Serial Number Prob after upgrading Dreamweaver 8.0 to Studio 8

I've just upgraded my Dreamweaver 8.0 to Studio 8.0 to get
full versions of Flash and Fireworks. When I try and activate my
Flash (or Fireworks) it asks for an Upgrade serial number after I
put in the new serial number supplied for all the Studio 8
products. The only serial number I have is the Dreamweaver 8.0 one
which is what I upgraded from and putting this in doesnt help.
Where am I going wrong?

I've reported it to Customer Support but because of the
Easter holiday I doubt I'll get a reply for a few days. I really
need access to Flash now and would appreciate any advice anyone
has.

Similar Messages

Serial number problem after upgrade to Mavericks

My old CS5 Photoshop v. 12.0.4 works fine in an old Mac computer with OSX Snow Leopard, but after transfer to a new Mac with OSX Mavericks whenever I try to open Photoshop it asks for a serial number I no longer have. Bought Photoshop years ago, never registered it because I only had dialup internet in those days (and my rural DSL line still crawls at 1.5 speed), install discs and box are nowhere to be found and I don't want to upgrade to a newer version. Just want to use my old Photoshop like I did before, without Cloud or any other nonsense. Can I I get a new serial number or how do I activate it?

If you lost your serial number, your proof of purchase and also failed to register your product, there's not a lot we can do for you. Sorry.
If, however, you lost your serial # but have the product installed and activated using a genuine serial # you can launch Photoshop and select Help>Product Registration... to register the serial # with your Adobe ID. You can then log into your Adobe account on Adobe.com to retrieve your serial #. (Note: It takes about 5-10 minutes for the serial to show up in your My Products of your Adobe account when you register this way)
http://www.adobe.com/support/registration.html
Other purchased products: From within your product, choose Help > Product Registration. (You don’t need to have your serial number when you use this option.)

I have CS2 with the discs and serial number. After needing to have my computer wiped, reloading the discs, and imputing the serial number, neither phone activation or on-line activation works. What do I do? Lanny

I have CS2 with the discs and serial number. After needing to have my computer wiped, reloading the discs, and imputing the serial number, neither phone activation or on-line activation works. What do I do? Lanny

Adobe took down the CS and CS2 activation servers, but they put up a version of CS2 for those who previously had a license to it.
You will need to download the software from here, and use the serial number given on these pages. Follow the directions on this link, and you will soon be up and running again.
Error: "Activation Server Unavailable" | CS2, Acrobat 7, Audition 3

After my macbook was serviced, when I tried to open CS6, it prompted me to key in the serial number. After keying in, I got error message saying the serial number is invalid. However I have checked that it is correct.

After my macbook was serviced, when I tried to open CS6, it prompted me to key in the serial number. After keying in, I got error message saying the serial number is invalid. However I have checked that it is correct.

First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

I have a case number but have not received my serial number yet after 4 days. Please help.

I have a case number but have not received my serial number yet after 4 days. Please help.

Do you know where I go to do contact Adobe directly, please?
On Tue, May 5, 2015 at 11:06 AM, Barbara B. <[email protected]>

Serial number rejected after trial use of lightroom

I trialed lightroom and liked it very much. I purchased the product from another on line store and now can not register it. The solution which stated to download the an english international file is not avalible as it does not give me this option!!! It states my serial number is an upgraded one and I need the pervice serial number which I dont have due to the fact that it was a trial verson. please help! Sheri

thank you!!!

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do?

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do? Can I find the original serial number in my old Imac?

You'll have to contact Apple. See Pro Application Replacement Serial Numbers

Serial number request after transfer

Following many reinstallations when transfering my complete catalog of PE 8, I now receive this message when switching fron Organizer to Editor:
- I have deactivate this serial number on one of my PC and I can ask Adobe now to validate this number;
- I have a new serial number...;
- I want to solve this problem later (5 days remaining).
What should I do since I do not want to to deactivate now on my old PC before I am completely sure of the transfer. So I must continue workig for now.
Beside my intention woul be to up grade to PE 10 some day, Should I do it now in order to solve everyting? In that case what w will happen with the old catalog? Must I keep version 8 on the PC?
Help please

It does’nt seem to cover PE 8 so it does not solve my problem.
Help!
De : Preran [email protected]
Envoyé : 1 décembre 2011 11:02
À : Jean- Pierre Lemonde
Objet : serial number request after transfer
Re: serial number request after transfer
created by Preran <http://forums.adobe.com/people/Preran> in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/4057212#4057212

Dreamweaver CS4 serial number invalidated after 8 months of use

In January 2nd 2014, I purchased an OEM version of Dreamweaver CS4 for Windows from a reseller called "Smart Shop" which looked like a serious outfit [emails from Jet Support were received with a link to "Access your order and customer support http://appscustomerscare.com"]. A serial number was obtained. I downloaded the program from their site and installed it without any problem: When I launched the application, the serial number was inserted and the Adobe server validated it: the application worked seamlessly for more than 8 months.
Yesterday, when I launched Dreamweaver CS4, a dialog box showed up stating the the serial number used was invalid! I used the serial number that I had been given to activate Dreamweaver but the form showed a red X at the end of the serial number meaning the the serial number was invalid.
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
Now, I'm back to the trial version (available for 29 more days)!
Is there a licensing problem link with buying an OEM version of Dreamweaver from resellers?
Why was the serial number considered valid on first run and all successive runs and then invalidated after 8 months?
How can I be sure that my next "bona fide" purchase of Dreamweaver won't run into the same problem?
Is there a way to recognize good from bad resellers?

Sorry you got nailed - Next time try this
http://www.adobe.com/cfusion/partnerportal/index.cfm
Some info about appscustomerscare
http://www.scamadviser.com/check-website/appscustomerscare.com

"Invalid Serial Number" - Photoshop CS2 (Upgrade)

Hello, I got the Photoshop CS2 Upgrade some years back and it has always worked fine. Whenever I needed to reinstall my operating system, it was a simple matter of deactivating the software and then activating it after reinstalling Windows.
However ths week, after reinstalling my Windows 7, I was informed that the Adobe CS2 activation server is no longer available, so I couldn't activate my CS2 that was installed from my CD. I read all about it on this website, and followed the instructions to download Photoshop CS2 directly from the website.
Now that I am installing the CS2 that I downloaded from here, I am being told that my serial number is "invalid". I have entered it correctly. It is very frustrating, the software on my CD has never given any problems in upgrading my Photoshop CS to CS2, but the one I downloaded is a pain. I would appreciate it if someone could help me resolve this problem.

Are you trying to install the one in the following link that doesn’t need activation if you use the serial number also supplied at the link, below, or some other one? “Downloaded from the website” and “downloaded from here” aren’t very precise:
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

Help - Photoshop serial number problems after Premiere demo- AIR ??

Hi- Ive been a licensed owner of Photoshop since 1997. In 2003, because I was a teacher on the east coast for an accredited school on the west coast that had students in my area, I bought CS1 for my (2) new identical XP computers. In 2007, I bought (2) new indentical Windows Vista computers and installed CS1 on one of them and used it until the C drive (Seagate series 7200.1) crashed in May of 2010. I then re-installed CS1 onto that Vista machine and used it with no problems until January of 2011 when I installed a demo of Adobe Premiere video editing software. Shortly after installing the Premiere demo software, I got a pop up that said to "Re-activate Photoshop".
To this day, I have not been able to use Photoshop. The install and activation went as expected, GoLive works fine, but whenever I try to start Photoshop, I get a popup error that says "Could not complete your request because of missing or invalid personalization information." I tried uninstall-reinstall but Photoshop wont open and I still get that error. I also noticed that the serial number area of the Photoshop splashscreen is scrambled, meaning instead of having the serial number and the name of my computer that is suppose to be there, it has a sting of strange characters like this: Home.>:::Computer"""@%#>]
I tried numerous call to Adobe, they said try this and that, I did all those things and yet my Photoshop still does not work and the serial number is scrambled. The Adobe support people also tell me "CS1 is not approved for Vista so we don't support install problems". CS1 installs fine- always has, but now there's something wrong with my serial number-to which they basically replied: Upgrade to CS5, OR post on the forum. I don't want CS5, I just want my Photoshop software back according to the license agreement. So I am here asking if anyone has any suggestions or insights.
One thing I noticed during one of the re-insatll attempts is that even though I unisntalled the Premier demo, there was something left behind in my Vista programs list. It is called "AIR". I have tried to uninsatll it numerous times, but it wont uninstall.
Any suggestions or insights?
Thank you,
Steve

Mmh, sounds like Adobe AIR has meddled with your local port/ socket configuration. That would also explain the jibberish in your serial input field - it cannot properly connect to the activation service and only spits out the URI path. Have you tried booting in safe mode sans network support? This may allow to get rid of Adobe AIR... Otehr than that the opposite may work - download the manual AIR installer, run it, let AIR run it's update and then try to uninstall it from there.
Mylenium

Serial number issue after Mountain Lion clear install.

Hello.
I have a problem with Aperture 3 (v.3.4), evry time I'm rebooting OSX (Moutain Lion) Aperture is asking again for serial no.
I have Aperture 2 + Aperture 3 upgrade serials no.
After puting them, Aperture is working fine until next restart of OSX.
Already fixed database and removed aplication settings and still the same issue.
Please advise.

You may have a corrupted "ProAppSystemID" file.
To stop Aperture asking for the serial number, check, if you still have an old file "ProAppSystemID" in your System Library.
Quit Aperture.
Go to your MacintoshHD and open the folder "Library", then "Application Support", then "ProApps".
Remove the File "ProAppsSystemID" to the Desktop, if it exist and restart Aperture.
Reenter your serial number, hopefully for the last time.
Sometimes Aperture writes this file to a temporary directory, when it cannot write to the Library. If the above does not work, look at the temporary directory /tmp
Use the Finder's "Go" menu
Go > Got to folder and enter /tmp into the textfield. If you see the file there, move it to its proper location.
Regards
Léonie

How to delete the "S" in the scanned Serial Number Barcodes after it has been received?

I scanned Serial Numbers but after receiving them I noticed it contained the "S" (serial) in the serial number which isn't part of the serial number.. How can I go back in and edit the serial numbers to remove the "S"?

Hi Dave,
My first advice would be to record the S in the serial number.
But if you can't, one way to solve it would be to ask an ABAPer to implement an enhancement in function CONVERSION_EXIT_GERNR_INPUT to remove first character of serial number if it's an "S".
This is not a complete solution because you might have another serial number with a legit "S" as first character, so the programmer should limit this change as much as possible to your business case.
regards,
Edgar

Serial number error while upgrading to Photoshop CS6

I just bought from Adobe an upgrade from PS CS3 Extended to PS CS6 Extended, which was indicated as a valid upgrade. Unfortunately, when I enter my 24 digit serial number, get a message saying I have an invalid product for upgrade. I'd like to resolve this by either a method to successfully install and activate CS6, or I'd like a refund. Is there a specific second or third tier Customer Service number I can reach someone to help me resolve this?
Has anyone else had this problem. I've seen issues when people are missing their "last 4" digits of a serial number, but in this case I have all 24 digits.
Adobe is telling me the full version of CS3 serial number is not in their database, so it was a pirated version, which I can assure you is false.
I have the full box, with all the Adobe stickers, marketing crap, and everything. I've been on chat with Adobe for the past hour trying to persuade them that their system must be screwed up, but all I get is "sorry, we can't help you."
anyone out there that can help me before I write Adobe off forever???

I guess what bothers me the most is that Adobe led me to believe, for about 5 years, that my copy of CS3 Extended was valid, when it turns out (so they say) that it is not.
I've installed it a few times since it came out in 2007 (machines come and go), and every time it registered successfully. If it's not legitimate, why keep telling me it is by way of a successful registration message?
That's what really ticks me off about all this.

Serial number entry after posting delivery doc......

hi experts....
we have a requirement in which in the standard sales cycle of Sales order->delivery document posting ( PGI)-> invoice billing the client wants that serial number entry (which is done at the time of PGI) should be done after invoicing(at the end of the day) because as per the business practice of the client, its not practically feasible for the client to enter serial numbers at the time of selling the finished material. The client manually records the serial numbers on the invoice copy and enters the serial numbers for the respective invoices at the end of the day.
Now while testing the client scenario we found that once PGI & invoicing has been done without entering the serial number for the material, the system does not accept any serial number assignment for that material after the completion of sales cycle.
So is there any solution in which serial number can be entered for a material whose PGI and invoicing has been completed?
Thanks & Regards
Vikas Hali

Hello,
As you know the system may not allow to enter the serial number details in the delivery --> Extras --> Serial numbers field, once the delivery is completely PGI'ed and invoiced.
But you may change the same in the table by debug mode. You need to update serial number in the material document in the table level also. Contact your ABAP expert, he may be able to guide you properly.
Prase

Serial Number Prob after upgrading Dreamweaver 8.0 to Studio 8

Similar Messages

Maybe you are looking for