Service contract list for plant
Hi
How to query from a table for the Service contracts created for a particular plant.
I tried EKKO table , but could not get for a particular plant.
Can anyone guide me how to get the list.
Thanks in advance
Gururaj
Hi,
u have to join the table ekko and ekpo.
in ekpo u will get the field EBELN. u have to filter the EBELN for contract with the following value.
PSTYP (ITEM CATEGORY) = 9(SERVICE)
KNTTP (ACCOUNT ASSIGNMENT CATEGORY) = K(COST CENTER)
and from EKKO table u have to take the field
BSTYP (PURCHASING DOCUMENT CATEGORY) = K (CONTRACT)
u will get the list of service contract.
regards
jash
Similar Messages
-
Missing Part list for Plant to Plant Purchase order
Hi,
I need the following requirement in CO24,
In CO24 its shows the missing parts for Sales order, similarly we want the missing parts list for Plant to Plant Purchase order in the same report. Also the report,
1.It should not consider the Planned order for a sales order.
2.It should not consider the planned order which can be convert into purchase requisition.
3.The procurement type should be "E" or "X".
Kindly guide me is there any standard layout changes in available or any development we have to do.
Thanks
Muthamil Murugan.GHi Purushothaman,
If you have the following settings in OPJK:
Plant XXXX
Order Type XXXX
Availability Check 2
[X]Status Check
[X]Check material availability when saving order (may not need)
Checking Rule PP PP checking rule
Component Check Type ATP check
Release material 2 Release permitted despite missing parts
Then in COHV you try to mass release the order with the following parameter:
List: Order Header
Selection: Your selection criteria
Mass processing:
Function: Release
Max. No.of Processes 99
Save Log: Always
Release control order: Collective Order Release
Then after the order is released, you can find the missing part list of that order in CO03 menu path:
Goto->Missing Parts->Missing parts list
Hope it helps.
Regards,
Rachel -
Service Contract Determination for material product
Hello,
I am trying to implement service contract determination for a complaint and I observe that the service contract gets determined at the complaint item level only when I add a service type product at the item level and not when I add a product of material type. Is this a system limitation that a service contract can be determined only for a service product or am I missing some configuration? Has anyone else faced a similiar issue?
Thanks,
Divya.hi divya
the contract get determined even after adding product of type material
1.create a srv contract (sc)
2.add product of type material
3. release the contract and save it (note the no.)
4.create a trnx complaint(crmc) maintain the setting fr contract determinition(F)
5.put the product in trnx and ur contract will get determined
see if it suffice ur requirement
"reward points if u find useful" -
Service contract determination for service request
Hi,
is there a way to influence the contract determination in a service request creation process?
The contract should be found if there is one for sold-to-party OR ship-to-party.
Thank you.
Kind regards
ManfredHi Manfred,
I don't know about "Ship-to arty" use in contract determination. AFAIK Sold2-Party, Sales and Service Organization, status of the Service Contract (released), Start and End date and the object list are responsible for the Contract determination. Hence if I'm not wrong a sold2-party must be provided.
There is the CRM_SERVICE_CONTRACT Badi and what we did in our process is to use the Event framework to ensure a contract redetermination after change of the sold2-party. Take a look at CRM_SEARCH_SERV_CONTRACTS_EC for ideas in that direction.
Regards,
Hendrik -
Service contract determination for support messages
Hi Gurus,
I have the requirement for automatic determination of service contract for support messages created.
Which rule i should use for automatic determination of sales and service organization for the support messages
Please help me
regards
NaveenHello Solman Gurus
Please help for my issue,,, if anyone could...
Full points will be rewarded
regards
Naveen kumar -
Hi
How could I list the Contracts avilable in a particular plant.
Example: ME1L I could list all the Info records avilable for the plant.
As such which Tcode could support for listing all the contracts for the plant.
Thanks in Advance
Regards
RGhi frnd..
there are various reports Such As ME80rn, ME80FN, ME2K, ME3K....
put your plant and select Purchasing doc. cat. as "K" and execute ther report...
Amit P Hiran
njoy SAP....
Njoy lyf... -
Is it necessary to create a Billing Plan for the Service Contracts
Hi All,
Is it necessary to create a billing plan for the service contracts.
My requirement.
In CRM 7.0, we created a service contract. For the item in that service contract there is a Billing Plan tab.
In that tab we have the dates for Period, Billing Date etc.
Now our requirement is to get the Billing Date quarterly. For this we created date rules and date profiles and assigned these date profiles to header and item level transactions.
And we are able to see the date rules under the drop down of the billing date.
I copied the standard date rule BILL004 to ZBILL004.
But when we changed to our date rule it is not changing to quarterly date.
Can you please let me know what are the configurations to be done for this.
Is the billing plan has to be created for this kind of scenario.
Thanks in advance
Thanks and Regards,
RaghuHi
On OK button's action you can Destroy the window and navigate to Page1.
Go through this link for more details and a step by step guide for creation of pop ups and dialog boxes
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/903fed0d-7be4-2a10-cd96-9136707374e1?quicklink=index&overridelayout=true
Hope it works
Regards
Suresh -
Get the next new item number of service contract va43
Hi Experts,
I have to get the next new item number of the service contract (va43)
For example: I have the service contract number like 50100929
For this existed line items like 10,20,30
in this case The next new item number is 40.
How we can get this number .
Could any one suggest me.
Thnx,
Jaya.Hi Nitish,
Thnx for Reply,
Acually I have to create the new item to the existed service contract , for that I am using the FM 'BAPI_CUSTOMERCONTRACT_CHANGE' .
1 . Except the Item numebrt, if I pass the remaing data like (material,plant) I will create the new Item in the service contract.
2 .But for the same new Item if I pass the condition data with out the Item number it is going to short Dump ( In the short dump it showing Item number is missed )
I should do the above steps ( 1 & 2) at a time using the FM 'BAPI_CUSTOMERCONTRACT_CHANGE' other wise performancely its taking the time.
Thnx,
Jaya. -
Create Follow-up document from Service Contract automatically while saving
Hi,
In CRM 4.0, under the Service secnario, Service Data for Service Contract is related to --
1. Interval value
2. Period
Based on these parameter values how to generate the corresponding follow up documents automatically while saving the parent doucment(i.e Service Contract).
For ex, Interval = 6 , Period = 36, then all the 6 docs should be genarated at once while saving the Service Contract.
Please Advice.
Regards
DebHi
Yes , manually executing the Action through PPF.
But the requirement is to generate the subsequent docs at once while saving the Service Contract i.e the corresponding Action should also triggered automatically.
Please Advice.
Regards
Deb -
Service PO with reference to Service Contract "Qty appearing as '1' in PO"
Hello Gurus,
I am creating a service PO with reference to a service contract. For service line there is lets say "1500" qty but while adopting the service lines from the contract to PO, system pick the qty as "1" only eventhough "1500" is remaining for PO release.
No other PO is created for this qty and for this contract.
Thanks in advance....
Malviya....Hi,
Usually a contract is created for establishing a price with the vendor.
This is the reason for is the only purchasing document which can be
created without quantities. The quantity in contract has the purpose of
limitation, as a guideline for all orders created with reference to
that contract and is not an immediate requirement like a quantity in
purchase requisition, for example.
When a purchase order is created with
reference to a contract, the services selected from that contract will
have ALWAYS the proposed quantity 1, and was designed and hard coded to
be like that.
Regards,
Edit -
Not able to create Service Contract from another svc.contract as followup
Hi,
I am trying to create a service contract from another service contract as folllow up document as a part of contract renewal process. However, when I click on follow up button, in the popup, not able to the option Service Contract. Hence I am unable to create.
Could you please let me know, what needs to be done such that Service Contract also will be shown in the popup.
Thanks for all the replies.
Thanks,
SandeepHello Sandeep,
It is not possible to create a follow up service contract (BUS2000112) for another service contract (BUS2000112).
I do not know your business scenario, you can debug method GET_FOLLOWUP_CUST of class CL_CRM_UIU_BT_GET_PROCTYPES and see where the follow-up transaction types are filtered out.
I met similar case before, the solution provided at that time was
- modify FM CRM_UBB_FILTER_SUC_PROC_TYPE in line 49. You can comment out the following line:
delete ct_suc_proc_type where process_type = ls_suc_proc_type-process_type.
Hope this could be helpful.
Best regards,
Maggie -
T500: Keyboard service parts list, which manufacturer?
Dear Community,
The keyboard service parts list for the T500, located at http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-71050, has a FRU column for each manufacturer, but doesn't specify which column belongs to which manufacturer (= manufacturer names are missing from the column headers)...
Also, that page features 2 lists, without specifiying what the difference is.
Does anybody know which is which, or could Lenovo staff fix that page, please?
Thanks,
-marcI just started having this issue in Windows 7 SP1 on a brand new ThinkPad W520 with a Mini Dock Plus Series 3 (170 W).
If I have a keyboard plugged into the dock, and I undock and re-dock, the keyboard will no longer accept keystrokes.
It appears in the Device Manager as working correctly, but just ignores me.
Unplugging it from the USB port and plugging it into another USB port, either on the dock or on the laptop itself, has no effect.
Undocking and re-docking again has no effect.
The only way to get keystrokes back from any affected keyboard is to restart the machine, which is incredibly inconvenient!
I have no trouble with any of the other hardware plugged into the dock, including a mouse and an external sound card.
I have tried now with two totally different keyboards so I know the problem's not related to drivers for the keyboards themselves.
I believe it actually doesn't work for ANY keyboard other than the laptop itself once you've undocked and redocked, even if it wasn't plugged in at all before the undocking/redocking, as long as *some* keyboard was. (I'm not in a position to verify that right at the moment but I think that's the case.)
Interestingly enough, using the ThinkPad USB Keyboard With TrackPoint (SK-8855), while the keys do nothing, the trackpoint mouse in it still works. Bizarre!
I've updated the BIOS, the Intel chipset driver, and the UltraNav driver, and these have had no impact at all. I don't know what more to do, and this is a major, major productivity drain for me. -
Missing part list in plant maintenance ( CO 24)
Hi SAP experts,
Is it possible to use the transaction CO24 ( missing part list) for plant maintenance orders? If yes, what are prerequesites & configurations needed for it?
RegardsHi,
I think CO24 can be used for Maintenance Orders too.... as there is no order category field mentioned in the selection screen.
Try for one the PM order and check ... currently I don't have any PM order other wise I would have checked and let you know....
Hope thsi will help you.
regards
radhak mk -
Service contracts & document types
Can anyone provide insight on how to setup document types using P40040 for service contracts. For amortization of fixed price contracts, are you using service contracts
Hi
please check this in path
Spro-Financial accounting-Financial accounting globe setting-tax on sales or on purchase-Basic Setting-Check calculation procedure-Define Procedure
Here check taxinn procedure you have define use stander TAXINN or create ZTAXINN
and check which condition has define there, analysis that which goes to g/l account and which goes to inventory
Regards
Kailas Ugale -
How to get price list line id for service contract line(subline)
Does some one know how to find a price list line id for service contracts line (sub line)?
There is actually a column in table okc_k_lines_b which is called price_list_line_id, but it looks like it is never used (all columns values are NULL). I have tried to investigate reprice API's which are used in contracts authoring form, but they are too huge and it didn't lead to nay result. There is a way (bad hack), by calling OKS_QP_INT_PVT.COMPUTE_PRICE it is possible to get price list line id by which contract line is priced, it would be kina fine if I would need to find line id for some rows, but it wont work for thousands!
Is there some proper way how could I get price list line id by which is service contract line priced?Hi,
Check out the following query that gets the price_list_id on subline_level and more.
The price_list_Id is stored as a rule.
SELECT
chd.contract_number
, par.party_number
, par.party_name
, ldf.pas_nummer
, ldf.pas_houder
, rh.object1_id1 hdr_price_list_id
, rsl.object1_id1 sl_hdr_price_list_id
, pld.parkeerterrein
, msi.segment1
, sit.description
FROM
okc_k_headers_b chd
, okc_k_lines_b clt
, okc_k_lines_b cls
, okc_k_lines_b_dfv ldf
, okc_k_items cit
, okc_rule_groups_b rgh
, okc_rules_b rh
, okc_rule_groups_b rgt
, okc_rules_b rtl
, okc_line_styles_b lst
, okc_rule_groups_b rgs
, okc_rules_b rsl
, okc_line_styles_b lss
, qp_list_headers_b plh
, qp_list_lines pll
, qp_list_lines_dfv pld
, qp_pricing_attributes pat
, mtl_system_items_b msi
, mtl_system_items_tl sit
, hz_cust_accounts cac
, hz_parties par
WHERE
rgh.chr_id = chd.id
AND rh.rgp_id = rgh.id
AND rh.jtot_object1_code = 'OKX_PRICE'
AND cac.cust_account_id = rtl.object1_id1
AND par.party_id = cac.party_id
AND clt.chr_id = chd.id
AND clt.lse_id = lst.id
AND lst.lty_code = 'SERVICE'
AND rgt.cle_id = clt.id
AND rtl.rgp_id = rgt.id
AND rtl.jtot_object1_code = 'OKX_CUSTACCT'
AND cls.cle_id = clt.id
AND cit.cle_id = cls.cle_id
AND cit.jtot_object1_code = 'OKX_SERVICE'
AND cls.lse_id = lss.id
AND lss.lty_code = 'COVER_ITEM'
AND cls.id = rgs.cle_id
AND rgs.id = rsl.rgp_id
AND rsl.jtot_object1_code = 'OKX_PRICE'
AND plh.list_header_id = rsl.object1_id1
AND plh.list_header_id = pll.list_header_id
AND pll.rowid = pld.row_id
AND pat.list_header_id = pll.list_header_id
AND pat.list_line_id = pll.list_line_id
AND cit.object1_id1 = pat.product_attr_value
AND cit.object1_id2 = chd.authoring_org_id
AND msi.inventory_item_id = cit.object1_id1
AND msi.organization_id = cit.object1_id2
AND sit.inventory_item_id = msi.inventory_item_id
AND sit.organization_id = msi.organization_id
AND sit.language = userenv('LANG')
AND cls.rowid = ldf.row_id
Hth,
Martin
Edited by: mvdons on 4-sep-2008 2:13
Maybe you are looking for
-
Error while testing sender SOAP scenario from XMLSpy-but can test from RWB
HI, I developed one scenario with sender SOAP adapter and Receiver side ABAP proxy. Now I want to test my scenario. I tested my scenario successfully from RWB-->Integration server Integration Engine. ( it posted successfully and I can see checked f
-
How to customise and navigate Content Type - SharePoint 2013 List
I need some advice here. I'm customizing forms that have list built using Content Types. I noticed the difference in the links is something like this below I have one default content list type called item and the other one is called College Form Item
-
IPhone sending message as imessage instead of SMS to Nokia
My wife has switched to a Nokia Lumia and given me her old iphone 4. The iPhone has been unlocked and resynced and everything has switched over successfully, The only issue is that, when I try to send her a text, my iPhone (her old iPhone) tries to s
-
I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor. Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you
-
Hi all Can someone point me in the right direction, im after an sms reminder for my N80, dont mind paying as long as it works, can anyone help???? Thanks Pete ;-)