Sending the same data to multiple receivers.

Hi,
In 7.1, I did a simple file-to-file scenario with mulitple receivers.I used only 1 Rcvr Det.(included multiple business components) and 1 Interface Det. without BPM and it works.I would like to know if there's any other way to send same data to multiple receivers without BPM and/or the approach used by me.
Thanks,
Vishal

Thanks all for your replies. I did multimapping as suggested by couple of you and it works. Since it is required to send to 7 or more systems and the no. of fields to be mapped is huge, multimapping is time-consuming. So I would like to know if there's any other approach.
@Ravi: can you please explain with more details regarding the approach suggested by you?
Can someone explain why and/or how a mapping executes multiple times if we have multiple receivers getting the same data?
And if there's any way to check(For Ex: Moni) if the mapping executed multiple times?
Thanks in adavnce,
Vishal

Similar Messages

How to use rule and send the same email to multiple recipents

Hi,
My requirement is to send the workitem to the multiple recipents. one of my reiend suggest me to use the rule but i don't know how to use that .
can any one of you suggest me how to use rule in workflow.
Also i want to send the same email to multiple recipent .how can i do it by using the multiline variable...please advice me with example if possible..
Note :- Is it necessary to saparate the email id with comma or i will add all the email next one another..
Please suggest.
Thanks in advance ,
Anand

Hi Anand,
I would suggest you first follow the guidelines of the forum and a little searching. One of your questions has been asked just a few threads below.
Regards,
Martin

Send the same message to two receivers with some time difference..

Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .P

Hi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury

IPhone keeps sending the same text message multiple times in a row.

My iphone (4s) keeps sending people the same text message multiple times (2-4) a few seconds inbetween. Sometimes it will tell me that there the message failed, but they still recieve it multiple times. I've already tried deleting the message tread and reset network settings. Nobody who has an iphone has said anything to me about it yet, only people with android.

It's a carrier issue. I have AT&T and had this issue with my friend (who had an Android) and my mother (who had a feature phone). Both of them have Verizon for service and I'm thinking the issue was on Verizon's end. They both just dealt with it as we tried all sorts of things to get this sorted out (other than contacting Verizon directly) and had no luck.
They've both switched to iPhones so it's a moot point for us now, at least.
~Lyssa

Did being able to use the same data in multiple apps get added?

In the new iOS 4.2, did Apple include the ability to use the same data, eg PDF files in multiple apps? I have several hundred PDF files that I want to use in three different apps.
Or is it still the same, that you have to load up (and use valuable space) the same data again and again for EACH individual app?
Thanks

I don't know but think it would mean the PDFs must be stored somewhere on the device itself (like on a computer). Then also the apps must be designed to use the files from there. So a change in the iOS wouldn't be all that's needed.

How do I send the same email to multiple addresses from my address book?

I need to send the same email to many people on a regular basis. I especially entered all my contacts in the address book. Now I find out that I can only click on one of my contacts email address to create a new message. But I need to send 1 email to about 50 people. How do I go about this?

Firefox has no email features, if you are using a webmail service in Firefox you need to ask the support for the webmail service. Any email features will be part of the webmail service.
If your question is about Thunderbird, you can ask in one of these forums:
* http://forums.mozillazine.org/viewforum.php?f=39
* http://getsatisfaction.com/mozilla_messaging

Sending the same email to multiple contacts from Contacts

do you know if this is possible and how to do it? thanks

Just type multiple addresses in the 'To' field in the email. If you use the same multiple addresses regularly, you might want to set up some groups in your Address Book.

How do I send the same email to multiple people?

I have created some folders in Mail and one has about 387 emails in it that I've received. How can I send one email out to all 387 of them without doing them all one at a time?
Thanks.

I believe you will have to use AppleScript or Automator to extract all the e-mail addresses from the selected messages, then add those to a new outgoing message. If you're not sure how to do that, try asking over on the [AppleScript forum|http://discussions.apple.com/forum.jspa?forumID=724].
Also, note that most e-mail servers apply limits to the number of different addresses you are able to send to at one time. Some have limits for single messages, limits per hour or per day, etc. Check with your e-mail provider to be sure this message will be sendable. And make absolutely sure all those addresses are on the Bcc line, otherwise everyone will be able to see addresses for everyone else you sent to, which will not be appreciated by some.

DMS need to send the same document to multiple content servers

Dear Experts,
We are implemeting DMS with three content servers(A,B,C locations).We have requirement that need document must save on 3 content servers and user can see document from any one of them.
As per understanding while create document ECC system ask which content server need to save,We can select one of content servers.
Kindly give me answers for below questions
- Is there any posibility to select multiple content servers which creating document?
- Is there any posiblity to shared repository for 3 servers?
Please advice on the requirement.
Thanks in advace.
Regards,
Santhosh.

Dear Santhosh...
for this kind of scenario SAP Provide
Content Servers and Cache Servers
Any number of content servers can be installed in different locations. The contents are transferred directly between the client and content server. A cache is used to store copies of documents when they are accessed for the first time. As a result, the documents can be accessed again more quickly, since the contents are taken directly from the cache. Caching, however, must not be confused with replication.
With caching, the original documents are stored in one location, namely on the content server. The copies in the cache can be replaced with newer content at any time.
Follow the link ..it will help you
http://help.sap.com/saphelp_nw04s/helpdata/en/02/804d3ccd6fba74e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/7f/fba637fcf7dc39e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/21/f36c11389511d5992200508b6b8b11/frameset.htm
for the installation process Content Servers and Cache Servers
follow the link
[SAP Content Server for Windows Installation Guide|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cfa73246-0a01-0010-71b4-bc21ccb45c99?quicklink=index&overridelayout=true]
or see this post...
Content Repository & Content Category
Regards
Tushar Dave

Accessing the same data from multiple threads

Hi
In the following program the task5 routine takes ~3s to complete, when I uncomment the t2 lines it takes 11s (this is on a quad-core x86/64 machine). Since there is no explicit synchronization I was expecting 3s in both cases.
public static int sdata;
public static void Task5()
int acc = 0;
for (int i = 0; i < 1000000000; ++i)
sdata = i;
acc += sdata;
[STAThread]
static void Main()
Stopwatch sw = new Stopwatch();
sw.Start();
Thread t1 = new Thread(new ThreadStart(Task5));
// Thread t2 = new Thread(new ThreadStart(Task5));
t1.Start();
// t2.Start();
t1.Join();
// t2.Join();
sw.Stop();
System.Diagnostics.Debug.WriteLine(sw.ElapsedMilliseconds.ToString());
Why are these threads blocking each other?

This is loosely a duplicate of https://social.msdn.microsoft.com/Forums/en-US/cd00284d-3da3-457e-8926-c490e7ca6d92/atomic-loadstore?forum=vclanguage
I answered you in detail over at the other thread.
But the short version is that the threads are competing for access to system memory, specifically at the memory location of sdata. This demonstrates how to spoil the benefits of not having to write-through from your CPU cache to system memory. CPU
Caches are wonderful things. CPU cache memory is WAY faster than system memory.

Multiple MM schedule lines for the same date

Hello All Gurus,
I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
02/11/2010 - 40
02/11/2010 - 40
02/11/2010 - 40
Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
Please let me know. I would be very much thankful to you.
Thanks and Regards,
Umakanth

Hi,
Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
Regards,
Dominik Modrzejewski

Multiple repeating SubForms binding to the same data node

Having multiple repeating SubForms binding to the same data node : In our documents, many times we need to display information from same table in multiple locations. For example, if document displays information of Insureds on one page and information of drivers on another page, we need to create a LiveCycle document with two SubForms. Each SubForm needs to have a repeating binding to CommonInsured element in XSD. LiveCycle Designer is not able to handle such case. We cannot have two subforms bound to the same node, ONLY in a case where repeating option is selected for data binding.
The only way I have found out is the following Javascript
//Get the data node from XML. You will find the code for this function in //JavaHelperFunctions library.
// InsuredDataRepeatingSubForm is a second subform.
//You need to manually add instances to this subform at the
//runtime and Insured data to each instance.
var insuArray = JavaHelperFunctions.getInsureds();
    var i=0;
    for( i=0; i<insuArray.length; i++)
       if (i>0)
var thesubform = this.InsuredDataRepeatingSubForm.instanceManager.addInstance(i);
              thesubform.InsuredName.rawValue = insuArray[i].fullName.value;
       else
               this.InsuredDataRepeatingSubForm.InsuredName.rawValue = insuArray[i].fullName.value;
Is there any way I can achieve directly using bindings since we are trying to minimize javascript that changes the layout of the form?
Thanks in advance!

Unfortunately not. I've spent countless hours/days trying to do the same thing. You have to use code. The form consumes all the data it can into the repeating elements until there is none left and it is not reused.
Here's a function I wrote just for that purpose. Feel free to use it:
function loadData(source,target){
target.setInstances(source.count);//set the target's subform instances to match the source's
for (var a=0;a<source.count;a++){//loop through each subform instance
var sourceSubform=source.resolveNode(source.name.substr(1)).all.item(a);
var targetSubform=target.resolveNode(target.name.substr(1)).all.item(a);
for (var b=0;b<sourceSubform.nodes.length;b++){//loop through the children of each
   if (sourceSubform.nodes.item(b).className=="field" && targetSubform.resolveNode(sourceSubform.nodes.item(b).name)!=null)//check for matching fields
    if (typeof(targetSubform.resolveNode(sourceSubform.nodes.item(b).name).value.exData)=="undefined" ||
     typeof(targetSubform.resolveNode(sourceSubform.nodes.item(b).name).value.exData.body)=="undefined")
     targetSubform.resolveNode(sourceSubform.nodes.item(b).name).rawValue=sourceSubform.nodes.item(b).rawValue;
    else
     targetSubform.resolveNode(sourceSubform.nodes.item(b).name).value.exData.loadXML(sourceSubform.nodes.item(b).value.exData.saveXML(),1,1);
   if (sourceSubform.nodes.item(b).className=="instanceManager" && targetSubform.resolveNode(sourceSubform.nodes.item(b).name)!=null)//check for matching subforms
    loadData(sourceSubform.nodes.item(b),targetSubform.resolveNode(sourceSubform.nodes.item(b).name));
Just make sure the source and target subform hierarchies are identifal, same name and all. It will recurse down the tree and transfer source fields (rich text and plain) to their sister targets.
Kyle

How to prevent multiple users from updating the same data in coherence

Hi,
I have a Java Web Application and for data cache am using coherence 3.5. The same data maybe shared by multiple users which maybe in hundreds. Now how do I prevent multiple users from updating the same data in coherence i.e. is there something in coherence that will only allow one user a time to update. If one user is in a process of updating a data in coherence and some other user also tries to update then the second user should get an error.
Thanks

I have a question on the same line. How can I restrict someone from updating a cache value when I a process is already working on it. I tried locking the cache key but it does not stop other process to update it , it only does not allow other process to get lock on it.

Can we with ligthroom have the sofware set up on multiples computer mac and mc and share the same dat base library?

can we with ligthroom have the sofware set up on multiples computer mac and mc and share the same dat base library?

No, a Lightroom catalog cannot be on a networked drive, and can only be accessed by a single user at a time.

Multiple reads of the same data from Multiprovider by Query (Bex)

Hello, guys!
We're having issue with performance of a query built on Multiprivider. During our investigation, we've found out that within one run of a Query, it several times refers to InfoProvider for the same data (see image attached).
Do you have ideas what can be a reason for multiply reads of the same data from Multipvovider?

Hello Nikita,
By "copy of a query" i meant something like this as shown below :
*Kindly click on the screenshot for a better view.
1) See the highlighted portions below in the screenshot . See Query 2 highlighted and name of the BEx query highlighted.
2) See the highlighted portions . See Query 3 highlighted and name of the BEx query highlighted.
As you can see from the above screenshots i have used the same BEx query 2 times by the name of Query 2 & Query 3 . Infact i have not attached the complete screenhsot . In that i have used it 6 times.
I have to analyze this a bit in detail but what i am guessing is that when this WEBi is called the single BEx is also called multiple times. And hence it hits the Info Provider multiple times resulting in a decreased performance.
But this does not mean that this is wrong approach. There are various areas where you can improve for example :
1) Either improve your BEx query if possible or use aggregates or something like that .
2) Use the Query stripping setting in WEBi so that unused dimensions and measures are not pulled resulting in an improved performance. It's switched on by default.
Thanks!!
Regards,
Ashutosh Singh

Sending the same data to multiple receivers.

Similar Messages

Maybe you are looking for