Serial number skips in RG23C part2

Dear Experts,
we have problem in Serial numbers in RG23 C part II statement, some serial numbers are missing in the statement, and we could not trace whether it was generated or not!
there are nearly 15(Continuous) numbers are missing in the statement
usually if there was problem in rounding of excise duty there will be chance to skip 1 serial number, but in our case 15 serial numbers were missing in the statement, we have checked in table "J_1IPART2" but we haven't found details for skipped serial numbers.
Please guide me where i can check, and what could be the other reason to skip number by system.
Regards
babu

Dear Experts,
We have applied OSS note 1019973 in order to avoid skip of serial numbers,
Regards
babu

Similar Messages

Serial no is skipped in RG23C register

Hi All,
In RG23C register, the serial number is skipped in between entries. how to overcome this problem.
Regards
sankar

Hi,
Apply proper Snote.This is system bug.
regards

I did not keep the email with my registration for the free trial so I do not have a serial number as I have no products due to the fact that my trial has expired but I would now like to purchase a product and I cannot skip the serial number request.

I did not keep the email with my registration for the free trial so I do not have a serial number as I have no products due to the fact that my trial has expired but I would now like to purchase a product and I cannot skip the serial number request in order to buy the product it's so irritating I'm about to just do a different product altogether... anyone know how to get or bypass the serial number request?

You must first make the purchase, then you will receive the serial number you are asking about. YOu do not acquire the serial number thru the software. You acquire it thru the purchase, possibly via a follow-up confirmation email.

RG23C-Part -I Serial Number Updation-Issue

Hi CIN Gurus,
        I am facing a problem in excise sap 4.7 version, wherein if I do the capital goods receipt via MIGO and also capturing excise invoice or creating only part-I entry along with it , the system is giving me 2 serial numbers with receipt and issue indicator for the MIGO Material document number in Table J_1IPART1.
       My client is not agreeing with the concept of two serial numbers for the same transaction and also in the PART-I register system is giving the serial number with receipt indicator. The client is reluctant to accept because there will be a gap in the excise serial number Part-I which is not acceptabe for excise authorities.
        Is there any remedy for making it to 1 serial number.
Thanks in advance and points will be suitably rewarded.
Regards
Gopal

Hi Gurus,
Any updation or some reply on this thread.
Please share your thoughts .
rgds
Swamy

Can I use the same serial number for master suite when reinstalling after clean install of windows 8

I am reinstalling windows because windows got corupted. I can not access my computer to deactivate the software. Do I need to be worried about not having deactivated it? I will be reinstalling mastersuite 6 after I get windows 8.1 clean installed on the same computer. I just want to make sure I will not have any problems reinstalling and setting up the adobe mastersuite after I have installed windows 8.1. I don't want to have a problem with the serial number still being registered to my old installation of windows that will have been on the same pc.
Thanks for your help!

Your previous activation will still be in the loop, so you should contact Adobe support and ask them to reset your activations. That way you can be sure you have the two your license allows for. You can always skip this if you only activated once before but it will leave you with no extra activation should you find a use for a second installation.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Serial Number History

Hi,
I need to get the serial number history for a material / serial number, I have found function module SERIAL_HISTORY which is exactly what I am looking for, but the function module doesnt have any exporting parameters or tables, and instead calls report RISERNR1. Is there any similar function module that I can use to return this data?
Thanks,
Sam

Hi Carlos,
Thanks, the problem is that SERIAL_HISTORY calls RISERNR1 directly which is displaying the history within in the GUI. I want to call this function module from another function module which will be called via RFC from CRM, so I need it to skip the following code.
SUBMIT RISERNR1 AND RETURN
WITH MATNR = MATERIAL
WITH SERNR = SERIAL.
I have got it working by copying the function to my own ZSERIAL_HISTORY, but I wanted to know if there was a more standard way to achieve this.
Thanks,
Sam

Serial number alternatively getting picked in incoming excise invoice-J1IEX

Hi All,
Serial number alternatively getting picked in incoming excise invoice-J1IEX part2 posting.
This problem we are facing only from today.
Can there be any problem in programme?
Pls suggest.
Regards,
Pavan

hi
check is there any user exit is activated

Automatically update PLA Serial Number

Hi CIN Gurus,
When we create J1IIN-Excise Invoice, the RG23A Serial numbers getting updated.
But how to get PLA Serial Number automatically updated in the database table. (J_1IPART2).
Because the client requirement is When the Invoice is printed, in that it should also list the RG23A/C or both Serial numbers updated and also the PLA Serial number(CESS or some times other excise duties).
And also to print the PLA Ledger which shows all the entries i.e RG23A/RG23C/PLA register.
Thanks in Advance. (Expecting to Go-live in next week.)
BEST REGARDS
SRI
Edited by: Sri on Sep 27, 2008 4:44 PM

Dear MBS,
Then each and every invoice before printing and send it with the lorry we need to do the utilisation. Is it what required ?
In real time, before printing the billing document, do we need to all that ?
Is it mandatory to print the RG23A serial number and PLA Serial number in the Invoice ?
With out printing them , just mentioning the duties and reference excise invoice number , will be accepted by Excise Department ?
Thanks in Advance.
Best Regards
SRI

CS6 Serial Number not valid on any Computer

Hey there! :-)
I hope that somebody here can help me with a little problem concerning the key of my CS6 Extended. Recently, I got a new PC, so I deinstalled cs6 on my old one (the version I have is only for 1 PC). I tried to install it on the new PC then. Unfortunately, the key was invalid. Afterwards I searched a solution for the problem. The Support site told me to reinstall cs6 on the old pc and deactivate it manually via the application itself (Help > Deactivate > Deactivate Serial Number on this Computer). I wanted to do this, but then the key was also invalid on the old computer. That means I'm not able to deactivate any Key.
So finally: The Serial Number I've got is invalid on both Computers! Now I can't use Ps Cs6 anymore. If some of you already know this problem, please let me know what I can do.
Bastian

only an adobe employe can help you with a serial number problem. i can tell you that almost everyone that has a serial number problem reads the explanation in that message 1 link and just skips right past the answer to their problem.
for example, your serial may be correct but unless you're using cds to install and you only own one adobe product, you're probably using the wrong installation file(s). of course i don't know that's true and that's why you need to contact adobe.
contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

RohoHelp 7 - Won't accept Serial Number

HI,
I've installed the trail version of RoboHelp 7.Our company
has now bought licenses for RoboHelp 7. When I enter the proper
Serial on the activation screen, the key is not accepted
(markedwith a red cross). On a machine without the trail, the
installation + serial works 100%.
What can I do?
D.

Hello dmostert,
I suspect that the issue here has already been partially
identified. You need to get a successful uninstall of the trial
version product prior to attempting to install the full retail
copy. Given that you have already partially uninstalled the trial,
I would suggest the following:
1) Download the trial version again (unless you still have
the download available).
2) Reinstall the trial version. It is possible that this
install will give a setup maintenance dialog. If this is the case,
simply uninstall and then skip to #4.
3) Once the trial has successfully been reinstalled, you
should be able to uninstall from add/remove programs. If it is not
listed there, simply re-launch the trial installer and it should
give you that option.
4) Install your full retail version and enter your serial
number.
Other things to note:
* The zeros and o's thing mention above is a common reason
for this failure.
* Fdisking the MBR is not likely to help in this particular
scenario as you still have many of the registry entries and files
left over from the trial install on your system, even after
deleting robo*. I would strongly advise against doing this.
* If the above solution does not work for you, you can use
the CS3 clean script to fully remove this product. Yes, it will
work, even though its not a CS3 application. You will need to run
it at level 4 (you will need to key in 4 manually). Please note,
this should be the last used solution as it will remove *all* Adobe
applications that you have installed.
http://www.adobe.com/go/kb402767
I hope this helps.
Thanks,
Bobby W
Adobe Customer Care

DIAPI - Create Goods Receipt for Serial Number - on Release Only

Hi Experts,
I need your advise to create Goods Receipt by using DIAPI, where the item is managed by Serial Number - on Release Only.
The option that I'm exploring is to use ‘Automatic Serial Number Creation on Receipt’ turned on.
In standard SAP function with the above setting, we can create a Goods Receipt without entering any Serial Number, and SAP will automatically creates empty Serial Number. I'm trying to do the same thing by using DIAPI with the below code.
oTargetDocument.Lines.ItemCode = 'abc'
oTargetDocument.Lines.WarehouseCode = 'whs'
oTargetDocument.Lines.UnitPrice = 100
oTargetDocument.Lines.BinAllocations.BinAbsEntry = 1
oTargetDocument.Lines.BinAllocations.Quantity = 1
oTargetDocument.Lines.Quantity = 1
'--       I skipped the below code, expecting SAP will create the empty Serial Number automatically
'     oTargetDocument.Lines.SerialNumbers.SetCurrentLine(0)
'     oTargetDocument.Lines.SerialNumbers.InternalSerialNumber = 2
'     oTargetDocument.Lines.SerialNumbers.Add()
'     oTargetDocument.Lines.BinAllocations.SerialAndBatchNumbersBaseLine = 0
oTargetDocument.Add
But, it returns 1470000838 - Invalid "SerialAndBatchNumbersBaseLine"; specify a valid "SerialAndBatchNumbersBaseLine"
Can anyone please advise how we should achieve this?
Any example or reference is very much appreciated.
Thank you and kind regards,
Krisma

Hi Krisma,
I was trying to simulate the issue here, but I couldn't post a good receipt PO even from the SAP itself with the setting you mentioned.
I have set the management method as 'On Release' and ticked the Automatic serial number creation flag as well under general settings of inventory. Is that the setting you mentioned or something else?
Best Regards,
J S L Geeganage

Problem with CS3 installation. Update Check doesn't accept serial number

Hey,
I have CS3 which I need to instal from one mac to another. It already has been deactivated and installed again as well. But after entering serial number I can see window called Updade Check and here my serial doesn't work. Technical support does not longer support old versions so they can't help me. But I need to run CS3 on this mac anyway. Can I skip Update Check step anyhow? Or what can I do to run this? Problem is I already cannot even use it on previous machine 'cause it already has been deactivated.
Does anyone know what should I do in this situation?

I want to but there is no option for that. I can't go futher without it.
Actually I don't even need to update anything but it seems I have no choice

Finding Dreamweaver Serial Number

I tried the Dreamweaver trial and then ordered and installed
CS3 from a DVD without uninstalling Dreamweaver. During the
download I saw the install software recognize the Trial Dreamweaver
on my hard drive and skip that install from the DVD. But now the
Trial is almost at the end of the 30 days and the CS3 serial number
I have from the DVD box doesn't work for registering Dreamweaver. I
tried Tech Support, but their systems are down. How do I get the
right Serial Number?
Jennifer, Golive refugee....

You can uninstall completely and then just install from the
DVD.
h

FI - Document Serial Number

HI
In our SAP implementation, we have one company code and 5 branches are created as business area. For FI document serial number, we dont want to maintain document serial number on company code level, instead we want to maintain separate serial number range for each branch. How can we do this in FI.
Regards
Anwer Waseem

Dear Anwer Waseem,
It is quite possible with BADI/enhancement. Hence, search for a proper BADI/Enhancement.
Please check this sample program from other thread to find BADI and enhancement for a given transaction code. You just need to create a custom program in your system by cut and paste below codes.
REPORT ZTEST.
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Alternatively, you can do the following:
1. For what ever transaction u want the enhancement .. just check for the System-->status (menu) and find out the PROGRAM name....
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for "Call Customer-function " ... and u'll get some search results .. If u get results then u have enhancement in that tcode .....
4. Then it actually calls a Function module .... copy the Function module name .... go to SE80 (object navigator) click on "Repository Information system" then Customer Enhancements .... Give the Function module name in the "Components" field and click Execute ....
ull get a list of Enhancements related to that Componene....
5. Choose which ever enhancement will suit ur business need ..
6. Go to CMOD... create a project .... assign ur enhancement ... and then code ur logic.... activate ur enhancement in CMOD ....... Ur Buisness need will be solved...
For a user exit......
Finding whether there is any User Exit or not for tcode VA42
1. For what ever transaction u want the user exit .. just check for the System-->status (menu) and find out the PROGRAM name.... ( The program name would be for our scenario "SAPMV45A" )
2. Double click on to the program name and go inside the program (Abap editor)
3. Search for the word "USEREXIT" .... u ll find all the user exits in the search result .. and find ur's then ...
Reward points if this is helpful.
Regards,
Naveen.

Deactivate Serial Number Generation in MIGO

Hi,
In MIGO,Serail number generation is made mandatory through Create serial no.s automatically checkbox in serial number tab.The process is such that the user will Check and then Post.So while pressing the Check button,internally serail numbers are generated and while posting the serial numbers are generated skipping the generated numbers in Check.ex.while checking 001 and 002 are internally generated and aftr Post if we check in IQ03 we get 003 and 004;ie 001 and 002 are skiiped.
Can anybody suggest how to avoid serial number generation while Check?

Hi,
Apply Transaction Variant and Screen Variant through transaction SHD0 for MIGO. Hope it will solve your problem.
Otherwise, discuss this requirement with MM Functional Consultant. In SPRO, it may have some setting to make it display...
Thanks
Vikranth

Serial number skips in RG23C part2

Similar Messages

Maybe you are looking for