffffff8054df25>] ? schedule_timeout+0x1a5/0x1f0
[<ffffffff8054cd6d>] ? wait_for_common+0xdd/0x1b0
[<ffffffff802494d0>] ? default_wake_function+0x0/0x40
[<ffffffff80267210>] ? __cancel_work_timer+0x1c0/0x1d0
[<ffffffff80266b50>] ? wq_barrier_func+0x0/0x40
[<ffffffffa0d8bce7>] ? cpufreq_governor_dbs+0x117/0x37c [cpufreq_ondemand]
[<ffffffff803ba272>] ? __up_read+0x32/0xe0
[<ffffffff8047e5bc>] ? __cpufreq_governor+0xec/0x170
[<ffffffff8047f2be>] ? __cpufreq_set_policy+0x15e/0x1c0
[<ffffffff8047fb93>] ? store_scaling_governor+0x113/0x230
[<ffffffff80480c10>] ? handle_update+0x0/0x40
[<ffffffff8047fa80>] ? store_scaling_governor+0x0/0x230
[<ffffffff80480ad1>] ? store+0x71/0xc0
[<ffffffff8036b535>] ? sysfs_write_file+0xe5/0x190
[<ffffffff802fc204>] ? vfs_write+0xe4/0x1c0
[<ffffffff802fc3fe>] ? sys_write+0x5e/0xb0
[<ffffffff802f8f2b>] ? do_sys_open+0xdb/0x130
[<ffffffff8020c442>] ? system_call_fastpath+0x16/0x1b

HT1338 Macbook pro mac os 10.6.8 software update segment fault

I recently tried to update a few software on my macbook pro, but apparently software update crashed while it ran in the process.
So I cannot update any softwares since it won't work at all. I even tried to run softwareupdate on command line and it gave me
"segement fault". Any idea how to fix this problem?
In the Software logs:
Apr 11 11:38:00 Realfrees-MacBook-Pro com.apple.WindowServer[263]: Wed Apr 11 11:38:00 Realfrees-MacBook-Pro.local WindowServer[263] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Apr 11 11:38:00 Realfrees-MacBook-Pro WindowServer[263]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Apr 11 11:38:01 Realfrees-MacBook-Pro Software Update[272]: Looking for products to install
Apr 11 11:38:11 Realfrees-MacBook-Pro com.apple.launchd[1] ([0x0-0x21021].com.apple.SoftwareUpdate[272]): Job appears to have crashed: Segmentation fault
Apr 11 11:38:11 Realfrees-MacBook-Pro loginwindow[262]: DEAD_PROCESS: 262 console
Apr 11 11:38:11 Realfrees-MacBook-Pro UserEventAgent[267]: CGSShutdownServerConnections: Detaching application from window server
Apr 11 11:38:11 Realfrees-MacBook-Pro com.apple.UserEventAgent-LoginWindow[267]: Wed Apr 11 11:38:11 Realfrees-MacBook-Pro.local UserEventAgent[267] <Warning>: CGSShutdownServerConnections: Detaching application from window server
Apr 11 11:38:11 Realfrees-MacBook-Pro UserEventAgent[267]: CGSDisplayServerShutdown: Detaching display subsystem from window server
Apr 11 11:38:11 Realfrees-MacBook-Pro UserEventAgent[267]: XRHotKeyAgent:638 kCGErrorInvalidConnection
Apr 11 11:38:11 Realfrees-MacBook-Pro com.apple.UserEventAgent-LoginWindow[267]: Wed Apr 11 11:38:11 Realfrees-MacBook-Pro.local UserEventAgent[267] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
Apr 11 11:38:12 Realfrees-MacBook-Pro /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[279]: Login Window Application Started
Apr 11 11:38:13 Realfrees-MacBook-Pro com.apple.ReportCrash.Root[276]: 2012-04-11 11:38:13.055 ReportCrash[276:2903] Saved crash report for Software Update[272] version ??? (???) to /Library/Logs/DiagnosticReports/Software Update_2012-04-11-113813_localhost.crash
And crash reports:
Date/Time:       2012-04-11 11:32:56.409 +0900
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000bbadbeef
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   com.apple.JavaScriptCore        0x00007fff874dd7f9 JSC::Heap::makeUsableFromMultipleThreads() + 57
1   com.apple.JavaScriptCore        0x00007fff874dd2e4 JSGlobalContextCreateInGroup + 132
2   com.apple.installframework      0x00007fff810d2c93 IFJS_GlobalContextCreate + 32
3   com.apple.installframework      0x00007fff810cd986 -[PKDistributionController initWithDistribution:interfaceType:] + 310
4   ...le.SoftwareUpdate.framework 0x00007fff81124416 -[SUProduct distributionController] + 115
5   ...le.SoftwareUpdate.framework 0x00007fff8112bde9 -[SULocalProduct initWithProductKey:productPath:error:] + 401
6   ...le.SoftwareUpdate.framework 0x00007fff8112c85a -[SUProductManager localProductForProductKey:] + 96
7   ...le.SoftwareUpdate.framework 0x00007fff8112d90a -[SUProductManager allLocalProducts] + 258
8   ...le.SoftwareUpdate.framework 0x00007fff8112d559 -[SUProductManager(InstallAtLogout) _productForProductKey:] + 64
9   ...le.SoftwareUpdate.framework 0x00007fff8112d4ac -[SUProductManager(InstallAtLogout) productsToInstallAtLogout] + 236
10 com.apple.SoftwareUpdate        0x000000010000eeeb 0x100000000 + 61163
11 com.apple.Foundation            0x00007fff82380bc5 _nsnote_callback + 167
12 com.apple.CoreFoundation        0x00007fff83ec7000 __CFXNotificationPost + 1008
13 com.apple.CoreFoundation        0x00007fff83eb3578 _CFXNotificationPostNotification + 200
14 com.apple.Foundation            0x00007fff82377b26 -[NSNotificationCenter postNotificationName:object:userInfo:] + 101
15 com.apple.AppKit                0x00007fff8784144a -[NSApplication _postDidFinishNotification] + 100
16 com.apple.AppKit                0x00007fff8784137f -[NSApplication _sendFinishLaunchingNotification] + 66
17 com.apple.AppKit                0x00007fff8790c35d -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 219
18 com.apple.AppKit                0x00007fff8790bfd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
19 com.apple.Foundation            0x00007fff823af1c6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
20 com.apple.Foundation            0x00007fff823aeff6 _NSAppleEventManagerGenericHandler + 114
21 com.apple.AE                    0x00007fff844f732b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
22 com.apple.AE                    0x00007fff844f7224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
23 com.apple.AE                    0x00007fff844f712b aeProcessAppleEvent + 210
24 com.apple.HIToolbox             0x00007fff8707e619 AEProcessAppleEvent + 48
25 com.apple.AppKit                0x00007fff87811095 _DPSNextEvent + 1191
26 com.apple.AppKit                0x00007fff87810801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
27 com.apple.AppKit                0x00007fff877d668f -[NSApplication run] + 395
28 com.apple.AppKit                0x00007fff877cf3b0 NSApplicationMain + 364
29 com.apple.SoftwareUpdate        0x0000000100001cc8 0x100000000 + 7368

Greetings,
Download the combo update (don't install it yet): http://support.apple.com/kb/DL1400
SafeBoot your computer: http://support.apple.com/kb/HT1455
While in SafeBoot install the combo update
Restart the computer to come out of SafeBoot
Try running software update again and see if it works.
Hope that helps.

[Solved] pSX Segmentation Fault - [Partially Solved] pSX problems

Alright, I think that I've solved the segmentation fault thing that was happening in pSX whenever I ran it (I use Arch x86_64). I'm not sure what was wrong, but after installing lib32-intel-dri-7.11.2-2 via pacman pSX appeared to work fine. The only other problems I've encountered so far is that (1) installing one of the alsa plugin things (not sure which one since I was installing more than one at the time) seems to make it crash and stay crashed as long as the plugins are installed, (2) another problem was that when I try to load a savestate while running a loaded savestate of Final Fantasy 7 in pSX (I say FF7 because that's the only game I've tried playing so far) causes pSX to crash with a segmentation error, (3) and the last problem, which does happen to be the least important/crippling is that while pSX is running I keep getting a message displayed to xterm saying: "sound: underrun". That's pretty much it. So if any of you have been having trouble getting pSX to run on an x86_64 install of Arch/have been getting segmentation fault errors when you try to run pSX on Arch x86_64 just install lib32-intel-dri or the applicable alternative and it should hopefully work.
Last edited by Orodruin (2012-01-06 09:44:00)

I ran into this same problem after an upgrade on a Thinkpad T60 and this did fix the problem.
Thanks to Roxas for posting the solution.

[kinda solved!]nvidia-settings segmentation fault

hi
i use nvidia-settings to adjust my graphic card setup. I haven't used it in a while though (in fact, i think it was using kde about 8 months ago), and tried to fire it up today on openbox, this is what i get;
$ nvidia-settings
(nvidia-settings:6351): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
(nvidia-settings:6351): Gtk-WARNING **: Unable to locate theme engine in module_path: "murrine",
Segmentation fault
$
I have never installed murrine ever! is it as simple an issue to fix as install murrine??
i tried to pacman it & yaourt it, but its not found! before I go about finding the source code to compile, i was wondering if anyone else has any ideas?
thanks
Last edited by ninjaprawn (2009-02-01 02:40:17)

ghostHack wrote:
I find it a bit unlikely that a missing theme engine would cause a seg fault, however the package you need is in [community] and is called 'gtk-engine-murrine'.
What version of nvidia-utils do you have? and is the ret of your system up to date?
hi, thanks for that. I installed the theme engine, now the error message only says;
$ nvidia-settings
Segmentation Fault
$
I keep my system fully updated all the time, but how do i find out what version of nvidia-utils i am using??

[SOLVED] gdk-pixbuf-query-loaders Segmentation fault

When I update my packages via:
$ yaourt -Syu
I saw the error:
Segmentation fault (core dumped)
Then I found out the problem is about the binary file gdk-pixbuf-query-loaders.
When I run
gdk-pixbuf-query-loaders > /etc/gtk-2.0/gdk-pixbuf.loaders
I get the error
Segmentation fault (core dumped)
Is this a bug or did I do something wrong?
The file /usr/bin/gdk-pixbuf-query-loaders is owned by package gdk-pixbuf2 (2.31.3-1), I tried compiling the package from source myself, that didn't solve the issue.
I am using kde (new plasma).
Last edited by th0th (2015-05-10 11:36:42)

brebs wrote:
Sounds like Nvidia bug report.
Have you recompiled cairo with --enable-gl? That's a bad thing to do.
I was using cairo-ubuntu from AUR. Considering it might be the cause, I tried installing default cairo, it didn't solve the issue.

[Solved] Get a segmentation fault message when try to run a Fullrecall

I'm running on Arch x86_64.
Then install this package with the packer.
https://aur.archlinux.org/packages/fullrecall/
run it with the terminal and get a segmentation fault message.
I have tried to install some lib32-* but still no luck.
http://sophie.zarb.org/distrib/Mageia/2 … 2f35d/deps
Any ideas ?
Otherwise, I will run it on Wine instead.
Last edited by fieldfirst (2013-03-25 07:16:53)

The fullrecall package is unmaintained, poorly written, and out of date (the latest version on the fullrecall website is 1.5.2). It's really hard to say why it is segfaulting but I would bet that it is because fullrecall is distributed as a binary rather than as source files. This means that it links against very specific versions of its dependencies, none of which are listed in the PKGBUILD. It's very possible that the versions in the arch repos of the various lib32-* dependencies that you installed are newer versions than the binary program requires.
You could try running namcap[1] on the built package and look for the specific version of the dependency you need in the Arch Rollback Machine[2], but I'm not sure how much that will help you. If you do manage to get it working, please adopt and update the package in the AUR.
[1]https://www.archlinux.org/packages/extra/any/namcap/
[2]http://arm.konnichi.com/
Last edited by jynnantonix (2013-03-24 18:32:00)

[Solved] Deprecated warnings while updating linux

Today while updating linux to its 3.6.10-1 version I got these warnings.
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.6.10-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.6.10-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
==> WARNING: Hook 'pata' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
==> WARNING: Hook 'scsi' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
==> WARNING: Hook 'sata' is deprecated. Replace it with 'block' in your config
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [usbinput]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
I'm already using only systemd . Where should I replace the hooks with block?
Last edited by tokoro (2012-12-15 19:28:16)

Into the Pit wrote:
Have a look at your
/etc/mkinitcpio.conf.pacnew
and merge those files.
Thanks, that solved it. Last time I ignored a deprecated warning, it came back to haunt me.

[SOLVED]Easytag Segmentation fault with kde3 (kdemod)

(easytag:4811): Gtk-WARNING **: libbonoboui-2.so.0: cannot open shared object file: No such file or directory
(easytag:4811): Gtk-WARNING **: libbonoboui-2.so.0: cannot open shared object file: No such file or directory
EasyTAG 2.1.5: Abnormal exit! (PId: 4811).
Received signal SIGSEGV (11)
You have probably found a bug in EasyTAG. Please, send a bug report with a gdb backtrace ('gdb easytag core' then 'bt' and 'l') and informations to reproduce it to [email protected]
Segmentation fault
If I start up easytag while running KDE3 (kdemod), I get this problem every time. I have tried running it with openbox and it runs without a problem. I have deleted .easytag and reinstalled, but the problem continues.
EDIT: Installing libbonoboui resolves the problem. It looks like the there is a dependency issue here, I'll file a bug.
Last edited by alleyoopster (2008-08-02 17:18:06)

Allan wrote:Do a "pacman -S libbonoboui" an all should be good. I don't understand why this only occurs in KDEmod though. Is that on two different computers. File a bug report about the missing dependancy.
Yeah thanks Allan, I figured it out. Bug report at http://bugs.archlinux.org/task/11094
No it is on the same machine
Last edited by alleyoopster (2008-08-02 17:18:28)

[SOLVED] Segmentation Fault with Clementine

When I open the preferences (Ctrl+P) of Clementine it crashes with a segmentation fault.
This is the backtrace:
18:53:58.858 WARN unknown libpng warning: iCCP: known incorrect sRGB profile
18:53:58.900 WARN unknown libpng warning: iCCP: known incorrect sRGB profile
[Thread 0x7fff9ffff700 (LWP 1566) exited]
Program received signal SIGSEGV, Segmentation fault.
0x00007fffec8b9ba1 in ?? () from /usr/lib/libfontconfig.so.1
(gdb) bt
#0 0x00007fffec8b9ba1 in ?? () from /usr/lib/libfontconfig.so.1
#1 0x00007fffec8ba03f in ?? () from /usr/lib/libfontconfig.so.1
#2 0x00007fffec8b9cd8 in ?? () from /usr/lib/libfontconfig.so.1
#3 0x00007fffec8ba554 in ?? () from /usr/lib/libfontconfig.so.1
#4 0x00007fffec8ba77d in FcConfigSubstituteWithPat ()
from /usr/lib/libfontconfig.so.1
#5 0x00007fffec8c85cc in FcFontRenderPrepare ()
from /usr/lib/libfontconfig.so.1
#6 0x00007ffff32d695e in QFontDatabase::load(QFontPrivate const*, int) ()
from /usr/lib/libQtGui.so.4
#7 0x00007ffff32b35e9 in QFontPrivate::engineForScript(int) const ()
from /usr/lib/libQtGui.so.4
#8 0x00007ffff32e9252 in QTextEngine::fontEngine(QScriptItem const&, QFixed*, QFixed*, QFixed*) const () from /usr/lib/libQtGui.so.4
#9 0x00007ffff32e9a03 in QTextEngine::shapeTextWithHarfbuzz(int) const ()
from /usr/lib/libQtGui.so.4
#10 0x00007ffff32eab02 in QTextEngine::shapeText(int) const ()
from /usr/lib/libQtGui.so.4
#11 0x00007ffff32eae25 in QTextEngine::shape(int) const ()
from /usr/lib/libQtGui.so.4
#12 0x00007ffff32f0a30 in QTextEngine::boundingBox(int, int) const ()
from /usr/lib/libQtGui.so.4
#13 0x00007ffff32c79f4 in QFontMetrics::boundingRect(QString const&) const ()
---Type <return> to continue, or q <return> to quit---
from /usr/lib/libQtGui.so.4
#14 0x00007ffff34673dd in ?? () from /usr/lib/libQtGui.so.4
#15 0x00007ffff3467534 in QComboBox::sizeHint() const ()
from /usr/lib/libQtGui.so.4
#16 0x00007ffff30ce65c in QWidgetItemV2::updateCacheIfNecessary() const ()
from /usr/lib/libQtGui.so.4
#17 0x00007ffff30ce96d in QWidgetItemV2::maximumSize() const ()
from /usr/lib/libQtGui.so.4
#18 0x00007ffff30b0b55 in ?? () from /usr/lib/libQtGui.so.4
#19 0x00007ffff30b11d6 in QBoxLayout::sizeHint() const ()
from /usr/lib/libQtGui.so.4
#20 0x00007ffff30caca4 in QLayout::totalSizeHint() const ()
from /usr/lib/libQtGui.so.4
#21 0x00007ffff30dec30 in QWidget::sizeHint() const ()
from /usr/lib/libQtGui.so.4
#22 0x00007ffff30ce65c in QWidgetItemV2::updateCacheIfNecessary() const ()
from /usr/lib/libQtGui.so.4
#23 0x00007ffff30ce96d in QWidgetItemV2::maximumSize() const ()
from /usr/lib/libQtGui.so.4
#24 0x00007ffff30b0b55 in ?? () from /usr/lib/libQtGui.so.4
#25 0x00007ffff30b1206 in QBoxLayout::minimumSize() const ()
from /usr/lib/libQtGui.so.4
#26 0x00007ffff30cac34 in QLayout::totalMinimumSize() const ()
---Type <return> to continue, or q <return> to quit---
from /usr/lib/libQtGui.so.4
#27 0x00007ffff30dec60 in QWidget::minimumSizeHint() const ()
from /usr/lib/libQtGui.so.4
#28 0x00007ffff30cc8c3 in qSmartMinSize(QWidget const*) ()
from /usr/lib/libQtGui.so.4
#29 0x00007ffff350e4b9 in ?? () from /usr/lib/libQtGui.so.4
#30 0x00007ffff350e897 in QScrollArea::setWidget(QWidget*) ()
from /usr/lib/libQtGui.so.4
#31 0x0000000000765b18 in SettingsDialog::AddPage(SettingsDialog::Page, SettingsPage*, QTreeWidgetItem*) ()
#32 0x0000000000765e67 in SettingsDialog::SettingsDialog(Application*, BackgroundStreams*, QWidget*) ()
#33 0x0000000000745360 in MainWindow::OpenSettingsDialog() ()
#34 0x000000000080c1ea in ?? ()
#35 0x00007ffff6cd7b48 in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4
#36 0x00007ffff309cf82 in QAction::triggered(bool) ()
from /usr/lib/libQtGui.so.4
#37 0x00007ffff309e953 in QAction::activate(QAction::ActionEvent) ()
from /usr/lib/libQtGui.so.4
#38 0x00007ffff34c7d79 in ?? () from /usr/lib/libQtGui.so.4
#39 0x00007ffff34cc2a9 in ?? () from /usr/lib/libQtGui.so.4
#40 0x00007ffff30f262e in QWidget::event(QEvent*) ()
---Type <return> to continue, or q <return> to quit---
from /usr/lib/libQtGui.so.4
#41 0x00007ffff34d007b in QMenu::event(QEvent*) () from /usr/lib/libQtGui.so.4
#42 0x00007ffff30a30dc in QApplicationPrivate::notify_helper(QObject*, QEvent*)
() from /usr/lib/libQtGui.so.4
#43 0x00007ffff30a97dd in QApplication::notify(QObject*, QEvent*) ()
from /usr/lib/libQtGui.so.4
#44 0x00007ffff6cc3ebd in QCoreApplication::notifyInternal(QObject*, QEvent*)
() from /usr/lib/libQtCore.so.4
#45 0x00007ffff30a8f93 in QApplicationPrivate::sendMouseEvent(QWidget*, QMouseEvent*, QWidget*, QWidget*, QWidget**, QPointer<QWidget>&, bool) ()
from /usr/lib/libQtGui.so.4
#46 0x00007ffff311aedc in ?? () from /usr/lib/libQtGui.so.4
#47 0x00007ffff311961c in QApplication::x11ProcessEvent(_XEvent*) ()
from /usr/lib/libQtGui.so.4
#48 0x00007ffff3140162 in ?? () from /usr/lib/libQtGui.so.4
#49 0x00007ffff41b3296 in g_main_context_dispatch ()
from /usr/lib/libglib-2.0.so.0
#50 0x00007ffff41b35e8 in ?? () from /usr/lib/libglib-2.0.so.0
#51 0x00007ffff41b368c in g_main_context_iteration ()
from /usr/lib/libglib-2.0.so.0
#52 0x00007ffff6cf0b25 in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
#53 0x00007ffff3140216 in ?? () from /usr/lib/libQtGui.so.4
---Type <return> to continue, or q <return> to quit---
#54 0x00007ffff6cc2b1f in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
#55 0x00007ffff6cc2e15 in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
#56 0x00007ffff6cc7f4b in QCoreApplication::exec() ()
from /usr/lib/libQtCore.so.4
#57 0x00000000005db094 in main ()
This happen every time. I searched on internet but I can't find similar issue.
Thanks.
Last edited by ryuzy (2014-02-06 11:30:13)

I tried installing Infinality-bundle+fonts and it fixed the problem.
So there was a problem with my fonts, I don't know why this happened but I'm happy to have solved.
Last edited by ryuzy (2014-02-06 11:30:59)

Segmentation fault while updateing [SOLVED]

Similar Messages

Maybe you are looking for