Send WP_PLU03 to External system if article is created from WPMA

Hi all,
I have a requirement like this.
If any article is created from WPMA transaction. WP_PLU03 idoc should generate and trigger to external system ( XI ) automatically. i am able to send through we19,but i want it from WPMA transaction automatically.
Thanks in advance,
Ramesh.

need to use change pointers or
use a programe to send.

Similar Messages

Sending mail to external system in sap 4.6c

Hi WF experts,
We are configuring sending mails to external system in sap4.6c.
sxdump20.exe is kept on the frontend and created RFC destination with path to sxdump20.exe.
same RFC destination is given while configuring in SCOT trxn.
From SAP, mails are successfully sent and getting message in SOST as delivered to recipent.
But recipent is not receiving mails in his inbox ( outlook express,gmail,hotmail etc ).
Any solution from you will be of great help.
simha

Hi,
Make sure that the mail sent from SAP 4.6C are not declared as "Bad Mails" at your Mail Server/SMTP Gateways, possibly due to some technical reason. (such as sender address is not correct, any other SMTP errors, etc...etc.).
Ask your network/system admin to verify it.
Regards,
Bhavik G. Shroff

Questions concerning HowTo send IDoc to external system

Hi guys,
well i want to send and receive IDoc from an external system.
The other side of the communication now needs information from me what kind of parameters i can give to connect both systems. Also i need some informations concerning this.
I gonna use IDoc-Tunneling in XI. Because of sending data to the ext. System i need a RFC-Connection of TCP/IP?! But what kind of program do i have to start at other side (see Technical settings).
- Special to XI i have to configure a third party system in SLD. Do i need the system-parameters from the ext. System?
- in ID i have to configure PARTY!? Right?!
How to load external meta-data? is it possible via IDX2 by using the TCP/IP-RFC?
Perhaps somebody can give me a road map on which data i need from the ext. system and what i can give to the admin of the ext. System for sending IDoc to XI?!
br Jens

By IDoc-Tunneling i am thinking of just putting the IDoc through XI without transformation in XML (like in one blogs of Michal). Because of this blog there seems only to be one step in IR - import IDoc. in ID there are the mandatory steps.
But if i want the ext. Admin to tell what parameters i need to communicate with the ext. system i have doubts in telling him just the IP and perhaps a program which we have to start via RFC configured in XI.
regards

Send routings to external system using ALE

Hey guys,
I am using ECC 6.0. Under tools->ALE->Master Data Distibution-> Logisitcs-> Bill of Material -> Routings i tried to send a routing to an external system which is already setup for many other types of master data. I get the error "Transaction code /SAPMP/SEROU cannot be executed" . I do not know how to fix it.
I also tried using transaction POIM but did not understand how to send the BOM along with routings and work centers in that T-code. I am able to send materials through that screen successfully but nothing else. If someone could help me out I would appreciate it.
Thanks in Advance.

AN issue regarding " Long Texts "(texts in accounting document).
1) Am using RFBIBL00( Direct Input method ) to transfer Accounting Documents.
2) I need to Update "Texts" both Header & line item for accounting document using Direct input method.
3)I tried to append a custom 'Z' include, that calls SAVE_TEXT function module, in program RFBIBL00 to save texts for the respective Accounting document.But the performance is very low.
4)If I use direct input program /SAPDMC/SAP_LSMW_IMPORT_TEXTS or /SAPDMC/SAP_LSMW_SXDA_TEXTS how will it save texts to document, before it is created , since we are still in LSMW that just generates .CONV file , but it might not create account document number, once the .Conv file goes to RFBIBL00, account document gets generated .
5)another major issue am encountering is , if one of a document fails (error) how about updating texts.How i send text to BDC in this case.
My queries are :
a) Is there any other way to update texts using Direct input method ?
b)Can I integrate, direct input program RSTXLITF with RFBIBL00, is that feasible, will i be able to save texts with out any performance issues ?
I would really appreciate if am given some suggestions or solutions for the above case.
Thanks alot in Advance !

How to send Mail to external system - Check the program ?

Hi all,
      The following is a ABAP Program to Send a mail to external mail id. this program is not showing error but when executed it say "No message sent"
what i've to do to overcome this hurdles. if any solution or prerequisites then '
please give me a solution.
PARAMETERS: psubject(40) type c default 'Hello',
            p_email(40)   type c default '[email protected]' .
data:   it_packing_list like sopcklsti1 occurs 0 with header line,
        it_contents like solisti1 occurs 0 with header line,
        it_receivers like somlreci1 occurs 0 with header line,
        it_attachment like solisti1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
data:   it_message type standard table of SOLISTI1 initial size 0
                with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*&      Form POPULATE_MESSAGE_TABLE
      Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform.                    " POPULATE_MESSAGE_TABLE
*&      Form SEND_EMAIL_MESSAGE
      Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform.                    " SEND_EMAIL_MESSAGE
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
      submit rsconn01 with mode = 'INT'
                    with output = 'X'
                    and return.
endif.
endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
Thanks in Advance,
    Manian

Hi,
   I can get the idea but i'm asking u about the prerequisites such as SCOT - sap connect or something else has to be done before executing the program.
if i need any pls let me know?
I've tried the program but it say " No Message sent" and i didn't get any mail to mail id.
thanks in advance,
Manian.

How to send mail to external system

Dear WF Experts,
I have done all the work flow setting in project system module , so that if budget exceeds bya certain %, then mail should go to concern person and its working fyn.
Now i want that same mail to go to some external MS-outlook id.
I tried by putting the mail address in Setting->office setting->automatic forwarding and entered the address.
But the mails are not getting transfered and in SOST transaction i can see the error message like 'Message cannot be transferred to node SMTP due
connection error (final)'
can anybody suggest, where may b d mistake.
thnx in adv.
ashis

Hi Ashis,
This is a very common problem and if you search the forums thoroughly you would find some very good replies to it.
The error that you are getting is because there is some error in the SMTP connectivity established in the system. Ask your basis team to check the SCOT settings.
Check if the correct SMTP host and port been specified in the SCOT settings.
Also check if OSS note 455140 has been applied to your system.
Regards,
Saumya

Two load balanced server sending requests to external system on different protocol

Hi,
I have two loadbalanced OEG servers (server A and server B) with same endpoint configurations in envsetting.props. But when requesting the service, it is creting different URI in both servers. In one of server (server A)it sets URI with following details :
DEBUG   30/Mar/2015:07:29:34.356 [92b0e940]     Set host='abc.tdc.dk'
DEBUG   30/Mar/2015:07:29:34.356 [92b0e940]     Set port='80'
DEBUG   30/Mar/2015:07:29:34.356 [92b0e940]     Set scheme='https'
and fails with following error : ERROR   30/Mar/2015:07:29:34.370 [92b0e940]         [SSL_connect, 0x1220]: error - SSLv2/v3 read server hello A.
However another server (server B),sets URI as :
DEBUG   30/Mar/2015:07:29:34.356 [92b0e940]     Set host='abc.tdc.dk'
DEBUG   30/Mar/2015:07:29:34.356 [92b0e940]     Set port='80'
DEBUG   30/Mar/2015:07:29:34.356 [92b0e940]     Set scheme='http'
and successfully processes the request.
So can you please help here to know even if we are using same endpoints configuration (abc.tdc.dk ) and port (80) on both the servers , then why the URL is set as http on one of server and https on another.
Thanks !!!
Akshay

Hi
Thanks for immediate respose. I tried the ping/acknowledgement example in the biginning itself. It doesn't work. I also tried by changing the agents ( to respective values suitable for my systems) of that example. Then also it failed. The error in that case also same. The message will not propogate from the out going agent.

How to send email to external users using the distribution list from workflow

I have created distribution list in SO23 with external email addresses.
How I can use distribution list in "Send Mail component" or I should use another component?
It works fine for a single email address. And distribution list works fine when I use it via SBWP.

Hi,
Take activity step instead of Mail step. User fm SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
And use fm SO_DLI_READ_API1 to find list of user from distribution list. You can find how to use this fm in rule 30000012

Send WP_PLU03 from WPMA ...

Hi all,
I have a requirement like this.
If any article is created from WPMA transaction. WP_PLU03 idoc should generate and trigger to external system ( XI ) automatically. i can able to create and send through we19,but i want it from WPMA transaction automatically.
Thanks in advance,
Ramesh.

Hi Michal,
Actually i didn't get what excatly you said,
but , once run the programe from se38 for
<b>Initialization (RWDPOSIN)</b>
i have get the follwing output.
Processing Status : 1
Recipient: HYD1
IDocs created
     Merchandise cate IDoc no. 0000000000200175structure WPDWGR01with 000048 segments created
     Set assignments: IDoc no. 0000000000200176structure WPDSET01with 000003 segments created
     Exchange rates: IDoc no. 0000000000200177structure WPDCUR01with 000003 segments created
     Trigger file for status ID: 00000000000138
     does not have to be created       No messages needed
for <b>Change message (RWDPOSUP)</b> out put is
Preparation statistics
Recipient: HYD1       A total of                  0 change documents were checked
Analysis and preparation
IDocs created
     Exchange rates: IDoc no. 0000000000200178structure WPDCUR01with 000003 segments created
     Trigger file for status ID: 00000000000139
     does not have to be created       No messages needed
Overall Statistics of Processing
Total No. of All Stores Processed:                            1
Total Runtime of the Processing:                              1 Seconds
Total No. of All Segments Processed:                          3
Average Segment Throughput:                               0.333 Sec. per Segment
Hi Gourav Khare,
Do i need to maintain Distributuion model for my purpose?
ANY FURTHER help will be appriciated.
Regards,
Ramesh.

Send HU structure to an external system through an idoc

Hi,
I need to send the description of an HU (Sub HUs and materials to an external system).
Do you know if there is any standard idoc type allowing to do that.
I tried to use idoc HU_CREATE or HU_PROCESSOUTPUTDIRECT but I think none of them will allow me to do that because there is no function module in outbound mode that I can use with them/
Any ideas?
Thanks in advance.
Regards

Hi,
In order to send data to external system and if you have an middleware used in your landscape then
create logical system for that system and associate the port with RFC destination (based on middleware used type 3 ot type t) can be used and idoc can be sent to middleware and middleware can take care of sending the data to the external system by converting it into required format..
These are normal scenarios for which Middlewares are used for integration..
HTH
Rajesh

Extract data from SAP and send to external system via Webmethods & IDOC's

Hi,
We need to Extract data from SAP and send to an external system via Webmethods middlewear using IDOCs. I have never used webmethods before and would like to know more about how to implement this scenario. I have used IDOCS in an EDI scenario before but not used it along with WebMethods.
Any pointers would be of great help. Thanks

If you have already ABAP programs /BAPI's in place then try to develop RFC interface and write some back ground programs to scheudl BAPI's and develop scenario but you need to implement error handling , data validation in PI mapping level.
or
take help from ABAPer to design in ABAP like writing Proxy program to pull data and send it PI.
if you are dealing with master data bit risky(correctness) but can be achived using PI.

Sending IDOC creditor data to an external System

Hello,
I have a scenario where I send the creditor data from SAP to non-SAP System.
For SAP System as a target I can use the TA BD14 to do this. This is working fine. But this is not my case, I need to send on non-SAP System.
So what is the right solution for sending to an external non-SAP System? With BD14 I can only send to logical system what for me is only SAP System (right?). My workaround solution is to maintain the external non-SAP System also as logical system und choose the port as Data-Port (data will be saved on file system). Is it the best solution or there are more better known?
Where can I obtain more knowledge on intergration of external non-SAP Systems? The documentation that I have covers in 95% the issue of SAP Systems. Intergration of non-SAP Systems (or sending data to non-SAP Systems) ist more difficult as I see.
Thank you in advance. Best regards.
Michael
Edited by: Michael Swistowski on Mar 15, 2011 12:52 PM
Edited by: Michael Swistowski on Mar 15, 2011 12:53 PM
Edited by: Michael Swistowski on Mar 15, 2011 12:53 PM

Hi,
In order to send data to external system and if you have an middleware used in your landscape then
create logical system for that system and associate the port with RFC destination (based on middleware used type 3 ot type t) can be used and idoc can be sent to middleware and middleware can take care of sending the data to the external system by converting it into required format..
These are normal scenarios for which Middlewares are used for integration..
HTH
Rajesh

How to send an event to external system?

Hi
I am facing problem in sending the event to an external system.
Initially I created 2 workflows with different itemtypes. One has send event and other has receive event. This works perfectly when I use the WF_OUT and WF_IN agents of the same system.
Now, I signup two workflow server ( running in two PC, on Oracle 8.1.7 ). I have followed the following steps.
a. creating database links.
b. Signing up the system.
c. changing the system status to enabled in Global Preference Page.
In the event subcription in System1 is local, Out agent is Wf_OUT of System1 and the TO Agent is Wf_IN of System2. There is external subscription for the same event in System2 without Agents.
When I run the workflow with send event, the event message goes to WF_OUT agent with the status Ready, but never propogates.
What could be the reason? Can anyone help me?
Thanks a lot.

Hi
Thanks for immediate respose. I tried the ping/acknowledgement example in the biginning itself. It doesn't work. I also tried by changing the agents ( to respective values suitable for my systems) of that example. Then also it failed. The error in that case also same. The message will not propogate from the out going agent.

Send Storage Bins to external system (change pointer, change document, ...)

Hello,
I need to send to my external system the storage bin modifications, namely, insert and delete information.
I haven't found any User Exits ou BADIs to the LS01 transaction.
I'm trying to do this using change pointers, but it doesn't seems to exist a standard way to this either, so I've created a custom Change Document for the LAGP table, but there's still no records in the CDHDR or CDPOS tables.
Is there a way to automatically generate this records without programatically calling the Change Document associated FM?
What are the options that I have to do this?
Thanks in advance,
Rui

Hello Rui,
perhaps you can use DBTABLOG (Think about data volume and performance).
http://help.sap.com/saphelp_40b/helpdata/en/34/60b6bfae724effe10000009b38f91f/content.htm
Best Regards, Dirk

Send price conditions to external system

Hello,
I would like to send the price conditions to a non SAP system. The IDOC COND_A02 seems to be the solution for sending the price conditions modifications to this system but is there a programm to send an initial set of idocs with all conditions (like RBDSEMAT for materials)? I cannot find any.
Thanks in advance for any help provided.
Julien

Julien,
You can send prices to external system from pricing reports, transaction V/LD. For example, I used this to send sales prices to an external system using pricing report 15. Here you can enter your material selection criteria including, condition type. This will generate a report which you can then send to external systems. I apologize, but I do not remember the menu path from the report result off hand.
Ram,
Make sure you have activated change pointers for message type COND_A, create or change a price and excute RBDMIDOC for COND_A.

Send WP_PLU03 to External system if article is created from WPMA

Similar Messages

Maybe you are looking for