Select in table COEP

i have select-option : scr_pernr.
i'm making select from table coep, one of the condition is pernr in scr_pernr.
problem
if i have pernr-low = 5555
i get data
if i have pernr-low = 5555 and pernr-high = 5555
i get diffrent data.
i[b]nformation:
i make new index(z) for this selection.
thanks.

Hi let me clear abt ur idea in Index.
We create index to make data selection faster.
Two types of index,
1.Primary index(by default will be created)
2.secondary index(we will create)
suppose u want to fetch 4 fields frm a table,so u will make one index with that 4 fields.
When u write select 4 fields name,then SAP will autometically use this index.
when we write select stmts,SAP will search for suitable index.
NB: Indexs will not store any data like views only used for searching.
Regs
Manas

Similar Messages

Problem with Fetching Million Records from Table COEP into an Internal Tabl

Hi Everyone ! Hope things are going well.
       Table : COEP has 6 million records.
I am trying to get records based on certain criteria, that is, there are atleast 5 conditions in the WHERE clause.
I've noticed it takes about 15 minutes to populate the internal table. How can i improve the performance to less than a minute for a fetch of 500 records from a database set of 6 million?
Regards,
Owais...

The first obvious sugession would be to use the proper indexes. I had a similar Issue with COVP which is a join of COEP and COBK. I got substanstial performance improvement by adding "where LEDNR EQ '00'" in the where clause.
Here is my select:
          SELECT kokrs
                 belnr
                 buzei
                 ebeln
                 ebelp
                 wkgbtr
                 refbn
                 bukrs
                 gjahr
            FROM covp CLIENT SPECIFIED
            INTO TABLE i_coep
             FOR ALL ENTRIES IN i_objnr
           WHERE mandt EQ sy-mandt
             AND lednr EQ '00'
             AND objnr = i_objnr-objnr
             AND kokrs = c_conarea.

Function module to get the details from table COEP

hi all,
I have to select the data from COEP table based on OBJNR.i don't have any other key information.so i have to select the data based on OBJNR only.
can any one please tell me is there any function to get the data from this table.
Thanks.

Hi
Try the fun module
K_CO_OBJECT_BALANCE_GET
see the sample select statement for COEP
clear cobrb_tab.
refresh cobrb_tab.
select objnr            " Object No
         rec_objnr1       " Ref Object No
         bureg            " Dostribution Rule
         lfdnr            " Sequence No
         perbz            " Settlement Rule
         konty            " Acct Assign Category
         bukrs            " Company Code
         kostl            " Cost Center
     into table cobrb_tab
     from cobrb
     where kostl in rn_kostl.
sort cobrb_tab by objnr rec_objnr1.
delete adjacent duplicates from cobrb_tab comparing objnr.
Get the Settlement Costs from COEP Table
clear it_set_tab.
refresh it_set_tab.
if not cobrb_tab[] is initial.
    select kokrs            " Controlling Area
           belnr            " Acc Document
           buzei            " Line Item
           perio            " Period Block
           wkgbtr           " Value in CO Curr
           lednr            " Ledger No
           objnr            " Object No
           gjahr            " Fiscal Year
           wrttp            " Actuals
           versn            " Version
           kstar            " Cost Element
           beknz            " Dr/Cr Indicator
           parob1           " Partner Object
       into table it_set_tab
       from coep
       for all entries in cobrb_tab
       where lednr = c_lednr and
             wrttp = c_wrttp2 and
             versn = c_versn and
             gjahr = p_gjahr and
             objnr = cobrb_tab-objnr and
             parob1 = cobrb_tab-rec_objnr1 and
             beknz in (c_o, c_a).
endif.
Reward points for useful Answers
Regards
Anji

Table COEP

Hi experts,
There is this requirements from the users that i need to write a report that pulls out information from this table COEP. The entries in this table is HUGE. And every time i try to do a select statement it will just time-out.
Example of the codes below:
 SELECT BUKRS MATNR PERIO GJAHR KSTAR BELNR OBJNR MBGBTR WOGBTR
 INTO TABLE IT_SALES FROM COEP
 WHERE BUKRS = COMP AND MATNR = MATERIAL AND PERIO = PERIOD AND
 GJAHR = YEAR AND
 ( KSTAR >= '0000500100' AND KSTAR <= '0000500999' ).
Any experts here can guide me? Or is there any other tables that i can look at to retrieve the information needed?
Thanks,
Lawrence

Hi,
Here they are:
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
PERIO
VRGNG
PAROB
USPOB
VBUND
PARGB
BEKNZ
You can see the indexes via attributes of the table (SE11).
Regards,
Eli

Diff b/w select endselect and select into table............

what is the difference b/w
Select
Endselect
and select into table....
Akshitha..

Hi,
When ever u want to append data into the workarea then use select ... endselect. When u r appending data into the internal table then use select. Also when u use select single then also use only select.
Eg: Using only Select
data : begin of itab occurs 0,
lifnr like lfa1-lifnr,
end of itab.
select single lifnr from lfa1 into itab.
data itab like lfa1 occurs 0 with header line.
select * from lfa1 into table itab.
Eg: Using Select .. endselect.
data : itab like lfa1 occurs 0,
wa like lfa1.
select * from lfa1 into wa.
append wa to itab.
endselect.
Regards

Problem while selecting a table after creating the dblink

Hi,
We have created the dblink for oracle to sql server and it created successfully,
But while selecting the table from oracle we are getting the below issue,
select * from "sysdiagrams"@omniyat;
ERROR at line 1:
ORA-00942: table or view does not exist
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name
'sysdiagrams'. {42S02,NativeErr = 208}[Microsoft][ODBC SQL Server Driver][SQL
Server]Statement(s) could not be prepared. {42000,NativeErr = 8180}
ORA-02063: preceding 2 lines from OMNIYAT
Kindly provide us the solution to resolve this issue.
Regards
Sham

Please see:
Odbc Connection From Oracle To SQL*Server Fails With Errors Ora-28546 and Ora-2063 When Using Connection via Database Link. (Doc ID 1389492.1)
To BottomTo Bottom
Error 08001,NativeErr = 11 Instance Invalid or Not Running Connecting to SQL*Server Using Dg4MSQL (Doc ID 1349023.1)
How to Resolve Common Errors Encountered while using Database Gateways (DG4IFMX, Dg4MSQL, DG4SYBS), DG4ODBC or Generic Connectivity (Doc ID 234517.1)
Thanks,
Hussein

Error when selecting bkpf table

select single belnr
     into it_data-belnr
     from bkpf
     where awkey = it_vbrp1-vbeln and
           blart = 'RV'.
above code i am using for selecting bkpf table , actually key field are not useful in this case & hws to use index.
plz reply.
Thanks,
Jyotsna

Hi,
select single belnr
into it_data-belnr
from bkpf
where awkey = it_vbrp1-vbeln and
blart = 'RV'.
In above query what is it_vbrp1-vbeln? if it is internal table you are missing some thing like For all entries in it_vbrp1.Check it once.

KUP-01005 error when selecting external table

Hi All,
My name is arun. I am having trouble resolving the following error. I tried to google, search oracle forum but no avail. I would really appreciate some help? I hope someone point me to the right direction with this problem. Thank you.
Scenario :
I have done the following :
1. Created the external directories using a user account(KDEV199). However by default its owned by SYS user.
2. Created the table necessary for selection. This was done by user account(KDEV199)
3. I have granted the folder privileges owned by oinstall:oracle where the 2 physical files exists. Thus all the files is owned by oracle. This was done at OS layer.
4. I have created 2 files necessary to extract data & read in oracle. This was done at OS layer.
The problem is that i have the following when i try to select the table :
SQL> select * from TEXN_IGM_MST;
select * from TEXN_IGM_MST
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "minussign": expecting one of:
"double-quoted-string, identifier, single-quoted-string"
KUP-01007: at line 7 column 10
This script used to create the table :
--Create External Table
CREATE TABLE texn_igm_mst
COMP_NO CHAR(2),
POL_NO CHAR(10),
WRITING_AGENCY_NO_1 CHAR(10),
WRITING_AGENT_NO_1 CHAR(10),
WRITING_AGENCY_NO_2 CHAR(10),
WRITING_AGENT_NO_2 CHAR(10),
POL_STS_CDE CHAR(4),
STS_CHNG_DT DATE,
POL_DTE DATE,
PAY_UP_DTE DATE,
PAY_TO_DTE CHAR(10),
MATURE_DTE DATE,
PAY_MODE_CDE CHAR(2),
PAY_METHOD_CDE CHAR(1),
MODAL_PREM_AMT NUMBER(15,2),
POL_CUR CHAR(2),
NFO_CDE CHAR(1),
DIVD_OPTION_CDE_1 CHAR(1),
DIVD_OPTION_CDE_2 CHAR(1),
OTHER_OPTION_CDE_1 CHAR(1),
OTHER_OPTION_CDE_2 CHAR(1),
RESTRICT_CDE CHAR(20),
NEXT_MODAL_PREM NUMBER(15,2),
SUSPEND_CDE CHAR(1),
EXTRACT_DTE DATE,
REASON_CDE CHAR(3),
LINE_OF_BUSS CHAR(1),
BILL_TO_DTE CHAR(10),
DUE_DAY NUMBER(3),
DAY_USE CHAR(1),
PAR_TYPE CHAR(1),
ISSUE_STATE CHAR(2),
MED_CDE CHAR(1),
RACE_CDE CHAR(1),
ADMIT_CDE CHAR(1),
REPT_STATE CHAR(2),
COLL_OFF CHAR(2),
WRITING_AGENCY CHAR(10),
LAST_ANN_PROC CHAR(3),
TIMESTAMP DATE,
SPND_EFF_DT DATE,
SPND_TRMN_DT DATE,
SPND_USER_ID CHAR(8),
CMPLN_AGT_ID CHAR(10),
TOTAL_CWA DECIMAL(17),
TOTAL_CWA_DT DATE,
DELIVERY_DT DATE,
REINSURED_CDE CHAR(1),
SERV_AGENCY CHAR(10),
ST_CODE CHAR(1),
NFO_RULE CHAR(1),
CSTAT_REASN_CD CHAR(2),
REJ_REASN_CD CHAR(2)
ORGANIZATION EXTERNAL
TYPE oracle_loader
DEFAULT DIRECTORY external_dir_clmlog
ACCESS PARAMETERS
records delimited by newline
BADFILE external_dir_clmlog:'VILFPM1.BAD'
LOGFILE external_dir_clmlog:'VILFPM1.LOG'
fields terminated by '!'
missing field values are null
--Column and format setting
COMP_NO,
POL_NO,
WRITING_AGENCY_NO_1,
WRITING_AGENT_NO_1,
WRITING_AGENCY_NO_2,
WRITING_AGENT_NO_2,
POL_STS_CDE,
STS_CHNG_DT CHAR date_format DATE Mask "yyyy-mm-dd",
POL_DTE CHAR date_format DATE Mask "yyyy-mm-dd",
PAY_UP_DTE CHAR date_format DATE Mask "yyyy-mm-dd",
PAY_TO_DTE,
MATURE_DTE CHAR date_format DATE Mask "yyyy-mm-dd",
PAY_MODE_CDE,
PAY_METHOD_CDE,
MODAL_PREM_AMT,
POL_CUR,
NFO_CDE,
DIVD_OPTION_CDE_1,
DIVD_OPTION_CDE_2,
OTHER_OPTION_CDE_1,
OTHER_OPTION_CDE_2,
RESTRICT_CDE,
NEXT_MODAL_PREM,
SUSPEND_CDE,
EXTRACT_DTE CHAR date_format DATE Mask "yyyy-mm-dd",
REASON_CDE,
LINE_OF_BUSS,
BILL_TO_DTE,
DUE_DAY,
DAY_USE,
PAR_TYPE,
ISSUE_STATE,
MED_CDE,
RACE_CDE,
ADMIT_CDE,
REPT_STATE,
COLL_OFF,
WRITING_AGENCY,
LAST_ANN_PROC,
TIMESTAMP CHAR date_format DATE Mask "yyyy-mm-dd-hh24.mi.ss.ffffff",
SPND_EFF_DT CHAR date_format DATE Mask "yyyy-mm-dd",
SPND_TRMN_DT CHAR date_format DATE Mask "yyyy-mm-dd",
SPND_USER_ID,
CMPLN_AGT_ID,
TOTAL_CWA,
TOTAL_CWA_DT CHAR date_format DATE Mask "yyyy-mm-dd",
DELIVERY_DT CHAR date_format DATE Mask "yyyy-mm-dd",
REINSURED_CDE,
SERV_AGENCY,
ST_CODE,
NFO_RULE,
CSTAT_REASN_CD,
REJ_REASN_CD
LOCATION (external_dir_clmxcom:'VILFPM1.DAT')
DB version :
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
OS version :
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1
Linux KAITLSDS01 2.6.32.12-0.7-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 x86_64 x86_64 GNU/Linux
---------------------------------------------------------------------------------------------------------------------------------------

Pl see MOS Doc 302672.1 (Select From External Table Gives ORA-29913 ORA-29400 KUP-554 KUP-1005)
Srini

BADI or User exit for FB50 to update custom field in table COEP

Hi all,
i have added one custom field in table COEP through include CI_COBL .
when i do posting through sales order(VA02) or purchase order(ME22n) that custom fields in COEP get updated with controlling document
and through BADI AC_DOCUMENT i m updating that custom field in COEP.
but when i do manual posting through FB50 controlling document is generated in COEP but i m not able to update that custom field
because in this case BADI AC_DOCUMENT is not get triggered.
is there any BADI or User exit or enhancement spot for FB50 through which i can update that custom field in table COEP

Hi Sandy,
Thanks for u r reply,
RFAVIS01 is not getting triggered through FB50
and F180A001 ( EXIT_SAPLF048_001) is getting triggered but it doesnt contain COEP field in its parameter
import - F180A_DOC_HEAD_TAB
F180A_DOC_ITEM_TAB
changing - RELATION_TAB

How to fetch the data from the table COEP for WBS element,cost center,,,,,?

Hi,
I would like to retrive the data from the table COEP ,based on KOKRS,BELNR fields.
I need the output for Cost centre, cost element, wbs element,net work ,activity.
These values are storing OBJNR ,OBJNAR_1,OBJNR_2,OBJNR_N3.
But here always these field are not giving the correct values.
for example : for one record COST CENTRE vlaue is storing in OBJNR_1 field,
for one record COST CENTRE vlaue is storing in OBJNR_2 field,
for one record COST CENTRE vlaue is storing in OBJNR_3 field.
Here SAP has used a generic approach for this.
How can I dispaly the values in this case ?
Thanks and Regards
Srinivas.N

Hi,
I am asking, how can we say OBJNR_1 value alwyas belongs to cost center ?
USPOB is not filling always.

"Select" Physical table as LTS for a Fact table

Hi,
I am very new to OBIEE, still in the learning phase.
Scenario 1:
I have a "Select" Physical table which is joined (inner join) to a Fact table in the Physical layer. I have other dimensions joined to this fact table.
In BMM, I created a logical table for the fact table with 2 Logical Table Sources (the fact table & the select physical table). No errors in the consistency check.
When I create an analysis with columns from the fact table and the select table, I don't see any data for the select table column.
Scenario 2:
In this scenario, I created an inner join between "Select" physical table and a Dimension table instead of the Fact table.
In BMM, I created a logical table for the dimension table with 2 Logical Table Sources (the dimension table & the select physical table). No errors in the consistency check.
When I create an analysis with columns from the dimension table and the select table, I see data for all the columns.
What am I missing here? Why is it not working in first scenario?
Any help is greatly appreciated.
Thanks,
SP

Hi,
If I understand your description correctly, then your materialized view skips some dimensions (infrequent ones). However, when you reference these skipped dimensions in filters, the queries are hitting the materialized view and failing as these values do not exist. In this case, you could resolve it as follows
1. Create dimensional hierarchies for all dimensions.
2. In the fact table's logical sources set the content tabs properly. (Yes, I think this is it).
When you skipped some dimensions, the grain of the new fact source (the materialized view in this case) is changed. For example:
Say a fact is available with the keys for Product, Customer, Promotion dimensions. The grain for this is Product * Customer * Promotion
Say another fact is available with the keys for Product, Customer. The grain for this is Product * Customer (In fact, I would say it is Product * Customer * Promotion Total).
So in the second case, the grain of the table is changed. So setting appropriate content levels for these sources would automatically switch the sources.
So, I request you to try these settings and let me know if it works.
Thank you,
Dhar

How to create a "Selection Conditions" table similar to that found in se11?

Hi,
My team is trying to develop a SAP data migration tool (DMT) using ABAP.
One of the functionalities in the DMT is to validate the data imported to the staging area tables against some reference tables (e.g. SAP tables).
To do this, I would need to have a "Selection Conditions" table similar to that found in se11 (se11--> Display "View" --> Select "Selection Conditions" tab). This table would allow me to specify my 'referencing' conditions (e.g. Table = "ZMYTAB", Field = "ZMYFLD", OPERATOR = "EQ", Comparison Value = "ZMYTAB2", AND/OR = "").
Are there any ready-made codes out there for such a "Selection Conditions" table? Or did SAP provide a built-in object for such a table?
Any help would be greatly appreciated. Thanks!

personnally I do use the standard FMs for dynamic selections
see FM FREE_SELECTIONS_DIALOG
Look at this sample code:
http://sap.ittoolbox.com/code/archives.asp?i=10&d=2919&a=s

Html form for select * from table a

Hi all,
I m looking for report on header/footer part from one apex pages
which will display context from table a, like sql statement
select * from table a, written in html.
Is any examples in java script/html select from tables
(and same insert into table A (...) select * from table b)
thanks,
Gordan

Hello Gordan,
Do you want to show the whole report or just some data of it?
If it's for ex just the name and address you could create two items and have a process or computation to fill it with your select statement.
If it's the whole report, just create the report and put it in for ex. Region 1. In your page template you can specify that Region 1 needs to come into the footer.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Xmlgen.getxml("select * from table") returns null pointer exception

I am running oracle 8i on solaris server and clinet on windows
NT and i am this select statement
select xmlgen.getxml("select * from table") from dual ,its
returning null pointer exception,i have tried it through
jdbc,even then its returning xml as
<?xml version = '1.0'?>
<ERROR>java.lang.NullPointerException</ERROR>
can any body tell me the error.Help will be really appreciated.I
need an urgent response,if some one can guide me please.
My email is [email protected],if you can give me a quick
response on this email,your effot will be appreciated.
thanks
Masood

What is actually throwing the NullPointerException? rs.getMetaData() or table.setModel()?

How do I do SELECT * FROM TABLE WHERE KEY IN ({list})?

The title says it all really.
Is there a reasonable performant way to perform the query
SELECT * FROM TABLE WHERE KEY IN ({list})where {list} is String []?
I am currently creating a PreparedStatement with a for loop like this StringBuffer sb = new StringBuffer ("SELECT * FROM TABLE WHERE ID IN (");
for (int ii=0;ii<keys.length;ii++) {
sb.append (keys [ii]);
if (ii != keys.length-1) sb.append (",");
sb.append (")");but this means that the prepared statement is created each time I call my method and so I'm not sure that the optimizer will find it easy to cope with. Is there a construction that I'm missing along the lines of SELECT * FROM TABLE WHERE KEY = ? where I can create the PreparedStatement once and just call setObject or something on it when the values in {list} change?

but this means that the prepared statement is created
each time I call my method and so I'm not sure that
the optimizer will find it easy to cope with.You are right, the optimizer won't find that easy to deal with (presuming that is even relevant for your driver/database.) But most optimizers won't do anything with statements that change and that is what you are doing.
You could create several prepared statements which have a common number of bind variables. For example 10 statements with from 1 to 10 bind values. This will work if most of the queries use those.

Select in table COEP

Similar Messages

Maybe you are looking for