Service should not restart on process exit

Hi
Does anyone know what properties i should set in order for a service to behave in this fashion:
If my application terminates (i.e all processes spawned by the start method exits or are killed) the state should go to offline, and SMF should NOT try to restart it?
I have tried to add the following to the manifests
<propval name='duration' type='astring' value='transient' />to <property_group name='startd' >This results in the fact that the services is not restartet, but it remains in an online state.
Hope you can help!
/Lars

Offline isn't a stable state--the service instance that's in the offline state is trying to transition to online. You could exit with one of the error exit status values given in the smf_method(5) manual page, which will cause the service to go into maintenance.
Service state is relevant to administrators as a health indicator, or to trigger changes in dependent service instances. What do you want the offline state of your instance to signify?

Similar Messages

Without standard release confirmation should not allow in process order

Our clients need is that without standard release confirmation should not allow in process order.
We are using CORK,cor6 and MB31 My need is to apply user exit in all cases.
I got input from sdn User exit:-PPCO0006 Function module Exit_SAPLCOZF_003
INCLUDE ZXCO1U06
I need to activate this only during confirmation.ie confirmation to be avoided if cost is not released.
Regards,
Pert

Hi,
You are right. For preventing confirmation in case std cost estimate release is not available you need to do enhancement. You can check for following exit along with exit which you mentioned in your post :
Enhancement CONFPI05
EXIT_SAPLCORF_405 - Process Ord. Conf.: Cust.-Specific Enhancements when Saving
INCLUDE ZXCOFU10
Check either of the enhancements which may fulfill your business requirement.
Regards,
Tejas

Stopping Analytic Intergration Services service does not stop all processes

Hello Experts
Starting the 'Analytic Integration Services' service starts 2 instances of olapisvr.exe. However, stopping the 'Analytic Integration Services' service only stops one instance of olapisvr.exe. This was detected upon starting the AIS Service, i.e. no one had logged into the AIS/EIS Console--- there were no connections to AIS/EIS. The second instance of olapisvr.exe must be manually ended for the Services to be successfully recycled.
Environment:
Hyperion : EPMA 11.1.1
EIS Version : 9.3.1.3
OS : Microsoft Windows Server 2003 R2 (32-bit)
Database : Oracle Server - Enterprise Edition Version: 10.2.05
Research:
Known Issue in EPM Version 11
Start and Stop Controls for Windows Service on Win2003 SP1
On Win2003 SP1, after installing Integration Services, the EPM System Installer uses Windows services to start and stop the services for Integration Services. Sometimes after stopping the service using Windows Services console, the Integration Server process, olapisvr.exe, continues to run.
WORKAROUND: Manually stop the “olapisvr.exe” and “olapisvc.exe” processes by using the Windows Task Manager.
BUG # 7253757 (Not published externally)
Is it bug for customer's environment. Please suggest
Thank You

Suggesting this kind of makes me feel dirty, but, if you just absolutely have to work around it for now, could you create a small batch file or something similar that runs a NET STOP command to kill one of the AIS services? You can run NET HELP STOP on the command line to see what the options are.
Jason
[jasons hyperioni blog|http://www.jasonwjones.com]

Service account not inheriting AD group membership permissions on SQL Server

I am adding Active Directory groups as logins and database users to our SQL Servers. A service account added to an AD group did not inherit the group permissions that the user accounts did. Can there be different attributes of service accounts that would
prevent service accounts from inheriting the permissions of AD groups?
Example: An AD Group AD_group contains a service account user, svc_account and a user account, user_account. AD_group is added to a SQL Server as a login. User_account can log in to SQL Server but svc_account cannot.

SQL Server will use the information within the token used for authentication, so it may be possible that the service has a stale token (i.e. the token has not been refreshed or the service has not restarted) since you made the changes to the AD group.
I would recommend using a tool such as ProcessExplorer (https://technet.microsoft.com/en-us/sysinternals/bb896653) to make sure the token for the process is showing the latest group
memberships properly.
I hope this helps,
-Raul Garcia
SQL Server Security
This posting is provided "AS IS" with no warranties, and confers no rights.

"The TestStand service did not start up promptly"

I have a LabView Operator Interface startup problem with TS 4.1. If
the OI is started immediately after system boot the operator may get apopup error from TestStand:
"The TestStand service did not start up promptly"
The
TestStand Service has a dependency on RPC so if either does not startup
before the operator launches the OI, he gets the message. If he
dismisses the message there is no further error i.e. the software
continues to work OK.
The real problem is the end user does not like this message and wants it removed.
Any suggestions how I can get rid of this message?
Only ideas I can see at the moment - either to have some kind of
delay timer on startup (this would need to be around 1-2 mins after
boot
on the system in question to stop it happening) or perhaps some LabView
code to poll the status of the TestStand service somehow so that we
wait for service to start before the OI communicates with testStand -
and thus the
popup does not occur.

The service should not normally take any significant amount of time to startup. There are some issues with service startup that we have noticed in some cases, but I don't remember the details. I will try and find out and get back to you. In the meantime, or as a possible solution, you can use the Windows SDK to check the status of the service and to wait until it is running. I'm not sure if the following can be directly translated into LabVIEW dll calls, but it would definitely be possible to create a C/C++ dll with the following code in it and call it from LabVIEW (If you do not have access to a C/C++ compiler and/or would like me to, I can probably build a dll with this code in it for you):
int MakeSureServiceIsRunning(void)
    SERVICE_STATUS serviceStatus;
    SC_HANDLE hService = NULL;
    SC_HANDLE hSCM = NULL;
    // Put variable into a good initial state for return value.
    serviceStatus.dwCurrentState = SERVICE_START_PENDING;
    hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
    if (hSCM == NULL)
        goto Error;
    hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
    if (hService == NULL)
        goto Error;
    do
        if(!QueryServiceStatus(hService, &serviceStatus))
            goto Error;
        if(serviceStatus.dwCurrentState != SERVICE_RUNNING)
            Sleep(100); // don't just do busy waiting, give up cpu time to other threads.
    while(serviceStatus.dwCurrentState == SERVICE_START_PENDING);
Error:
    if (hService != NULL)
        CloseServiceHandle(hService);
    if (hSCM != NULL)
        CloseServiceHandle(hSCM);
    if (serviceStatus.dwCurrentState == SERVICE_RUNNING)
        return 1;
    else
        return 0; // An error occurred, or service is in an unexpected state.
Or alternatively, if you want to do the polling inside of LabVIEW you could just do the following in the C/C++ dll:
int GetTestStandServiceStatus(unsigned int *serviceStatusReturnResult)
    SERVICE_STATUS serviceStatus;
    SC_HANDLE hService = NULL;
    SC_HANDLE hSCM = NULL;
    hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
    if (hSCM == NULL)
        goto Error;
    hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
    if (hService == NULL)
        goto Error;
    if(!QueryServiceStatus(hService, &serviceStatus))
        goto Error;
    *serviceStatusReturnResult = serviceStatus.dwCurrentState;
    CloseServiceHandle(hService);
    CloseServiceHandle(hSCM);
    return 1; // success
Error:
    if (hService != NULL)
        CloseServiceHandle(hService);
    if (hSCM != NULL)
        CloseServiceHandle(hSCM);
    return 0; // An error occurred. Perhaps TestStand service isn't registered.

BOM component should not appear in order confirmation

Hi
In a scenario, I want one of the BOM component should not appear in process order confirmation.
I have not assigned this component to any phase and in material master MRP2 view the backflush tick is not activated.
Still the component is appearing during order confirmation.
Can anyone help in this matter?
Thanks
Pradipta Sahoo

You need to check only at two places to find out the reason
1. In production order (CO02/CO03) in components overview see if backflush indicator is checked.
if it is check you need to look for where it is coming from
a) Material master <<< you already checked
b) Work Center <<< you might have checked this also
c) Components allocation of BOM items to routing operations
2. In OPK4 make sure "All components" is unchecked.
You may have to also note that the production order was created before the backflushing was removed from the above settings.

Credit block should not prevent service order creation

An upgrade from 4.7 to ECC6, without any changes made to the configuration or program change, has lead to the following issue. ECC6 is not creating a service order connected to a sales order, when the customer has exceeded the credit limit. The sales order of custom order type is getting saved with a warning message that credit limit has exceeded. However, earlier in 4.7, the message would not stop creating subsequent service order. What could be different, that prevent ECC6 environment to hold on to service order creation? A subsequent release of the credit block through VKM1 however triggers the service order being created.

Are you using credit card processing in SAP to get the authorization?
If you are then the authorization should not block the order.
Or are you using credit card as a form of payment (without authorization) in which case this needs to be put on the customers account as a payment and then the order entered.
Where are you holding the credit card details?

Certificate issues Active Directory Certificate Services could not process request 3699 due to an error: The revocation function was unable to check revocation because the revocation server was offline. 0x80092013

Hi,
We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was unable to
check revocation because the revocation server was offline. 0x80092013 (-2146885613). The request was for CN=xxxxx.ourdomain.com. Additional information: Error Verifying Request Signature or Signing Certificate
A couple of months ago we decomissioned one of our old 2003 DCs and it looks like this server might have had something to do with the CA structure but I am not sure whether this was in use or not since I could find the role but I wasn't able to see any existing
configuration.
Let's say that this server was previously responsible for the certificates and was the server that should have revoked the old certs, what can I do know to try and correct the problem?
Thank you for your help
//Cris

hello,
let me recap first:
you see these errors on a ROOT CA. so it seems like the ROOT CA is also operating as an ISSUING CA. Some clients try to issue a new certificate from the ROOT CA and this fails with your error mentioned.
do you say that you had a PREVIOUS CA which you decomissioned, and you now have a brand NEW CA, that was built as a clean install? When you decommissioned the PREVIOUS CA, that was your design decision to don't bother with the current certificates that it
issued and which are still valid, right?
The error says, that the REQUEST signature cannot be validated. REQUESTs are signed either by itself (self-signed) or if they are renewal requests, they would be signed with the previous certificate which the client tries to renew. The self-signed REQUESTs
do not contain CRL paths at all.
So this implies to me as these requests that are failing are renewal requests. Renewal requests would contain CRL paths of the previous certificates that are nearing their expiration.
As there are many such REQUEST and failures, it probably means that the clients use AUTOENROLLMENT, which tries to renew their current, but shortly expiring, certificates during (by default) their last 6 weeks of lifetime.
As you decommissioned your PREVIOUS CA, it does not issue CRL anymore and the current certificates cannot be checked for validity.
Thus, if the renewal tries to renew them by using the NEW CA, your NEW CA cannot validate CRL of the PREVIOUS CA and will not issue new certificates.
But it would not issue new certificates anyway even if it was able to verify the PREVIOUS CA's CRL, as it seems your NEW CA is completely brand new, without being restored from the PREVIOUS CA's database. Right?
So simply don't bother :-) As long as it was your design to decommission the PREVIOUS CA without bothering with its already issued certificates.
The current certificates which autoenrollment tries to renew cannot be checked for validity. They will also slowly expire over the next 6 weeks or so. After that, autoenrollment will ask your NEW CA to issue a brand new certificate without trying to renew.
Just a clean self-signed REQUEST.
That will succeed.
You can also verify this by trying to issue a certificate on an affected machine manually from Certificates MMC.
ondrej.

The server farm account should not be used for other services

I have created a new SharePoint Foundation 2013 Farm. I only used the Farm Configuration Wizard to create the Search Service Application, all other aspects of the Farm was created using PowerShell.
The SharePoint Health Analyzer is reporting the following error:
Title: The server farm account should not be used for other services.
Severity: 1 - Error
Category: Security
Explanation: DOMAIN\FARM_ACCOUNT, the account used for the SharePoint timer service and the central administration site, is highly privileged and should not be used for any other services on any machines in the server farm. The following services were
found to use this account: Distributed Cache Service(Windows Service)
Remedy: Browse to
http://centraladminsite:port/_admin/FarmCredentialManagement.aspx and change the account used for the services listed in the explanation. For more information about this rule, see "http://go.microsoft.com/fwlink/?LinkID=142685".
Now I understand how to change the account used to run the Distributed Cache Service, but my query is what account should I use in the least privelage model? I have setup the following 6 accounts as per TechNet guidelines (Link)
and am not sure if one of these accounts should be used or if another account is required:
SQL Server service account
Setup user account
Server farm account
SharePoint Server Search service account
Default content access account
Application pool identity
After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity
Service, a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services
within the Farm?
Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
Kevin Evans

After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity Service,
a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services within the Farm?
Inder: Yes, It is suggested to have multiple service account for each service application. This increases security and dependencyof 1 account on multiple Service applications. Like below
SQL Server service
Local System account (default)
Setup user
Member of the Administrators group on the local computer
Server farm
Network Service (default)
No manual configuration is necessary.
SharePoint Server Search Service
By default, this account runs as the Local System account.
If you want to crawl remote content by changing the default content access account or by using crawl rules, change this to a domain user account. If you do not change this account to a domain user account, you cannot change the default content access account
to a domain user account or add crawl rules to crawl this content. This restriction is designed to prevent elevation of privilege for any other process running as the Local System account.
Default Content Access
No manual configuration is necessary if this account is only crawling local farm content. If you want to crawl remote content by using crawl rules, change this to a domain user account, and apply the requirements listed for a server farm.
Content Access
Same requirement as the default content access account.
Profile import Default Access
Same requirements as server farm.
Excel Services Unattended Service
Must be a domain user account.
http://technet.microsoft.com/en-us/library/cc263445%28v=office.15%29.aspx
Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
Inder: Each service account has a application pool and you can plan to use same application pool for multiple
service accounts if required. These application pool are then consumed by proxy connection
of each service application. On service application pool, you can see all the service applications and its proxy connection.
If this helped you resolve your issue, please mark it Answered

Exit button - Germany Personal data service does not work

Hi all,
We just upgraded our portal to EP7 Sp22 with 1.3 ESS Business Package and 603 XSS components in the back-end.
In testing Germany and all countries that use the Germany personal data service, the Exit button on all screens (Overview, Edit, Review and Save, Confirmation) does not work. The Exit button, when selected, keeps the user on the same screen.
I am not sure where the button is configured, but it should always take us back to the page from where the service was launched. So if I accessed through the Overview page or Personal Information page, and then click on the exit button, I should be taken back to one of those pages.
Where can we configure the exit button for the German Personal data service, so that it works and takes the user back to the page where they started.....?
Cheers!, Neeta

Hi,
The Germany personal data service is the only one where the exit button is not working. All other countries are testing fine.
Is it a customization issue on the back-end? The resource in spro for germany is configured with the pcd link of the german personal data i-view.
The other countries are also customized in the back-end with the pcd link of the appropriate i-view.
Regards, Neeta

Service item should not post to stock

Dear Experts,
I have the following scenario.
I have a service material (DIEN). And created a PO with Account assignment M with SO. I have done the GR, accounting entries are posted as:
+ KBS --> CoGS
- WRX --> GR/IR Clearing
Account entries are correct. But when I check in MB52, stock is there as a special stock with E/SO number. But in my case, it should not post to stock.
How to achieve this? Kindly explain please.
Regards,
Sham.

Hello Biju,
I am using the AAC as "C" now. It is working fine.
I have an issue here. I will explain my scenrio. It is actually a trading process.
we trade machines as well as the service (Implementation of the machine).
1. Create Sales Order with Material and Service and it internally creates PR with 2 item to vendor X as follows.
   M MAT 1 EA
   C SRV 1 EA
2. When we recive the material MAT, we do the GR, it goes to inventory.
3. For the implementation of machine in the customer premise, we go with the vendor X and implement the machine.
4. At this point, we do GR for service and accounting entry created in COGS for the service
   + KBS --> CoGS
   - WRX --> GR/IR Clearing
5. Vendor X raise the invoce and we pay the vendor
6. But the problem is, we invoice the customer after a month or two based on our terms with the customer. so until we bill the customer, the service cost is lying as cost in COGS expense account.
Is there any way to clear it from expense account to some receivable account? And the receivable account should be nullified when we actually bill the customer.
Kindly let me know, if I am not clear enough.
regards,
Sham.

Everytime i connect my ipod to the computer, itunes says that this ipod cannot be used because the apple mobile device service is not started, what should i do?

Everytime i connect my ipod to the computer, itunes says that this ipod cannot be used because the apple mobile device service is not started, what should i do?

See this article for how to restart this service.
http://support.apple.com/kb/TS1567
B-rock

Windows cannot connect to the printer the local print spooler service is not running please restart the spooler or restart the m

We have 7 computers on a local network 3 of them have local printers 2 and are brand new Vista equiped. we shared the local printers on the vista machines but they are unaccessable from one vista to the other... it works from an XP to a Vista, but not from a Vista to a Vista.... go figure.... When we try to add the printers, the error message that we get is: "windows cannot connect to the printer. the local print spooler service is not running. please restart the spooler or restart the machine."
I would appreciate any help...
Thank you

This worked for me. GP
Problem : error 1075 and Local print spooler service is not running.
problem description : I have a Lexmark x4270 all in one. I installed the driver for it in my new laptop running Vista. Turns out the driver is not for Vista but XP. I uninstalled the XP driver and downloaded a Vista driver from Lexmark. When I try to run the printer software I get a message "Local print spooler service is not running. Please restart the spooler or restart the machine." I tried all of that. I have looked this problem up on the web and it is quite common with Vista. Many of the "solutions" say it is a problem with an incomplete removal of the incorrect printer driver and they show how to correct in the registry. I am not comfortable tinkering with the registry and thought I'd consult with you first.
I tried "everything" I could to fix the problem of getting "error 1075" fixed in my HP laptop running Vista. HP came up with simple solution below. The regedit part is what fixed mine. I did not need the safe mode part. I think Lexmark should add the solution to your knowledge base.
==============================
From HP: Please perform the below given steps in safe mode to resolve the issue.
Reboot your notebook and press F8. The system will show some booting options select safe mode.
Note: Starting computer in safe mode may take some time.
Uninstall the printer using Programs and Features from the control panel of your notebook.
Uninstalling any software from Control Panel :
1. Click on Vista (start) button
2. Click on control panel
3. Double click on Programs and Features
4. Click on YOUR Lexmark Printer and click on remove.
Download and reinstall the printer software using the below given link :
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0&searchLang=en&os_group=Windows%20Vista&target=
NOTE: Clicking the link may give an error indicating it is invalid.
Copy and paste the entire link in a new browser window.
After the installation of drivers, restart the notebook into normal mode. Now plese check with printing any document. If the still persists then perform the below given steps :
Click on Vista (Start) button, and type Regedit.exe in search bar
Navigate to the following branch
HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
In the right-pane, double-click the DependOnService value
Delete the existing data, and then type RPCSS
Close Regedit.exe
Restart the computer.
This should resolve the issue.
For information on keeping your HP and Compaq products up and running, please visit our Web site at:
http://www.hp.com/go/totalcare

"Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer." Any Help?

Basically, i've tried a number of fixes and so far none have actually solved the problem.
I am running Windows 7 Premium. 6GB RAM. 64-bit Operating System. Intel(R) Core(TM) i5-2410M CPU @ 2.30 GHz.
any help?

2014-05-17   00:36:48:125   3880   3d0   COMAPI   FATAL: Unable to connect to the service (hr=80070424)
2014-05-17   00:36:48:125   3880   3d0   COMAPI   WARNING: Unable to establish connection to the service. (hr=80070424)
2014-05-17   00:36:48:125   3880   3d0   COMAPI      - WARNING: Exit code = 0x80070424
2014-05-17   00:36:48:125   3880   3d0   COMAPI   ---------
2014-05-17   00:36:48:125   3880   3d0   COMAPI   -- END -- COMAPI: Search [ClientId = <NULL>]
2014-05-17   00:36:48:125   3880   3d0   COMAPI   -------------
2014-05-17   00:36:48:125   3880   3d0   COMAPI   FATAL: Unable to perform synchronous search. (hr=80070424)
2014-05-17   02:19:57:760   4220   1080   Misc   =========== Logging initialized (build: 7.3.7600.16385, tz: -0400) ===========
2014-05-17   02:19:57:760   4220   1080   Misc      = Process: c:\Program Files (x86)\Microsoft Silverlight\5.1.20125.0\Silverlight.Configuration.exe
2014-05-17   02:19:57:761   4220   1080   Misc      = Module: C:\Windows\SysWOW64\wuapi.dll
2014-05-17   02:19:57:760   4220   1080   COMAPI   FATAL: Unable to connect to the service (hr=80070424)
2014-05-17   02:19:57:761   4220   1080   COMAPI   WARNING: Unable to establish connection to the service. (hr=80070424)
2014-05-17   02:19:57:764   4220   1080   COMAPI   FATAL: Unable to connect to the service (hr=80070424)
2014-05-17   02:19:57:764   4220   1080   COMAPI   WARNING: Unable to establish connection to the service. (hr=80070424)
2014-05-28   01:54:11:592   11024   37e4   Misc   =========== Logging initialized (build: 7.3.7600.16385, tz: -0400) ===========
2014-05-28   01:54:11:607   11024   37e4   Misc      = Process: c:\Program Files (x86)\Microsoft Silverlight\5.1.20125.0\Silverlight.Configuration.exe
2014-05-28   01:54:11:607   11024   37e4   Misc      = Module: C:\Windows\SysWOW64\wuapi.dll
2014-05-28   01:54:11:591   11024   37e4   COMAPI   FATAL: Unable to connect to the service (hr=80070424)
2014-05-28   01:54:11:607   11024   37e4   COMAPI   WARNING: Unable to establish connection to the service. (hr=80070424)
2014-05-28   01:54:11:612   11024   37e4   COMAPI   FATAL: Unable to connect to the service (hr=80070424)
2014-05-28   01:54:11:612   11024   37e4   COMAPI   WARNING: Unable to establish connection to the service. (hr=80070424)
2014-05-30   10:55:09:405   3988   1964   Misc   =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-30   10:55:09:435   3988   1964   Misc      = Process: C:\windows\system32\wusa.exe
2014-05-30   10:55:09:435   3988   1964   Misc      = Module: C:\Windows\system32\wuapi.dll
2014-05-30   10:55:09:405   3988   1964   COMAPI   ----------- COMAPI: IUpdateServiceManager::AddScanPackageService -----------
2014-05-30   10:55:09:435   3988   1964   COMAPI      - ServiceName = Windows Update Standalone Installer
2014-05-30   10:55:09:435   3988   1964   COMAPI      - ScanFileLocation = C:\cc6856b2c1dde6abb126538628\wsusscan.cab
2014-05-30   10:55:09:435   3988   1964   COMAPI   FATAL: Unable to connect to the service (hr=80070424)
2014-05-30   10:55:09:435   3988   1964   COMAPI   WARNING: Unable to establish connection to the service. (hr=80070424)
2014-05-30   10:55:09:435   3988   1964   COMAPI      - Exit code = 0x80070424
2014-05-30   10:57:10:086   3844   1744   Misc   =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-30   10:57:10:086   3844   1744   Misc      = Process: C:\windows\Explorer.EXE
2014-05-30   10:57:10:086   3844   1744   Misc      = Module: C:\windows\system32\wucltux.dll
2014-05-30   10:57:10:086   3844   1744   WUApp   FATAL: Failed to cocreate AU object, hr=0X80070424
2014-05-30   10:57:10:086   3844   1744   WUApp   FATAL: Failed to initialize WU app, hr=80070424
2014-05-30   10:57:10:087   3844   1744   WUApp   WARNING: Cannot load updates because AU service is not available, hr=80010108
2014-05-30   10:57:10:087   3844   1744   WUApp   WARNING: Failed to load the update list, error 80010108
2014-05-30   10:57:10:087   3844   1744   WUApp   WARNING: Failed to populate update list with error 80010108
2014-05-30   10:57:10:128   3844   1744   WUApp   WARNING: Error displaying Opted In Service summary: 80070424
2014-05-30   10:57:13:756   3844   1744   WUApp   WARNING: Couldn't handle 'Check for Updates' click -- service not running
2014-05-30   10:57:28:620   3844   1744   WUApp   WARNING: Couldn't handle 'Check for Updates' click -- service not running
2014-05-30   11:21:21:738   3844   1744   WUApp   WARNING: Couldn't handle 'Check for Updates' click -- service not running
2014-05-30   11:21:34:106   3844   1744   WUApp   WARNING: Couldn't handle 'Check for Updates' click -- service not running
2014-05-30   11:21:39:978   6252   1784   Misc   =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-30   11:21:39:978   6252   1784   Misc      = Process: C:\windows\system32\wuauclt.exe
2014-05-30   11:21:39:978   6252   1784   Misc      = Module: C:\windows\system32\wucltux.dll
2014-05-30   11:21:39:977   6252   1784   CltUI   FATAL: Dialog thread failed for directive Featured Opt-In with error 80070424
2014-05-30   11:21:42:714   3360   19bc   Misc   =========== Logging initialized (build: 7.6.7600.256, tz: -0400) ===========
2014-05-30   11:21:42:714   3360   19bc   Misc      = Process: C:\windows\system32\wuauclt.exe
2014-05-30   11:21:42:714   3360   19bc   Misc      = Module: C:\windows\system32\wucltux.dll
2014-05-30   11:21:42:713   3360   19bc   CltUI   FATAL: Dialog thread failed for directive Featured Opt-In with error 80070424
2014-05-30   11:33:25:762   3844   1744   WUApp   WARNING: Couldn't handle 'Check for Updates' click -- service not running

I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

I am running Itunes in Windows 7. Every time I exit, it restarts in a few seconds. If I restart my compter and forec close it, it does not restart, but If I use it at all the whole loop starts again.

Sorry, just to confirm, I DID NOT ACTUALLY ANSWER MY OWN QUESTION!
I replied to the previous message from my iphone and I managed to hit the link to "This has answered my question" by accident!
I AM STILL LOOKING FOR A RESOLUTION TO MY ORIGINAL PROBLEM. CAN SOMEONE ALSO NIW TELL ME HOW TO GET RID OF THE GREEN TEXT TGAT SAYS TGAT MY QUESTION IS ANSWERED? That is a pain! It should at least ask you to confirm that your question is actually answered and you didn't hit it by mistake, like I did!

Service should not restart on process exit

Similar Messages

Maybe you are looking for