Setting Dynamic values to the payload-name / Content Desc

Hi All,
I am using a PayloadZIp module and i am trying to zip the file and retain the filename.
For this i have done the following things. I have used PayloadZIp in the Sender channel. In the recv channel used the DynamicConfigurationBean and wrote the value as a part of message_interface and then using variable substitution i have configured made the filename as the sender name.zip
for eg if the file zipped at the sender side is name1.txt the recv channel would be name1.txt.zip where the variable substituiton would have the value name1.txt
but the problem is that the value of the file inside the zip is not name1,txt . I would like it to be name1.txt
I have used the messageTransformBean and stuff tried setting the ContentTypes Desc all of them take constant values. i am not able to set the real filename as the filename for the attachment.
Can anyone share their views on this and let meknow hw i can achieve this
Rgds
aditya

Hi
> I am using a PayloadZIp module and i am trying to zip the file and retain the filename.
> For this i have done the following things. I have used PayloadZIp in the Sender channel.
If you are trying to zip a file, then why are you using the PayloadZipbean on the Sender CC, you should use the module on the Receiver CC.
> for eg if the file zipped at the sender side is name1.txt the recv channel would be name1.txt.zip where the variable substituiton would have the value name1.txt
>
> but the problem is that the value of the file inside the zip is not name1,txt . I would like it to be name1.txt
>
What file name are you getting now?
have a look at this blog : http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417700%29ID0591392850DB01436613452367233705End?blog=/pub/wlg/5899
Pooja.

Similar Messages

How to set Dynamic value to context variable

hi all
Can anyone suggest me how to change value of context variable.
In short i need to set dynamic value to context variable
here is my code in web.xml
*<context-param>*
*<param-name>sessionTimeOutValue</param-name>*
*<param-value>200</param-value>*
*</context-param>*

ChintanPatel wrote:
here is my code in web.xml
*<context-param>*
*<param-name>sessionTimeOutValue</param-name>*
*<param-value>200</param-value>*
*</context-param>*You can set the session time using httpsession.setmaxinactiveinterval

How to assign a dynamic value to the value property of a button ?

Hi Folks,
I have a need, can i know how to assign a dynamic value to the value property of a button. Scenario is like follows...
This is a struts based web application
1. I have a file which consists of login user details (user name and his previlages) for a web application.
2. I got those user details, into a List.
3. When a user logged into the web app, in the home page there are few buttons. The type and number of buttons shown depends on the type of user/ user. (Buttons have different combination and the number of buttons available are not constant, they will vary from user to user).
4. for each button, there will be a different action. I can pass the value of a button to an action class, but here button must have a dynamic value.
Here is my test code:
<%
if (List != null)
for (int i = 0; i <List.length; i++)
%>
<html:submit property="rduname" value= "<%=List%>" onclick="return submitRdu('<%=List[i] %>');"/>
<%
%>
But my problem is how to assign a dynamic value to the value property of the button ( i know 'value= "<%=List[i]%>" ' will not work, just wanted show you guys).
Thanks in advance,
UV
Edited by: UV_Dev on Oct 9, 2008 2:15 PM

Let me try i know am not good at JSP but do we need double quotes here
value= <%=List%>i think JSTL should help you about the dynamic thing

Dynamic change in the query name based on user input

Hi Gurus,
In a scenario, country appears as a user input variable.When the user specifies his country, the same query displays Business trends' data pertaining to his own country and rest of the world(international) in two tables.The reports are developed using Web application designer.
Can the name(description) of the query be changed so that the user input value for country gets dynamically reflected in the query name like Business trends:Selected country vs International?
Regards,
Balaji

Hi Bala,
ya this can be done by text variables. create a text variable( replacement path on the country infoobject) by going to the query properties on the description.
if the user enters country value then it will be displaed on the description of the query .
assign points if useful .
regards
santosh

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

How to set default values on the screen painter parameters?

Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.

Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
reward points if useful.
regards,
Vinod Samuel.

Badi for setting default values in the transaction in APO.

BADI NAME: SMOD_APOCF005 which is used for setting default values in the transaction.
I have implemented the BADI using the below code but that BADI is not triggering. Please can you provide any solution for resolving this.
As per my requirement I am trying to set default values for these three fields RRP_TYPE, WHATBOM, CONVH.
DATA: LS_MATLOC LIKE LINE OF IT_MATLOC.
LOOP AT IT_MATLOC INTO LS_MATLOC.
LS_MATLOC-RRP_TYPE = '4'.
LS_MATLOC-WHATBOM = '5'.
LS_MATLOC-CONVH = '999'.
MODIFY TABLE IT_MATLOC FROM LS_MATLOC TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.
DATA: LS_MATLOCX LIKE LINE OF IT_MATLOCX.
LOOP AT IT_MATLOCX INTO LS_MATLOCX.
LS_MATLOCX-RRP_TYPE = 'X'.
LS_MATLOCX-WHATBOM = 'X'.
LS_MATLOCX-CONVH = 'X'.
MODIFY TABLE IT_MATLOCX FROM LS_MATLOCX TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.

The BADI name: SMOD_APOCF005 .
T.code at APO : /sapapo/mat1
Once we enter in that T.Code with some Product and Location data.
There under PP/DS tab.
Under Planning Procedure there is a field PP Plng Procedure which I want to set as 4
And under Order Creation there is Plan Explosion which needs to be set as 5
And Under Horizons there is PP/DS Horizon which needs to be set as 999.
BADi is implemented and active.
And once the data is CIF from ECC to APO
These default values are not set in the T code in APO and the BADi is not triggering.

How do I get a new value for the service name field and update it in Connection Properties?

I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?

When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks

How to mask values in the payload

Hi
I have a requirement where I have to mask the values in the payload so that it does not appear in the Monitoring transactions.
Example credit card numbers
If anyone has an idea how to achieve it please let me know.
Regards
Nikhil

Hi Nikhil,
You can encrypt message payloads within XI and then your target system can decrypt it. For this you can use some Function Module like this one(FIEB_PASSWORD_ENCRYPT). It encrypts a given string. You may use this to create your own, as per requirement. You may find some other code samples on SDN.
Please also have a look on the following document for Message Level Security
[http://help.sap.com/saphelp_nw04s/helpdata/en/a8/882a40ce93185de10000000a1550b0/frameset.htm]
Regards,
Jitender

Populating dynamic values in the combobox with XML form Builder.

I am trying to populate dynamic value in the combobox with xml form builder. I see the document saying create property group and document property Id with respecitive values. I am able to create the property group with system admin -> System config
-> KM -> CM -> Global services -> property Metadata -> groups with new button. and I am trying to create document property Id with value. I am not able to find the way to give value in the property. I am using EP 7.0 Sp 14. Please let me know how to sovel it

Hi
You can create new property metadata with System Admin > System Config > KM > CM > Global services > Property Metadata > Properties > New. Specify the values for this metadata as the ones you need to have in the combo box. Use allowed values parameter of the matadata to sepcify the values. Each metadata property will have unique property ID and you can map this property ID to your combo box in xml forms.
Give it a try.
Regards,
Yoga

How to set a value to the TextField on keyPress Event?

Hai,
I am using Jdev 11g.
In my jspx page,i have an Input Text...I want to set a value to that input text when i press any button (say F2) inside that text field .I tried with clientListener and server Listener..But it is not set.
In jspx page
*========*
<f:facet name="metaContainer">
<trh:script>
function onKeypressClientListner(evt) {
var _txtField; var valueStr;
_txtField = evt.getSource();
if (evt.getKeyCode() == AdfKeyStroke.F2_KEY) {
valueStr = _txtField.getSubmittedValue()
AdfCustomEvent.queue(_txtField,"onKeyPressServerListner",{payload:valueStr}, true); evt.cancel();
</trh:script>
</f:facet>
<af:inputText label="Label 1" id="it1"
binding="#{backing_CheckKeyPress.itxtInputText}">
<af:clientListener method="onKeypressClientListner" type="keyUp"/>
<af:serverListener type="onKeyPressServerListner"
method="#{backing_CheckKeyPress.serverKeyListner}"/>
</af:inputText>
In CheckKeyPress.java
*======*
public void serverKeyListner(ClientEvent clientEvent)
System.out.println("Inside Server Listener");
itxtInputText.setValue("Hai");
AdfFacesContext.getCurrentInstance().addPartialTarget(itxtInputText);
After executing this,program will give output as Inside Server Listener . But the TextField value is not setting..

I got it..Just set immediate property to true

Dynamically value of the screen variable

I have created one box on screen. Box name is Suppose AA and Text also AA. How can I change the Box text name dynamically. Based on Plant field(in another box but same window) I wanted to change the Text from AA to Plant Value. Please let me know how can I do it.
Thanks
ASD

If you are trying to do this in a dynpro, here is some code which illistrates that.
* This program demonstrates how to dynamically add text to
* a box/frame at runtime.
report zrich_0005 .
** Make sure that the box/frame is set as OUTPUT and the name
** of the box/frame is BOX_NAME.
parameters: p1 radiobutton group grp1 default 'X',
            p2 radiobutton group grp1.
data: box_name(30) type c.
data: ok_code type sy-ucomm.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
*       text
module status_0100 output.
set pf-status '0100'.
* SET TITLEBAR 'xxx'.
if p1 = 'X'.
    box_name = 'P1 was pressed'.
elseif p2 = 'X'.
    box_name = 'P2 was pressed'.
endif.
endmodule.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
module user_command_0100 input.
case ok_code.
    when 'BACK'.
      set screen 0.
      leave screen.
endcase.
endmodule.                 " USER_COMMAND_0100 INPUT
Regards,
Rich Heilman

Setting components values in the ADF page load time

Hi,
We are trying to set the components labels dynamically, so each time the page is loaded we are loading the related labels from the database, instead of using the default database column names driven labels.
We get the labels text okay from the database in the afterPhase method, but we do not have access to the output text UI items then, so a call scuh as this getOutputText1() will return null.
We have also tried to use value binding for the output text, e.g. value=#{backing_untitled2.verbiage}, where verbiage attribute was set in the afterPhase method. The method is called okay and sets the attribute, but for some reason the attribute is then set back and displayed as null.
The same code is executed okay in a command button.
Any idea why is that failing, or how to populate these labels dynamically in the page load time better than the above?
Thanks in advance
Mohamed Elmallah

Hi,
I think you should re-think your strategy and not read the labels from the database all the time. Instead, read it into a class that extends HashMap one time and put it into the session. Then reference the bean #{sessionScope.beanname['label'], which will call the HashMap's getter method. Use the "label" name to find the label for the particular key
If you r application becomes big, you may want to think of handling the session bean size through leaning it under specific conditions
Frank

How can I add form field value to the file name in save as dialog box

I do not want the form to be saved automatically, just want the form to auto populate the "file name" only.
A little background on the forms I want to use: My company has 70 retail outlets, I'll use one of our pdf forms called an "Incident Report" as an example. I would like for a store manager to be able to complete the form, then email the form to the main office (I already have javascript to add field values and form name to the email subject line), once the main office receives it, I want for them to be able to file the pdf electronically on our server. We have mutliple forms that we use so I do not want any of the forms to automatically save anywhere, (at this time anyway) I just want the office personnel to be able to click "save as" (or whatever they will need to click) and the form automatically add certain field values from the pdf they have received, of which will be different each time the form is sent to the office (Date, store #, employee name etc.) in addition to the name of the form in the "File name" of the "Save As" dialog box. The main office employees will decide into which server file the pdf should be saved.
I'm using Acrobat 8 professional, the stores and office personnel use Adobe reader.
One little note: We currently print and file a lot of paper on a daily bases, as soon as I can get this to work, we are going green.
Me and a lot of trees in this will really apprecitate any help you can give with this! :-)

You might want to take a look at the document "Developing Acrobat Applications Using JavaScript" (js_developer_guide.pdf) which is part of the Adobe Acrobat SDK, which can be downloaded here. Read the "Privileged versus non-privileged context" (p. 45ff.). You will find an example for "Executing privileged methods in a non-privileged context". Should be almost exactly what you are looking for.
Small Outline: For security reasons ("the user always has to know what's going on") you are not allowed to use the "Doc.saveAs"-method without the user permission (--> in a non-privileged context). In order to reach the goal of a privileged context you can use a trusted function. You do this by creating a JavaScript file (*.js) in either the Application-JavaScript-Folder (default location on Windows systems: "%ProgramFiles%\Adobe\Acrobat 10.0\Acrobat\Javascripts") or the User-JavaScript-Folder (default location on Windows systems: "%AppData%\Adobe\Acrobat\10.0\JavaScripts"). Add the following content to the new file:
myTrustedBrowseForDoc = app.trustedFunction( function ( oArgs ) {
     app.beginPriv();
          var myTrustedRetn = app.browseForDoc( oArgs );
     app.endPriv();
     return myTrustedRetn;
myTrustedSaveAs = app.trustedFunction( function ( doc, oArgs ) {
     app.beginPriv();
          var myTrustedRetn = doc.saveAs( oArgs );
     app.endPriv();
     return myTrustedRetn;
The developer guide actually wants you to add this content to the existing "config.js" file. I recommend creating a new file, since its easier to deploy in a network. Either way, every client/user who needs to be able to save documents this way, needs this JavaScript Code in his Application/User-JavaScript-Folder.
Within the Acrobat Document, which you want to obtain a certain file name, you can now use the trusted functions "myTrustedBrowseForDoc" and "myTrustedSaveAs" to store the file. To call the trusted functions and deliver the file name you can either you use a form field (button) or you add a new menu item. Add the following JavaScript Action to the button/menu item and change "Roller Coaster" to the name of the field which contains the value which you want to become the new file name:
var fileName = this.getField("Roller Coaster").valueAsString;
try {
     var oRetn = myTrustedBrowseForDoc({bSave: true, cFilenameInit: fileName + ".pdf"});
     try {
          myTrustedSaveAs(this, { cPath: oRetn.cPath, cFS:oRetn.cFS });
     catch(e) {
          console.println("Save not allowed, perhaps readonly.");
catch(e) {
console.println("User cancelled Save As dialog box");
Good Luck!

How can i get value when the field name is user's defined

Hi,
I have a one java method:
public ResultSet countUserDb(String id) {
ResultSet rs = null;
con = dbcon.connect();
String queryString = ("select count as count from
db_allocation where user_id='"+id+"'");
Statement stmt = con.createStatement();
rs = stmt.executeQuery(queryString);
When i call it in a jsp file.
ResultSet counter =db.countUserDb(request.getParameter("id"));
if(counter.next())
int x=rs.getInt("count");
Tomcat said incorrect column name.How can i get the result set when the field name is user's defined.
Best regards
Ricky

You should give the user defined name in the ResultSet.getXXX method to retrieve the column value.
Example
SQL:
Select ename as employeename from emp;
You should say :
ResultSet.getString("employeename"); to get the value.
Alternatively you can retrieve it using column number:
ResultSet.getString(1);
Chandar

Setting Dynamic values to the payload-name / Content Desc

Similar Messages

Maybe you are looking for