Selectively Print Report Sections

I have a report that can run in either batch or interactive mode.
Presently, I am using the SRW.message and a Before Report trigger to check the field and not generate the report if this field is NULL. This forces the user to respond to SRW message. This works correctly when the report is run in Interactive mode. However, when the report runs in Batch, the report doesn't print, but neither is the user notified that there was an issue.
I would like to define the regular report in the Main section and an Error report in the Trailer sction. Is it possible to use report triggers to print the Main section OR the Trailer section?

There's no trigger for the sections, but you don't need the trailer section for what you want. You need two frames, one for your layout and one for your error report. Write the triggers on the frames and connect them via an anchor together. Use the collabsing properties of the anchor, so your error report will be at the same position like your normal report.
Regards
Rainer

Similar Messages

Why cant i print my e print report

why cant i print my settings for eprint.im connected to a network.it will not register the printersemail address

Hey dciciarelli!
Sorry to hear you're having a problem! What kind of printer do you have and what error message are you getting? In the mean time, here are some general things you can try. Power cycle your printer by unplugging it for about 30 seconds and then plugging it back in. If that doesn't work, try manually printing the page. This can be done either by going to Setup->web services->Printer email address, or by going to the ePrint button on the touchscreen and selecting print report/information page.
If you tell me the model of printer I can provide you with more detailed assistance.
Hope this helps!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to get Report Builder to print a section on the same page

I have a section of my report that is three bands. A header
band, the detail band, and a total line band. Sometimes this
section will get split up and print part on the next page. So
basically I need for this section to print on the same page. I know
that I could insert a page break right above the header, but this
will make my report way longer than it needs to be. I have also
unchecked "split allowed" for that band also but that didn't make a
difference. Is there some way to group three bands together so that
if it is two big to print the section on the current page then
print the whole section on the next page. It is driving our
accounting lady nuts because when she likes to verify that the
totals are coming out right and sometimes she has to flip over to
the next page to continue calculating.

you need to create a multi-instrument in the environment next to your audio-instrument,then push a cable from there to your audio-instrument.in the arrange window your multi-instrument will appear in the window where you select the track-type next to the audio tracks, audio-busses etc. these midi tracks now trigger your vsti on the selected midi channel.you have to record your midi now on these tracks and not on the audio-instrument track,because there you only trigger its own channel. i hope i explained it well but i think you have understood what i ment.

Print multiple sections in report

How do I print multiple sections in a report?
For example, if I have 5 select statements in my data section and want to print them seperately, one after the other, how would I do that?
I do not want to merge the data together. I want it to be like 5 reports concatenated together.
Query1 Title
Query1Results
Query2 Title
Query2Results
... etc ...

What you need to do is create a new main frame for each query. The easy way that use to do this is create the section of the report and let the wizard create the frames for me. Then I move them around to make the section look the way I want it to. Then I open a new report. This one I'll build it using the second query. Then again use the wizard to setup the frames. Then you'll select the main frame from the second report using the frame selet button copy it and paste the layout into the first report. You will want to paste it under the first section. A little trick here is to first draw a small line right above where you want the second section. The paste the second section. This will make sure the the second section is close to where you want it. If you do not do this Reports will put it on top of the first section a lot of times. You'll have to recreate the data model again, but that is easier then setting up all the framing on a complex layout. Then repete the second report step until you have done all the queries or sections you want.
I hope that helps,
Tom

"Print report REKORD 80 has not selected any data for correspondence SAP18"

When executed FBCJ transaction click the "print cash journal" button then appears the following message "Print report REKORD 80 has not selected any data for correspondence SAP18"
What is the procedure for to fix error?
Best regards
John

HI,
John.
please refer the following link.
correspondence type
Regards,
satish

Crystal Reports 2008 crash when Select Page or Print Report

Hy,
I Have Crystal Reports 2008 on Windows Vista. When I select page or I print reports, Crystal Reports crash. I tried to uninstall Crystal 8.5 and Crystal XI that I was on the same computer and manually removed all entry in Registry. After this I reinstalled Crystall 2008 but the problem was not resolved.
So I tracked the dll called by CRW32.EXE and I found that the problem was on a DLL of Microsoft Office OneNote. I uninstall the Microsoft Office OneNote printer that Office Installation Program created for OneNote and now all work fine. I hope that this can help other people that have the same problem.
Ciao Filippo

Thank You for the information Filippo,
This is actually a known issue with CR 2008 when a printer driver is missing at least one file. Our developers are aware of the issue and are planning to release a fix soon.

Print Report using ASCII command through printer selection available on windows

Hi,
I'm using Labview 2009 to create a report using Report Generation Toolkit.
Creating a report is not the problem, the problem is I need to print the report manually by sending an ASCII Code.
I noticed that there are few example on send ASCII code command, but neither of them are related to printing.
The printer I use is Panasonic dot matrix printer KX-P1121E with USB port. (Fanfold type of paper)
I used "NI_report_lvclass: Print report.vi" from Report Generation before this to print my report, everything is okay and not receiving any error.
But I noticed that after finish printing, the paper will automatically feed out as if that VI (Print report.vi) is sending out "Form Feed" (FF) Command to the printer.
My application cannot use this method because I need to print a set of data in every minute. If the data only have 2 rows, then it will be a wasting a lot of paper if everytime finished printing paper feeding out. I want the printer to continue standby on the same paper after finished printing previous data. In other words, maybe just manually send "Line Feed or Carriage Return" to the printer.
So I have a few things need to be clarified step by step;
1. How can I send an ASCII Code to my printer? Do you have any example for this? link below is the character of ASCII Codes that can be use :http://webpages.charter.net/dperr/links/esc_p83.htm
2. Can I send a report created by report generation to be printed using this ASCII command method?
3. If my printer is setup by using windows (Meaning: Available on "Printer and Faxes" list), How can I configure the printer setup in sending the ASCII Code?
Really appreciated your reply
Thanks!

Hi Zwired1,
Just to make sure I fully understand the situation - I am assuming since you say you are printing to two different printers that when you are using the Print Report.vi you are using the printer name string to specify which printer you would like to print on. And if the printer that you specify is not functioning it automatically prints on the other printer, is that correct?
From looking at the code in the Print Report.vi, it looks like if you specify a printer name in the input string, if there is a problem with that printer or if that printer is unavailable, the VI should not print anything, so please let me know if that is not the behavior you are seeing.
For your question about checking the health of printers, there is a VI in the report gen toolkit called Query Available Printers. You can find it if you open up the Print Report.vi and choose the Standard Report instance, the Query Available Printers.vi is on the block diagram of that VI. It will return the list of available printers and the default printer.
I hope that helps,

Form 6i printing report directly to printer

Hi Professionals,
I am in badly need of help to print my barcode report directly to printer from form, currently it is working fine if i make it preview first and then user has to select network printer to print, but user is not accepting that manual step, and therefore we are unable to launch our material management module.
MY CURRENT CODE WHICH WORKING FINE WITH PREVIEW..................
add_parameter(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PREVIEW');
add_parameter(PL_ID, 'MAXIMIZE', TEXT_PARAMETER, 'YES');
add_parameter(pl_id,'paramform',TEXT_PARAMETER,'NO');
add_parameter(pl_id,'STR',TEXT_PARAMETER,:IM_STR_ISSUE_MASTER.STR_CODE);
add_parameter(pl_id,'BAT',TEXT_PARAMETER,:IM_STR_ISSUE_DETAILS.BAT_ID);
add_parameter(pl_id,'DIV',TEXT_PARAMETER,:IM_STR_ISSUE_DETAILS.GRP_CODE);
add_parameter(pl_id,'GRP',TEXT_PARAMETER,:IM_STR_ISSUE_DETAILS.SUB_GRP_CODE);
add_parameter(pl_id,'ITM',TEXT_PARAMETER,:IM_STR_ISSUE_DETAILS.ITEM_CODE);
add_parameter(pl_id,'COPIES',TEXT_PARAMETER,:IM_STR_ISSUE_DETAILS.QTY);
RUN_PRODUCT(REPORTS,'F:\IMS\REPORTS\STOCK_IN_BARCODE.rep',SYNCHRONOUS,RUNTIME,FILESYSTEM,PL_ID);
IF I CHANGE IT TO THE FOLLOWING FOR DIRECT PRINTING IT IS NOT WORKING
ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, 'SOLABEL');
I appreciate any efforts to resolve this issue.
Thanks
Ahon
Edited by: [email protected] on Oct 4, 2009 11:20 PM

Guide to Implement local printing on client in 10gas/9ias
To archive this goal we have used orarrp(Oracle Reports Remote Printing Utility), which can be downloaded from the OTN website http://otn.oracle.com/sample/products/reports/index.html.
Steps:
1.Add the required ORARRP mime types to the Oracle HTTP Server configuration.
(Note: This will be the Oracle HTTP Server belonging to the Oracle Application Server 10g/9ias middle (BI & Forms) tier)
Do this manually by editing the httpd.conf
or
via the Oracle Application Server 10g AS Console e.g.
Navigate to the Middle Tier Components Page
Click on HTTP_Server -> Administration -> MIME Types
NOTE: MIME types added in httpd.conf are as per requirement mode in which report has to be run e.g. pdf, rt(rtf) and html etc. syntax for manual entry in httpd.conf is given below.
AddType application/x-orarrp-text     rrpt
AddType application/x-orarrp-ps     rrpp
AddType application/x-orarrp-pdf     rrpa
AddType application/x-orarrp-rt     rrpr
AddType application/x-orarrp-ini     rrpi
AddType application/x-orarrp-html     rrph
2. Create an aliasmatch in forms.conf pointing to a physical directory \tmp- for example, directory will be c:\tmp
Do this by manually editing the forms.conf
or
via the Oracle Application Server 10g AS Console e.g.
Navigate to the Middle Tier Components Page
Click on HTTP_Server -> Administration -> Advanced Server Properties -> forms.conf
Add a line like :
# Virtual path for physical directory of temp
AliasMatch ^/tmp/(..*) "C:\tmp/$1"
** IMPORTANT NOTE **
The advantages of making the changes via EM / AS console, rather than editing the files manually, are:
- the EM / AS console will put the mime type entries in the correct place
- the EM / AS console automatically issues a 'dcmctl updateconfig' which synchronizes the file changes with the Infrastructure Metadata Repository
- the EM / AS console will do the required restart of the HTTP Server component
(Only the HTTP Server needs to be stopped and restarted – Oracle AS 10g components can remain up and running)
If the changes are made manually then the following commands must be issued after the changes to httpd.conf and forms.conf have been made.
Run these command at run prompt
DRIVE:\oracle\FRHome_1\dcm\bin\dcmctl.bat updateconfig -ct ohs -v -d
(to synchronize the changes with the Metadata Repository)
DRIVE:\oracle\FRHome_1\dcm\bin\dcmctl.bat stop -ct ohs -v -d
DRIVE:\oracle\FRHome_1\dcm\bin\dcmctl.bat start -ct ohs -v -d
where DRIVE: is the drive where \oracle\frhome_1\ is installed.
3. Copy and run orarrp.exe on client machine in program files\orarrp\ folder.
4. Set value of options '”choose_printer=no” in orarrp.ini created at above folder.
5. Add following lines in your code of run_report procedure.
In declare section
vc_file varchar2(225);
In begin block add
/* Generate a pseudo unique filename */
vcfile:=:global.user_code||to_char(sysdate,'YYYYMMDDHHMISS');
vcfile:=vcfile||'.rrpr';
/* In this example - output will be rtf so adding .rrpr extension */
set_report_object_property(repid, report_filename,store_var);
set_report_object_property(repid, report_server, :global.r_server);
set_report_object_property(repid, report_execution_mode, batch);
set_report_object_property(repid, report_comm_mode, SYNCHRONOUS);
set_report_object_property(repid, report_destype, file);
set_report_object_property(repid, report_desformat,'rtf');
set_report_object_property(repid,REPORT_DESNAME,'C:\tmp\'||vcFile);
---- path can be made dynamic by making a database entry in makess.path_entry for tmp folder and
---using proc_path procedure from path lib.
:GLOBAL.PrintOutPut := vcFile;
In Run report section make following change:
     vc_reportserverjob := RUN_REPORT_OBJECT(repid,pi_id);
     report_job_id:=substr(vc_reportserverjob,length(:global.r_server+2,length(vc_reportserverjob));
     v_rep_status:=report_object_status(vc_reportserverjob);
     if v_rep_status='FINISHED' then
          web.show_document('/tmp/'||:global.printoutput,'_blank');
     else
          message ('error when running report'||v_rep_status);
end if;
Edited by: amitphynyl on Oct 5, 2009 1:36 AM

BO XI R2 - "Blank "Crystal Reports Viewer" window - attempt to print report

My company recently set up a Business Object Enterprise XI Release 2 server. On the server are a number of crystal reports that are run interactively by users, through the user console. The expectation is that the user will log on to the BI server, click on the report title, enter the parameters, see a preview of the report in the Crystal Report Viewer, then click the print icon on the Crystal Report Viewer toolbar.
Our corporate standard is current Windows XP SP3, with Internet Explorer 8; By default, users are set up to use the DHTML report viewer. The reports were developed with the Crystal Reports XI R2 report designer, and connect to an Oracle 10g database through Oracle client.
When users attempt to view, then print the reports, the user is able to select the report, enter the parameters, view the report data, and even page through the report preview with no issues. However, when the user attempts to print the report by clicking the print icon on the Crystal Reports Viewer toolbar, a blank "Crystal Reports Viewer" window pops up and remains indefinitely.
The really puzzling thing about this issue is that for about 1/3 of our users, printing will work - a print dialog will appear, allowing the user to select a printer, and when the user clicks OK, the report will print. For the other 2/3 of our users, the blank "Crystal Reports Viewer" window pops up.
I have added the BO XI R2 server's address to trusted sites, adopted the lowest security settings for trusted sites, and enabled all activity I could think of in IE security settings (ActiveX controls-related). I also ran the web site in compatibilitiy mode.
Has anyone on this forum experienced this issue, and does anyone here know how to resolve it?
Thank you,
Bob Gardner

I suspect that this behavior occurs because the client computer is unable to download ActiveX controls.
The report viewer requires the PrintControl.dll to print reports from the client computer. The PrintControl.dll downloads automatically if it has not been previously downloaded on to the client computer, provided that the user that is currently logged on is able to download ActiveX controls.
To enable the download of ActiveX controls on the client computer, perform the following steps:
1) Open your Internet Explorer.
2) From the Tools menu, select Internet Options.
3) In the Security tab, select the web content zone that corresponds to your web application.
4) Click Custom Level.
5) In the Security Settings dialog box, scroll down to find the ActiveX controls and plug-ins section.
6) Select Enable or Prompt for the Download signed ActiveX controls item.
7) The print dialog box will now appear successfully when clicking the print button in the report viewer.
If the above does not help, try to troubleshoot this as follows:
1) click the print button (this will cause a postback to the web page) and then cancel the print dialog. right-click in the web page and select "View Source".
2) Search for the word "printcontrol.cab". This will show you where the application is trying to download the printcontrol from.
Paste the URL into a browser.
3) If you get prompted to "open or save to disk" the url is correct and there is a browser setting or possibly even a system policy preventing the download.
4) If you get a "404 page not found" or a similar error message, investigate the URL.
5) If the issue is on your local web server, see if it is possible to browse to the URL in IIS manager.
- Ludek

Hyperion Anaylzer - how to Print report with information in pages?

Hi, I use Hyperion Analyzer Version: 6.1.1.00206 (from Help | About menu). I created report with pages (on Navigate button selected the Pages). In pages are months (January, February, March, etc). Now I would like to print current report. So I did: 1. click on arrow beside Print button 2. Print Current Report windows is displayed. I selected default options and press OK button. Report is printed, but there is no page information printed out. So on paper there is report without months (January, February, March, etc). How to print report with information in pages? Thanks, Grofaty

Jia Shun,
I had the same issue for printing A/R Invoices - I created a Crystal Report based on a SQL View, works fine with A/R Invoice document, but the Draft Invoice printing has 3 pages: 1st page blank, 2nd page with watermark "DRAFT", 3rd page my Crystal Report layout without any data. When printing normally it is only 1 page.
Here is what I did as a work around:
Create two SQL Views, one select from OINV (joining INV1 and other tables needed), the other select from ODRF (joining DRF1 and other tables needed), for the draft printing.
Create two identicle Crystal Reports, only difference are: datasource location (from different views), the "draft" crystal report has a watermark section.
Go to Administration>System Initialization>Print Preferences and uncheck "Print draft watermark..."
Import both crystal reports. Invoice can be printed normally. But the Draft Invoice has more steps: Open Draft document report, change settings so it shows the DocEntry in the Draft Table. Select and open the desired document, hit Print Preview, and enter the DocEntry, it displays the layout with data and "DRAFT" watermark.
This is a workaround. I don't like it because it is not scalable - too much workload if you want to print 100 invoices.
Hopefully someone will provide a better solution.
regards,
G

AP Cheque Printing Report

Hi All,
Can anybody help me out to do the AP cheque printing report using XML Publisher.
Followings are the steps I did.
1. Create rdf and register in APPS.
Executable is defined in Customization AP application
Concurrent Program is in Payables application.
2. Create Data Definition and Template in XML Publisher administrator in Payables.
3. Attached the Concurrent program in AP Format set up.
4. Make the Payment, The report is calling and showing completed normal but the output is not coming.
5. Then I run the XML report Publisher and pass the request id then the output is coming as PDF.
But the requirement is when we make the payment , The output should come and it will go to the printer for printing..
Please help me where I made the mistake.
or please guide me what approach I should follow.
Thanks in Advance.
Pradipta

Here is my code:
function AfterReport return boolean is
vrequest_id number;
v_success BOOLEAN;
v_printer fnd_concurrent_requests.printer%TYPE;
v_print_style fnd_concurrent_requests.print_style%TYPE;
begin
-- Set up printer for the following reports
-- Get the printer and style for this report for use with the following reports select printer, print_style
into v_printer, v_print_style
from fnd_concurrent_requests
where request_id = :P_CONC_REQUEST_ID;
srw.message(999, 'Print options: ' || v_printer || '/' || v_print_style);
v_success := fnd_request.set_print_options (v_printer
,v_print_style
,1
,TRUE
,'N'
,'SKIP'); IF NOT v_success THEN
srw.message(999, 'Failure to set print options'); ELSE
srw.message(999, 'Print options set'); end if;
-- Submit the XML Report Publisher request to complete the printed Dunning Letters
vrequest_id := FND_REQUEST.SUBMIT_REQUEST('XDO',
'XDOREPPB',
NULL,
NULL,
FALSE,
:P_CONC_REQUEST_ID,
222, -- Receivables
'XX_ARDLPPRT_RPT',
'en', 'N', 'RTF', 'PDF', NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL);
-- commit to submit request
commit;
IF vrequest_id = 0 THEN -- if request id
srw.message(999, 'Failure to submit Concurrent Request to Print Dunning Letters');
ELSE
srw.message(999, 'request id ' || to_char(vrequest_id) || ' submitted');
end if;
-- Original Afterreport trigger stuff
SRW.DO_SQL('alter session set sql_trace false');
return (TRUE);
end;

Po Printing Report

Hi I am working on PO Printing Report.There are mainly three section .1 is Header part which contains informaition like Bill to Address Ship to address,vendor address payment terms etc,middle part contais lots of information like header notes,supplier header note,note to vendor ,ship instruction,line notes ,if po cancelled then its informaition,if any line gets cancelled than the same information , all lines for this PO and many more.After this section we have footer like part which have total column and signature.The total and signature are dynamic.i.e should appean in last page only.The last page of report for a PO conatains a image Terms And Condtion.
Now problem is as there are lots of data in middle part ,It pushes the footer part to the next page.I need to break the page after certain height of table or certain no of records in table so as to have footer remain in each page.
Is there any way to fix no of records in middle part or calculate heigth of table at run time ...when it reaches to its max height ,I break the page.
Or I include the footer section in page footer but as its dynamic How can I get total column value and signature url dynamically.
Please suggest me how to achieve this.....

Srini,
Thanks so much for your reply!!!
1. Ok, but how do I hide a whole page? I noticed the conditional formatting, but I want to "not print" a whole page when this page is a "Purchase Agreement".
2. I've checked the source - it's coming from POL.QUANTITY_TO_PRINT - POL is a view that is unpopulated. I assume it's populated at run-time. So now I am trying to track down where it's populated, but can't find that in report builder. The quantity is being taken into account, because I put a total at the bottom of the page, and that number matches price * pol.quantity_to_print. Very strange...
Finally, here's another question, if you don't mind:
3. When I print a purchase order that is set up as a blanket, as I mentioned before, I get my "Purchase Agreement" first, and then one (or more) pages per release. But the "Page Number" on each is "1" because each is a one-page PO. But my "total pages" is "3", so each page reads "Page 1 of 3". Any idea if there's a way around that?
Thanks again! Hoping you have some more insight! :)
Cheers!
Steve

Application Build Failure on Excel.Print Report call

Developing software in LV2009 that uses Report Generation Toolkit to read/write from Excel templates. Program runs fine in development mode. AppBuilder crashes on *.exe build when adding NIReport.lvclassrint Report.vi
Digging down, I find a broken run arrow on the NI_Excel.lvclassrint Report.vi as shown here:
According to the Show Errors dialog, there is an unwired or bad terminal on the PrintOut invoke node; however I have not made any changes to this shipping VI (that I know of). I did try wiring all the unused inputs (empty strings to From, To, and PrToFileName; false booleans to Preview, PrintToFile, and Collate) after I ran into the error, but that had no luck either. Also tried inserting To Variant conversions for all input elements, just in case there was a problem in the implicit data to variant conversion.
I have also tried a ctrl+shift+run compile of the whole application, but that doesn't seem to get it to un-break, either.
Has anyone run into this problem before? It's weird that it would just break like that--I had actually compiled this particular executable before, using pretty much all the same Report Generation Toolkit VIs that I am using now. The only difference since the last build was that I replaced a Report.SaveAs function with a Report.Save function.
Also of note: I have included all the Report classes in my project and build specification in order to compile the dependencies into support libraries to minimize the number of labview files included with the executable distribution. This is probably why an error with the Print Report.vi calls is crashing the AppBuilder even when I don't explicitly call that VI anywhere in my code.
Solved!
Go to Solution.

Hey Guys,
I know this post if kind of old but I hope maybe one of you can help me out. I'm using an invoke node similar to what is above to print out an Excel spreadsheet to the default printer. My issue is that when I try to print from the spreadsheet from the executable, the executable crashes. I know it is that invoke node. The reason why I say that is because until recently I had two development computers, one running on Windows 7 LabVIEW 2010, and one running on Windows XP LabVIEW2010. The original .exe was built with the XP machine, when I tried to make some changes with the Windows 7 machine and open the project it would say that there was a missing connection to the invoke node even though I did not touch that part of the application. I would then remove the invoke node, add it again and it would clear the error for whatever reason. I would then build the .exe with the Windows 7 machine and when it would run, the application would crash at the point where it goes to print the spreadsheet. I got around this by building the .exe with the Windows XP machine, and it worked fine without any issues. However, my Windows XP machine cra**ed out so i'm no longer able to build the .exe on the XP machine . I needed to make some changes to the .exe not anything involving this section of the code and for whatever reason when the application goes to print it crashes. I get some criptic crash report from Windows that is pretty much useless. I think its a Windows thing. This was workign correctly though until I did a build on the Windows 7 machine.
Attachments:
Printout Invoke Node Excel.png ‏70 KB
crash1.png ‏22 KB
crash2.png ‏23 KB

Error 7 occurred at Get LV Class Default Value.vi only in my executable for Print Report - LV 2010 SP1

I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
Error 7 occurred at Get LV Class Default Value.vi
With the following text:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Complete call chain:
     Get LV Class Default Value.vi
     NI_report.lvclass:New Report.vi
     print report.vi
     EMS V3.0 streamline.vi
LabVIEW attempted to load the class at this path:
H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
"EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
Any help would be appreciated. Thanks.
Garrett Herning

Ok, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
Error:
An error has occurred. Expand the Details section for more information.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Method Name: Linker:Write Info To File

Crystal Report XI Print report on different paper size (A4/Letter)

Hi,
I have designed report in Crystal XI using paper sieze Letter. Multipler sites are using this application. User in USA are using Letter size paper and User in Euorpe are using A4 size paper. All reports work fine for USA users.
When Eurpoe users print the report on A4 size paper which set in Letter size, the report is truncated from Header or footer. They are printing report from Application and application is set on Citix server.
If Anybody have any idea how to setup Crystal report so it can print on any paper size?
Thanks
Bhagvat

Hi Don,
Please find the below description.
Background: Crystal Report XI is utilized to develop and view reports with data source from Oracle based LIMS application (Vendor: LabWare). The reports are printed using network printer on US Letter paper for users located in North America and on A4 paper for users located in Europe. The report format is US Letter and designed to print on both paper formats i.e. Letter and A4.
Issue: When reports are printed by users in Europe using A4 format paper the printer defaults to US Letter paper (in printer preferences) resulting to data cut off from top and bottom on the printout.
1)      When report layout is select to A4 during developing reports using CR, the printing preferences changes to A4 when printed and vice versa for Letter format. How can we avoid CR to enforce from changing printing preferences?
2)     According to Citrix engineers in the company, the printer drivers installed on Citrix servers have nothing to do with printing preferences and CR defaults to paper size based on report design. What do we tell them about doing different to resolve this issue?
3)    Even though a printer preference of default printer on local desktop is changed to A4, the report gets printed to Letter format result in data cutoff. We have tried this option with several HP printers from few different company locations.
Thanks
Bhagvat

Selectively Print Report Sections

Similar Messages

Maybe you are looking for