Setting up key combination trapping to kill X server?

How can I trap a key combination (ctrl+alt+backspace) in order to kill the X-server with these?

Actually, I may have marked this as answered too quickly...
So I followed the guide at the back of the getting started manual, and set everything up as follows:
- PCI ethernet card is set up as the connection to the outside world. It is plugged into a switch which connects to a wall jack. In Network under System Preferences, it is set up as the first internet conection to try. It has a static IP address, and is set up to use the organization's DNS servers. It is NOT plugged into the upstream port, but is instead in port #9. The light on the router is on.
- Built-in wireless is set up to be the internal connection. It is plugged into the upstream slot on anouther switch. It has a static IP address, and is set up to use the organization's DNS servers. The light on the router is on, so it appears there is a connection.
- A different computer is plugged into the second switch, which a static IP address and to use the organization's DNS servers.
So basically, unlike in the scenario in the manual, I am not using the OS X Server for DNS, DHCP or NAT services. That should, if anything, simplify it.
The firewall service is started, and is set to allow all traffic in and out, no problems. Nice and simple to start.
The server has an okay connection to the outside world via the PCI ethernet card. I can ping other machines and load web pages. I cannot, however, access the machine connected to the router which is connected to the built-in ethernet. Likewise, that machine has no access to either the OS X Server or the outsideworld.
How does OS X Server decide which ethernet card is to be connected to the outside world, and which is for the internal firewall? Is the confusion possible because I'm connected to two routers?

Similar Messages

Is there a way to create a custom shortcut key to paste my email address? I would like to be able to press a key combination that will paste whatever I set it to, i.e. my email address.

Is there a way to create a custom shortcut key to paste my email address? I would like to be able to press a key combination that will paste whatever I set it to, i.e. my email address.

There are multiple ways to do similar things. One, built into the system, is to use text replacement. See:
http://www.tuaw.com/2009/12/31/mac-101-making-text-replacement-work/
There are other programs you can buy that can do the job in different ways, such as TextExpander. You could also just create a clipping file by dragging your e-mail address to somewhere like the desktop, and then you can simply drag that file to wherever you like to insert your e-mail address there.

Change the font color of a text field in a table by key-combination

I want to change the font color of a text field in a table (single cell only) on pressing a key combination. Does anybody know how to do this.
I have a lot of data in a table. During an evaluation of the data in a meeting I want to change the color of the text depending on the result of the meeting. (for example: High risk = CTRL+R makes the text red).
I know how to change the color using a button, but I do not want to add a button after each cell. For this reason I would like to do it on a key combination that alway refers to the active cell.
Many thanks for your help in advance.
Marcel

Hi,
I don't think you can use the ctrl key like that as those shortcuts will be intercepted by Reader (ctrl-R toggles the ruler display on / off). You also might have trouble updating the color while you still have focus on it. You can use the shift key in a similar way, so if you only have lower case characters in the text fields then you can do something like;
if (xfa.event.shift)
    switch (xfa.event.change)
        case "R":
            this.fontColor = "255,0,0";
            break;
        case "O":
            this.fontColor = "255,102,0";
            break;
        case "G":
            this.fontColor = "0,255,0";
            break;
    xfa.event.change = ""; // ignore character
If you need uppercase characters maybe you can have one button to set "review mode" and test that on the if (xfa.event.shift) line. But again it wont take effect until you have tabbed out of the field.
Regards
Bruce

Key combination Ctrl-Home Ctrl-End not working.

vim has a default binding for <Ctrl-Home> goes to the beginning of the file and <Ctrl-End> for the end.
However, I couldn't get these key combinations to work for me. And I've consulted the #vim channel on freenode.
They said it maybe a problem that the terminal I'm using caught the key and didn't send it to vim, but I find this conjecture hard to believe, because I've since been testing several terminals including xfce's default, roxterm, tilda, lxterminal, lilyterm ... and none of them working.
Later when I reboot I found that, even under the pure console (tty), the combination still doesn't work !
So this must be a problem from the original key mapping itself, and not latter stuffs like xfce, terminals and editors etc...
can anyone help me fix this ? I've also seen the wiki articles but unfortunately they aren't very helpful.

The <C-{Home,End,Left,Right}> key combinations work in Xterm, but not in urxvt. All of the terminals that I recognize mentioned above are all VTE based terminals. This thread here:
https://bugs.launchpad.net/ubuntu/+sour … +bug/89660
is showing a lot of people with gnome-terminal, also VTE based, as not working either. It's definitely a terminal issue.
The following page explains how to get Vim to recognize key combos that are usually trapped or unmapped by the terminal:
http://vim.wikia.com/wiki/Mapping_fast_ … rminal_Vim

Can't set WEP key for broadcom-wl?

I did a fresh install of Arch this morning at my office. I have an Acer Aspire laptop with a Broadcom wireless card that works with broadcom-wl (I've used the driver for a long time and it works perfectly... with open or WPA networks). The network at my office is WEP. So after installing the drive, adding lib80211 and wl to my MODPROBE (and !b43 !ssb), I reboot and see my wireless as eth0.
If I try to iwconfig eth0 key XXXX-XXXX-XX or iwconfig eth0 essid WIFINAME key XXXX-XXXX-XX, no matter what combination I try, I get an error saying that it's an invalid argument for SET_ENCODE. I've check the Wiki and man pages for iwconfig, and can't seem to find any solution. Does anyone know why I can't put in a WEP key?
((Side note: everytime I've installed Arch, my wifi starts out as eth0 until I get connected and run pacman -Syu. Then I reboot and it shows up as wlan0, and my Atheros ethernet is eth0 or eth1.))

Thanks for a response. So this is a fresh-from-the-oven install. I usually get my wifi connection set up and then create my user and go about setting everything else up. Meaning I've been trying as root.
I can see the wireless network with iwlist scan and it shows up as encryption key: on. Also, I tried using each lib80211 mod or some combination thereof in my rc.conf. No dice.
Lastly, since I didn't include it before, here's the exact error I get when I try to assign a WEP key with iwconfig:
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth0; Invalid argument.
UPDATE: I can set the key using [x] between key and XXXXXXXXXX. However, any combination I'm trying of essid and key/enc isn't showing up in iwconfig. No errors, but my iwconfig information isn't changing. It's progress... I think.
UPDATE #2: I can iwconfig eth0 essid linksys (the office next to us) and grab that one (I don't know their password ) and it updates iwconfig, but our own network doesn't update iwconfig when I run iwconfig essid. >.<
Last edited by mtcupps (2011-06-17 18:20:02)

Problem in Inv O/P Condn Rec--"Debit/Credit Key Combination not appearing"

Hi,
I have done the following settings for Inventory Mgmt:Output determination:
Print control settings as follows:
1. Defined Print items for each output type (eg. A,B,C etc.)
2. Defined Version Print Indicator = 3 (Collective Slip) for MIGO transaction
3. Maintained Print Indicator for GI/Transfer Posting Documents - here I linked print item for my
     mov.types.
   I have maintained User Parameter NDR = "X"
Output determination settings as follows:
1.Defined my output types with access seq=0003
2.Linked output types to O/p det.procedure ME0001 (requirement field blank)
3.Maintained condition records for Trans.type WA
     Here, the key combination for debit/credit indicator is not appearing for selection
     - hence I am not able to maintain condition records at the debit/credit level for transactions like
       stock transfer but I am able to maintain conditions without Debit/Credit indicator.
     - as a result, during output determination, 2 messages appear for each document item.
   I want only one output message per document item.
    I tried changing access sequence for my output type to 0004 but once I did that, no output was
    getting determined for my material documents.
    How do I solve this.
    Is there any other config to be done (for eg. requirement in Inv.Mgmt procedure)?
    Is there any other user parameter I should check out?
    Thanks & Regards
    Prabhu
Edited by: Prabhu Sundararaman on Dec 16, 2008 12:31 PM

You call do_addition with a wrong set of parameters or you use the wrong datatypes from your parameters.
Check what parameters ( and their datatypes ) that procedure expects.
Also check if you have the right privileges for using UPDATE_ERROR_MSG and that a synonym exists for it.
fa_addition_pub.do_addition
(p_api_version => 1.0,
p_init_msg_list => fnd_api.g_false,
p_commit => fnd_api.g_false,
p_validation_level => fnd_api.g_valid_level_full,
x_return_status => l_return_status,
x_msg_count => l_mesg_count,
x_msg_data => l_mesg,
p_calling_fn => 'FA_ADDITION_API', ---modify by anand
px_trans_rec => l_trans_rec,
px_dist_trans_rec => l_dist_trans_rec,
px_asset_hdr_rec => l_asset_hdr_rec,
px_asset_desc_rec => l_asset_desc_rec,
px_asset_type_rec => l_asset_type_rec,
px_asset_cat_rec => l_asset_cat_rec,
px_asset_hierarchy_rec => l_asset_hierarchy_rec,
px_asset_fin_rec => l_asset_fin_rec,
px_asset_deprn_rec => l_asset_deprn_rec,
px_asset_dist_tbl => l_asset_dist_tbl,
px_inv_tbl => l_inv_tbl,
px_inv_rate_tbl => l_inv_rate_tbl
);

How to create a new "key combination"

Hi, gurus,
I need I now key combination like "sales organiztion/distribution channel/sales office" in a conditon type. How can I set in IMG? Thanks advance.

hi
Use t-code V/03
In addtition to above reply, first check which is the last table no used. You should use table no from 501 to 999
before creating new table you can check the avilable tables.
Regards

Assign key combination to service

I got a couple of questions:
1. In keyboard preferences you can assign a shortcut to Services you made with Automator. When I assign a combination that includes the '\' key, it simply disappears, so I can't assign command+\ to my service. It worked previously, though. Why is that?
2. My Automator script is as follows:
tell application "GrowlHelperApp"
          set the allNotificationsList to ¬
                    {"Audio Output Source"}
          set the enabledNotificationsList to ¬
                    {"Audio Output Source"}
          register as application ¬
                    "Audio Output Source" all notifications allNotificationsList ¬
                    default notifications enabledNotificationsList ¬
                    icon of application "Script Editor"
          do shell script "SwitchAudioSource -n"
          do shell script "SwitchAudioSource -t system -n"
          set CURRENT to do shell script "SwitchAudioSource -c"
          if CURRENT is "iMic USB audio system" then
                    set DEVICE to "Speakers enabled"
          else
                    set DEVICE to "Headphones enabled"
          end if
          --          Send a Notification...
          notify with name ¬
                    "Audio Output Source" title ¬
                    "Audio Output Source" description ¬
                    DEVICE application name "Audio Output Source"
end tell
It doesn't really matter what the script does, but when I press the Play button in the Automator interface, it runs instantly. When I assign a shortcut and press it (I assigned opt-command-,), it takes a few secs until the script is run for the first time. Subsiquent callings to the script are fast as expected. How can I make it run fast the first time?
3. I want to assign the Caps Lock key or Eject key to execute the script. What is the simplest way possible?
If you know the answer to either question, I would be very happy to read your answer.

HI,
Key combination is your field combinatios which you select or maintain during pricing procedure, its a first step of Pricing procedure determination.
Lets say for PR00 (Price) you want to determine price with two factors.
First you will create two condition table with the Tcode V/03
Here you can have the combination as per your business need.like i said
1. You want to maintain price for customer & material this is one key field combination. Table 005
2. You also want to maintain price for customer & material & plant combination this is another key field combination.Table 006
Now the next is you will create the access sequence for Condition Type PR00 for exp. u maintain access sequence PR02
First go to V/07 & create access seq. PR02
now select PR02 & click on access here new entries & and select the condition table here which u have created in the manner system should the condition record for a condition type PR00.(Basically it checks from specific to general).Means first you will put here Table no. 006 & then 005
After this step you will select that condition table line & select field then enter it will go green means its activate now also select the Exclusive check in front of all the condition table & save it.
Now you can assign that access seq. to your contition type PR00 & accordingly you can make the condition record for your customer.
I hope it will clear your point.
revert me if face any issue.
Regards
Deepak

FV11 - Wrong key combination

Hi
I am from FICO. I have a doubt in FV11.
I created condition type ZSER and added it in pricing procedure. I defined tax code ST in FTXP. There i did not gave tax percentage
Now went FV11 for giving percentage. When i put condition type and press enter, it asks for combination key as
1. Tax Classification
2. Plant / Vendor
But when i saw it in one of my other client where tax codes were done by MM person, key combination is showed as
1. Tax Code
2. Tax Classification
Let me know why its not comming.

Set up the following Access Sequences in the the IMG under Financial Accounting -
Financial Accounting Global Settings---->Tax on Sales/Purchases -
Basic Settings -
Check Calculation Procedure -
Access Sequences:
You need to configure the access sequence for JTAX,
Search Access Sequence JTAX, Select it
Double click on Access, it will lead to new Screen
Go to New Entries , GIve the No. as 80 or that doesn't exit previously and give the table no. as 3
Similarly you can go for
¡ JST1
hope this will solve your problem. This is workbench request , if you have multiple client in the same server it will be affected to all client.
Revert if any clarification required.
Edited by: sudhansu satapathy on Apr 16, 2010 1:29 PM

How Do I Customize the Key Combination to Cycle Through Windows in Reverse in all Applications?

How do I customize the key combination to cycle through windows in reverse in all applications? I want to be able to change the global setting for Command+~ (Cmd+Shft+`) to something more desireable. I could NOT find a way to do this in Systems Preference -> Keyboard -> Keyboard Shortcuts since there is not a menu selection "Cycle Through Windows in Reverse". I then went and looked in the plists DBs of Finders resources hoping to find a setting I could override. I was quite supprised, as well as some of the MAC gurus in the office, that there was not an easier way to override cycling through windows in reverse on a MacBook - the most user friendly and accessibility aware computer on the market:)
Here is my MAC software info.
System Version: Mac OS X 10.6.7 (10J869)
Kernel Version: Darwin 10.7.0

I don't know of any way to have a separate commandkey combo for the reverse cycle function.
From the Help pages for OS X 10.6.7 ("Using global keyboard shortcuts") -
NOTE: You can create keyboard shortcuts only for exisiting menu commands.
Since the 'reverse' cycle command is not an existing menu item, creating a separate key combo for it doesn't seem possible. Apparently the 'reverse' cycle command is a fixed one, internally defined as a mod of the normal cycle command invoked by adding Shift to its key combo.
There may be a way to achieve what you want via a two-step process: write an AppleScript that will invoke the 'reverse' key-combo set, then link the activation of the AppleScript to a key combo of your choosing. Not sure if this is even possible, though - usually AppleScript activation via keyboard would be set up via an FKey.
I can understand wanting to share the RSI risk evenly between both hands, or even to unload the left hand if that is desirable. However, apparently a two-key combo can't be done for the reverse cycle function. Is a three-key combo not possible? ...meaning a two-key combo on the right (Command plus something) for normal cycling, adding Shift for reversing?
One caution about changing keyboard command combos - it's very easy to accidentally set up a conflict with a another existing commandkey set. FWIW, most, if not all, of the mnemonic and easily-reached letters are already used. In this vein, the Keyboard Shortcuts page of the Keyboard prefs pane shows such conflicts via a yellow caution triangle next to the conflictors.

X1 carbon: assign FN+ARROWS key combinations

Hello!
On my previos laptop it was very convenient to use FN+Left as Home button, FN+Right as End button, Fn+Up as PgUp, Fn+Down as PgDown.
On Lenovo X1 Carbon I feel really dissapointed to see Home/End buttons so far from arrow keys....
Is it possible to set Fn+arrows key combinations on X1 Carbon the way I mentioned above?
Thank you!

Hi Vlad1024,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you feel uncomfortable accessing Home/end buttons in your Lenovo X1 carbon.
To remap the keys according to your desired layout, you can try using Microsoft Keyboard Layout Creator.
Lenovo doesn’t provide any tools which can help you to remap the keys. There are certain third party applications like autohotkey and sharpkeys which may serve your purpose.
Hope this helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Is there a "fine" move key combination for precision placement?

As I'm trying to arrange objects in the document, when I press the up/down keys to move them precisely, they move at an arbitrary large step.
Now, if I press the shift key while I move them, that step is further increased (like the previous was too small...).
So, is there any other key combination that reduces that step and makes it finer for a more precise placement as in other applications?

I do not know. I am also missing this option.
Adobe Help:
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-6426a .html#WS714a382cdf7d304e7e07d0100196cbc5f-6421a
You can also use the grid lines:
http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-631da .html#WS714a382cdf7d304e7e07d0100196cbc5f-631aa
Config grid:
cmd + K > Guides & Grids
and:
show grid: CMD + '
Snap to grid: shitf + cmd + '
P.S.
Besides Illustrator 17.1 seems to have a problem with a precise setting and attracting obiektwó to mesh.
I can not set the center prostąkata x: 0 y: 0 px. ?!

Re: Using Alt-Key combinations

Unfortunately this happens not only with Alt-Key combinations. It also
happens with the ordinary F10 key: Windows activates the menu and then
Forte gets the FKey event. The problem is that now the user has to press
ESC to deactivate the menu and continue normal processing. There is no
known cure yet...
Tony Elmore wrote:
>
We are attempting to use Alt-Key combinations for a shortcut key combination
for push buttons using the SetAsFunctionKey method and FunctionKeyPress
event. When we press the Alt-Key combination, it appears that Windows is
trying to find a menu item with that shortcut combination or a button with
that combination. Since Windows can not find the proper element with that
combination, it beeps at us. At that point, Forte picks up the key
combination and will post the FunctionKeyPress event.
The application will work fine, but the beep is not only annoying, but also
is misleading for those individuals using accessibility tools like screen
readers who rely upon audible queues for detecting errors in keyboarding.
Has anyone found any viable solutions to this problem?--
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

petelewis wrote:
Mr.Elendig wrote:it returns ^[a as it should.
Ah ha - okay. So you're using escapes too, rather than meta8 (this is the default, so makes sense). Yeah, I got it working doing that, but had to adapt my .vimrc to get it to acknowledge the ^[ as "alt". Didn't you, or did a simple map of e.g. <A-a> suffice?
Are you running it in screen/tmux btw? and what is your TERM set to?
Yeah, I thought that too and though I do run it in tmux usually, I've been testing it both with and without (TERM is set to screen-256color BTW) and it made no difference. Still, unless I specifically map the ^[ to alt in vim, it doesn't work. With meta8 it works so long as the locale is not UTF-8.
Guess I've got a workaround for now, but it would be nice if meta8 and utf-8 worked nicely together.
Thanks.
Could you please show how your vimrc looks like? I have the same problem and I'm interested in your workaround.

Key combination to render frame content as pdf

I am not able to print my bank statement, which is presented on the Internet as a paginated document in a frame. The "print" link get me onyl the portion in the frame (less than a page). In Lion I was able to 2-finger tap the content and get the whole doc. Now the best I can get is the frame content that is showing. While trying various key combinations, I got a new window to appear with a pdf version of the entire document - I was able to print it. But I cannot discover what combination of keys I used. Can anyone tell me how to pop up a pdf verison of the doc so that I can print it the next time I need it? I have given up on trying to get any browser to just print it straight off. I am using Chrome, but I have also tried Safari and Firefox. I am on OS 10.9.2. Thanks.

Hi Prashant,
Do your forms change so frequently that you need real-time access to the FOR ???
One of the major issues I see with that kind of setup is ensuring that the calling web service gets the correct version of the form.
Say you have form 123 456 (2010-01) Documaker version 1, revision 10, that has been published and 123 456 (2012-06) Documaker version 2.1, not published, and a work-in-process. Unless you build a complete parallel forms management system, chances are you would often get the wrong version of a form.
Distributing a form in a "work-in-process" state is never good, but try to imagine the panic if, by mistake, a future version of a form, drastically reducing the coverage, is leaked.
You could probably build the search features on a set of folders containing the PDF version of approved, published forms. That's the kind of setup we have in place.

Any Alt + Shft key combination freezes Photoshop CS4

Any key combination that also involves simultaneously pressing the alt and shft keys freezes Photoshop CS4 on my WinXP laptop. Is this a known bug or peculiar to my system? Killing all unnecessary processes running in the background doesn't help, so it doesn't seem to be a software conflict. Other than remapping all the relevant shortcut keys is there anyway to solve this problem?
And how would I go about remapping the ctrl + shf + alt + e key combo. I've looked for it in under Edit\Keyboard Shortcuts\Layer but can't seem to locate it.
Thanks.

Thanks for the tip Chris. Yes, it seems to be a software conflict after all. Running Photoshop in Safe Mode (something that should have occcured to me earlier), the alt - shft problem disappears. Now it's just a matter of trying to isolate the culprit. Once I've found it, I'll post the solution.

Setting up key combination trapping to kill X server?

Similar Messages

Maybe you are looking for