Set rlim_fd_cur=8192 for Solaris 10 Zone?
Hi!
I would like to install SAP Solution Manager 7.0 on Solaris 10 Zone (Sparc 64 Bit).
Unfortunately I could find the file etc/system. Instead I added the project file acording to SAP note 724713.
When I run SAP prerequisite Checker SAPINST tells me that the following will be missed:
set rlim_fd_cur=8192 in etc/system.
Question:
Do I need to add the file etc/system and add them the following commando:
set rlim_fd_cur=8192?
Or does this commando not apply for Solaris 10?
Thank you very much!
regards
Thom
> In solaris 9 and below, it was needed to add the parameter in /etc/system. With solaris 10 no need.
This is not completely true.
The number of maximum open files must be set in the global zone, otherwise you will run into problems once the total number of processes in all zones will be > 1024 - hence you need to also set this in Solaris 10.
A zone has no /etc/system thus that error can be ignored.
Markus
Similar Messages
-
Req: Checkpointing Disks for Solaris Zones
Is there a way using Solaris Zones to checkpoint a disk? I would like to be able to carry out a series of experiments on a test system and start from an identical configuration each time. VMWare calls this capability "Disk checkpointing," and Solaris Zones appears to somewhat resemble VMWare.
Hi,
since the SCOM Agent is not 'cluster aware' you probably have no other choice than restarting the agent and wait for the next discovery cycle of the solaris logical disks. You can speed this up by manually override the discovery interval for that specific
server. After that the disk is not longer monitored.
If you have the time and knowledge you could set up a custom monitoring for clustered filesystems and disable the standard monitoring for that filesystems. But I think thats quite time-consuming. We have the same issues here with our Solaris and Linux clustered/shared
filesystems but we still live with the workaround of restarting the agent.
Regards -
Recommendations for Solaris Zones for NW2004S?
I'm new to Solaris zones and would appreciate any recommendations from you regarding the setup of zones to run NW2004S. I did a scan of SapNet and SDN, but found nothing.
So, for example, would you insist on running a Prod instance in the global zone? For an SAP that runs in a zone, which file-systems would you share from the global zone?
Another tips/traps you have would be greatly appreciated.We consolidated already 7 systems:
root@consbig / >zoneadm list -vi
ID NAME STATUS PATH
0 global running /
22 srmtest running /zone/srmtest
23 nwdi_ext_1 running /zone/nwdi_ext_1
32 bbbcpy running /zone/bbbcpy
35 icht running /zone/icht
40 osiris running /zone/osiris
42 bi_oracle_test running /zone/biorat
43 hpvm running /zone/hpvm
This is a HP DL585 with 4 CPUs and 48 GB RAM (Opteron, not SPARC). -
Set expiration dates for Secure Zone Memberships
We run an online exercise company offering memberships with access to exercise videos so users can exercise online - we sell memberships by the week, month, or month to month memberships. We also sell a beginner courses. The site has been built in Adobe Muse, integrated with Business Catalyst.
For the time-based memberships we have inserted a snippet of code in Business Catalyst that limits the amount of time members have access to the secure zone where we keep the videos - this is tied to the form members fill out when they purchase. The issue is that when the entire Muse site is republished or just the page with the form - the code disappears. So we have to go into each form and reinsert the code. This has been going on for quite some time. Below is most of the code we've been using - which we found in Business Catalyst Forum Section a couple years ago:
function setExpiryDate( )
var dat=new Date();
dat.setDate(dat.getDate() + 8);
var monthname=new Array("Jan","Feb","Mar","Apr","May","Jun", "Jul","Aug","Sep","Oct","Nov","Dec")
var pretty = dat.getDate() + "-" + monthname[dat.getMonth()] + "-" + dat.getFullYear();
document.getElementById("ExpiryDate").value = pretty;
};setExpiryDate( );
We are looking to 'permanently' anchor the code in the form.Hi
If you are using BC secure zones then you can setup the expiry date from BC end only, regarding the code that you are using , I believe you are trying to use specific form for secure zone sign up and limiting the expiry date.
Regarding form code being stripped off, are you submitting the form once from site front end and then also code is stripped off ?
Please include site url in your response.
Thanks,
Sanjit -
Admin interface for solaris zones
Is there any admin interface available for zones . Like may be web based ?
Mike-Kirk wrote:
Hi Arronfree,
arronfree wrote:
What about xVM Ops center? It looks like it has VM admin but I have not actually seen the program and I have not actually seen a price.
Implicate_Order is right, [Solaris Container Manager|http://www.sun.com/software/products/container_mgr/index.xml] (part of [Sun Management Center|http://www.sun.com/software/products/sunmanagementcenter/index.xml]) provides that single web page to manage (create/destroy/boot/halt/migrate/copy/resource-cap) zones. xVM Ops Center is a fantastic tool for patching and provisioning system amongst other things, but doesn't have all SCMs zone features, yet.
Don't post advertisements. You account will get blocked if you continue with it! I'm blocking your original post.
Kaj -
Solaris 10 Zone for Solaris 11.1 creation with template fails.
Hi,
We are trying to use the Oracle VM Template for Oracle Solaris 10 Zone to create a solaris 10 zone on a solaris 11.1 GZ
root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -v
This is an Oracle VM Template for Oracle Solaris Zones.
Copyright © 2011, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly
permitted in your license agreement or allowed by law, you may not
use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish, or display any
part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by
law for interoperability, is prohibited.
Version: 1.0.9.12
root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -p /rpool -a 10.83.128.35/24 -i net6 -z testzone
This is an Oracle VM Template for Oracle Solaris Zones.
Copyright © 2011, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license
agreement containing restrictions on use and disclosure and are
protected by intellectual property laws. Except as expressly
permitted in your license agreement or allowed by law, you may not
use, copy, reproduce, translate, broadcast, modify, license,
transmit, distribute, exhibit, perform, publish, or display any
part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by
law for interoperability, is prohibited.
IMAGE: ./solaris-10u11-sparc
ZONE: testzone
ZONEPATH: /rpool/testzone
VNIC: vnicZBI83273795
IP ADDR: 10.83.128.35
NETMASK: 255.255.255.0
DEFROUTER: 10.83.128.1
TIMEZONE: Europe/Copenhagen
Checking disk-space for extraction
Ok
Extracting in /opt/scripts/bootimage.8Ham6r ...
100% [===============================>]
Checking data integrity
Ok
Checking platform compatibility
The host and the image do not have the same Solaris release:
host Solaris release: 5.11
image Solaris release: 5.10
Will create a Solaris 10 branded zone.
Checking disk-space for installation
Ok
Installing in /rpool/testzone ...
100% [===============================>]
Attaching testzone
Problem attaching testzone.
More details in /var/sadm/install/logs/solaris-10u11-sparc.log
Cleaning up and exiting.
Friday, May 10, 2013 03:18:01 PM CEST: cleaning up
root@exsolh0005:/opt/scripts#
root@exsolh0005:/opt/scripts# cat /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:56 PM CEST] ==== Starting: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
[Friday, May 10, 2013 03:17:56 PM CEST] Progress being logged to /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning datasets under rpool/testzone
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT/zbe
[Friday, May 10, 2013 03:17:56 PM CEST] Log File: /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
[Friday, May 10, 2013 03:17:57 PM CEST] Converting detached zone boot environment 'zbe'.
[Friday, May 10, 2013 03:17:57 PM CEST] Unmounting /rpool/testzone/root
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property zoned=on on rpool/testzone/rpool
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property canmount=noauto on rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property mountpoint=legacy on rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:01 PM CEST] Mounting boot environment in rpool/testzone/rpool/ROOT/zbe-0 at /rpool/testzone/root (including child datasets)
cannot open 'ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1': invalid dataset name
[Friday, May 10, 2013 03:18:01 PM CEST] ERROR: refresh of ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1 failed
[Friday, May 10, 2013 03:18:01 PM CEST] ERROR: Error: rpool/testzone/rpool/ROOT/zbe-0: No such dataset.
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning datasets under rpool/testzone
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT
[Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT/zbe
[Friday, May 10, 2013 03:18:01 PM CEST] Result: Attach Failed.
[Friday, May 10, 2013 03:18:01 PM CEST] Exiting with exit code 254
[Friday, May 10, 2013 03:18:01 PM CEST] ==== Completed: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
Looks like a script bug..
Regards
ClausHello All,
I would love to know if someone has a solution to this as I am seeing a similar issue with a slightly different setup.
Solaris 8 and Netra 240. I get the same result with and without patches and finish scripts. After the jumpstart and the failed boot attempt from disk. I can boot from cd, copy the glm driver from the cd to disk, and then everything works as it should. Obviously this is not a solution but only a work around.
Is it something to do with the SCSI hardware architecture used in the *240s?
Edited by: Gareth_Mann on Oct 2, 2007 7:41 PM -
Hi all,
Simple question I hope. I assume it is not possible to set a different time for a solaris Zone to the global Zone. Is this the case?
CheersYes. Zones do not implement a virtual machine. There is no separate clock.
Like any other process, you can set your own timezones, but that's about it.
Darren -
Error in Setting Auto Start for Oracle DB on Sun Solaris 10
Hi Gurus,
I am trying to set my DB to auto start when server reboots. Fllowing is my setting and the error. The issue is that the DB starts but LISTENER is not running...
Please please help me...
This is what I used for setting the auto start.
Thanks,
Jayant
SETTING:
=======
#!/sbin/sh
#Match ORACLE_HOME with whatever is in ~oracle/.profile!!!
ORACLE_HOME=<whatever is Orcale home is>
case $1 in
start)
su - oracle -c $ORACLE_HOME/bin/dbstart
su - oracle -c "$ORACLE_HOME/bin/lsnrctl start"
exit 0
stop)
su - oracle -c "$ORACLE_HOME/bin/lsnrctl stop"
su - oracle -c $ORACLE_HOME/bin/dbshut
esac
You're not done yet! You now have to dl
ln -s ../init.d/oracle /etc/rc3.d/S95oracle
ln -s ../init.d/oracle /etc/rc0.d/K15oracle
chmod 0755 /etc/init.d/oracle
ERROR:
======
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 02-DEC-2006 10:09:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNS-12545: Message 12545 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00515: Message 515 not found; No message file for product=network, facility=TNS
Solaris Error: 2: No such file or directory
root@zngds1gk #Bingo.... I got it.
Thanks for your hint about the ./.profile. I was setting env variables in .cshrc file and my default shell for "oracle" user was sh.
Then I changed the default shell for oracle user to csh and viola..... it works.
root@zngds1gk # su - oracle
$ id
uid=100(oracle) gid=101(dba)
$ setenv
HOME=/space/oracle
PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
LOGNAME=oracle
HZ=100
TERM=xterm
SHELL=/bin/sh
$ exit
root@zngds1gk # usermod -u 100 -s /bin/csh oracle
root@zngds1gk # su - oracle
zngds1gk%
zngds1gk% setenv
HOME=/space/oracle
PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
LOGNAME=oracle
HZ=100
TERM=xterm
SHELL=/bin/csh
zngds1gk% cat .cshrc
umask 022
setenv ORACLE_BASE /space/oracle/app/oracle
setenv ORACLE_SID adm
setenv DISPLAY 47.102.212.108:0.0
setenv ORACLE_HOME /space/oracle/app/oracle/product/10.2.0/Db_2
setenv PATH /space/oracle/app/oracle/product/10.2.0/Db_2/bin:$PATH
And now it works...
Thanks.
~Jayant -
Setting up a bridge for solaris 10
Hi,
I currently have a dual boot for on my desktop (Solaris 10 and WinXP). I'm currently looking for a way to get online while in solaris, my WinXP install is on a wireless network but it's almost impossible to find wireless drivers for solaris so i'm trying to use my ethernet capabilities.
I bought a wireless print server which has a bridge feature and i'm hoping to find some information on how to setup a bridge on my solaris install.
Any help or direction will help me a lot since I'm very new to solaris. Thank you in advanced.I have a similar issue but have not been able to get this solution to work.
I have an Airport Extreme 802.11n that is set up in bridge mode and connected to a DSL modem that assigns IP addresses.
I wish to use a remote Airport Express (late 2008) 802.11n to connect via ethernet to a PowerMac without wireless.
In summary I desire: DSL-ethernet-AirportExtreme-wireless-AirportExpress-ethernet-PowerMac
I have reset the Airport Express to factory defaults and then set to "Join wireless network" and checked allow Ethernet clients. The Airport Express gets an IP address but any number of Macs I have tried will not get an IP address in DHCP mode (except a self-assigned one). I have verified that the cable works: when I connect the Macs to the Airport Extreme base station, they all get an IP address. All versions of firmware are 7.4.1. I have also tried checking and unchecking "Allow this network to be extended" on the Airport Extreme.
Please help. Thanks -
Can I set my Calendar invites on a IOS 7 device to set at the same time, even when changing time zones. For example I am in the UK and need to set a meeting for 10am NYC time on Wednesday, but when I reach NYC I don't want the time zones to adjust which will then adjust my meeting I set in the UK to NYC time.
Here are the individual files for those that fear the my other file of virii.
Attachments:
HASP.vi 88 KB
File Setup.vi 11 KB
Gather and Output.vi 149 KB -
Download Oracle 10g Character set scanner for Solaris
http://www.oracle.com/technology/software/tech/globalization/index.html
the above link contains only the oracle 9i Character set scanner but I need the Oracle 10g Character set scanner for Solaris
please assist me.Pl see MOS Doc 745809.1 (Installing and configuring Csscan in 10g and 11g (Database Character Set Scanner)
HTH
Srini -
Are Solaris Zones approved for SAP production environments?
All,
I am trying to find an official document from SAP that confirms that Solaris Zones are approved for use in SAP NW production environments. I checked the product availability matrix but it does not address Containers or Zones.
Thanks,
GuentherThey don't state it explicitly because you can use it. I comes with the operating system and if they would deny that, there would a be a note stating that explicitly.
On top of that, SAP would not create notes how to install and configure a zone if it wouldn't be supported
We run many instances under zones (production, test, sandbox) and make use of ZFS heavily and it works like a charm.
Markus
root@consbig / >zoneadm list -vi
ID NAME STATUS PATH
0 global running /
4 crmtest running /zone/crmtest
5 crmqual running /zone/crmqual
6 srmtest running /zone/srmtest
7 solmgrt running /zone/solmgrt
8 epjava running /zone/epjava
124 tdmshost running /zone/tdmshost
128 nwdi_ext_1 running /zone/nwdi_ext_1
148 icht running /zone/icht
204 scheduler running /zone/scheduler
217 ichp running /zone/ichp
220 appl2mp1 running /zone/appl2mp1
221 solmgrt running /zone/solmgrt
236 output running /zone/output
252 bicopy running /zone/bicopy
267 kerberos running /zone/kerberos
289 spnego running /zone/spnego
root@consbig / >zpool iostat
capacity operations bandwidth
pool used avail read write read write
dbdata 4,73T 64,1G 68 6 8,34M 430K
dblog 34,6G 15,2G 0 16 62,1K 123K
usrsap 118G 80,9G 2 26 188K 157K
zone 54,7G 44,8G 0 31 56,1K 135K -
/usr/lib/extendedFILE.so.1 for Solaris 9
Hi All,
How do I get /usr/lib/extendedFILE.so.1 in Solaris 9.What would be the quickest way to download that.
I tried changing the system file but set
# set rlim_fd_max=8192 ; hard limit (per process)
# set rlim_fd_cur=1024 ; soft limit (per process)
But it is not effective and also checked the /etc/profile nothing is there which resets the value to 256.I am not able to open more than 253 files still.
Looking forward for help.
Thanks
-AAs per (Doc ID 316806.1) and (Doc ID 1205388.1) this warning message can be ignored.
Is this the only warning/error message you see in the CM log file?
Was this working before? If yes, any changes been done recently?
Can you find any errors in the database log file?
Have you tried to run cmclean.sql and relink FND executable files and see if it helps?
Thanks,
Hussein -
Reserve memory for global zone
Hello,
Is there a way / method to reserve certain amount of RAM only for the global zone?
I have a server (Solaris 10 10/08) with 5 zones on it and instead of setting memory caps on each zone, I would like to reserver some memory for the global zone exclusively.
Sorry if the question has already been asked. Please point me to the thread.Hello,
Is there a way / method to reserve certain amount of RAM only for the global zone?
I have a server (Solaris 10 10/08) with 5 zones on it and instead of setting memory caps on each zone, I would like to reserver some memory for the global zone exclusively.
Sorry if the question has already been asked. Please point me to the thread. -
Zfs core dumps in Solaris Zones after patchcluster installation
Hi
I've installed the recommended patch cluster for Solaris 10 (SPARC) on my T2000 Server.
Now after the reboot all the Solaris Zones (got about 10 of them) instantly do zfs core dumps when their booted.
Some Output:
Dec 15 15:34:43 XXXXX genunix: NOTICE: core_log: zfs[1711] core dumped: /var/core/core_XXXXXX_zfs_0_0_1292423682_1711
bash-3.00# svcs
STATE STIME FMRI
online 13:58:50 svc:/system/svc/restarter:default
online 13:58:51 svc:/system/filesystem/root:default
online 13:58:51 svc:/network/loopback:default
online 13:58:53 svc:/network/pfil:default
online 13:58:54 svc:/system/installupdates:default
online 13:58:55 svc:/system/boot-archive:default
online 13:58:56 svc:/network/physical:default
online 13:58:57 svc:/system/filesystem/usr:default
online 13:58:57 svc:/system/identity:node
online 13:58:58 svc:/system/device/local:default
online 13:58:58 svc:/system/keymap:default
online 13:58:58 svc:/milestone/devices:default
online 13:58:58 svc:/system/filesystem/minimal:default
online 13:58:58 svc:/system/rmtmpfiles:default
online 13:58:58 svc:/system/cryptosvc:default
online 13:58:59 svc:/system/identity:domain
online 13:58:59 svc:/system/name-service-cache:default
online 13:58:59 svc:/system/coreadm:default
online 13:58:59 svc:/network/ipsec/ipsecalgs:default
online 13:58:59 svc:/application/print/ppd-cache-update:default
online 13:58:59 svc:/network/ipsec/policy:default
online 13:59:00 svc:/milestone/network:default
online 13:59:00 svc:/network/initial:default
online 13:59:00 svc:/system/manifest-import:default
online 13:59:00 svc:/network/service:default
online 13:59:00 svc:/milestone/single-user:default
online 13:59:00 svc:/network/dns/client:default
online 13:59:00 svc:/network/routing-setup:default
online 13:59:00 svc:/milestone/name-services:default
online 13:59:03 svc:/milestone/sysconfig:default
online 13:59:03 svc:/system/utmp:default
online 13:59:03 svc:/system/console-login:default
offline 13:58:51 svc:/system/sysidtool:net
offline 13:58:51 svc:/network/rpc/bind:default
offline 13:58:51 svc:/system/sysidtool:system
offline 13:58:52 svc:/network/nfs/status:default
offline 13:58:52 svc:/network/nfs/nlockmgr:default
offline 13:58:52 svc:/network/nfs/cbd:default
offline 13:58:52 svc:/network/nfs/mapid:default
offline 13:58:52 svc:/network/inetd:default
offline 13:58:52 svc:/network/nfs/client:default
offline 13:58:52 svc:/system/filesystem/autofs:default
offline 13:58:53 svc:/system/system-log:default
offline 13:58:53 svc:/network/smtp:sendmail
offline 13:58:53 svc:/system/cron:default
offline 13:58:53 svc:/milestone/multi-user:default
offline 13:58:54 svc:/application/management/snmpdx:default
offline 13:58:54 svc:/application/management/dmi:default
offline 13:58:54 svc:/application/management/seaport:default
offline 13:58:54 svc:/network/ssh:default
offline 13:58:54 svc:/milestone/multi-user-server:default
offline 13:58:54 svc:/application/font/fc-cache:default
offline 13:58:55 svc:/application/management/sma:default
offline 13:58:58 svc:/system/sac:default
offline 13:59:00 svc:/network/shares/group:default
offline 13:59:00 svc:/system/boot-archive-update:default
maintenance 15:34:43 svc:/system/filesystem/local:default
uninitialized 13:58:52 svc:/network/rpc/gss:default
uninitialized 13:58:54 svc:/application/font/stfsloader:default
uninitialized 13:58:55 svc:/network/rpc/rstat:default
uninitialized 13:58:55 svc:/application/print/rfc1179:default
uninitialized 13:58:55 svc:/application/x11/xfs:default
uninitialized 13:58:55 svc:/network/finger:default
uninitialized 13:58:55 svc:/network/ftp:default
uninitialized 13:58:56 svc:/network/login:rlogin
uninitialized 13:58:56 svc:/network/nfs/rquota:default
uninitialized 13:58:56 svc:/network/rpc/rusers:default
uninitialized 13:58:56 svc:/network/rpc/smserver:default
uninitialized 13:58:57 svc:/network/security/ktkt_warn:default
uninitialized 13:58:57 svc:/network/shell:default
uninitialized 13:58:57 svc:/network/telnet:default
uninitialized 13:58:58 svc:/network/rpc-100235_1/rpc_ticotsord:default
uninitialized 13:58:58 svc:/network/rpc/cde-calendar-manager:default
uninitialized 13:58:59 svc:/network/rpc/cde-ttdbserver:tcp
bash-3.00# svcs -x
svc:/system/filesystem/local:default (local file system mounts)
State: maintenance since Wed Dec 15 15:34:43 2010
Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
See: http://sun.com/msg/SMF-8000-KS
See: /var/svc/log/system-filesystem-local:default.log
Impact: 24 dependent services are not running. (Use -v for list.)
svc:/network/rpc/gss:default (Generic Security Service)
State: uninitialized since Wed Dec 15 13:58:52 2010
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: gssd(1M)
Impact: 11 dependent services are not running. (Use -v for list.)
svc:/network/rpc/rstat:default (kernel statistics server)
State: uninitialized since Wed Dec 15 13:58:55 2010
Reason: Restarter svc:/network/inetd:default is not running.
See: http://sun.com/msg/SMF-8000-5H
See: rpc.rstatd(1M)
See: rstatd(1M)
Impact: 1 dependent service is not running. (Use -v for list.)
bash-3.00# cat /var/svc/log/system-filesystem-local:default.log
[ Jul 10 03:41:35 Enabled. ]
[ Jul 10 03:43:45 Rereading configuration. ]
[ Jul 10 03:44:17 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 03:44:18 Method "start" exited with status 0 ]
[ Jul 10 12:44:36 Enabled. ]
[ Jul 10 12:44:45 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 12:44:45 Method "start" exited with status 0 ]
[ Jul 10 12:45:03 Enabled. ]
[ Jul 10 12:45:09 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 12:45:09 Method "start" exited with status 0 ]
[ Jul 10 13:54:39 Enabled. ]
[ Jul 10 13:54:46 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 10 13:54:46 Method "start" exited with status 0 ]
[ Jul 18 12:34:19 Enabled. ]
[ Jul 18 12:34:27 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 18 12:34:27 Method "start" exited with status 0 ]
[ Jul 18 17:29:08 Enabled. ]
[ Jul 18 17:29:15 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 18 17:29:15 Method "start" exited with status 0 ]
[ Jul 19 11:13:34 Enabled. ]
[ Jul 19 11:13:42 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 11:13:42 Method "start" exited with status 0 ]
[ Jul 19 11:32:23 Enabled. ]
[ Jul 19 11:32:30 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 11:32:31 Method "start" exited with status 0 ]
[ Jul 19 11:57:06 Enabled. ]
[ Jul 19 11:57:13 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 11:57:13 Method "start" exited with status 0 ]
[ Jul 19 12:40:05 Enabled. ]
[ Jul 19 12:40:12 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 19 12:40:12 Method "start" exited with status 0 ]
[ Jul 20 15:51:46 Enabled. ]
[ Jul 20 15:51:54 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 20 15:51:54 Method "start" exited with status 0 ]
[ Jul 24 11:42:17 Enabled. ]
[ Jul 24 11:42:25 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 24 11:42:25 Method "start" exited with status 0 ]
[ Jul 27 12:05:06 Stopping because service disabled. ]
[ Jul 27 12:05:07 Executing stop method (null) ]
[ Jul 27 12:13:10 Enabled. ]
[ Jul 27 12:13:17 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 27 12:13:17 Method "start" exited with status 0 ]
[ Jul 27 13:10:26 Stopping because service disabled. ]
[ Jul 27 13:10:26 Executing stop method (null) ]
[ Jul 27 13:18:19 Enabled. ]
[ Jul 27 13:18:26 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 27 13:18:26 Method "start" exited with status 0 ]
[ Jul 31 10:12:31 Enabled. ]
[ Jul 31 10:12:38 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jul 31 10:12:39 Method "start" exited with status 0 ]
[ Aug 7 10:08:52 Stopping because service disabled. ]
[ Aug 7 10:08:52 Executing stop method (null) ]
[ Aug 7 10:34:50 Enabled. ]
[ Aug 7 10:34:57 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 7 10:34:58 Method "start" exited with status 0 ]
[ Aug 9 09:14:50 Stopping because service disabled. ]
[ Aug 9 09:14:50 Executing stop method (null) ]
[ Aug 9 09:55:03 Enabled. ]
[ Aug 9 09:55:10 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 9 09:55:11 Method "start" exited with status 0 ]
[ Aug 16 10:46:43 Enabled. ]
[ Aug 16 10:46:50 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 10:46:50 Method "start" exited with status 0 ]
[ Aug 16 12:06:56 Enabled. ]
[ Aug 16 12:07:02 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 12:07:02 Method "start" exited with status 0 ]
[ Aug 16 13:45:10 Enabled. ]
[ Aug 16 13:45:16 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 13:45:16 Method "start" exited with status 0 ]
[ Aug 16 14:36:59 Enabled. ]
[ Aug 16 14:37:07 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 14:37:07 Method "start" exited with status 0 ]
[ Aug 16 15:00:40 Enabled. ]
[ Aug 16 15:00:47 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 16 15:00:47 Method "start" exited with status 0 ]
[ Aug 22 16:00:13 Enabled. ]
[ Aug 22 16:00:21 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 22 16:00:21 Method "start" exited with status 0 ]
[ Aug 23 09:49:04 Enabled. ]
[ Aug 23 09:49:10 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 23 09:49:11 Method "start" exited with status 0 ]
[ Aug 23 09:49:23 Stopping because service disabled. ]
[ Aug 23 09:49:23 Executing stop method (null) ]
[ Aug 23 10:04:13 Enabled. ]
[ Aug 23 10:04:20 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 23 10:04:20 Method "start" exited with status 0 ]
[ Aug 23 10:06:57 Enabled. ]
[ Aug 23 10:07:04 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 23 10:07:05 Method "start" exited with status 0 ]
[ Oct 23 08:43:05 Enabled. ]
[ Oct 23 08:43:14 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Oct 23 08:43:14 Method "start" exited with status 0 ]
[ Nov 21 14:51:50 Enabled. ]
[ Nov 21 14:51:58 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Nov 21 14:51:59 Method "start" exited with status 0 ]
[ Nov 29 15:33:19 Enabled. ]
[ Nov 29 15:33:26 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Nov 29 15:33:27 Method "start" exited with status 0 ]
[ Dec 18 13:37:35 Enabled. ]
[ Dec 18 13:37:42 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 18 13:37:42 Method "start" exited with status 0 ]
[ Dec 19 08:48:07 Enabled. ]
[ Dec 19 08:48:14 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 19 08:48:14 Method "start" exited with status 0 ]
[ Dec 19 08:56:07 Enabled. ]
[ Dec 19 08:56:14 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 19 08:56:14 Method "start" exited with status 0 ]
[ Dec 19 08:57:41 Enabled. ]
[ Dec 19 08:57:48 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Dec 19 08:57:48 Method "start" exited with status 0 ]
[ Feb 1 10:39:48 Enabled. ]
[ Feb 1 10:39:55 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Feb 1 10:39:56 Method "start" exited with status 0 ]
[ Feb 8 11:12:50 Enabled. ]
[ Feb 8 11:12:57 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Feb 8 11:12:57 Method "start" exited with status 0 ]
[ Jun 6 10:08:34 Enabled. ]
[ Jun 6 10:08:44 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Jun 6 10:08:46 Method "start" exited with status 0 ]
[ Aug 8 09:45:48 Enabled. ]
[ Aug 8 09:46:35 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 8 09:46:36 Method "start" exited with status 0 ]
[ Aug 14 17:53:59 Enabled. ]
[ Aug 14 17:54:06 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 14 17:54:06 Method "start" exited with status 0 ]
[ Aug 14 17:55:20 Enabled. ]
[ Aug 14 17:55:27 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 14 17:55:27 Method "start" exited with status 0 ]
[ Aug 18 15:19:17 Enabled. ]
[ Aug 18 15:19:24 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 18 15:19:24 Method "start" exited with status 0 ]
[ Aug 29 12:56:48 Enabled. ]
[ Aug 29 12:56:55 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 29 12:56:55 Method "start" exited with status 0 ]
[ Oct 13 11:59:43 Enabled. ]
[ Oct 13 11:59:50 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Oct 13 11:59:51 Method "start" exited with status 0 ]
[ Feb 26 16:47:00 Enabled. ]
[ Feb 26 16:47:07 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Feb 26 16:47:07 Method "start" exited with status 0 ]
[ Apr 14 15:54:17 Enabled. ]
[ Apr 14 15:54:24 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Apr 14 15:54:25 Method "start" exited with status 0 ]
[ Aug 28 08:49:58 Stopping because service disabled. ]
[ Aug 28 08:49:58 Executing stop method (null) ]
[ Aug 28 08:52:54 Enabled. ]
[ Aug 28 08:53:01 Executing start method ("/lib/svc/method/fs-local") ]
bootadm: this operation is not supported on sparc
[ Aug 28 08:53:01 Method "start" exited with status 0 ]
[ Aug 28 09:08:20 Stopping because service disabled. ]
[ Aug 28 09:08:20 Executing stop method (null) ]
[ Sep 1 16:05:36 Enabled. ]
[ Sep 1 16:06:05 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 1 16:06:05 Method "start" exited with status 0 ]
[ Sep 1 19:29:19 Enabled. ]
[ Sep 1 19:29:27 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 1 19:29:27 Method "start" exited with status 0 ]
[ Sep 1 23:04:00 Enabled. ]
[ Sep 1 23:04:08 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 1 23:04:08 Method "start" exited with status 0 ]
[ Sep 2 00:23:41 Stopping because service disabled. ]
[ Sep 2 00:23:42 Executing stop method (null) ]
[ Sep 2 00:46:46 Enabled. ]
[ Sep 2 00:46:53 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 2 00:46:54 Method "start" exited with status 0 ]
[ Sep 26 12:04:34 Enabled. ]
[ Sep 26 12:04:41 Executing start method ("/lib/svc/method/fs-local") ]
[ Sep 26 12:04:42 Method "start" exited with status 0 ]
[ Oct 20 13:05:09 Stopping because service disabled. ]
[ Oct 20 13:05:10 Executing stop method (null) ]
[ Oct 20 13:24:01 Enabled. ]
[ Oct 20 13:24:08 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 20 13:24:09 Method "start" exited with status 0 ]
[ Oct 21 16:30:59 Enabled. ]
[ Oct 21 16:31:09 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 21 16:31:09 Method "start" exited with status 0 ]
[ Oct 21 16:32:42 Stopping because service disabled. ]
[ Oct 21 16:32:42 Executing stop method (null) ]
[ Oct 21 16:42:05 Enabled. ]
[ Oct 21 16:42:15 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 21 16:42:15 Method "start" exited with status 0 ]
[ Oct 21 17:27:37 Enabled. ]
[ Oct 21 17:27:47 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 21 17:27:47 Method "start" exited with status 0 ]
[ Oct 22 11:08:34 Enabled. ]
[ Oct 22 11:08:43 Executing start method ("/lib/svc/method/fs-local") ]
[ Oct 22 11:08:43 Method "start" exited with status 0 ]
[ Dec 9 09:17:33 Stopping because service disabled. ]
[ Dec 9 09:17:33 Executing stop method (null) ]
[ Dec 10 11:47:14 Enabled. ]
[ Dec 10 11:47:24 Executing start method ("/lib/svc/method/fs-local") ]
[ Dec 10 11:47:25 Method "start" exited with status 0 ]
[ Dec 15 10:52:25 Stopping because service disabled. ]
[ Dec 15 10:52:25 Executing stop method (null) ]
[ Dec 15 12:42:16 Enabled. ]
[ Dec 15 12:42:26 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 12:42:28 Method "start" exited with status 95 ]
[ Dec 15 13:13:19 Enabled. ]
[ Dec 15 13:13:28 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 13:13:30 Method "start" exited with status 95 ]
[ Dec 15 13:58:51 Enabled. ]
[ Dec 15 13:59:00 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 13:59:03 Method "start" exited with status 95 ]
[ Dec 15 15:34:41 Leaving maintenance because clear requested. ]
[ Dec 15 15:34:41 Enabled. ]
[ Dec 15 15:34:41 Executing start method ("/lib/svc/method/fs-local") ]
Abort - core dumped
WARNING: /usr/sbin/zfs mount -a failed: exit status 134
[ Dec 15 15:34:43 Method "start" exited with status 95 ]
bash-3.00# /usr/sbin/zfs mount -a
internal error: Unknown error
Abort (core dumped)
Before that I've installed the patch cluster with halted solaris zones which produced following output:
Application of patches finished : 2010.12.15 12:08:43
Following patches were applied :
119254-77 119812-10 125719-31 140159-03 142911-01
141588-04 119900-11 125731-05 142292-01 142933-02
142251-02 119906-16 126206-05 141444-09 142909-17
118666-28 120460-17 126363-08 141500-07 143140-04
118667-28 121012-03 126365-16 141502-02 143502-01
118777-16 121308-20 126868-04 141506-09 143506-01
140860-02 122212-40 127724-02 141514-02 143615-02
119059-56 122261-03 136998-09 141518-12 143731-01
119213-23 122675-05 137000-07 141552-03 143733-01
124628-10 123003-04 137080-05 141558-01 143977-01
119252-29 123590-12 137147-06 141586-01 144053-04
119280-23 123893-22 138195-04 141590-02 144106-01
124188-03 124393-11 138822-07 141874-09 144254-01
120199-15 124457-02 138826-07 141876-07 144488-04
119534-19 124630-42 138880-02 142084-04 144492-01
120272-28 125215-03 139099-04 142397-01 145124-01
119757-18 125388-03 139620-01 142529-01 145796-01
119783-15 125555-07
Following patches were skipped :
Patches already applied
120900-04 119063-01 119810-05 123005-07 137093-01
121133-02 119081-25 119986-03 124444-01 138866-03
119317-01 119130-33 120061-02 124939-03 137137-09
121296-01 123611-04 120201-05 124943-01 137871-02
138215-01 140899-01 120292-02 124997-01 138181-01
127884-01 122640-05 120329-02 125279-05 138361-01
118712-23 126897-02 121975-01 125539-06 138373-02
118918-24 127755-01 120719-02 125891-01 138647-01
138217-01 125503-02 120830-06 126440-01 141016-01
119578-30 125547-02 121095-02 126540-02 139555-08
121453-02 140796-01 121606-04 127127-11 139967-01
121453-02 120011-14 124171-07 136882-02 140455-01
121118-16 139520-02 123630-03 137032-01 140563-01
118833-36 119764-06
Patches obsoleted by one or more patches already applied
118731-01 124204-04 122660-10
Patches not applicable to packages on the system
121181-03 120410-33 121211-02 125533-15 143317-03
119115-35 120412-11 122259-03 125541-06 143510-01
119117-52 120414-27 122470-03 125952-20 143725-01
119315-19 120543-21 122911-24 137004-08 143727-01
119548-14 120739-06 122958-06 138387-01 143739-01
119903-02 120811-09 123938-02 138824-07 144325-01
120094-30 120849-04 125136-24 138876-01 145006-02
120185-21 121104-11 125137-24 139986-01 145080-01
119368-04 121136-02 125332-14 142244-02 145200-01
120286-03
Installation of patch set complete. PLEASE REBOOT THE SYSTEM.
when i tried to reboot the system by init 6 the service iscsi hanged and produced syslog errors about a unkown iocall -> killed the process. System rebooted w/o errors.
Does anyone have got an idea how to find out which patch or whatever do produce these errors?Hi,
I'm having the same issue of diskmon core dumps after upgrading grid and database from 11.2.0.1 to 11.2.0.2 on Solaris 10 x86-64. Following this thread, I'm trying to deinstall the Oracle 11.2.0.1 grid home.
I answered the following questions asked by the grid deinstall tool:
1. ASM configuration was not detected in this Oracle home. Was ASM configured in this Oracle home (y|n): y
2. Specify the ASM Diagnostic Destination: /db01/app/oracle/diag/asm/+ASM
3. Specify the diskgroups that are managed by this ASM instance: DATA FRA
4. De-configuring ASM will drop all the diskgroups at cleanup time. Do you want deconfig tool to drop the diskgroups:
If I answer no to question 1, the tool exits with error.
How do I answer question #4? (confused about this question of dropping diskgroups, it's already been upgraded)
Deinstall of Oracle db Home 11.2.0.1 was successful.
The +ASM instance has been upgraded and is running fine under 11.2.0.2 except for the excessive diskmon core dumps.
Thanks,
Lisa
Edited by: user12018917 on Apr 19, 2011 10:21 AM
Maybe you are looking for
-
Content Server error on LINUX (HTTP error: 404 Not Found)
Hi All, While checking the status of content sever by using the T-code CSADMIN I am getting the following error message. <b>*********************************************************** Error : - HTTP error: 404 Not Found Message no. CMS025 Diagnosis E
-
EMC Replication Manager Client on Solaris 10 Zone?
Hello, Hoping I could find out if anyone out there has had success running EMC's Replication Manager (client) on a Solaris zone where an Oracle database is running, and how it was installed. Normally we install 3rd party software on the Global host /
-
SOLMAN 7.1 Managed system(Maintain RFC's Step)
Hi All, I am performing Managed System Configuration for PI system. In the Maintain RFC's step I am facing below error. SOLMAN (7.1 sp12). Kindly help me by suggesting how to resolve this issue. I am attaching screen shots. If these can help Thanks a
-
We are currently in the design process for an application that will use an ORM and are trying to create an object model that will make the most sense for using the ORM to save data to the database. At this time, we will not be using the ORM to instan
-
Error importing clip in iMovie, large file still exists somewhere
I'm running the newest version of iMovie and lately I've tried to import large clips from my camcorder only to result in an "Error" when importing. That's pretty annoying on its own, but to make matters worse, those extremely large files exist somew