Service Desk Contract Error

Dear All
We are in process to confiigure SLA in service desk. we have created one new service contract of transaction type SLFV, org. data profile is SLFN0000002. We released it  at item level  (under status tab ) & it showed us Released for ATP Check but when we are trying to release it at Header level , it is not listing any release option in status tab (it is only listing in process & completed options).
And in our contract it has five errors which are listed below
Error      Header Data     Sales organization Sales does not exist     
Error       Header Data     Org unit (sales) does not have these attributes
Error       Header Data     Pricing data for partner 655 could not be read
Error        Item 100     Sales organization Sales does not exist     
Error       Item 100     Org unit (sales) does not have these attributes
kindly guide whether just becuase of the above errors it is not providing the release option ?
Thanks in advance
Regards
Kapur

HI Kapur,
do you resolved this error, but got have service contract determined in SLFN?
Tks and regards..
Juliano Viana

Similar Messages

  • Service desk message error

    Dear Experts,
    Am not able to create the service desk ticket from the sattilite system.
    It is giving the following error.
    Error in Local Message System: Error when op
    an RFC connection Message was Not Created
    Error in Local Message System: Error when opening an RFC connection Message was Not Created
    Message no. BCOS088
    Please suggest.
    I have all rfc authorization , support desk roles to my id  and also the BCOS_cust i have given the entry.
    Regards,
    Umesh

    Hi Umesh,
    It could be a lot of things,
    firstly check the BCOS_CUST setting, If instead of BACK, you're using TRUSTED it could be checked for
    current user. In this case the user connected will need the trusted authorizations S_RFC and S_RFCACL(not contained in SAP_ALL profile) are assigned on both systems. In case it is not "current user" you should check the user used in the Trusted.
    In general this should solve it.
    Kind regards,
    Fabricius

  • Service Desk: Pricing data for partner could not be read

    Hi all,
    I am trying to configure the Service Desk functionality for Service Providers (on EHP1).
    I follow the SAP Documentation (SAP Solution Manager: Service Desk for Service Providers) and SLA's made easy in SAP Solution Manager. Also some discussion threads helped me with some steps (I applied e.g. the recommendation from Pricing data for partner 106 could not be read. , but it didn't help).
    I am facing some errors related to the CRM part of the configuration.
    When I create Service Desk Contract (SLFV) in CRMD_ORDER, the error appears Pricing data for partner xxx could not be read. I checked the setting of BP and I am not able to find the reason, for customer's (sold-to-party) BP the sold-to-party > Sales Area Data the Sales Organization/Distribution Channel/Division are maintained. Which information for pricing is needed and where can it be configured?
    Another error - I am sure it is related to the first one - the service contract cannot be determined in the service message (in Item details view under product). The error messages are about sales area/organization, so I suppose there is something wrong with the link Service Contract -> Business Partner definition.
    Could you please help me what can cause the error?
    Thanks in advance,
    Vaclav

    Hi Balaji.S,
    my problem was solved when I double checked the settings of org structure. That means there must be a consistent setting for sales organization / distribution channel / division in businness partner (tcode BP), organizational model (PPOMA_CRM), product workbench (COMMPR01). The setting must be same for both the sales department of the service provider and the customer's company (I am sorry I am not CRM, so I am following just this simple logic)
    In the long text of the error (in CRMD_ORDER) I could see "expected" combination for sales organization / distribution channel / division (message e.g. The access was carried out with sales organization 'O 50000613', distribution channel '01' and division '') -> when the org model was set up everywhere in this way, the contract was automatically filled by the organization data and in the next step the contract could be determined in the service desk message.
    Anyway it took some time to find out the correct combination. Deeper CRM knowledge would help me much.
    Vaclav

  • Error creating Service Desk Message in Satellite System

    Hi all
    We have two satellite system from which I want to create a Support Message. With my current profile/role and can do it from one system and not from the other system. I get "Error in local message system, message xxx not complete". I dont think it is an Authotization fault, but not sure.
    How should the Number ranges be setup for more than one satellite system?
    Thanx
    Jaco Snyman

    Hi Tina
    This was my answer in a previuos thread:
    Hi all
    I also struggled with this for 2 weeks. But the problem is fixed.
    Do your "normal: config from the IMG and then:
    1) Make sure that you have selected for the system NOT to check for the User in SolMan
    tr: DNO_CUST04, Go to Detail, Select the field NO_USER_CHECK, "X", this is very important, otherwise you will have to create a username for everyone on the satellite system... far too timeconsuming.
    2) In your satellite system under OSS_MSG: Col1:Application: OSS_MSG, Col2: + : W. Col3: RFC Destination: SM_"SOLMANRFC"_BACK. Col4: + : CUST620. COl5: + : 1.0
    In the Solman side you maintain Col3 as "NONE".
    3) Make sure that ALL users in the satellite system has the following roles: SAP_SUPPDESK_CREATE and SAP_SV_FDB_NOTIF_BC_ADMIN.
    4) Make sure that you have TRUSTED RFC to and from your Satellite system and Solution Manager.
    The main one to be sure of is: SAP_ALL for all SOLMANxxx user in the Solution Manager system for every satelite system, because the standard roles from SAP does not work.
    This should have your Service Desk Messaging working.
    Jaco Snyman

  • Service desk error creating support message "help- create support message"

    Hi
    I'm customizing SM 7.0 SP Stack 15 service desk scenario. I'm in a VAR SAP, so It's a mandatory scenario.
    I've done all basic settings from General Settings, Connection to SAP, Online Documentation, ...,
    Business Partners, iBase, Basic BC-Sets for Configuration, Number Ranges. After them , for Scenario-Specific Settings-> Service Desk->Service Provider I've done all these steps. At SAP System Solution Manager, I've created solutions at dswp transaction and EW Alert are centralized these steps works. Transaction notif_create works and iBase are well mantained.
    The problem is when I try create a support message from satellite SAP system. I logged With a SAP user which is BP, key user and has authorizations in a satellite system and I choose help->create support message, so a pop-up appears and I fill the fields, and I press button (Save/Send). An error appears:
    Error in Local Message System: Access via 'NULL' object reference not possible. Message was Not Created
    In order solve the error I review:
    - The satellite SAP system is at the iBase installed components.
    - I've Assign Number Range for ABA notifications at SLF1 transaction.
    - I've Checked number range for Service Desk Message at SLFN transaction.
    - I've configured ABA Message transaction DNO_CUST01, transaction DNO_CUST04
    - (satellite system) Transaction sm30, table BCOS_CUST:
       Appl.            +       Dest.                                  +                     +
       OSS_MSG   W     SM_SMGCLNT010_BACK    CUST620          1.0
       TST_CUS                                                        0120009939
       RFC SM_SMGCLNT010_BACK works, SM recollects EW Alert from this satellite system
    - (satellite system) I logged with a SAP user with these roles:
      SAP_SUPPDESK_CREATE
      SAP_BC_CUS_CUSTOMIZER  according SAP NOTE 834534
      SAP_BC_CUS_ADMIN       according SAP NOTE 834534
      SAP_SV_FDB_NOTIF_BC_CREATE
      SAP_SV_FDB_NOTIF_BC_ADMIN
      All these roles are mantained.
    - I've review SAP Notes 834534, 864195, 621927(I haven't applied this SAP Note because it's older)
    Please could you help me?
    Thanks and Regards
    Raul

    Hi,
    When I try create a SAP message via help->create suuport message, I get the same error so I run help->create support message in a satellite system so I run help->create support message in Solution Manager
    system. Also, a dump is generated in Solution Manager when I try create support message or from satellite or from solution manager.
    ========================================================================
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Date and Time          10.07.2008 10:17:26
    Short text
        Access via 'NULL' object reference not possible.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_BOR_SERVICE_PPF============CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: " ").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "OBJECTS_OBJREF_NOT_ASSIGNED" " "
        "CL_BOR_SERVICE_PPF============CP" or "CL_BOR_SERVICE_PPF============CM004"
        "PROFILE_CONTAINS_PARTNERDEP"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
    Information on where terminated
        Termination occurred in the ABAP program "CL_BOR_SERVICE_PPF============CP" -
         in "PROFILE_CONTAINS_PARTNERDEP".
        The main program was "SAPMSSY1 ".
        In the source code you have the termination point in line 41
        of the (Include) program "CL_BOR_SERVICE_PPF============CM004".
    =========================================================================
    Thanks and Regards
    Raul

  • Service Desk: Support team determination - Action Logs error

    Hello experts,
    I have customized the service desk functionality in Solman 7.0 EHP1 according to SAP help and the various (very helpful blogs from sdn). When I create a message from satelite system the "Support Team" field is already filled with the correct  business partner, but when I look into the ACTIONS tab I see the following error message (red light) "Find support team responsible, when message is created". In the processing log I have the following entries:
    "Processing CRM_DNO_PARTNER_1 Is Started"
    "Action could not be successfully executed".
    Additional no Email is sent to the BP SUpport team even I have customized it accourding to the blog from Tammy Powlas "Service Desk Support Team E-mail Notification".
    When I open the created message in change mode and save the message (without any changes), then the email is sent correctly.
    Can anyone give me a hint, what I did wrong.
    Thanks in advance,
    Thomas

    Hi Thomas,
    When the PDF is generated during the creation of the message, some information is not yet available to the smartform program, so most of the fields are not filled. In order to have the complete PDF, you have to send the e-mail after the document is completely created, which means using the processing time "Processing when saved" (and then you have to open the message and save), or via Job using the Processing time "Processing using selection report", and scheduling the job as mentioned by Cristiano. In this case no e-mail will be created immediately as you wish (I did not use "sent immediately" , but "created immediately", because it also depends on your SCOT job which will send the e-mail). In my case I did not need to send in the e-mail details such as System ID, SAP Component and System details to the Support team, only the message number, priority and description.
    If you decide to schedule the job, create a variant as explained by Cristiano. Enter the Application CRMD_ORDER, Action profile, Action definition if you want to specify which action or actions you want to execute (if you only want to schedule the job for your email to support team action, put this action definition here), Promotion status "0", keep empty field Processing type (do not put INT for e-mail), and select Processing Time "Processing using selection report". Keep dates in blank. Set  "Processing without dialog" on. It's very important that you configure your action to be executed via report, as I said in the beginning, otherwise the job will not work and you will have the "0 actions have been selected" message. Also schedule your job periodically with a very short interval if you have many messages created each hour. It also depends on your SCOT configuration. The CRM action job will only send the e-mails to the queue.
    The business partner assigned to the user that holds the position below the org unit should be entered in the message processor field, but this should not cause any error in the action that determines the Support Team business partner, as this field is correctly determined. Did you configure any other action or BADI to fulfill the message processor automatically? The standard SLFN0001_ADVANCED_FIND_PARTNER action as far as I know will not do it.  I have Solution Manager 7.0 with SP25 and I don't have any error message in the FIND_PARTNER action, it is all green.
    If you did not create yet any action or BADI implementation for the message processor, and if you have only one business partner (person) assigned to your support team, as you described (one Org Unit, with one position and one member), you can do the following:
    - Go to the Access Sequences definition and copy access sequence 0009 (organizational data: employee for an org. unit). In the Individual Accesses change the Source from Department to Support Team.
    - Go to the partner determination procedure and for the SLFN0004 select the access sequence just created.
    This access sequence uses Rule AC10000258 to determine the business partner Employee of an Org Unit.
    Try to create a new message and check if it works. This rule does not work if you have many members below one support team.
    You may also check SAP note [1041455|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1041455].
    Regards,
    Raquel
    Edited by: Raquel Cunha on Mar 3, 2011 4:30 PM

  • Service Desk: error while sending message to SAP

    Hello Gurus,
    I have configured Service Desk in Solution Manager. When i create a message in one of my Satellite Systems the message appears in Solman but when i try ro send the message to SAP i get the following error.
    "You do not have authorization to Send or Compare a notification"
    The user has SAP_ALL and NEW and the same has been maintained in AISUSER table. After i get the error i executed SU53 but there are no missing authorization.
    Can someone please tell me what the problem could be?
    Regards
    Anil Verma B

    Hi,
    Apart from the SAPOSS, SAP-OSS, SAP-OSS-LIST-01  rfcs, pls ensure the basic authorizations for solman has been verified and given.
    SAP_SUPPDESK_ADMIN
    SAP_SUPPDESK_CREATE
    SAP_SV_FDB_NOTIF_BC_ADMIN
    Please also verify if you had the BADI settings done correctly as per note
    1140822    SAP customer number for installation number &1 unkn
    Hope this helps.
    Cheers
    Sh

  • Error in Service desk message

    Hi
    I am facing one error in Service desk related to message text .
    Some of the characters of message entered by the customer is getting truncated when we see the message details in the transaction data tab in the service desk. Due to this we are not getting the full description of the support message.
    Is any note is available for this?
    Best regards
    Sarang

    Hi
    Please find the reply in Bold :
    What Sol Man release are you workin on?
    SAP Solution Manager 4.0
    What kind of characters get truncated?
    General message characters (English alphabets)... is this because of length constraint?
    Are you working on a unicode system?
    Yes
    Does this happen while creating messages from a satellite system or from within Sol Man?
    When user creates messge in SAP ECC 6.0 , then the sme of the last characters of each row gets truncated.
    Best regards
    Sarang

  • Error on Service Desk Configuration

    HI,
        While configuring Solman 4.0 for service desk(sp9 patch level). i am getting error
    "Because of error 513, no message was created in Support Desk System". in satellite server.
    I already config below thing in system:
    No. range in Solman
    BCOS_CUST table entry
    BACK RFC in Satellite with user having Role to create Msg in solman.but in sprocheck number range for service desk messageSLF1--goto-details-on transaction numebring i gave int.No.Range No-1,when iam giving Ext.No.Range NO-2 its not taking.
    guide me for to resolve the error.
    Thanku

    Hi,
    You need to check several things.
    For example sppfcadm ' in the notif_create, set parameter to SLFN or your customized transaction type.
    For
    You need the follwing role.
    SAP_SUPPDESK_CREATE
    SAP_SV_FDB_NOTIF_BC_CREATE
    After that please check the following authorization objects in the
    PFCG:
    SAP_SV_FDB_NOTIF_BC_CREATE
    Cross-application Authorization Objects
    - Follow-Up Functions for Notifications
       Notification Type: SLF1 (Assign the value SLF1!!!!)
    SAP_SUPPDESK_CREATE
    CRM component:
    - CRM Component
       Authorization Object CRM Order - Visibility in Org. Model
        Business Transaction Type: SLFN (this was missing)!!!!
                                         you have to maintain the SLFN.
    You also need to check you rfc connection 'NONE' to create a basic notification.
    If this still can not work.Please search note for 513 error. It's a common error.
    By the way , sp9 is too low. If you'd like , you can upgrade to SP17.
    Best regards,

  • Error in Solution Manager - Service desk

    Dear all Hi,
    i need your help please.
    i try to create o service desk message from an ERP system -> Solution manager.
    when i have SAP_ALL (for the user in the Solution Manager system) the message is created fine
    and i can see it and proccess it fine.
    when i take off SAP_ALL i get the following error : 'Because of error 513, no message was created in Support Desk System'., even though i have the following authorizations to the user:
    SAP_S_RFCACL
    SAP_SMWORK_INCIDENT_MAN
    SAP_SUPPDESK_CREATE
    SAP_SUPPDESK_DISPLAY
    SAP_SV_FDB_NOTIF_BC_CREATE
    can someone please help ???
    thank you in advance.
    George

    Please find the following points which cause error 513.
    1. The client was not completely created by the copy of Client 001.
    2. The BCOS_CUST table was not maintained correctly.
    3. Missing authorizations for message creation (correct: roles copied from SAP_SV_FDB_NOTIF_BC_CREATE and SAP_SOL_SERVTRANS_CREATE or SAP_SUPPDESK_CREATE).
    4. Incorrect action profile assigned for the message type SLF1 (correct: SMSD_ABA_MLDG_SERVICEVORGANG or SLFN0001_STANDARD_DNO).
    5. Number ranges are not assigned correctly.
    6. The logical system is not defined.
    7. Modification of the standard settings of the message type SLF1.
    Thanks,
    Venkat

  • Service Desk Solution database Dump with Error

    Hi All,
    When i save any solution for service desk , i am getting below Error.Please help me.
    Error when processing your request
    What has happened?
    The URL http://stc.abc.com:8000/sap/bc/webdynpro/sap/wd_sdk_sdb_create_entry/ was not called due to an error.
    Note
         The following error text was processed in the system SOL : The ABAP/4 Open SQL array insert results in duplicate database records. records in the data base.
         The error occurred on the application server stc_SOL_00 and in the work process 0 .
         The termination type was: RABAX_STATE
         The ABAP call stack was:
    Function: ISMV_POST_SYMP of program SAPLISMV
    Function: ISMV_GENERATE_SYMPTOM of program SAPLISMV
    Form: GENERATE_SYMPTOM of program SAPLISMB
    Form: POST_SYMPTOM of program SAPLISMB
    Form: %_PROCESS_P_O_C of program SAPMSSY0
    Form: %_COMMIT of program SAPMSSY0
    Method: CREATE_SDB_SYM_SOL of program CL_SDK_SDB_NOTIFICATION=======CP
    Method: SAVE_WORK of program /1BCWDY/C9V7XAJL5XS3XH4Z7DS0==CP
    Method: IF_COMPONENTCONTROLLER~SAVE_WORK of program /1BCWDY/C9V7XAJL5XS3XH4Z7DS0==CP
    Method: ONACTIONBTN_SAVE of program /1BCWDY/C9V7XAJL5XS3XH4Z7DS0==CP
    What can I do?
         If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SOL in transaction ST22.
         If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server stc_SOL_00 in transaction SM21.
         If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server stc_SOL_00 . In some situations, you may also need to analyze the trace files of other work processes.
         If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 151 -u: ABCSOL -l: E -s: SOL -i: stc_SOL_00 -w: 0 -d: 20090102 -t: 183025 -v: RABAX_STATE -e: SAPSQL_ARRAY_INSERT_DUPREC
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Regards
    Andrew

    Hi
    check the sap note  1124452 and implement the correction instruction or make a program with Zcode implementation.
    Reagrs,
    Vijay.

  • Because of error 513, after applying BP in service desk

    Dear All,
    i'm now configuring service desk, and have problem "Because of error 513, no message was created in Support Desk System" when creating message from help --> create support message , Gurus please help me..im in trouble right now..
    Regard,
    dinie.

    Hi,
    Please have a look:
    Error 513 while creating support message help menu in Solman system.
    Because of error 513, no message was created in Support Desk System
    Rajeev

  • Getting error on status symbol in service desk

    Dear Expert,
    In my service desk when i m using the T.Code crm_dno_monitor.On clicking on transaction data tab and after that on action tab in status symbol is coming red (incotrrectly processed) and message getting Find support team responsible ,when message created. I m new for service desk.
    Kidly suggest me why its coming...
    Regards
    Ashok

    Dear Antony,
    Thanks for your reply,I m having doubt regarding Service Desk.Our senerio is such a manner that end user will raise a issue from satellite system then message processor is forward this issue to relevant consultant .So when using the T.Code crm_dno_monitor in transaction data tab
    there is Action tab (what is exact function of that tab) in this tab i m finding error.  i  talk to person who did service desk in our company he told taht its related to mail)So i m confused in that as i m getting six red light there as error.
    Three message are coming :-
    1.Find support team responsible when message is created.
    2.Send message to SAP.
    Please suggest me i m get confused.
    Regards
    Adil

  • Errors while setting up service desk 4.0

    Guys,
    Here are the errors we are experiencing with the service desk functionality in Solution Manager.  If you can help resolve these errors it will be very helpful.
    The error when you choose:  Help>>Create Support message is:
    Customizing for feedback functionality missing
    Message no. B~020
    This error occurs in all SAP clients.
    The following error is the one we get when we try to send information to sap through edit support message in transaction monitor.
    Installation number not known in the SAP customer notification system
    Message no. DNO157
    Can you people help me out to resolve these problems

    Hi,
    The error when you choose: Help>>Create Support message is:
    Customizing for feedback functionality missing
    Message no. B~020
    did you create and or configure:
    Logical system names?
    RFC's from satteite to SSM and in SSM a back rfc?
    Numer range configuret ?
    Created and activate a solution in SSM ?
    Configured the BCOS_CUST tabel?
    Installation number not known in the SAP customer notification system
    Message no. DNO157
    Is the sateelite known in SMSY in SSM ?
    Did you do a read system data in SMSY after creating the RFC's?
    Is the Installation number known in SMSY ?
    Did you assign a S-userthe rigths to forward messages in sap in SSM/
    Lots of question but some of these migth solve youre problem ! I know i have seen both message when configuring execpt don't know a this moment what question did solve the problems.
    Lando
    Lando

  • Solman 4.0 Service Desk Error

    We have recently installed Solman SR1, with sp level 8 in windows/oracle10g.
    We have activated the SD as per the logs and in SPRO.
    When we try to create a support message in crmd_order, we receive the below dumps. We have checked in SAP notes but there is no solution.
    Can you please help us on the same.
    Also if you have any documents related to activating service desk for solution manager 4.0, it would be of great help to us.
    Please send the same to [email protected]
    Thanks & Regards
    Senthil
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Except.                CX_SY_REF_IS_INITIAL
    Date and Time          30.05.2007 10:28:04
    Short dump has not been completely stored (too big)
    Short text
         Access via 'NULL' object reference not possible.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "CL_TRIGGER_SELECTOR_PPF=======CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
          caught in
         procedure "SELECT_PROFILES_BY_APPL_REF" "(METHOD)", nor was it propagated by a
          RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         You attempted to use a 'NULL' object reference (points to 'nothing')
         access a component (variable: "LO_TRIGGER").
         An object reference must point to an object (an instance of a class)
         before it can be used to access components.
         Either the reference was never set or it was set to 'NULL' using the
         CLEAR statement.

    > i configured in the child system the rfc connections before and also checked in BCOS_CUST table to make sure that this rfc connection is existing.
    > but still i am not able to see the components in the solman.
    > i do not have access to market place,
    Interesting... so you won't be able to download (and apply) any necessary notes or get the documentation or necessary BC-Sets that are attached to notes...
    > are there any other configurations i need to make in child systems. what transactions do i need to use in child systems to send problem ticket to service desk in solman.
    You either doubleclick on the SAP icon in the upper right corner in the SAPGUI or you use the "help - send support message" menu.
    This is all covered in the documentation.
    Markus

Maybe you are looking for