Setting Inspection Type value automatically during material creation

Hi Experts,
I want to set the Inspection Type field ( MM01/MM02->Quality view ->inspection set up ) value depending upon plant .
Lets say for plant 0100 Inspection Type- GR100
for plant 0110 Inspection Type - GR110
Can this be done through SPRO or if we need to implement it through User exits/ badi .
Thanks in advance

Hi,
I guess defaulting is not possible. Copy the existing material and create a new one so that the inspection type is also copied.
Check the link
http://forums.sdn.sap.com/thread.jspa?messageID=9803039#9803039
Regards
Ayyallas
Edited by: ayyallas on Feb 22, 2012 12:51 PM

Similar Messages

Material Type during Material Creation

Hi all:
For creating Raw Material or Finished Product from MMR1 and MMF1, there is no need to select material type, . I have created Material Type for e.g Gold, Silver, Color Stone, even i have to create Gold, Silver and Color Stone material without selecting material type.
Could anyone help me with this.
Regards.
Shegar.

Hi,
I guess defaulting is not possible. Copy the existing material and create a new one so that the inspection type is also copied.
Check the link
http://forums.sdn.sap.com/thread.jspa?messageID=9803039#9803039
Regards
Ayyallas
Edited by: ayyallas on Feb 22, 2012 12:51 PM

A filter value for Query is set with some value automatically

Hello SAP sourcing Guru!
I created a query which has several filters.
Some of Filter's type is VLV.
When I preview the query somehow the filter values are already set with some value even though I did not set the default value.
For example, filter name is Region and there are four regions: Asia, NA, Europe, and SA.
I want to select one of them from drop-down menu. But Asia was already selected when I clicked the preview button for the query. I want to see "Please Select" instead of Asia from drop-down menu. I did not select "Prefill value from cache" for the filter. I made the filter Optional only. I did not set Default Value either for the filter.
Any clues?
Thank you for your response in advance.

Hi,
In the Default value field of the filter prompts, you need to mention the Class Reference ID of the corresponding field. E.g., if you have Contract document phase as a filter, then in that if you want to display a blank or none value, then you should use null:2016.
Similarly for vlv type, the system has a value 616. Hence if you want to display a None value insteead of Asia, use the following in the Default value field:
0:616:null.
The way to find the class reference ID is to goto the RG > Class Reference > Look for the field that you are attempting to default on.
Hope this helps,
Vikram

Activating two or more inspection types to a raw material

Hi Gurus
In this scenario how these three inspection types will work.
Scenario:
For a raw material i am assigning three inspection types 01(Goods Receipt Inspection For Purchase Order),02(Goods Issuse Inspection Inspection) and 08(Stock Transfer Inspection) and i am activating the three inspection types. So, i want to know who these inspection types will trigger.
When i was trying 01 is working and after that when i was issuing material to production material is not going to quality stock. So, Please can you brief me how inspection types will trigger one after one.
Thanks in advance
Regards
SURESH.M

Hello Suresh,
There is some special rules when using this inspection type 01.
You can find these rules here:
http://help.sap.com/erp2005_ehp_06/helpdata/en/2d/351a26448c11d189420000e829fbbd/content.htm?frameset=/en/be/00bbd8ca5311d2961800a0c930e04c/frameset.htm&current_toc=/en/89/9bb43418e43b4ae10000009b38f83b/plain.htm&node_id=9
BR,
Natália

Error during material creation

Dear Experts ,
I am trying to create a material with KMAT material type & a particular industry sector .
but i am getting a message " Operation not possible (e.g. incorrect material type or plant)"
Message no. M3327
Diagnosis
It is not possible to access the user department required because not all of the maintenance statuses have been entered for the plant in Customizing, and/or for the material type. For example, if the maintenance status D (material requirements planning) is missing for a plant, all MRP screens are deactivated for this plant.
Procedure
Check the setting for the field Maintenance status in Customizing for the Material Master in Define reference for plant-specific field + screen selection. You can display the meaning of the maintenance statuses by displaying the possible entries.
How do i go about it ??
Regards
Anis

Dear,
If the required views are not maintained this message will appear.
Check the details in the Transaction: OMS2.
Select the relevant Views and save, then only you can proceed further with the Material Master.
It may be possible that some one must have deactivated the SAP Standard VIews selection in OMS2.
Also check with transactions: OMSA, OMS3, OMS9 & OMSR.
Regards,
Syed Hussain.

Line Graph - set useful baseline value automatically

Hi all,
for a line graph in reports I've set the axisMinAutoScaled-property of the Y1Axis-element to "false" and expect that reports find out a useful value for the baseline at its own. Unfortunately the value of the baseline is always set to 0 whether a range of 1.000 to 10.000 or a range of 1 to 10 is selected.
Do you know a way to set the value of the baseline depending on the displayed values.
Thanks in advance.
Martin
Edited by: user11939409 on 14.06.2011 08:43

Hi Sreehari,
I tried to set the y-axis scale for line chart by using code. But its showing the default value, not displaying the value what i gave. Adding my code for reference.
   var axis = new sap.viz.ui5.types.Axis().setScale(
       new sap.viz.ui5.types.Axis_scale().setMinValue(20.0).setMaxValue(100.0).setFixedRange(true));
          column = new sap.viz.ui5.Line({
            width : "100%",
            height : "400px",
            legendGroup: legendPosition,
            plotArea : {
            colorPalette : ['#F67A7A','#FEE00A','#B6C359'],
            title : {
              visible : false,
              text : ''
            xAxis:{
            title:{visible:false} ,
            yAxis : axis ,
            dataset : dataset

What is the material type for Online/IT material creation?

Hi
Can any one tell me what is the standard material type and Item category groups used for creating an online/IT/software product material which is sold online [eg. online information sold over portals, portal subscriptions etc]?
What are the uncharacteristic of such a material in standard system?
Regards
Sanjay

hi
these lins might be help ful to you:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9e60be90-0201-0010-49b0-f57cfeeb5530
http://help.sap.com/saphelp_crm40/helpdata/en/f8/9d7c3e8a5cd064e10000000a114084/frameset.htm
hope this clears your issue beacuse these lins provide you plenty of information.
regards
balajia

Add new item automatically during delivery creation(tcode: VL01N)

Hi
Business requirement: Sales Order has material X. when delivery is created, system should add material Yautomatically in delivery.
Example:
Sales Order:
Item 10 Material X
Delivery:
Item 10 Material X
Item 20 Material Y
We are using 4.6C. We have tried to use Delivery Save Exits, but could not succeed.
Please provide inputs.
Regards
Uma

Hi,
I think, since you are creating the delivery with reference to Order, you cannot add line items which are not present in the Order. You should add the line item in order using the configuration, which can be copied to delivery automatically.
Regards
Vinod

Number range skip problem during material creation

Hi MM expert,
When we are creating material, its number is skipping by interval of 10.
kindly tell the solution.
Regards,
Santosh

Hi,
Please check which number range assigned to the Materiial type you are creating at sprologistics generalmaterial masterbasic settings-material type .and for the number range at the transaction code MMNR .
Regards,

How to delete inspection type assigned in material on mass level

Hi Team,
How to delete inspection type assigned in material on mass level. This inspection type is assigned in material master with indicator set as"Task List", however we are using "material specification". This inspection type is assigned to material type using t-code QA08.
I can deactivate this inspection type using QA08, but I want to delete this record from material master first. So that it would adopt my config. next time when I will assign again insp.type in QA08. I have set this indicator in config. of insp. type as default to "material specification".
Pls suggest me solution to delete this insp. type record from material master.
Thanks

hi
if Material speciiication and task lists are checked -- then no need to do anything,
but only task list checked and u want to do based on mat.spec -- then you need to deactivate and reassign same inspection type using QA08.
no other way, ensure ur stocks are not in QI
thanks
Sami

Mass creation of Inspection types

Dear QM gurus
How to create the inspection types in mass processing?
For example I have to assigne inspection type 05 for 100(with activation of Inspection Type indicator) materials (the material masters are already created )
is there any method?Without using BDC or LSMW can i do it by MASS or MM17?
Thanks
MK

There is std T code available for activation of Inspection type in SAP-QM
Use T code QA08
Enter Material & plant and Inspection type with mass processing.
Regards
Sujit

During Material master creation

hi friends,
in my system during material creation system will through the material number,
my doubt is, i entered into material master and system thrown the number too but half way i exit that transaction with out saving the material, for my next transaction of material master system through the next number why
and whenever i entered into mmo1 view screen system counted and throw a material number why and how can i delete the numbers
thanks
ganesh

hi,
>
Can flag for deletion from
Logistics --> Materials management --> Material master -->Other --> Archiving --> Material.
>
Can see these Deleted numbers in SARA tables or DB15..
>
You can see all normal material numbers in MARA...IN SE16 Tcode...
Regards
Priyanka.P
AWARD IF HELPFULL

Update inspection type in material master

Dear Experts,
Can anybody please tell me how I can activate inspection type 09 in all material master for all plant in one shot.
And how I can extend material to another plant in one shot. e.g We have 450 material created for plant 1000 & now we want to extend all that material for plant 1200.
Regards,
Raja

Can anybody please tell me how I can activate inspection type 09 in all material master for all plant in one shot.
use QA08, which is spcific designed as mass maintenance transaction for this purpose
Edited by: Jürgen L. on Aug 2, 2010 11:26 AM

Inspection Type for Material

Hi
I want to know wt are all Inspection types are created for Material...
Can any body help me wt is the Table name to get Inspection type Details?
Regards
Smitha

check this Link: [Link|http://forum.saptechies.com/viewtopic.php?t=1973]

Inspection lot for inspection type 08

Hi Eperts,
Please tell me following:
Inspection lot does not create when transfer material from plant to plant.
Created STO PO in plant 1000. Issueing plant is 2000.
MMR maintained in both plant with inspection type 01,08 activated in both plant.
As per me system should create inspection lot after GRN takes place against STO PO in plant 1000.
What could be problem.
Regards,
Raja

Hi Raja,
In your previous posts you referred to performing a 101 movement to try get an inspection lot of type 08, this is incorrect.
For movement type 101 you need to activate inspection type 01 and place a block on the q-info record against the vendor in order to get an inspection lot of type 01.
In your scenario, you are wanting an inspection lot of type 08. This is an internal stock movement and wont work with a 101 movement as this is for incoming stock. You should activate inspection type 08 on the material master and use a movement type such as the 322 to move stock to quality inspection. This will create an automatic inspection lot of type 08 as long as you have set QM not active = ' ' for mvt type 322 under SPRO -> Quality Management -> Quality Inspection -> Inspection Lot Creation -> Inspection for goods movements -> deactivate quality inspection for a movement type.
Regards,
Roderick

Setting Inspection Type value automatically during material creation

Similar Messages

Maybe you are looking for