Service Entry Sheet Notification
Dear Experts,
I am configuring the Release procedures for Service Entry Sheet. Now, I want to configure the workflow for that, just the same way as it is done in PO and PR Release Procedures. Example: SPRO->Materials Management->Purchasing->Purchase Requisition->Release Procedure->Procedure with Classification->Set Up Procedure with Classification->Workflow.
My questioin is this, is there a standard solution for configuring the system to send automatic notifications to the Releaser's SAP Inbox once a Service Entry Sheet is ready to be released, just the same way as it is done in the PR & PO releases?
I appreciate your help.
Check by SWO1 to find if having one business object for SES. If having you can!
Similar Messages
-
MIRO without Service Entry Sheet
Hi,
We have a odd requirement to have the MIRO done before the Service Entry Sheet. The business process is as follows:
1. User will raise a Service PR and then a Service PO will be raised.
2. The services will be carried out at the plant.
3. There will be a central location for Invoices and the vendor might send the invoice before the Service Entry Sheet is created.
4. To manage the huge load, the MIRO will be posted and will be blocked (Since Service Entry Sheet is not created).
5. The Blocked Invoice will trigger a workflow which will be sent to the requestor reminding that a Serv Entry Sheet has to be created.
6. The requestor will then create a Serv Entry Sheet and the Invoice will be cleared.
Std SAP does NOT allow the MIRO without the Serv Entry Sheet.
Any feedback will be appreciated.
AmitHi
you can do this way-
step1-
You can change the Error message into warning which you are getting during invoice posting ( in absence of SE) or
make the changes in std SAP invoice posting code
see at which stage SAP code validate whether Service Entry is exist for given PO.
If SE is not there then instead of allowing to throw an error message, and bypass the error message with warning message.
Step2
you pass the MANUAL BLOCK on invoice via user exist . As soon as you post the invoice, Invoice will have header level block (you can see the invoice in RSEG table RSEG-SPGRQ)
Step3
there should be one function module which will fetch the requisitioner ID from Purchase Order ( ARNAM or AFNAM, based on company policy)
logic- if invoice has manual block , then get the requestor's ID and send a notification via WF to requestor 2) you need to schedule a job which will call T code MRBR with option Manual Block to release the invoices
Process- Once SE is done by requestor and subsequent GR is created automatically, the job will run as per the schedule and invoice will be unblocked
Hope this will help you -
Orderwise, operation wise service entry sheet(Including services ) report
Dear Expert,
Can we get Orderwise, operation wise service entry sheet(Including services ) report. with details like order type,service product, address, customer number(if any) etc.
Regards,
Vishal Thackeri dont think any std report is available with all these data. you may have to configure yourself
you can consider the following tables ESLL ESSR ( for S E )
AUFK, AUFM for order , VIQMEL for notification
MESG, MKPF for goods movement -
Work Flow for Service Entry Sheet
Hi all,
We need Work Flow for Service Entry Sheet as below using SAP mail box :
Once Created, will go to Incharge for varification.
If yes, will go to Manager for further varification.
If yes, will go to again Incharge back for Release.
Regards,
Hamadeh Bashir
Gulf Petrochemical Industries Company,
BahrainHi,
Object Type BUS2080 (Service Notification)
Standard Task TS00008336 (Processing a Service Notification)
Workflow Template WS00200099 (Putting a Service Notification in Process)
You can define your own workflow.
Regards,
Srilatha. -
Error in Posting Service Entry Sheet - FI 311 No Commitment Item in Item 1
Dear All,
We need a suggestion/solution for the following problem :-
Our customer had raised purchase orders for services in may 2010. The following critical entries were made in the purchase order.
Account Assignment Category was P-Project
The WBS element was entered as the Accounts Assigment Category was P.
The user was entering uncoded services. Hence the material group for that service which had G/L a/c tagged to it was entered. But the G/l code was not populated in the purchase order by the system at that time of creation of purchase order and subsequently the user was able to save and release purchase order.
The user was able to post Service Entry Sheet and generate accounting entries in june 2010.
Additional service entry sheets are required to be posted for the remaining quantites. The client has urcated the SES process into two parts.
1. Through T-code ZML81N the end user is able to create and save the SES.
2. Through T-code ML81N the Head of Department is able to approve and post the SES which results in generating of accounting entries.
Presently the user is able to create SES with tcode ZML81N. But when the HOD tries to approve and post the ses we get the error.
FI 311 - No commitement item maintained in Item 0001 in P220 (company code).
Fund Management is active in this company code and all settings related to Funds Management and FI have been checked by respective consultants.
The end user is not having any problems in processing SES for current Pos. But he is not able to create SES for the POs created in May, 2010 for which the user has already created and posted more than one SES against the same POs.
We have already escalated it to SAP.
Thanks in advance
Anil ShanbhagHi,
Use T.code:FS00 and check G/L account 280000 is there in your company code or not.
If yes, check its nature(type/description,control data , cretae bank/intererst tabs)of G/L
NOTE: Also check and compare the field selection between Movement type 101 & your G/L account 280000 in SE38 t.code with Program RM07CUFA
Regards,
Biju -
Prevent auto creation of service entry sheet
Dear friends,
I am using maint plan for creating service entry sheets automatically. I am using framework order where I give the validity period. Now when I try to generate service entry sheets through the plans after the end of validity period given in framework order,the system is allowing creation of service entry sheets. Is it possible to prevent a maint plan triggering a service entry sheet if the call date for the service entry sheet to be generated falls outside the validity period given in framework order.
best regds
ArunArun,
This doesn't suprise me...
I'm not sure if there is a standard solution, but you could do this via user-exit/BADI (see [here|http://www.sapfans.com/forums/viewtopic.php?p=648307] under maintenance plans )
PeteA
[www.pjas.com] -
Purchase order and service entry sheet
Hi
Is there a way to prohibit modifications on the position of services purchase order when the service entry sheet and the invoice were already entered for that position?
Thanks in advance for your help
Tomashi, thanks for your help, but the problem that i have is when the service entry sheet and the invoice are allready entered, the user change the value of the position and the service tab, so the user can enter services for more amounts. So its produce difference on the purchase order history between the values of LERF (WE) and the value of the purchase position. For example
Service Purchase order for 100 dollars.
Tab service: 2 units for 50 dollars
The user enter one service entry sheet for 50 and the invoice for 50 (lerf and WE= 50)
Then the user change the position of the purchase order and increase the value to 100 and modifies the service tab to 1 services for 100.
Then he enter one service for 100 and the corresponding invoice..........so the result is the following:
Service purchase position: 100
LERF-WE: 150
so the purchase order history is inconsistence.
For that reason i whant to know is there is a wat to prohibit modifications on the position of purchase order
Thanks in advnace for your help
Enzo -
VALUE IN PO HISTORY OF SERVICE ENTRY SHEET EXIST EVEN AFTER DELETION OF SES
Respected All,
My client has prepared a down payment request , prepared a service purchase order against that vendor, created service entry sheet.
Later on he came to know that the qty he has entered is wrong ,so he reversed all the goods receipt(done 102 Mvt) , deleted the service entry sheet and now trying to create new SES against the same line through ML81N.
But the Qty column after selection of services is coming blank, i have checked the po history, in that the GR Qty and value is zero and service Qty is zero but service value and down payment column still contains the value, though we have reversed the service entry seet.
please guide me what to do to reflect the qty part in ML81N again.
Thanks and Regards
Abhay Mahodayacan you see the material document with reverse movement ( 102 ) ,corresponding to your cancelation of SE sheet in the P.O history tab?
also check whether the 'actual quantity' in the Service entry extreme right column shows zero.
check in the deleted SE sheet history tab 'change document' button whether the last row change mentioned is setting deletion indicator -
Hi,
We have a scenario wherein we create shipment cost documents against delivery. As a result of shipments fully transferred, a PO for freight vendor is automatically created and a service entry sheet confirmation happens. As a result of service entry sheet confirmation, we have Financial accounting, Controlling and profitability analysis documents created. We have a requirement wherein we need to have the characteristic “sales order number (KAUFN)” populated in the profitability analysis document created as a result of service entry sheet confirmation.
Could someone please advice how could this be attained in COPA. Thanks for your help in advance.
Regards,
SandeepHi Ajay,
Thank you for the quick update.
The document is updated to COPA through OKB9 settings. The profitability segment is updated with fields like customer, product, company code, plant, sales area data, profit center, etc; however the sales order number is missing.
Could you please elaborate further how could FI substitution be implemented to call for the FM COPA_PROFITABILITY_SEGMENT through user exit? Are you recommending the substitution through GGB1? What could be the possible validation to call for the user exit to be implemented?
Regards,
Sandeep Kulkarni -
Changing GR/IR clearing account in Service Entry Sheet process
Hi,
We are using one Gr/ir clearing account for both Material and Service Entry sheet process.
Now for clear process we want to create new account for the Service entry sheet.
We have given blank valuation class for Service entry sheet and it has been assigned to the g/l account.
After analysing the scenario we had two options.1. Whether we can change the valuation class
or 2. we can create new G/l account.
But i had a doubt will it impact anywhere if i change the valuation class.
Can anybody advice me??
Thanks n regards,
VeenaDear Javeed and Sadhashivan,
Thanks for your answers. Yes we have sort key set on both the accounts and also we have tried to display all the PO relevent fields but unable get through.
Please note we need PO no line wise on the ledger of adjustment accounts NOT on the GR/IR account.
1) Goods Delivered but not yet invoiced
2) Goods Invoiced but not yet Delivered
Hope I have made my point clear.
Thanks
Ayaz -
Cancelling Material Receipts generated from approved Service Entry Sheets
Several service entry sheets were entered twice into SAP and approved for Vendor . Upon approval, material receipt documents were created and because the vendor is ERS, invoices were created and paid. Manual credit memos have been processed in AP so the vendor has been charged back but the GR/IR GL account won't clear without the material receipt reversals.
To properly credit the job and debit the GR/IR GL account for this duplication, reversing material receipt documents need to be created. Anybody knows how to do the correction?
please advise.Hi,
Please follow the below steps.
01. First Cancel the Invoice
02. GO ML81N and in change mode you will get rewoke service entry sheet, a pop will come for posting dates enter the posting dates. and save . It will change the reverse the GR document created through Service entry. Set deletion indicator if you want.
Thanks & Regards,
Sridhar -
GR/IR and Service entry sheet
Hello,
Is there any option, where we can define separate G/L a/c for GR/IR clearing a/c for Material receipt and GR/IR clearing a/c for Service entry sheet for services completed?
Thanks in advance
radhakrishnaHello Ashok,
We are having all the material & services masters without valuation class. In this case how do we handle the scenario. In WRX if we define two G/L a/c, how it will validate/identify during the automatic posting that This G/L a/c is for GR/IR materila receipt and another a/c is for Service entry sheet for services completed.
regards,
radhakrishna -
Service entry sheet - Service PO Problem
gurus
I have a service PO which has "N" number of SES entries in PO history as well as same number of GR and also N number of IR entries..
Can somebody tell me how to consolidate against which SES (GR) which IR is posted?
Any table for PO history or any standard T-code to find the IR against a SES (GR),
thanks
SACHINHi Sachin,
You have to follow below 3 Process for your requirement.
1) In Service Order -
> Item Details ---> Invoice Tab -
> Just Check the SERVICE BASED IV ( If you have checked in the Vendor Master, it will automatically Flow)
2) You post the Vendor Invoice in MIRO by choosing the referance Document as SERVICE ENTRY SHEET
3) While posting the invoice in the above process, you enter the Service Entry Sheet number in the referance Field along with the Vendor Inv. No.
If you follow the above process, then easily you can get the datas from EKBE table.
With Regards
Srinivasan Baskaran -
How to cancell PO from Service Entry sheet
Hi,
We have many open service Purchase orders in the system(More than 1800) and we would like to cancell these PO's as business dont need the service.
Scenario:
We have raised PR, which is approved by multi level approvals
After PR is approved, PO is created again approved by multi level approvals
Now 1% of the above PO's required to be cancelled which is almost aroung 1800 in number.
Pls note that we have Funds management active, so budget has consumed in the system during PR/PO process.
Now if we cancel PO's then even PR's also to be cancelled which is very lengthy process, Is there any other way to do this.
Can we do anything from service entry sheet?
Regards,
SunilHi Sameer
I don't think you can close the PO from ML81N without posting some form of service receipt.
Do you have any experiences with the mass maintenance transactions?
After reading some of the discussions below I would suggest you use the MEMASSPO transaction to set the deletion indicator on each PO item (EKPO-LOEKZ) to "L". Running transaction MASS for business object will get you to the same functionallity.
There is also a MEMASSRQ transaction (or MASS for business object BUS2105) which you can use to quickly set the closed indicator for the corresponding requisition lines.
This doc http://scn.sap.com/docs/DOC-25758 written by Parag Parikh should help if you don't have any experience.
Regards
Robyn -
Error while creating service entry sheet
Hi Experts,
I am trying to create service entry sheets using bapi 'BAPI_ENTRYSHEET_CREATE' for a purchase order with multiple line items. The bapi creates SES for the first line item but gives error 'User xxxxxx already processing purchase order nnnnnnnnnn' for the rest of all. Tried using 'COMMIT AND WAIT' after bapi call but it's not working.
Kindly help me out with the solution.
Regards,
B.SiddheshHi Siddhesh,
Please use below code before calling the 'BAPI_ENTRYSHEET_CREATE' to unlock the PO.
Hope this is helpful.
**Delete the Lock objects EKKO Header PO.
CALL FUNCTION 'ENQUEUE_READ'
EXPORTING
GNAME = 'EKKO'
GARG = ''
GUNAME = SY-UNAME
TABLES
ENQ = ENQ
EXCEPTIONS
OTHERS = 0.
IF NOT ENQ IS INITIAL.
DESCRIBE TABLE ENQ LINES SY-TFILL.
CHECK SY-TFILL > 0.
CALL FUNCTION 'ENQUE_DELETE'
EXPORTING
SUPPRESS_SYSLOG_ENTRY = 'X'
IMPORTING
SUBRC = RC
TABLES
ENQ = ENQ.
ENDIF.
**Delete the Lock objects EKPO Header PO.
CALL FUNCTION 'ENQUEUE_READ'
EXPORTING
GNAME = 'EKPO'
GARG = ''
GUNAME = SY-UNAME
TABLES
ENQ = ENQ
EXCEPTIONS
OTHERS = 0.
IF NOT ENQ IS INITIAL.
DESCRIBE TABLE ENQ LINES SY-TFILL.
CHECK SY-TFILL > 0.
CALL FUNCTION 'ENQUE_DELETE'
EXPORTING
SUPPRESS_SYSLOG_ENTRY = 'X'
IMPORTING
SUBRC = RC
TABLES
ENQ = ENQ.
ENDIF.
Reward if helpful.
Regards,
Shakeel Ahmed
Maybe you are looking for
-
Regarding interface tables in CATS
Hi Experts, Can any body briefly explain about the interface tables in cats for integration of cats of HR,PS and FICO modules and highlight on the technical intricacies in this data transfer between cats and target modules like HE,PS and FICO. Points
-
I have just received my iphone 5 & cannot get my contacts, photos & music transferred over. My old Iphone does not have the cloud. Surely I don't have to input all my numbers manually???? Also, why would I not have any service with my new nano sim? A
-
Parent node showing in schema when child nodes not present
I had several folks answer my questions on mapping from a flat file to an EDI 835 schema and I am down to just a couple of issues before I finish up. I have a conditional mapping issue that I have to solve before I can map the rest of the document. I
-
Show clickable icon in list instead of URL
Hi there, I have a SharePoint Online list containing a hyperlink field. When users view the list, they see the full text URL for the hyperlink. I'd like to replace that hyperlink with a small icon, so that users do not see the URL, but can click on t
-
DVI Resolution on MV220 22" LCD
I recently purchased a Megavision MV220 22" Widescreen LCD monitor, and find that I can get the full 1680x1050 resolution when using the DVI-VGA adapter, but can only get up to 1280x1024 when using a DVI-D Dual Link cable. I'll be very disappointed i