Send EDI request to B2B from BPEL

I am working on an integration effort.
Our plan would be have a BPEL pick up a X12 message from IBM MQ and send it to B2B to transform it into a XML format. Because of the asynchronous manner. The B2B will pass the result to a TP, which is another BPEL process.
We believe we need to create a listening channel for the B2B host TP to pick up the request. If we use a B2B Adpater in our composite, what should the listening channel be? An alternative would be the BPEL process drop the message in a JMS queue through JMS adapter and the listening channel is pointing to the JMS queue.
Can anybody confirm our solution or help us find a better solution?
Thanks
John

If we use a B2B Adpater in our composite, what should the listening channel be?It depends on mode of integration (Integration Type in adapter) and default internal delivery channel (queue) being used in B2B.
If you select "Default" mode in B2B adapter then no listening channel needs to be configured. A B2B WSDL is generated for the SOA composite to communicate with Oracle B2B directly.
If you select "AQ" mode in B2B adapter and using default internal delivery channel (IP_IN_QUEUE or IP_OUT_QUEUE depending upon direction) in B2B, then also no listening channel needs to be configured. However if you have created a custom AQ queue and using same in B2B adapter then an internal listening channel of Generic AQ type needs to be created.
Similarly, if you select "JMS" mode in B2B adapter and using default internal delivery channel (B2B_IN_QUEUE or B2B_OUT_QUEUE depending upon direction) in B2B, then also no listening channel needs to be configured. However if you have created a custom JMS queue and using same in B2B adapter then an internal listening channel of Generic JMS type needs to be created.
Remember, B2B can only use AQ of the type IP_MESSAGE_TYPE.
Please refer -
http://download.oracle.com/docs/cd/E17904_01/integration.1111/e10229/intro_ui.htm#CHDEGEEB
Regards,
Anuj

Similar Messages

  • How to send  a request to servlet from a java client.

    I called a servlet from java client using URL object.
    I could establish a connection with server and display
    the content(like req.getservername etc.,)
    of servlet on client side(DOS prompt).
    My question is how do i send a request to servlet from the client.
    let me say, i have to send a value as 10 to servlet and do some processing
    ( like 10*2 = 20) display the output (20) on client side..
    It will be appreciated if u can mention the syntax...

    just add the query string to the url you use to create the URL object from.

  • Passing EDI filename for 850 from B2B Gateway to BPEL

    Hi,
    Is there any way to pass the EDI filename for 850 from B2B Gateway to BPEL via AQ? we want to store the inbound filename in the database along with the PO.
    we are using 10g.
    Thanks,
    Naveen

    Hi Naveen,
    Generally this could be done using the message id only as mentioned by ew. Just what you need to do is to lookup in the table and find the payload corresponding to that message id.
    However, WORKAROUND would be to use "Preserve Filename" feature of 11g B2B (which works only for FILE,FTP and SFTP transport protocols). In this case you have to pass the filename in the header "ACTION", as mentioned by Nitesh.
    Regards,
    Anuj

  • Error while sending request to Webservice from Client app on Weblogic

    Hi Everybody,
    As part of web service development and deployment, I created one simple webservice and tried to deploy it on Apache Tomcat 5.5 and then weblogic 9.2. It worked fine on Apache Tomcat but it didn't work on Weblogic. Here are the steps I followed.
    1) Created a webservice within one Dynamic Web project
    2) Created a Client application
    3) Deployed both (by exporting war files from eclipse3.2) on Tomcat Apache locally on the same machine (localhost)
    4) Invoked client in the browser which allows to send simple request (Hello!) to Webservice
    5) Invoked webservice method call from the Client browser window
    6) Received success response back from webservice.
    Then, I deployed same war files on Weblogic 9.2 (different machine on the network)
    - Both got deployed successfully and reached to ACTIVE state on Weblogic and became ready to accept requests.
    - When invoked Client application on the browser, it worked.
    - From that client application browser window, I tried to invoke webservice call, I got the exception as below:
    exception: java.net.ConnectException: Connection refused: connect
    I will greatly appreciate any advice on this. Let me know if more information is needed.
    Thanks in advance.
    Gaurang Prajapati

    Have you given the correct ip or machine name in the client?

  • Error when invoking request from BPEL to SAP

    Hi
    I have problem when invoking request from BPEL project to SAP R/3.
    I use Oracle SOA Suite 10.1.3.1 and Oracle AS Adapter 10.1.3.1. I created BPEL project that call SAP service that I have created from Application Explorer. When I run The BPEL project, there is an error shown as below:
    <messages><input><Invoke_1_GetGLAccountBalance_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="input_GetGLAccountBalance"><GeneralLedger.GetGLAccountBalance xmlns="urn:sap-com:document:sap:business:Request">
    <COMPANYCODE>10</COMPANYCODE>
    <CURRENCYTYPE>10</CURRENCYTYPE>
    <FISCALYEAR>2007</FISCALYEAR>
    <GLACCT>61001010</GLACCT>
    </GeneralLedger.GetGLAccountBalance>
    </part></Invoke_1_GetGLAccountBalance_InputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>http://127.0.0.1:7777/orainfra/wsil/adapters/applications/GetGLAccountBalance.wsdl?wsdl [ GetGLAccountBalancePortType::GetGLAccountBalance(input_GetGLAccountBalance,output_GetGLAccountBalance) ] - WSIF JCA Execute of operation 'GetGLAccountBalance' failed due to: Error in processing the input document.; nested exception is:
         javax.resource.ResourceException: Error in processing the input document.</summary>
    </part><part name="detail"><detail>javax.resource.ResourceException: Error in processing the input document.</detail>
    </part></bindingFault></fault></messages>
    Anyone who know the reason, please give me some advice.
    Thank you in advance

    Hi,
    Please check the Logical system,Business system, configurations ,please see the below links
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    /people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
    Regards
    Chilla..

  • Transportation failed while sending a request from DEV - Quality

    Hi sdns,,,
                       I got an error while sending a request from DEV -> Quality...Am new to transportation.. mayi know.. wat was this error and wat kind of action i need to take over here...
    I got an error message like this,,
    Start of the after-import method for object type R3TR ELEM (Activation Mode)          
    Element 0QWSUMHUOOK19OOUIFCLB4T8C was copied from 'modified' to 'active'              
    Error when activating element 45HKXU7KAG6V1I0L1W3LWEDZC                               
    Element 3Z571P6G8RCDNR3NQAEI8S6YW is missing in version M                                                                               
    Start of the after-import method for object type R3TR ELEM (Delete Mode)              
    Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L                       
    RS_AFTER_IMPORT belongs to package RS                                                 
    The errors affect the following components:                                           
       BW-WHM (Warehouse Management)                                                      
    Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20070417044624
    Post-import methods of change/transport request I11K903499 completed                  
         Start of subsequent processing ... 20070417044621                                
         End of subsequent processing... 20070417044624                                   
    Answering getz really appreciated,
    Thanks & Regards,
    Aluri

    Hi,
    This error will come when your are transporting any Query/ BW elements to Production system.
    when there is element in the deve. class $TEM in your collected objects this error may come, so identify this elements and change this Dev.class to other package used in transportaion.
    To change all the elements to common dev. class first collecting the elements using transport connection. secondly, using the Pencil button at the menu of trasnport change to required dev.class.
    you can change individaul elements also.
    Regards,
    Vish.

  • Sending SOAP request from XI and writing a scheduler for this

    Dear XI Experts,
    My scenario is as follows.
    We have two landscapes
    1)     XI, R/3
    2)     Client System(Remote, Other than SAP)
    Now we have to pull the data from client system using WSDL (There will be one method for pulling the data in the WSDL file). The WSDL is provided by the client. We are importing that WSDL as external definition in Integration Repository and implementing the scenario “SOAP to XI to RFC” and configuring it Integration Directory.
    Remember the client will not send the data to XI. Only we have to pull the data as mentioned above.
    Problems:-
    (i)     How to send SOAP request to the client using XI only?
    (ii)     How to write a scheduler for this?
    please help us.
    Thanks...
    Praveen Gujjeti

    Ur Suggestion
    "My proposition looks like that. in R/3 you have scheduled RFC call in some program. This RFC calls XI and XI is calling using SOAP adapter your client. Then response go back to your RFC and you can handle this data."
    As you mentioned, I am not scheduling any RFC call in R/3. If you go through my first query u can find two points where I am having some doubts......
    How to send SOAP request to the client using XI only? Is it possible to send a SOAP request from XI?
    If so,
    (ii) How to write a scheduler for this? So that it will invoke the webservice and get the data from client application(system)

  • I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

    I pull fiftyfour bytes of data from MicroProcessor's EEPROM using serial port. It works fine. I then send a request for 512 bytes and my "read" goes into loop condition, no bytes are delivered and system is lost

    Hello,
    You mention that you send a string to the microprocessor that tells it how many bytes to send. Instead of requesting 512 bytes, try reading 10 times and only requesting about 50 bytes at a time.
    If that doesn�t help, try directly communicating with your microprocessor through HyperTerminal. If you are not on a Windows system, please let me know. Also, if you are using an NI serial board instead of your computer�s serial port, let me know.
    In Windows XP, go to Start, Programs, Accessories, Communications, and select HyperTerminal.
    Enter a name for the connection and click OK.
    In the next pop-up dialog, choose the COM port you are using to communicate with your device and click OK.
    In the final pop
    -up dialog, set the communication settings for communicating with your device.
    Type the same commands you sent through LabVIEW and observe if you can receive the first 54 bytes you mention. Also observe if data is returned from your 512 byte request or if HyperTerminal just waits.
    If you do not receive the 512 byte request through HyperTerminal, your microprocessor is unable to communicate with your computer at a low level. LabVIEW uses the same Windows DLLs as HyperTerminal for serial communication. Double check the instrument user manual for any additional information that may be necessary to communicate.
    Please let me know the results from the above test in HyperTerminal. We can then proceed from there.
    Grant M.
    National Instruments

  • How to send EDI from WCF adapter to WCF service

    Hi,
    1. I have created an orchestration which is published as WCF service.
    2. I have created an orchestration which receives an XML from WCF client and process it.
    3. I have created a WCF dynamic send port.
    Problem: From this dynamic send port, I want to send EDI file to a WCF service that will receive this EDI file. How can I achieve this. Below are my concerns:
    -> For creating this WCF service, I need to know the contract of Biztalk WCF adapter which sends EDI file.
    Thanks ...

    Hi,
    How can we create WCF service to receive the EDI sent by the BTS. What contract should be used for receiving this EDI file in WCF service.
    What changes have to be made in the orchestrations to send the EDI file to the WCF send Dynamic port. Below is the code i am using.
    EDIOutboundPort(Microsoft.XLANGs.BaseTypes.Address)="URL Address";
    EDIOutboundPort(Microsoft.XLANGs.BaseTypes.TransportType)="WCF-basicHttp";
    Please correct me if i am wrong
    Thanks 
    "How can we create WCF service to receive the EDI sent by the BTS. What contract should be used for receiving this EDI file in WCF service" - This is two different questions.
    "How can we create WCF service to receive the EDI sent by the BTS"  - Using BizTalk WCF Services Publishing Wizard, the wizard would ask for the "Create BizTalk receive locations in the following application " for creating
    the receive location for the message published to the exposed WCF service. Through this receive port/location, the service would receive the message.
    In this case, I am not sure why do you want to expose the Orchestration as WCF Service when you want to send message to this Orchestration/WCF service (which after converting from Orch) through another orchestration. You could either use call/start orchestration
    to send message from one to another.
    "What contract should be used for receiving this EDI file in WCF service" - may be this question is not correct. You have created a Orchestration which you exposed as WCF service. So while creating the Orch you know the type of message this Orchestration
    is bound to, so use the same contract. Or as mentioned in my earlier reply, use "Consume WCF wizard" to consume the WCF service which would create the web message for you.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Problem in sending Email notification from BPEL

    Hi,
    i am trying to send email from BPEL using Email activity.Using SoaSuite10.1.3.3
    i configured the ns_emails.xml file properly as below.
    when i run the process, it is executing fine without any error.
    but i am not receiving any mail.
    even i applied patch set p6148874 also.
    below pasted is the ns_emails.xml file.
    <EmailAccount>
    <Name>Default</Name>
    <GeneralSettings>
    <FromName>Oracle BPM</FromName>
    <FromAddress>[email protected]</FromAddress>
    </GeneralSettings>
    <OutgoingServerSettings>
    <SMTPHost>domain.com</SMTPHost>
              <SMTPPort>25</SMTPPort>          
    </OutgoingServerSettings>
    <IncomingServerSettings>
    <Server>domain.com</Server>
    <Port>110</Port>
    <Protocol>pop3</Protocol>
    <UserName>ckommalapati</UserName>
    <Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">Chandu@1205</Password>
    <UseSSL>false</UseSSL>
    <Folder>Inbox</Folder>
    <PollingFrequency>1</PollingFrequency>
    <PostReadOperation>
    <MarkAsRead/>
    </PostReadOperation>
    </IncomingServerSettings>
    </EmailAccount>
    Even i tried adding <AuthenticationRequired> details to the above and its not working.
    i restarted the server after modifications.
    i tried pinging the SMTP server of my domain, and its connecting successfully.
    Could any one suggest me the solution for this problem.
    is there anything extra need to be configured for this..?
    Thanks in advance.

    Hi, ravigali :
    Following are some steps I take to set Email notification in BPEL:
    A important thing: get the right parameters of your Email server.
    Step:
    1. Alter ns_emails.xml (in D:\soft\SOASuite\product\10.1.3.1\OracleAS_1\bpel\system\services\config directory), an example is as following:
    <EmailAccounts xmlns="http://xmlns.oracle.com/ias/pcbpel/NotificationService"
    EmailMimeCharset=""
    NotificationMode="EMAIL">
    <EmailAccount>
    <Name>Default</Name>
    <GeneralSettings>
    <FromName>*Your Name*</FromName>
    <FromAddress>*Your Email: ***@***.com*</FromAddress>
    </GeneralSettings>
    <OutgoingServerSettings>
    <SMTPHost>*mail.***.com*</SMTPHost>
    <SMTPPort>25</SMTPPort>
    </OutgoingServerSettings>
    <IncomingServerSettings>
    <Server>*mail.***.com*</Server>
    <Port>993</Port>
    <Protocol>IMAP</Protocol>
    <UserName>***@***.com</UserName>
    <Password ns0:encrypted="false" xmlns:ns0="http://xmlns.oracle.com/ias/pcbpel/NotificationService">***</Password>
    <UseSSL>true</UseSSL>
    <Folder>Inbox</Folder>
    <PollingFrequency>1</PollingFrequency>
    <PostReadOperation>
    <MarkAsRead/>
    </PostReadOperation>
    </IncomingServerSettings>
    </EmailAccount>
    </EmailAccounts>
    Note: the detail explain of every XML element is in http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28982/service_config.htm#sthref324 (2.2.1 Configuring the E-mail Server)
    2. Add the following property to wf_config.xml (in D:\soft\SOASuite\product\10.1.3.1\OracleAS_1\bpel\system\services\config directory):
    <property name="oracle.bpel.services.notification.publisher_interval" value="1" />
    Then the BPEL server will send notification every 1 minute. More detail about this configuration to see http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/notif.htm#sthref1678 (14.2.1 Reliable Notification Service).
    3. Re-start all SOA Suite services. (opmnctl startall)
    After the BPEL process invoke any E-mail notification activity and if we can’t receive any E-mail notification, we need to check the BPELNOTIFICATION table (ORABPEL database schema). And delete any error data in this table, then correct the E-mail notification setting through above steps and re-start all SOA Suite services.
    Thanks,
    Melody

  • Canvas disappear on sending multiple requests specifically from IE 11

    I have a page which displays few javascript charts on it. I am using RGraph chart API to generate charts. The charts are been generated from a separate Ajax call.
    The page is working fine with IE 7, 8, 9 and 10. Then recently I have upgraded to IE 11. After upgrade the page is not working as intended. On performing refresh operation for about 3-4 times, section of some charts are been disappers. It displays
    blank section instead of chart. And random charts gets disapper. It is not fix that some specific charts will fade away.
    And when this issue occur, all the CSS on the page goes messy.
    I have checked for any javascript related error generated or not. But I didn't found any javascript error on the console.
    I have checked from development tool. The canvas tag is available, bit it does not display on the page. It shows a blank section instead.
    Any idea why this is happening?
    I have moved this question from IE 11 Community Support Forum. Here is the link of the forum. 
    http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1/canvas-disappear-on-sending-multiple-requests/c433cf9b-fb82-48f1-8554-ebb3354795fe

    I have a page which displays few javascript charts on it. I am using RGraph chart API to generate charts. The charts are been generated from a separate Ajax call.
    The page is working fine with IE 7, 8, 9 and 10. Then recently I have upgraded to IE 11. After upgrade the page is not working as intended. On performing refresh operation for about 3-4 times, section of some charts are been disappers. It displays blank
    section instead of chart. And random charts gets disapper. It is not fix that some specific charts will fade away.
    And when this issue occur, all the CSS on the page goes messy.
    I have checked for any javascript related error generated or not. But I didn't found any javascript error on the console.
    I have checked from development tool. The canvas tag is available, bit it does not display on the page. It shows a blank section instead.
    Any idea why this is happening?
    I have moved this question from IE 11 Community Support Forum. Here is the link of the forum. 
    http://answers.microsoft.com/en-us/ie/forum/ie11-iewindows8_1/canvas-disappear-on-sending-multiple-requests/c433cf9b-fb82-48f1-8554-ebb3354795fe
    Hi,
    In order to get your issue solved more efficiently, I would recommend you post another thread in
    https://forums.asp.net forum to get dedicated supports, since based on your description, you are having this issue with your web applications and that forum is for web development issues.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Send Data from BPEL to BAM

    Hello, I have problem right now. I tried to send data from bpel to BAM (without enterprise link) but It failed. Then I found error like this:
    java.io.IOException: URL is invalid /OracleBAMWS/inspection.wsil [407]
         at com.collaxa.cube.engine.sensor.sa.publisher.bam.BAMServerConnection.testConnection(BAMServerConnection.java:289)
         at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamEndpoint.testEndpoint(BamEndpoint.java:444)
         at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamEndpoint.testConnection(BamEndpoint.java:373)
         at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamEndpoint.init(BamEndpoint.java:119)
         at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamDataObjectMetadata.pingBamAndFlushExceptionQueue(BamDataObjectMetadata.java:221)
         at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamJob.pingAction(BamJob.java:69)
         at com.collaxa.cube.engine.sensor.sa.publisher.bam.BamJob.execute(BamJob.java:58)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:191)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:516)
    I don't know why it check in 'OracleBAMWS', I tried http://localhost/oraclebam/OracleBAM/inspection.wsil and it works, but when I tried http://localhost/oraclebam/OracleBAMWS/inspection.wsil the page can't be found. How to fix this? And I want to know where 'OracleBAMWS' declaration come from?
    Just for info, I'm using version 101330.
    thx

    most likely your BPEL and BAM servers are not at the same version level. if your BPEL is 10.1.3.4, your BAM must be 10.1.3.4 as well.

  • Sending attachment from bpel process

    Hi,
    Is there a way to send the file read through the file adapter to be sent as response from bpel process to ADF ?
    I do not want to read the contents of the file. Its just that I need to read the file from a directory through file adapter and send that attachment as a response from bpel process.
    Regards,
    Stalin

    Thanks Neeraj. Need a clarification on fetching the doc from the file system.
    Since my process will be invoked from ADF, I cant have Read File Operation option in the file adapter to read the file from the directory. Is it possible to fetch the file using syncread operation ? As I said before, I do not want to read the content of the file, just the file alone is enough.

  • I have a new company and I am running everything on my Mac(s). I would like to set up my iCal to send calendar requests from my company address. Right now it is sending through iCloud which is not the email that I want to be sending the calendar requests.

    I have built the business website using WordPress. I have BlueHost as my email client and everything is working fine. I am now faced with a problem setting up my iCal appointments. Does anyone have a work-around? Right now my iCloud (gMail address) is what is sending the requests.

    I don't remember in 10.4.11, but Parental Controls did allow OKing Mail or not in 10.5.8...
    BTW, 10.5.8 can be installed on slower Macs, I have it on a 450 MHz G4...
    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Classic/OS9 Apps no longer supported.
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
    There are workarounds if the 867MHz CPU is the only hangup...
    http://sourceforge.net/projects/leopardassist/
    http://lowendmac.com/osx/leopard/unsupported.html

  • Attachment from BPEL

    Hi all,
    I need to send an attachment from BPEL to B2B.For that i found that 'ATTACHMENT' element in IP_MESSAGE_TYPE is used.
    But i dont know how to send the attachment.My attachment is stored in the database and am retreiving it in BPEL using dbAdapter, therfore my filedata is in base64 format.I am using RosettaNet protocol.Without attachment i was able to create RosettaNet message.
    I tried sending the base64 message directly to the ATTACHMENT element in IP_MESSAGE_TYPE but b2b was not able to build RosettaNet message.
    Can anyone help me in this. Or can anyone tell me how the ATTACHMENT element in IP_MESSAGE_TYPE used correctly

    Please follow the link http://www.b2bgurus.com/2007/11/attachment-feature-in-rosettanet-using.html
    provide the path of attachment if it is base64 encoded document.
    If the use case demands to read the content from database and not from file system , please raise an SR.

Maybe you are looking for

  • Documents folder is too messy!!

    Hey, I was curious if there is a way to decludder the documents folder of all the apps folders in it, only keeping my actual "documents." Thanks!

  • Installation package could not be opened

    can't download itunes as of 3/30/07. my ipod6 was stolen. bought another from apple. now can't download. "this installation package could not be opened" following "solutions" have not worked -1)start/control panel/quicktime/audio/devices/de-select sa

  • Using an external hard drive to store and edit videos?

    Hi I have read many articles that suggest placing all video projects/events in an external hard drive to save space on my Mac Book or Mac Air. I just ordered this: http://www.amazon.com/Western-Digital-Passport-Ultra-Portable/dp/B00E055H5O/ref= sr_1_

  • Gdr2 for lumia 520

    any idea when the gdr2 update(coupled with amber) is gonna be available for Lumia 520. Also what changes does it include?

  • Error in BAPI_ENTRYSHEET_CREATE

    Hi, I am uploading data through BAPI_ENTRYSHEET_CREATE to create service entry sheet. we have tested the same through se37 and from there it is working fine. but when test the same throgh program it is giving the SES number but in return it is saying