Sequence of processes in WM and putaway labels use

Hi all,
I am working on WM module.I wanted to know the exact sequqnce of the foll processes in a WM module.
GR
Inbound delivery
Transfer order creation
Putaway process
Also for the putaway process,why are the putaway labels printed???Are these labels physically applied on the materials which are put away in the storage areas during the putaway process??Pls clarify.

Searching on the forum & internet you can find lots of WM resources...
As for your question:
1) Best solution would be to ask the funcional consultant who is responsible for the system in which you are working on WM developments - this way you may get help more quickly...
2)
2a) First you should check to which plant/stoare location your WH is assigned:
SPRO > Enterprise Structure > Assignment > Logistics Execution > Assign warehouse number to plant/storage location (V_T320)
2b) First you should decide whether the WH is HUM managed or not
SPRO > Logistics - General > Handling Unit Management > Basics > Materials Management > Inventory Management > HU Requirement for Storage Locations and Default Values for Deliveries
Here you can see whether handling unit management is set for the plant/storage location combination (V_T001L_L-XHUPF).
2c)
2c1) IF no HUM requirement is set for the plant/storage location combination, the sequence is:
1) Inbound delivery 2) Putaway (TO creation) 3) GR
2c2) IF HUM requirement is set, you have to check how GR/putaway sequence is defined:
SPRO > Logistics - General > Handling Unit Management > Basics > Delivery > Define Sequence of Transfer Order - Goods Receipt (V_TVLR-XWBTA)
IF the mentioned field is set, the sequence:
1) Inbound delivery 2) GR 3) Putaway (TO creation)
IF not then:
1) Inbound delivery 2) Putaway (TO creation) 3) GR
http://help.sap.com/printdocu/core/print46c/en/data/pdf/LEWE/LEWE.pdf
Edited by: Csaba Szommer on Jan 10, 2011 3:21 PM

Similar Messages

Using macbook pro, how do I create and print labels

how do I create and print labels using macbook pro

Do you mean address labels ? Please check out this link
http://smallbusiness.chron.com/can-print-address-labels-macbook-pro-58714.html
http://support.apple.com/kb/ht3952

Just installed latest Itunes, and system now grinds to a halt, caused by apsdaemon.exe and apple mobile using 99% processing. Have stopped these processes, but each time I start Itunes I have to do it all over again, any help would be appreciated

Having just installed the latest iTunes update, I find my system grinds to a complete standstill. I've checked and found two apple processes, apsdaemon.exe and applemobiledeviceservice.exe use 90% plus of my processor, so have stopped these. However, each time I start iTunes the same situation occurs. Is there anyway I can remove these exes from my system or is apple aware of this stupid update and what are they doing about it. Any guidance would be very much appreciated

What version of itunes were you using before you updates?
Have you checked other related post?
iTtune will require applemobiledeviceservices.exe and others to run. What you are experencing is usually caused by a conflict with other software on you system. Everybodys system is set up differently, so there is not a "one fix all". Most commonly associated with Firefox addons, video accelerator software, podcasts on the backup, anivirus software, parential control software, take you pick!
I found my fix here.
https://support.apple.com/kb/TS4123

Basic process flow for WM and putaway process

Hi all,
Can someone explain me the basic process flow in decentralised WM system???
Also what do the foll terms mean in aWM process:
1.Putaway process
2.Putaway label
3.Selling Unit label
4.MIC #

In decentralized Warehouse, normally Inventory is managed in in a seprate application. SAP System will coordinate with it through IDOCS. For example, Sales Order and Outbound Delivery created in SAP Systems. Delivery is communicated to Decentralized Warehouse using an IDOC. Then Picking happend in the external system.
1.Putaway process: The process of placing the stocks in the appropriate Bins in a Warehouse. It starts after GR is done for a Inbound Order
2.Putaway label: Its a label that will beprinted with some basic information like destination bins
3.Selling Unit label: Again label
4.MIC # : Management of Internal Controls

Printing a putaway label at the time of Goods Receipt

When the Goods Receipt(GR) is done for the stock in interim receiving area (Storage Type 902) then the put-away labels are printed from Transfer Order for GR.
Users will take the labels and move the materials from staging area to destination bins according to information printed on the label. There should be feature to re-print the labels (from spool standard SAP function) as and when needed.
Currently at the IDC location, the following process is utilized; The WMS system produces a putaway label at the time of Goods Receipt. The label print screen in WMS asks for the load ID of the received load and the operator selects label type l and the barcode printer it should print at. The label is automatically printed and sent to a pre-assigned printer. The label is then used to identify the location which the material is to be relocated to from the receiving area, either a picking bin location, or a surplus bin location for storage and replenishment purposes. The label has Job Type, Receipt Date, Quantity, Material Number & Description, Operator I.D., Number of pallets/boxes, Unit of Issue, Serial Number, Destination bin and Load I.D.
can any one guide me on this!! ASAP

do you mean when a GR is printed, it shud automatically print the label as opposed to the manual process now?
In that case you may have to find a user exit that is triggerred upn saving the GR and call ur label program from there.

Often, Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted.

Hello,
Often, the Firefox app will close, but the underlying Windows process will not and cannot be stopped via Task Manager. When this happens, Firefox can no longer be used...the system must be rebooted. This happens especially when many apps are running but even though there are plenty of memory resources available.
I have tried to find if something is using Firefox in the background, but have no way to know what that would be.
Their are no apparent viruses detected.
Firefox is version v5.0 and occurred in earlier release.
System is Windows 7 (64bit).

well, it's not the same hardware and it's a bit different.
I managed to pass that stage somehow but I still have a problem
I don't use the built-in creator tool that comes with Spyrus as it doesn't know how to append a pre-staged media that was created by SCCM that should apply the Windows file system to a second partition and the WinPE to the first partition.
I managed to do everything. my only problem is that the WTGCreator that comes with SCCM 2012 R2 creates the 350MB partition with FAT32 file system.
when I boot from the device I get the WinPE, I can choose a task sequence and then it fails when trying to apply the wim file. the error tells me that the 350MB partition is FAT32 which is not supported (even though it chooses the second partition, which
is all the rest of the disk space)
what I did was adding another task that converts the 32 Fat partition to an NTFS partition and then the process continues and finishes successfully! but that's a workaround.
I'm trying to make this process as smooth as possible without having additional steps
Tamir Levy

Automatic creation of Transfer order for Picking and putaway

Hello All .
I would appreciate if someone can explain the process of configuring Automatic creation of Transfer order for Picking ( outbound delivery)and putaway( inbound delivery) .
thanks
Rahul

Hi
To have transfer orders created automatically in the background, you must first set the indicator Automatic transfer order creation for each respective movement type in the Customizing application for Warehouse Management under the path <b>Activities - Transfers - Define Movement Types</b>. The system automatically copies this indicator into the header item of the source document.
For more information on how to set up automatic transfer order creation for transfer requirements and posting change notices, refer to the IMG for Warehouse Management under the path <b>Activities - Transfers- Set up Autom</b>. TO Creation for TR/Posting Change Notices.
You can find more details on this link
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Thanks & Regards
Kishore

Access sequence for Partner determination -Sales and Interaction Center CRM

Dear experts,
We use som transaction types both in our sales (t/c crmd_order) and in Interaction center (t/c CIC0).
We though want the partner determination to act differently when creating this transaction in sales compared
to when creating it in the interaction center. For example in the sales process we want the contact persons to be searched from the relationsship of the sold-to party but in customer service we do not want an automatic determination.
There are some BADIs available that can be used in the access sequences as a source but can they be used to
switch off some automatic determination when creating the transaction in t/c CIC0 whereas the automatic determination should work when creating the transaction in the sales process ie. t/c crmd_order?
Looking forward to have any input on this, thanks!
best regards,
Christina

Hi,
What we did is to remove the automatic determination on the transaction type that is used both in the sales process and Interaction center/customer service. The partner in question is only determined from the previous document in case you
create a follow-up document.
rgds,
Christina

Need different processes for Update and Delete buttons

I'm using a customized version of the Issue Tracker sample application. I've added a table called project_person(project_id,person_id) so that a project can have multiple people assigned to it and so that one person can have multiple projects. I have a form report that lists all of the projects with an edit link which opens one project. On the individual project page, there are page items for each of the columns in the project table and a item for the person assigned to the project--this item is pulled from the separate project_person table. I have two buttons--Delete and Apply Changes. If you click on Apply Changes, the project table should be updated and then the project_person table if the assignment was changed. If you click on Delete, it should delete the project_person record first and then delete the project record. I created a new conditional pl/sql process that updated two tables if 'Apply Changes' button is cliicked. I then created a separate conditional process when the Delete button is clicked. This conditional process checks to see if a record in the project_person table exists, and if so, delete the record. Then delete the project record.
The update process works fine. The delete process reloads the list of projects with a success message at the top without actually doing a delete and I have no idea why. Does anyone have any suggestions?
I am not using the automatic row processing, but should I? Or is it ok to have the two separate conditions for the two different buttons?

Hello again Miah,
Check the "Sequence Number" for your processes. Typically, APEX will increment by 10, each time you create a Page Process as I recall. You can set this to be any number you want; even if you duplicate the sequence number (ie: you can have multiple Sequence 10 processes).
Make sure that your Delete process is firing properly and walk through the logic in the source code to be sure that any "IF" or "WHERE" logic is satisfied. For example:
Begin
delete from emp_table
where 1=2;
End;If this was your page process code - you would receive a SUCCESS message because the PL/SQL code executed successfully, even though nothing will be deleted since 1 will NEVER equal 2.
So, check Delete Source carefully.
{size:14}{color:green}Can you post the code from your delete page process here?{color}{size}
Good luck,
Don.
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :)
Edited by: dfcii© on Oct 27, 2009 10:55 AM

Sequence of process types in process chains

Hi all,
Can any one help me in listing down the sequence of process types we must have when we are using process chains. Like If I am loading data from R/3 to ODS and to cube then what all things should be included (creating indexex, deleting indexes..)and most importantly what sequence they should be in. ?
Also what are the types you need to include in master data load process chain, where does the change run fit in the process chain.?
Thanks alot in advance,

Hi KM,
The steps would be as follows:
1. Start Process
2. Load any master data - attributes.
3. Change run .
4. Text load.
5. Load the ODS.
6. Activation of ODS data.
7. Delete indexes of Cube.
8. Further processingof ODS data to Cube.
9. Create indexes.
10. Refresh Statistics.
The delete index can be after the "further processing step" also.
Bye
Dinesh

Please tell me the step by step process of backup and full restore

Dear all,
we are using ecc5 and windows and oracle 9i I am going to apply support package .Please tell me the step by step process of backup and full restore . I am using DB13 for backup. Please suggest.
Regards,
Shiva

Hi,
Login as <SID>adm user & run the following command
brrestore -b <backup logfilelogfile> -m full
this command restore the backup.
you can find backup logfile in /oracle/<SID>/sapbackup/.ant or .aft .
For backup using brtools follow the following procedure:-
Run Brtools Than you get the following option
1 = Database backup
2 - Archivelog backup
3 - Database copy
4 - Non-database backup
5 - Verification of database backup
6 - Verification of archivelog backup
7 + Additional functions
8 - Reset input values
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR662I Enter your choice:
1
BR280I Time stamp 2008-04-04 18.41.57
BR663I Your choice: '1'
BR280I Time stamp 2008-04-04 18.41.57
BR657I Input menu 15 - please check/enter input values
BRBACKUP main options for backup and database copy
1 - BRBACKUP profile (profile) ....... [initPRD.sap]
2 - Backup device type (device) ...... [tape]
3 ~ Tape volumes for backup (volume) . []
4 # BACKINT/Mount profile (parfile) .. []
5 - Database user/password (user) .... [system/*******]
6 - Backup type (type) ............... [online]
7 - Back up disk backup (backup) ..... [no]
8 # Delete disk backup (delete) ...... [no]
9 ~ Files for backup (mode) .......... [all]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR662I Enter your choice:
3
BR280I Time stamp 2008-04-04 18.42.25
BR663I Your choice: '3'
BR280I Time stamp 2008-04-04 18.42.25
BR681I Enter string value for "volume" (scratch|<tape_vol>|<tape_vol
PRDB04
BR280I Time stamp 2008-04-04 18.43.06
BR683I New value for "volume": 'PRDB04'
BR280I Time stamp 2008-04-04 18.43.06
BR657I Input menu 15 - please check/enter input values
BRBACKUP main options for backup and database copy
1 - BRBACKUP profile (profile) ....... [initPRD.sap]
2 - Backup device type (device) ...... [tape]
3 ~ Tape volumes for backup (volume) . [PRDB04]
4 # BACKINT/Mount profile (parfile) .. []
5 - Database user/password (user) .... [system/*******]
6 - Backup type (type) ............... [online]
7 - Back up disk backup (backup) ..... [no]
8 # Delete disk backup (delete) ...... [no]
9 ~ Files for backup (mode) .......... [all]
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR662I Enter your choice:
c
BR280I Time stamp 2008-04-04 18.43.46
BR663I Your choice: 'c'
BR259I Program execution will be continued...
BR280I Time stamp 2008-04-04 18.43.46
BR657I Input menu 16 - please check/enter input values
Additional BRBACKUP options for backup and database copy
1 - Confirmation mode (confirm) ....... [yes]
2 - Query mode (query) ................ [no]
3 - Compression mode (compress) ....... [hardware]
4 - Verification mode (verify) ........ [no]
5 - Fill-up previous backups (fillup) . [no]
6 - Parallel execution (execute) ...... [0]
7 - Additional output (output) ........ [no]
8 - Message language (language) ....... [E]
9 - BRBACKUP command line (command) ... [-p initPRD.sap -d tape -v
Standard keys: c - cont, b - back, s - stop, r - refr, h - help
BR662I Enter your choice:
c
BR280I Time stamp 2008-04-04 18.44.29
BR663I Your choice: 'c'
BR259I Program execution will be continued...
BR291I BRBACKUP will be started with options '-p initPRD.sap -d tape
E'
BR280I Time stamp 2008-04-04 18.44.29
BR670I Enter 'c[ont]' to continue, 'b[ack]' to go back, 's[top]' to
c
BR280I Time stamp 2008-04-04 18.45.13
BR257I Your reply: 'c'
BR259I Program execution will be continued...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
BR051I BRBACKUP 6.20 (113)
BR189W Expiration period equal 0 - backup volumes could be immediate
BR055I Start of database backup: bdxpzadt.ant 2008-04-04 18.45.13
BR319I Control file copy was created: /oracle/PRD/sapbackup/cntrlPRD
BR280I Time stamp 2008-04-04 18.45.13
BR057I Backup of database: PRD
BR058I BRBACKUP action ID: bdxpzadt
BR059I BRBACKUP function ID: ant
BR110I Backup mode: ALL
BR077I Database file for backup: /oracle/PRD/sapbackup/cntrlPRD.dbf
BR061I 25 files found for backup, total size 45884.883 MB
BR143I Backup type: online
BR113I Files will be compressed by hardware
BR130I Backup device type: tape
BR102I Following backup device will be used: /dev/rmt0.1
BR103I Following backup volume will be used: PRDB04
BR280I Time stamp 2008-04-04 18.45.13
BR256I Enter 'c[ont]' to continue, 's[top]' to cancel the program:
c
BR280I Time stamp 2008-04-04 18.45.50
BR257I Your reply: 'c'
BR259I Program execution will be continued...
BR208I Volume with name PRDB04 required in device /dev/rmt0.1
BR210I Please mount BRBACKUP volume, if you have not already done so
BR280I Time stamp 2008-04-04 18.45.50
BR256I Enter 'c[ont]' to continue, 's[top]' to cancel the program:
c
BR280I Time stamp 2008-04-04 18.46.26
BR257I Your reply: 'c'
BR259I Program execution will be continued...
BR280I Time stamp 2008-04-04 18.46.26
BR226I Rewinding tape volume in device /dev/rmt0 ...
BR351I Restoring /oracle/PRD/sapbackup/.tape.hdr0
BR355I from /dev/rmt0.1 ...
BR241I Checking label on volume in device /dev/rmt0.1
BR280I Time stamp 2008-04-04 18.46.26
BR226I Rewinding tape volume in device /dev/rmt0 ...
BR202I Saving /oracle/PRD/sapbackup/.tape.hdr0
BR203I to /dev/rmt0.1 ...
BR209I Volume in device /dev/rmt0.1 has name PRDB04
BR202I Saving init_ora
BR203I to /dev/rmt0.1 ...
BR202I Saving /oracle/PRD/920_64/dbs/initPRD.sap
BR203I to /dev/rmt0.1 ...
Let me know If you have any problem regarding backup & restore
karan

What is the RF transaction LMXX to print out a label and rational of using label

Hi,
I search through the web and to my vail and no answer to be found.
Question 1 -
I would like to know what is the standard SAP mobile RF transaction code (i.e. LMXX) to print a label (i.e. something like LT31 to print a label), do you know?
Question 2 -
I am a bit confused here with regard to the business rational about the use of label.
For example, when a freight forward truck send us our goods stuck with pallet and parcel, the trucker pass us a document which consists of the PO and Inbound delivery number on the paper. I understand at this stage we can use RF to scan inbound delivery to create TO putaway.
However, my question is do we need to generate a putaway label to attach to all the parcel (pallets of the goods)? What is the business rational and benefit of printing a putaway label?
In between, there is no Storage Unit (SU) nor HUM used in this little subsidiary of our company.
Please enlighten me,
regards,
Tuff

Hi,
You can print the SU labels automatically when you do a TO confirmation from RF based on the settings or you can manually do a SU label Print using LT32.
Normally we use SU labels to uniquely identify each pallet with a unique id no, also you can incorporate all the info such as material, batch, quntity, TO no etc. in the SU label which be used for scanning for putaway.
If you don't use SU management, then you can just go for TO label print.
Normally, business also use Shipping labels while packing the materials in the warehouse which we will used by the container (especially outside the plants to identifiy the destination of the material)
Thanks,
Ram

Printing of GR/GI Slips and Batch Labels

Hello All,
Currently, at my client's place system is configured such a way that after completing the MIGO process, it prints 2 copies of the GR/GI slips whenever the goods movement takes place. Now along with the GR/GI slips they want to have the system prints the Batch labels for the quantities of units received.
They want to print the batch labels by using the MARA-WESCH field on the Plant Data/Storage view of the material master. But after checking that field I found nothing (not a single value) in it. But still the system prints 2 GR/GI slips after doing MIGO.
I am not able to figure out how to configure the system so that it should print number of Batch Labels by using the value in this field without affecting the current flow of GR/GI Slips. If anyone know about this then please respond.
Thanks.

Hi
We set up a separate condition record (Z001) which prints labels in addition to out 2 GR slips
We purchased some software from Zebra (who supplied our label printers) that is specific to SAP. We created the labels using the Zebra software and then imported the layout.
Therefore with a separate condition we could maintain separate parameters for the number required to be printed.
DArren

Packing slip and address label for delivery

Hello all,
I have a business requirement where i want the delivery to generate packing slip and address label for delivery, once the TO picking is complete and updated in the delivery.
My first question - I would like to the configuration steps involved in making the delivery to print the required output types automatically .
and my second question is how the SAP system can be configured to make the delivery print the packing slip and address label for delivery automatically once the Picking status is updated in the delivery.
Thanks,
Maxx

Hi Max,
You have to carry out your settings in:
SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries
1) Maintain Access Sequence
- you should have a valid access sequence with proper the condition tables
2) Maintain Outout Types
- you should have an output type with proper settings: print progrm, samrtform (or spascript, etc), etc
- you output should be assigned to the proper access sequence
3) Maintain Output Determination Procedure
- you should have a valid procedure --> you have to assign your output type to the procedure
- in field V_T683S_XX-KOBED you have to define a requirement type for your output type (that contains an ABAP code). This ensures that the output type will be generated only if the conditions defined in the ABAP code are met.
4) Assign Ouput Determination Procedure
- You have to assign the procedure to the delivery type you use
Master Data
If your configuration is OK, you can create the output determination condition record in VV21:
- you have to choose the proper key table
- you have to define the proper conditions
- you have to define the printer
- you have to define number of outputs
- etc
SPRO > LE > Shipping > Basic Shipping Functions > Output Control > Output Determination > Define Requirements
- Here the programmer can define the Requirement Type that can be assigned to the output type in the procedure.
- You can use e.g. VBUK-PKSTK to check the packing status (VBUK-VBELN=LIKP-VBELN)
All the mentioned settings (config, master data) can be done in transacton NACE also (except writing the ABAP code).
Regards,
Csaba

I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE. Having trie

I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE. Having tried this, I was met with a recorded message, in Arabic, and no options to speak to anyone. I have found this process extremely frustrating and poor on your behalf. Not providing any options to speak to an Adobe representative is equally annoying. Please get back to me ASAP, as I need to use the product immediately.

CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O.

Sequence of processes in WM and putaway labels use

Similar Messages

Maybe you are looking for