Sending e-mail from specific senders straight to Trash

Is there a way to flag e-mails from specific senders to go straight to the trash? There are certain senders who constantly send e-mails that I invariably trash. Currently they all go to the Junk mail folder where I have to manually delete them. If I could flag all incoming e-mails form theses senders to go straight to the trash it would be a real help.

You can configure a rule to check incoming mail and route messages to a destination mailbox of your choice. Open Mail preferences, click on the Rules icon in the toolbar.

Similar Messages

Send e-mail from specific user

Hello!
I'd like to create two different sending from SAP System - the first is monthly and the second is everyday.
May I schedule jobs either send mail from concrete SAP Users?
Otherwise Everyday job also can send preset messages from monthly job...
SAP Release: NW 2004
Thanks and Regards,
A.M.

Hello A.M.,
You cannot schedule the job to send emails from specific users. If the send job is configured to run for INT, for example, it will send all emails with status 672 in SOST.
One thing you can do is to set waiting time in the emails. To do this, go to SOST, select the emails you want to set a wait time and click on the button "Set Wait Time" (it's a clock icon next to the delete button).
Regards,
Tiago

Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may be preventing delivery

HI,
We are getting following error message for all users while sending mail to external but we able to receive mail from internet.
Your message wasn't delivered due to a permission or security issue. It may have been rejected by a moderator, the address may only accept e-mail from certain senders, or another restriction may
be preventing delivery.

Hi,
Please follow Luke and Shelly’s suggestion to check your SPF record and Send Connector configuration. Also you can post the complete NDR message(with NDR status code) here for further analysis.
If there is any updates, please feel free to let us know.
Thanks,
Winnie Liang
TechNet Community Support

HT4623 i cannot send e-mails from optonline from my iphone 4s

I cannot send e-mails from my iphone 4s any ideas as I have verified the set up with optonline and everything seems correct

can you be a little more specific - what happens when you send the mail? error msg?

How to Send e-mail from APEX

Hi all,
We are using Apex 3.1 on Windows Platform,
Could any one please provide the Steps for Configuring " Sending e-mail from APEX "
many thanks
Edited by: khaja on Jan 18, 2009 11:10 AM

Hello,
>> Could any one please provide the Steps for Configuring " Sending e-mail from APEX "
The APEX document is including specific details on that - http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10499/advnc.htm#BABJHJJF .
Also, the following thread might also help you in some general information and example - HTMLDB_MAIL.SEND P_BODY .
Regards,
Arie.

Sending OUTLOOK mail from Workflows

HI ,
Please help me in getting out of this error encountered during a sample workflow thing.
Here is the requirement I need to send a OUTLOOK mail from SAP.If the user accepts the workflow task then mail need to send a recipient ,stating that he accepthed the request.
Below I designed that task.
In send Mail step I added the recipent thing as stated below.But I was unable to send mail to OUTLOOK .In this I am not even getting notification in my SBWP in SAP INBOX.
How should i send the mail to OUTLOOK from SAP.

Hi Ranjith,
Here's some friendly advice for you:
- don't post the same question twice
- if you get a specific error message ('wait for communications service'), try investigating it yourself by googling it.
In this case, your issue is almost certainly with your mail setup - you can confirm this by trying to send a mail from SBWP to an external address. If so, it's a Basis issue, not workflow. You can safely hand it off to your Basis team.
cheers
Paul

TS3276 I don't receive email from specific senders. Any idea why?

I do not receive email from specific senders. I have to enter the name of a person I think might have sent me something under Search at the top right, in order to see if they have sent me email. Yet I receive email from most senders. Cannot explain this, finding it very frustrating.

several possibilities:
It could be rule, as MrHoffman suggests
it could be that those senders have been flagged as junk mail by Mail.app on your machine
It could be that they are flagged as junk mail by your mail server

E72- Unable to send e-mail from work mailbox

I am unable to send e-mails from my work e-mail through my E72 although it receives perfectly. I have been in contact with Nokia via e-mail for the last 2 weeks and they have sent several suggestions to solve the issue but nothing is working. I have set-up my work e-mail on my husbands Blackberry with the same settings and can receive and send perfectly. From that I conclude there is no issue with the settings I have or my work e-mail but with
Nokia!! The latest 'help' I have received was to download a patch but I have no idea how to do this and get it onto my phone. So far Nokia have not replied to me.
Any suggestions how to get this to work would be greatly appreciated

If you're using a much older firmware, updating the phone would be a good idea. Find the Software Updates section of nokia.com and type your phone model. If you can't do an over-the-air update, download and install either the OVI Suite or the standalone Software Updater. This may hard reset the phone, so back up anything important with OVI Suite first.
Ignoring firmware for now, IMAP and URL's are like apples and oranges. If you work for a small company, the server may always be called " mail.mycompany.com", but IMAP will never use an HTTP or HTTPS prefix. URL's are typically associated with Microsoft Exchange servers. Within the email program, check Options -> Settings -> Mailbox settings -> Mailbox settings -> Advanced mailbox settings. Are "Outgoing email settings" set to something like
User authentication: Same as for incoming
Outgoing mail server: <compare to the setting for the Incoming server name; in a small company this will likely be the same>
Since you're getting far enough for the mail sever to reject your connection, the other settings should be fine as-is.
It does look like an authentication issue, so I'd say you're either hitting the wrong server or there's a bad username or password in there somewhere. If the Blackberry works with an IMAP connection, then you should be using the same server name(s), and user/password.
If all else fails, you can always try removing and readding the mailbox completely. Choose Menu -> Applications -> Email -> Settings -> <highlight your work account> -> Options -> Remove mailbox. And then set it up from scratch. I hope that helps a little!

Why can I not send e-mails from my e-mail account? I can receive e-mails. Not an iCloud account. It is a Bell Aliant account.

Why can I not send e-mails from my e-mail account? I can receive e-mails. It is not an iCloud account it is a Bell Aliant account. An account I pay for.
This is the second time in three months this has occurred. Bell Aliant suggested I contact Apple directly as the only option is to remove my e-mail account and reconfigure it. This will mean losing all my files. These files are very important as my account is a business account.
Bell Aliant thought perhaps it is an Apple problem and that Apple may better be able to remedy the situation without me losing my e-mail files.

Sorry ?
An Internet email provider losses all your Mail and it's Apple's fault ??
Did they explain how the app managed to delete all of your mail and then not even let you have access ?
If that was the case the app should still be able to access the empty folders.
I know there is often blame and counter blame in these situations but there are limits.
9:50 pm Friday; April 10, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Can not send e-mails from account but can receive

I have my e-mail account with ATT Yahoo.
I received an account verification notice yesterday from ATT and I responded and they said I was verified.
However after I did that I could not send e-mails from my Imac desktop but I am receiving them.
I spend 4 and a half hours, yes 41/2 hours with both Apple Care and ATT and they could not correct the problem. Both discussions were with upper tier support personnel.
Here are some facts that make this an odd issue:
(1)
I have other e-mail boxes from ATT and they can send and receive e-mails.
(2)
MY laptop can still send and receive e-mails from the e-mail account that is only receiving with my Imac.
(3)
All the settings are exactly the same and both Apple Care and ATT checked them.
Is there anybody out there that may have an answer ?
Both Apple Care and ATT blamed each other.
My concern is that today I received another e-mail trying to verify my e-mail address for another e-mail address from ATT.
I called ATT and they did not know why, I DID NOT open it up and trashed it.
ATT has put a filter on my other e-mail accounts and hopefully that will end any problems with them.
The account that has the issue is my main account and I cannot trust leaving it and am trying to avoid having to change it.
Greg

Hi Rachel, For what it will be worth, I was like a dog with a bone about this, so I decided to give it another go. I have success on both boxes. Here is what I did, I warn you now it was a lengthy process. Before you begin download all the upgrade steps from X.5.0 to X.5.6 as single stages ( for me the combo's did not work) and have them ready to use.
1st Backup all your mail to CD/DVD not on the box. Check for any unsent mails anywhere in the box and then throw out all of the mail bits that are anywhere on the system in any folder. 2nd Install & Archive, 3rd Start up from Install DVD and check/set permissions, reboot. Enter all your ISP details to mail, see if you can send a mail to yourself. If not dump all the mail you tried and the .plists, reboot and install next update in the series, enter all details as before, try and send etc. If this fails dump again and reboot install next update etc.
I started at X.5.1 and got to vX.5.4 before I got a result in that sys asked me if this server will do, I said yes and I got mail out. The server name was different that was offered but when all was over it showed as the correct one that it should be on port 995. I must add that I had the spinning cog wheel for quite some minutes before anything happened. I continued on this way for the rest of the updates. 1x1 until v.6 was reached. That was only on the G4, I now had to do it all again on the MacPro. This one was not so co-operative in that I had to do it twice, but now it also has Mail running. It is funny though that I had to reach X.5.4 on both machines before it came right. On the G4 I was using a retail disc and on the Intel the supplied for discs.
Others on here may have a better and quicker way, but for me this did work. I am sure that there is a problem in either the mail app itself or the production of the Master DVD's.
Whatever, good luck.

Sending a mail from oracle database

Hi,
I have a requirement to send a mail from oracle database.I use UTL_TCP package for this.Although my procedure is executed successfully,i dont get the mails in my inbox.Please help me to figure out a solution.
Thanks in advance....

Hi, you must use UTL_SMTP package for send emails, it has more performance and features for debug. You must look the next code, this is a example for send emails.
DECLARE
c UTL_SMTP.CONNECTION;
PROCEDURE send_header(name IN VARCHAR2, header IN VARCHAR2) AS
BEGIN
UTL_SMTP.WRITE_DATA(c, name || ': ' || header || UTL_TCP.CRLF);
END;
BEGIN
c := UTL_SMTP.OPEN_CONNECTION('smtp-server.acme.com');
UTL_SMTP.HELO(c, 'foo.com');
UTL_SMTP.MAIL(c, '[email protected]');
UTL_SMTP.RCPT(c, '[email protected]');
UTL_SMTP.OPEN_DATA(c);
send_header('From', '"Sender" <[email protected]>');
send_header('To', '"Recipient" <[email protected]>');
send_header('Subject', 'Hello');
UTL_SMTP.WRITE_DATA(c, UTL_TCP.CRLF || 'Hello, world!');
UTL_SMTP.CLOSE_DATA(c);
UTL_SMTP.QUIT(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
BEGIN
UTL_SMTP.QUIT(c);
EXCEPTION
WHEN UTL_SMTP.TRANSIENT_ERROR OR UTL_SMTP.PERMANENT_ERROR THEN
NULL; -- When the SMTP server is down or unavailable, we don't have
-- a connection to the server. The QUIT call will raise an
-- exception that we can ignore.
END;
raise_application_error(-20000,
'Failed to send mail due to the following error: ' || sqlerrm);
END;
Also review the next link for get more information about the UTL_SMTP packege.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_smtp.htm#sthref15587
Regards.

How do I set up my 3G to send/receive mail from MS exchange?

How do I set up my 3G to send/receive mail from MS exchange?

Welcome to the Apple Community.
If you can't get your mail to work on Snow Leopard after June 30, you might want to try one of these approaches
1. Configuring Mail in Snow Leopard
2. Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard

Why am I unable to send e mails from my IPhone or IPad and get message rejected from outgoing server, message placed in outbox

Why am I unable to send e mails from my iPhone, and get message rejected by server and message put in outbox. I have tried changing server ports but to no avail. I am not very technically minded so any suggestions in laymans terms please. This is a big problem as I work away frequently and need to answer e mails. This also happens when at home and on my own wifi.

Hey Pam3008
The article below will give some troubleshooting steps to resolve Mail issues.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How to Send a Mail From the Oracle Applications.

Hi,
I was assigned a task to send a mail from the front end i.e., from oracle applications.
but i have no idea.
i am working on oracle apps R12.1.1 and 10g reports.
First i have to create an rdf file and that rdf file i want to send as an attachment through mail from the apps.
Any Advice will be of great help and i will follow accordingly.
Thanks in Advance,
Regards,
Bharathi.S

Hi,
I was assigned a task to send a mail from the front end i.e., from oracle applications.
but i have no idea.
i am working on oracle apps R12.1.1 and 10g reports.
First i have to create an rdf file and that rdf file i want to send as an attachment through mail from the apps.
Any Advice will be of great help and i will follow accordingly.
Thanks in Advance,
Regards,
Bharathi.S

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

http://www.joshjacob.com/mac-development/tnef.php

Sending e-mail from specific senders straight to Trash

Similar Messages

Maybe you are looking for