Setting up SRM user

Hi all,
The user name and password have been created in the usual way for a SRM user, however when logging on and he clicks on 'shop', an error occurs. (not quiet sure how to attach error screens to these forums) . Error basically says,' Attribute for user X contains errors. Inform sys adm.'
The Org Structure has been checked, and is ok. I came across a reference mentioning " no Business ID assigned to the user", but I'm not sure what this means.
Thanks for anyones help.

Hi
<u>Your user must be integrated in SRM organizational structure.
To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check".
This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.</u>
Try to repair the user using USERS_GEN, click on delete users acct. and employee, select the user and click on "Employee assginment".
Come back to intial screen where u have copy user and employee data from template, select create users from existing SU01 and create your user required.
<b>Please see related links -></b>
Attribute for user contains errors. Inform system admin
User cannot be repaired because the organizational unit contains errors
How to define new attribute in PPOMA_BBP
bbp_mon_sc attributes
Re: TRANSACTION ERROR
Note 1089331 PPOMA_BBP:- Employee assigned with more than one postion
Note 630791 EBP 3.5/4.0: Attribute check for vendors incorrect
Note 612417 EBP 3.5: error in consistency check
Note 588574 EBP 3.5: Incorrect check for company code attribute
Note 586934 EBP3.5 :Incorrect messages during the attribute check
Note 576350 EBP3.5: Title page 'Check' in PPOMA_BBP: incorrect result
Note 554319 EBP 3.5: Attribute company code is checked incorrectly
Note 516377 EBP 3.5: BBP_ATTR_CHECK, application - language correction
Hope this will help. Do let me know.
Regards
- Atul

Similar Messages

Best Practise for managing SRM user setup

Hi ... I am looking for some best methods that you are following in your projects, in order to manage the SRM user setup.
My users are concerned about the time taken from user submitting a request for user creation or org plan setup or changes to user profile ..... to the actual work done in SRM. Lot of time and effort are spent in manage this task.
Other concern is, each user request has to be dealt individually. They are looking for some automation of the process which would process bulk requests belongs to differnet users from different departments. From my experience, one thing we can think of is generating a upload program. But I think that would also be complicated for chaning the existing profile.
Just thought of checking with you .... whether you have any process which results in less time and effort spent in managing these activities? Please share your thoughts.
Thanks,
Arun

Hi,
Different people will tell you different versions of what they believe is best practice, but in my opinion you are already doing reasonably well.
What I prefer is
1. Lock ID & set validity date.
2. Assign user to user group LEAVER or EXPIRED or something similar (helps with reporting) out of SUIM/S_BCE* reports.
3. Delete role assignment (should you need it, the role assignment will be in the change history docs anyway).
4. Check background jobs & act accordingly.
For ease of getting info I prefer not to delete the ID though plenty of people do.

Unable to replicate SRM users in SAP Portal

Dear All,
We've followed the below link to auto replicate the SRM Users in SAP Portal:
http://help.sap.com/saphelp_srm70/helpdata/en/08/bae789ee8743d5b4cb2fbf93a9831b/content.htm?frameset=/en/08/bae789ee8743d5b4cb2fbf93a9831b/frameset.htm
But after doing all the configuration steps, we are yet not able to replicate the SRM users in Portal.
SPML Destination Connection test is successful and all other configurations are done and cross checked.
Is there any report program that we have to run / schedule for the user replication.
Please suggest.
Regards,
Anurag

Dear Carl,
The above link that you've shared talks about replicating user accounts from UME to the SAP System.
However in our scenario, we want the replication from SAP system to UME. So, it's a reverse scenario.
The link that I've shared above in my thread talks about my scenario and in fact we've done all the configuration steps also.
But it is not working at the moment and I believe that there must be some additional setting / trigger point that would initiate the replication.
If somebody has already come across such scenario, please advice.
Regards,
Anurag Gwari

I want to set up a user account for my 3 year old, so when she goes into her account, only her games show up on the desktop

I am trying to set up a user account for my 3 year old so that when she goes into her account, only her games show up on her desktop. How??

yes -- I think I am setting it up right, but when I go into her account to check it, it doesn't work.

How do I set up multiple users with different configurations

I have a Mac Pro that is shared by multiple users. Some edit using Avid Media Composer 6.0, and some edit using Final Cut Pro 7. Our client monitor is connected using a Matrox MX02 Mini. When I install the latest drivers for the Matrox MX02, I can use the client monitor with Media Composer, but not Final Cut Pro 7. When I back-rev the drivers to support Final Cut Pro 7, I can't use the MX02 in Media Composer.
Is there a way to set up two users -- one for Avid editing and one for Final Cut editing -- that will each load different sets of drivers?
Thanks!

Not in one boot system. The only way I can think of doing what you want is to dual-boot - ie, either partition a single drive with two volumes, one for each configuration, or, if you can, use separate physical drives. The Matrox drivers are loaded at the system level, not the user level.
If you have a spare drive, you would just clone your system across using Carbon Copy Cloner / SuperDuper, then boot to the second system and adjust the drivers as necessary.
Matt

Problems Setting Up Developer Users

I am having a problem setting up developer users and I am trying to determine if I am missing a step or if there is a configuration problem on my staging and production systems.
What I want to do should be very simple. I want to create a user that can create an application and see the information under the "Application" tab in the Navigator.
I have created the user using the following steps on 3.0.9.82 for Unix:
1. Create the user
2. Make the user a full administrator (rather than end user)
3. Make the user a member of the portal_developers group
4. Make the user's default group the portal_developers group
However, when I do this the user does not see the information under the
"Application" tab. The only way I can get the user to see the info under the
"Application" tab is to make him a member of the Portal_administrators
and/or DBA group. Both my staging and production boxes have the same result.
Does anyone have any thoughts or suggestions on what might be happening?

Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls

How to Set up the User POV in Web Analysis report

Hi , I am new to create the Hyperion Web Analysis report.
I am trying to set up the user POV. I have followed the document and did the below steps.
1. I went to User preference -> OLAP Server -->checked the BOX "Save Filters only for POV".
2. selected the layout and in options checked the Use user POV.
after that I have opened the report in HTML. nothing got prompted.
When I opened the Financial report, It will prompt user to select the year, period, entity, etc... I need the same way in Web Analysis also.
I have selected Accounts in rows, Entity, Year, Period in columns , rest all i kept in Filters.
Could some one please help me how user can get prompted to select the members from dimensions.
Thanks

What you have in Webanalysis is POV and PV
Applying Point of View (POV)
Selecting Personal Variables
You can also look at Oracle - Hyperion Labs......: WebAnalysis - how to show the current user's report when he logs in to see how PV can be leveraged.
There is no prompt option in WebAnalysis
Regards
Celvin
http://www.orahyplabs.com

Setting up multiple users

Does Yosemite offer any new options for setting up multiple users on one computer akin to family sharing with separate ID's for each user?
Thanks.

Sure, just create user accounts for each user on the Mac. (System Preferences>Users and Groups)

Can you set up multiple user accounts on one laptop?

can you set up multiple user accounts on one laptop?

Of course.
And instructions can depend on which OS X is installed.
For v10.7 Lion > OS X Lion: Create a new user account
For v10.8 Mountain Lion > OS X Mountain Lion: Create a new user account
When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 

HT4796 I used migration to transfer iTunes from pc to mac book. It had me set up another user account. Now i have 2 user accounts and i have the iTunes on the wrong one. How do i get the iTunes on the original account.

I used migration to transfer iTunes from pc to mac book. It had me set up another user account. Now i have 2 user accounts and i have the iTunes on the wrong one. How do i get the iTunes on the original account.

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

How do i get my library back after setting up seperate users in vista

Hello all. After much frustration, I have decided to turn to my piers for help. (I tried to go thru apple support but they wanted to charge me) I have three devices that sync to my computer - my iphone, and two itouch's that belong to my daughers. I decided that it would be a great idea to set up seperate user accounts on my computer so that our information wouldn't get messed up i.e. my contacts and calendar appointments end up on my daughers ipod. (The one ipod was mine that i gave my daughter when i got my iphone so it was still trying to sync with my stuff even though i erased it and synced to her library. whole other story.) They have each had their own library that we switch when we sync. When i set up the seperate user accounts their libraries disappeared! I have tried moving the .itl file and the .xml file to the public folder (and many other locations) and changing itunes media location in itunes but i get nothing. When i try to just click and open those files, they come up empty. where did it all go? Could it be because this is a first generation itouch running iOS 3.1.3? I have not tried my other daughters new ipod because she would freak if i messed up all her stuff. I have not been able to sync their devices since I created the seperate user accounts because I'm afraid they will lose everything. I apologize because i know just enough to be dangerous and i hope i have not messed things up totally. Is there any hope that i will be able to retrieve their libraries - wherever they went? thank you in advance for you help and patience.

This is one of the many reasons that always maintaining a backup copy is basic.
Use your backup copy to put everything back.
If for some reason you have failed to do so ( not good), then you can transfer itunes purchases from an ipod:
File>Transfer Purchases
When you buy from itunes you get one download only. it is your responsibility to backup your music, and all other info/data/pics/docs/etc.

I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show up. How do I prevent this?

I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show and open up. How do I prevent this?

Log in to your account, and move all your files to your home folder. No other users should be able to access them there and they won't show up with a Spotlight search.
Make sure your kids' account(s) do not have admin privileges.

How can i set up multiple user accounts for my new ipad mini?

How can i set up multiple user accounts for my new ipad mini?

The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

How do i set the proxy user in FF 3.6.13, this entry was existing earlier its gone now. using IE with entries in user account pwds works while FF doesn't.

How do i set the proxy user in FF 3.6.13.
previous versions had an entry for proxy user.
its gone now.
using IE with entries in user account pwds works while FF doesn't.
too bad have to change back to IE :-(

You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]]

How do we set up multiple users?

how do we set up multiple users?

Create separate user accounts for each use. Use Accounts preferences or Users & Groups preferences depending on which version of OS X you are using.

Setting up SRM user

Similar Messages

Maybe you are looking for