Service Based Revenue Recognition - Prov Account Missing when using WBS

Hi,
I´ve activated RR functionality using service based and aceptance date.
I've followed the intructions from the best practices documents and the notes:
Note 820417 u2013 IMPLEMENTATION GUIDE FOR REVENUE RECOGNITION
Note 1172799 u2013 NEW VERSION OF BEST PRACTICES FOR REVENUE RECOGNITION
Note 678260 CONSTRAINTS
Note 777996 u2013 ACCOUNT SETTINGS FOR REVENUE RECOGNITION PROCESS
Note 779366 u2013 REVENUE RECOGNITION IN THE SD MODULE
Note 1166848 u2013 CUSTOMIZING SETTINGS
Note 782758 u2013 PREREQUISITS FOR USING REVENUE RECOGNITION
Note 835367 - Activating SAP ERP SD revenue recognition
Note 1000830 - Revenue recognition through incoming invoice (third-party
Note 1025066 - Revenue recognition by proof of delivery (POD)
Note 1120297 - Revenue recognition by acceptance date
Note 1125456 - Revenue recognition due to customer-specific event
We are implementing SD, FI (using New Gral Ledger), PS, CO and MM in a company that sells projects. Therefore we're posting everything to the WBS elements.
We need to post the revenue values to the WBS elements too.
The problem is that when we create a sales order for RR indicating a WBS element and try to save it, the system activates the incompletion log saying that the provision account is missing, despite the account is in VKOA.
The strange thing is that if we use a material with profit center (without any WBS or order indication in the sales order) all the revenue recognition process runs perfectly (we save the order, VBREVK is fullfiled, VF44 is run and the invoice is done correctly).
Does anybody know why when using a WBS element in the sales order, SAKN2 field is not fullfiled and the incompletion log is activated???
Is it a program error? Or are we doing something wrong?
Quick responses will be apreciated since we need to move on within two weeks!
Thanks in advance!
María del Valle Pintor.
Moderator: This thread has been locked due to crossposting.
Please do not post the same question in different forums.

sap note 883544

Similar Messages

Service based revenue recognition (u0091Bu0092) contract with call off

I am trying to understand Revenue Recognition. I have come across the above term." Contract with call off"
Can anyone tell me what exactly this means.

Dear sap
The contract consists of items defining the individual materials, material groups, or services with prices and in many cases quantities.
An item is assigned to an item category, which defines the type of procurement (e.g. item category K for consignment, or L for subcontracting).
An item of the procurement type "external service" contains a set of service specifications. Such specifications may be hierarchically structured. The summary view of such a hierarchical structure is termed an "outline", and the individual levels of the hierarchy are referred to as "outline levels". Quantities are specified in service lines. Services can be released (<i>ordered, or called off against the contract</i>) at item level or at the level of the service line.
Thanks
G. Lakshmipathi

Revenue Recognition :- Type A : Time Based Revenue Recognition in Contract

Hello,
I am facing a peculiar problem while creating the contract relevant for Revenue Recognition Type A : Time Based Revenue Recognition in Contract.
The Item category setting I am using is as follows:-
1.     Rev. recognition : A : Time-related revenue recognition
2.     Acc. period start : B : Proposal based on billing plan start date
3.     Revenue Dist. : A : Total Val.: Linear and Correction Value Linearly Distributed
I have already done the necessary activation of Revenue Recognition.
Done the account determination for following :-
1.     Revenue account determination (VKOA)
2.     Deferred revenue (VKOA)
3.     Unbilled receivables (OVUR)
Still when I am trying to save the contract the document goes into Incompletion asking for "GL account for item 10"
Where as in account determination analysis the system has already showing the
1.     Revenue account
2.     Deferred revenue account
Kindly guide further.
Thanks & Regards,
Amrish Purohit

Hi
you can overcome this issue of G/l account missing while saving the document is by assigning the Account key of that condition type in
img-> sales and Disrtibution->account assignment /Costing->revenue account determination-->defina and assign account keys
here you have to assign the account keys you are using for that condition type in pricing procedure against the same conditiontype in the accurals field.
this will solve your problem

Service-related revenue recognition

Hi Experts,
When post VF44 for a contract with Service-related revenue recognition (revenue recognition category B) get the message below. No RR FI document posted too.
<<Document for SD reference number u2018delivery orderu2019 does not exist
Message no. JHE019
DiagnosisDocument for SD reference number &1 does not exist. If accounting documents for revenue recognition have been created at collective processing level, you cannot navigate in the original document.>>
Any advise.
Cheers.

hi,
please check in scribd these is a link related to RR.
or
please check in forums on the same.
regards,
balaia

Am using firefox 5 and am not able of uploading any file as attachmenet using my Yahoo email account , this problem does not happen with hotmail account or when using IE.

when sending email through yahoo account , i cant upload any attachment with email, a sign of uploading lasts forever without uploading the file.
this issue do not happen with hotmail account or when using IE to browse Yahoo account.

Install ClamXav and run a scan with that. It should pick up any trojans.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Flash player controls missing when using embedding in HTML

Hi
I have just created a Flash movie with a .flv file in flash cs4 when playing the .swf file we can see the controls of the player, when I use the html code the player controls are missing.
it is missing when using the HTML that is generated with in flash as well.
this is the code used for the HTML
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<script type="text/javascript" src="swfobject.js"></script>
<script type="text/javascript">
swfobject.registerObject("myFlashContent", "10.0.0");
</script>
</head>
<body>
<div>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="272" height="400" id="myFlashContent" align="bottom">
<param name="movie" value="walkon.swf" />
<param name="play" value="true" />
<param name="loop" value="false" />
<param name="quality" value="best" />
<param name="scale" value="exactfit" />
<param name="salign" value="b" />
<param name="wmode" value="transparent" />
<param name="allowfullscreen" value="false" />

<object type="application/x-shockwave-flash" data="walkon.swf" width="272" height="400" align="bottom">
<param name="play" value="true" />
<param name="loop" value="false" />
<param name="quality" value="best" />
<param name="scale" value="exactfit" />
<param name="salign" value="b" />
<param name="wmode" value="transparent" />
<param name="allowfullscreen" value="false" />

<a href="http://www.adobe.com/go/getflashplayer">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
</a>

</object>

</object>
</div>
</body>
</html>
I would really like your help on this one
Thanks
Rodney

Hi,
Please check that your swfobject.js file is located where your .swf file and.html file are published. Your .swf file, .html file and swfobject.js should be placed on the same folder.
In my Flash CS4 the code generated in the HTML file is different and is having 318 lines of code. But the code which you pasted below looks different. If you are not able to see the flash content only in HTML file then it might be active content blocking. Please refer the link which provides fix for active content blocking manually.
http://www.adobe.com/devnet/activecontent/articles/devletter.html
Thanks

Revenue Recognition Analytic xApp misses standard BAPIs / Services

We have an opportunity to develop a SAP xApp Analytics for Revenue Recognition. This xApp is especially interesting for companies in the High tech, Software industry. One of the problems we are facing is that some of the BAPIs which connect to the ERP system are not in the SAP standard offering. Does anyone have experience or developed BAPIs / Services in the following area:
<b>Name: REVREC_01</b>
<u>Functional Description:</u> BAPI enable transaction VF45 (rather than BAPI enable direct table read) - In this way we maintain the same KPI presentation logic as in ERP.
<u>Inputs:</u> As for VF45 input, but Sales Doc must not be mandatory entry. Additional Input fields required such as Sales Org, Product Category, Material (All mutiple values) - Sold To Party must also be mutiple value input.
<u>Outputs:</u> As for VF45 Control Lines output and Revenues and Billing Docs (by Period) Output. In addition for both outputs we would require output by Sales Org, Product Category, Material and Employee Responsible. Also require additional KPIs in the Control Lines such as Revenue Recognised MTD and Rev to be Recognised MTD.
<b>Name: REVREC_02</b>
<u>Functional Description:</u> BAPI enable transaction VF44 (rather than BAPI enable direct table read) - In this way we maintain the same KPI presentation logic as in ERP.
<u>Inputs:</u> As for VF44 input. Additional Input fields required such as Sales Org, Product Category, Material.
<u>Outputs:</u> As for VF44 Output. In addition for both outputs we would require output by Sales Org, Product Category, Material and Employee Responsible.
Thank you,
Claus

SharePoint 2013 profile service account requirements when using "Use SharePoint Active Directory Import" option

Hi All,
I am trying to configure SharePoint Profile service. We would like a straightforward profile import from Active Directory.
On the "Configure Synchronization Settings" page, we have chosen the option "Use SharePoint Active Directory Import" option.
We have created a connection to the Active Directory using Configure Synchronization Connections page. We have specified the account that would be used for the import process.
Question:
I would like to confirm whether the account configured for the profile import need any special privileges when using "Use SharePoint Active Directory Import" option ?
Thanks,
Saurabh

Grant Replicate Directory Changes permission on a domain
To do this please follows below procedure
On the domain controller, click Start, click Administrative Tools, and then click Active Directory Users and Computers.
In Active Directory Users and Computers, right-click the domain, and then click Delegate Control.
On the first page of the Delegation of Control Wizard, click Next.
On the Users or Groups page, click Add.
Type the name of the synchronization account, and then click OK.
Click Next.
On the Tasks to Delegate page, select Create a custom task to delegate, and then click Next.
On the Active Directory Object Type page, select This folder, existing objects in this folder, and creation of new objects in this folder, and then clickNext.
On the Permissions page, in the Permissions box, select Replicating Directory Changes (select Replicate Directory Changes on
Windows Server 2003), and then click Next.
Click Finish.
Thanks & Regards
ShivaPrasad Pola
SharePoint Developer

Error:G/L account missing when saving Sales order

Hi Guys,
I will appreciate your input on this.
Whenever I try to save a Standard order for a particular material I get the error"G/L account missing. I have checked all the Account assigment settings and they are correct.
I faced this issue while creating an order for downpayments.This error occurs when we use the material of the kind "make to order".
Regards

Hi Pvarinder,
First please check the customer account assignment group at your sales order header level and material account assignment group at your item level.
If they are ok then go to Environment->Analysis->Account determination
As you said the entries are ok in VKOA, so my guess is I think you have some condition type which is not getting the right G/L account.
Please check and revert with your findings.
Regards,
MT

Iview contents missing when using FQDN Cisco Load Balancer

Hello Experts,
We are using Cisco load balancer to distribute the load across the portal servers. Everything was working fine, but after upgrades to the latest support package stack SP18, we ran into some odd behavior. Some of the contents on the iview are blank when using FQDN load balancer URL e.g. http://sap1234.corp.com/irj/portal . But those blank contents does show up if we donu2019t use FQDN e.g. http://sap1234./irj/portal . At this point we are not sure where to start troubleshooting?
Any helps would be appreciated,
Dave
Edited by: davidn on Feb 27, 2009 11:50 AM

Isn't this the same as your other post? I'm locking this one...

New GL FAGLB03 Abends when Using WBS Element as Additioanl Characteristic

Hello All:
I have added WBS Element as a Total Field to my ledger in FAGLFLEXT and it appears to be working.
I have also configured it as an Additional Characteristic for displaying line items from New GL Balance Display transaction FAGLB03 however, when trying to drill down to the balance by characterisitc WBS element, FAGLB03 abends saying that wildcard "*" (the default selection for Additional Characterisitcs on FAGBL03) is not numeric.
When using tranaction FAGLL03 instead the system works fine and allows me to select by WBS using Dynamic Selection.
I believe this may be a bug with FAGLB03 but would like to hear from others if they have experienced this or similar issue and/or if they know how I might solve it.
Thanks!
Gary

Hi Amit Agarwal,
I have a situation now, very similar as yours.
We wish to get the postings from IVA to Original Cost Objects at JVA.
Now the system brings just one Cost Object for IVA and all the other lines are without cost object splliting.
We really need the split and we are with New GL.
Could you help us?
Thanks a lot for your help.
Dante Souza

GL Account Missing when Posting Up GRPO

The scenario happen like this:
1) Customer creating a PO with 3 items.
2) One of the item that my client created needed to change warehouse, so they make an amendment through clicking into the Item master data, and change the warehouse from WSE 01 to HQ.
3) Then in the PO, they deleted the item line, added new row and selected the same item code again, update.
4) Then they copy the PO to GRPO.
5) Then they have the procedure to update the serial number for the machine.
6) After that, when they want to post the GRPO, it has an error message showing: G/L Account is missing [Goods Receipt PO - Rows - Warehouse Code][line:3] [Message 131-46]
Any idea on this issue?

Hi Micheal.......
You need to set all the mandatory settings required for the transaction documents.
You need to set the GL account determination. You need to set the Warehouse account GL
You need to set the Item Group account GL.
You need to set the Freight accounts.
You need to set the tax accounts.
You need to set the landed cost account......... Etc........
Regards,
Rahul

Insrument missing when using green Apple Loop

Greetings,
When dragging the green Apple Loop "Bread and Butter Bass 09" onto an audio instrument track in my arrange window, the result sounds very different than dragging the loop onto an audio track. When clicking on the "Bass" on the I/O of the channel strip of the instrument track, a small beige colored window pops up which says that it is the EXS24... which looks much different than the large green EXS24 (I presume the large green window is for the sampler and the other is not?).
Anyway, the EXS24 screen for bass says "MISSING: Thumbstroke Bass". Doing a search for Thumbstroke Bass reveals that there are three related files for this instrument on my system, and the file paths for each related file are as follows...
For Thumbstroke Bass.pst... Hardrive/Library/Application Support/GarageBand/Instrument Library/Plug-In Settings/Bass/Thumbstroke Bass.pst.
For Thumbstroke Bass.exs... Hardrive/Library/Application Support/GarageBand/Instrument/Library/Sampler/Sampler Instruments/Thumbstroke Bass.exs.
And for Thumbstroke Bass.cst... Hardrive/Library/Application Support/GarageBand/Instrument/Library/Track Settings/Software/Bass/Thumbstroke Bass.cst.
How can I get the green Apple Loop in my instrument track to sound similar to the way it sounds in the Loop Browser? If the problem is the missing instrument above (Thumbstroke Bass), then how can I get this instrument into my EXS24? Do all three files above need to be put into a special place?
I performed a scan update in my project manager... thinking that this would insert the necessary files into my EXS24, but I noticed no change in the menus on my EXS24 (the ? sampler too).
Thank you for the help...
Power Mac G5 Mac OS X (10.4.8)

Thanks to all for the very helpful responses.
Regarding Bee Jay's post...
The version of Logic that I am running is 7.2.3.
I recently added an extra internal hardrive (Seagate 500 gig, 7200 RPM) and installed the most up to date Tiger OS. I then installed Logic 7.01... a few weeks later, I upgraded Logic directly from 7.01 to 7.2.3 (bypassed 7.1).
In the process, I copied my garage band folder and portions of my Logic folder from my Seagate to my LaCie external hardrive with the goal of accessing instruments and samples from my LaCie. During recording, Logic is running on my Seagate, but the recording path records to my original hardrive. I noticed last night that the garage band folders on my LaCie and Seagate did not have the Thumbstroke Bass sample instrument files... whereas my original MacIntosh HD does have those files.
When installing the Tiger OS on my Seagate, I wanted to do a fresh clean install, and did not use Migration Assistant, and did not transfer any files from my MacIntosh HD which had Panther on it at the time. When updating to Tiger on the MacIntosh HD, I did a simple update preserving previous pref files, etc. (which explains perhaps why the Thumbstroke Bass files were not deleted on the MacIntosh HD).
I have some idea of some of the reasons this can happen.
The Garagaband instruments like "Bass", "Drums" and so on, are basically mini EXS24's. If you have a "Drums" instrument loaded, and load an EXS24 instead, the same instrument remains loaded and you can play it in the full EXS24 as normal.<<</div>
Yes, I have noticed the same above...
It turns out that there is a small amount of sample content that must be in a preset location - if it's not, Logic does not initialise any of the mini-EXS24's, and trying to load content that requires them will fail.<<</div>
Thank you, that makes sense.
My mini-EXS24's do seem to initialize, but they have the message "MISSING: Thumbstroke Bass". I presume that the small amount of sample content that *must" be in a preset location is not there... the question is... How do I get it there?
Try going to an instrument insert slot, and see which of the Garageband instruments you have available. In 7.1.x, there should be about 15 or so instruments - if you can only see about 9 or so, and can't see "Hybrid-basic" and so on, then this is an indication that you may have missing or moved Garageband content.<<</div>
My instrument slots show about 15 or so instruments under the Garageband instruments, and the "Hybrid-basic" is there. Should I be able to find "Thumbstroke Bass" in the instrument slot menu also? (so far, I have not been able to find it)
See my thread here for more details on this:
http://discussions.apple.com/thread.jspa?threadID=730936&tstart=0
Have a look and see whether this might be the problem you are having.
If not, then get back to me, it might be a case of your sampler instruments or samples not being found.<<
Very helpful thread... I see some parallels to my current problem. You wrote that you had aliased your "entire AppSupport/Garageband library to an external drive, which works fine with Logic and Garageband except the sample based instruments in Logic - they seem to ignore the alias and hence can't locate the *.exs and/or the samples which they need." At the time, I did not know that I needed to create aliases, but I think that aliases were effectively created when I simply clicked and dragged the files from one drive to another, correct?
The next step that you wrote about puzzles me... You wrote, "So after a big of re-jigging the library files around, I've ended having the "Sampler -> Sampler Files -> Hybrid Synthesisers" samples and the instrument settings in the real AppSupport/GB directory, with all the rest of the samples and GB loops on the external drive." I am confused as to which files and their paths that you are referring to...
Don't forget that "Scan" in the Project manager does not change anything.<<</div>
I see!
I had forgotten that, and yes, it did not change anything.
In order to relink your files, you'll have to perform the "Resolve instruments" option, which goes and relinks sampler instruments with their required samples.<<</div>
THANKS!
However, after opening the Project Manager, I cannot find anything in the drop-down menus for "Resolve instruments". How do I get there? Do I need to do another scan to get there?

Document operations missing when using my palette

Hi,
after a lot of trial and error I have finaly managed to get a custom palette running in my Photoshop CS6. The problem I have now is that when my palette is active I am missing some functions from the Photoshop File-menu, i.e 'New', 'Open', 'Browse'. Is this to be expected?
My palette code is based on this: http://www.davidebarranca.com/2012/10/scriptui-window-in-photoshop-palette-vs-dialog/, the 'PS palette working example' section
main();
function main()
          mainWindow = createGui();
          isDone = false;
          mainWindow.onClose = function()
                    return isDone = true
          mainWindow.show();
          while (isDone == false)
                    app.refresh();
function createGui()
          window = new Window("palette", "Material Picker");
          window.center();
          return window
Could it be that this code is preventing Photoshop from running all functions?
I would really like to have this running in a dockable panel in PS but I havn't found a way yet. Any suggestions are very welcome.
Thanks,
Johan

I see. So when you scan, copy, or fax through the ADF, it acts like everything is working fine, but nothing copies, nothing scans, and nothing faxes. When you use the glass, scan, copy, and fax work fine. The c6180 has two seperate scanner lamps, one for the ADF, and the other for the glass. It sounds like the ADF lamp has gone out. There are a few things you can try to get it working again outlined here, but most likely if it's gone, it's gone. The scanner lamps aren't something that you can replace seperately from the printer. To replace the scanner lamp you gotta get a whole new printer. If you can make due, then I would hold off, but if you gotta have it and the document doesn't fix it, you gotta get a new one. The down side to getting a new one, for you at least, is that the PhotoSmart printers don't have traditional faxing anymore. To get taditional faxing you have to get an OfficeJet or a LaserJet. The OfficeJets will use way less ink than the PhotoSmarts, but the photo printing quality isn't quite as good, and the scanning options tend to be more limited. The LaserJets are the most stable printers made. They are efficent and will last almost forever, because there isn't alot that moves so there isn't alot that can break. The downside to LaserJets is that they can be a larger initial investment, more so if you want color printing, but they do pay for themselves in the long run.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Text Missing when using PDF Convert but OK when using print PDF

I am using Acrobat Pro 9 in Wnidows 7 and Microsoft Publisher 2003.
When I use the CONVERT command to create a PDF - it is missing all of the text on the master page.
If I create the PDF with the PRINT command - everything is OK.
PS: The same Publisher File on another computer using Acrobat Pro 8 works fine - CONVERT or PRINT and no missing text
I prefer to use convert because sometimes the PRINT command drops some of the hyperlinks.
[email protected]

You're posting in the wrong forum, but you already know that...
In any case, if you're running XP (you didn't supply any info about your environment, which is critical), there's a Microsoft HotFIX patch for PostScript printers such as Acrobat to fix the missing text problem. Do a Google for "Framemaker hotfix missing text" to locate the patch.

Service Based Revenue Recognition - Prov Account Missing when using WBS

Similar Messages

Maybe you are looking for