Settling investment internal orders to an asset (AA310 msg)

hi.
I am wondering if somebody can shed some light for me on the following:
let's say we have 2 investment internal orders (representing 2 different projects) which are to be settled to one asset.
for the 1st order the job was done and the status changed to TECO in 2010. Upon full settlement (KO8G, full ) the cost has been settled to an asset (from AuC) and the asset has been capitalized. the capitalization (aquisition) date was set to the end of the period (e.g. Dec 31, 2010).
the status of the 2nd order has been changed to TECO in 2011. Currently when I'm trying to do a full settlement of the 2nd IO (with KO8G, partial capilazation) I'm getting AA310 (asset value date in diff year) as far as the system is trying to default the asset value date to date when the IO status was chagned to TECO (2011).  I do not want to default the asset value date on the KOG8 screen.
The question - what is wrong in my approach and what should I do in the case I have a second investment orders to settle to a final asset.
Sorry if I was not clear, i'm primarly an abaper but trying to understand some business processes related to internal orders and settlement. any information to understand this relationship would be appreciated.
thank you,
viktor

Creation of Internal Order- KO01
Maintain Settlement receiver as the AUC asset
Settle the Internal Order- KO88
Now the values have come to AUC asset
Distribution of AUC- AIAB
Enter the Settlement receiver as the Main Asset
Settlement of AUC- AIBU

Similar Messages

  • Settlement of Internal order to Asset under construction (AUC)

    Hi,
    To All
    While settling an internal order to AUC through KO88 it shows already settled whereas the balance of the internal remains the same and while settling AUC the error shows "there is no line item".
    What can be the problem, why internal order is not settling to AUC?
    Has anybody face this issue before? I have spent hell of the time on this issue but haven't resolved this. I would greatly appreciate your response on this.
    Thanks
    Jainendra

    Hi Jainendra,
    Please refer OSS Notes# 310116 (Settlement AuC: Open items not correctly cleared )
    OSS Notes# 412869   (AuC settlement: AW521 or line item not settled )
    Have a look into the below link,
    http://help.sap.com/saphelp_47x200/helpdata/en/4f/71daf9448011d189f00000e81ddfac/frameset.htm
    Also refer the below SDN link:
    Re: Capitalization of Asset
    Hope this helps.
    Please assign points as a way to say thanks
    Message was edited by: Ravi Rana

  • Line Item settlement of Internal Order through Investment Measure

    Dear friends
    Can we do the line item settlement of Internal order. The Internal order is created through IO as Investment Measure.
    Thank You

    Hi,
    Yes. It is possible to have line item settlement for Investment Internal Order.
    Trust this helps much!
    Cheers!

  • Stock against investment internal order - reg

    Hello,
    Our client wants to use  investment internal order functionality (AUC---> FIXED ASSET). 
    I have few queries regarding this functionality:
    a) Can we  keep a stock of the material we are going to procure for capitalization.
    b) how we could maintain stock of the procured but not yet issued.
    Early response is greatly appreciated.
    Kapoor

    When you want to do this you need to use PS.  An other option is to create a PM order for this and settle the costs to your investment internal order

  • Error in Settlement: "Reversal of settlements on Internal Order's"

    Hi All,
    Please help me with the below issue which is as follows:
    "In October I did two settlements in error on internal
    Orders A & B. This refers to assets X &
    Y in co code XX".
    "I need to reverse these settlements in November, I assume
    I use KO88, but am concerned amount the FI posting".
    I want to know what sort of analysis is to be done and precuation to be taken before reversing the settlements.  Please help me this..
    Thanks a ton in advance.
    Regards,
    Vinay

    hi swatha.
      for settlement of internal orders/PM orders KO88/KO8G is run but before execution you shoud see the following step as period end activity:
      1.. calculate activity price (KSII)
      2. Revaluation of actual price KON1/KON2
      kkumar

  • PM order settlement to Internal order

    Hi,
    I have a requirement to create work order without any refrence objects.During Teco ,System asks for the settlement rule.
    Can PM Work Order be settled to internal orders?
    Regards
    Anil Kumar
    Edited by: Anil Kumar on May 11, 2010 8:18 AM

    You will not be able to have the same number as the internal order as they are stored in the same table (AUFK)
    PM/CS order are category 30 and internal orders are category 01 (AUFK-AUTYP)
    PeteA

  • Problems with Trading partner when settling an internal order

    Hi experts,
    We are trying to settle an internal order to a G/L account. For this account there is a validation defined, which states error when the trading partner is not entered. Hovewer we cannot change or cancel the validation for business reasons. We cannot use a different G/L account for settlement neither.
    Is there any chance to add the trading partner in the order settlement rule? Any other ideas?
    Thank you,
    Michal

    Since you cannot disable the validation and cannot use any other GL account, use a substitution as Sridhar suggested. I am adding to this that trading partner is either assigned at header level or line item level. In this case since it is internal order settlement, I guess it has to be at the header level since it is not cross company. For cross company, the trading partner is automatically filled in so rule that out.
    That leaves us with the option of substituting TP at the header level. You can use settlement document type as a condition to bring in a trading partner.
    In the worst case if the validation is coming before the substitution kicks in, consider modifying the validation to put exclusions for settlement process, say, use business transaction for example.
    Regards
    Sharabh

  • Error while settling Internal Order to CWIP asset using T-cdoe KO88

    Hi experts,
    While settling the amount from Internal Order to particular CWIP asset, i am getting the following error
    "Define a number range for settlement documents"
    Kindly provide me the solutions how to go about it.
    Thanks in advance
    Bashyam

    Hi,
    Go to T.Code KANK
    Click on "Maintain Groups" (F6)
    Assign a suitable number range to object KOAO
    Regards,
    Kenneth

  • Settlement from internal order to asset under construction

    HI All,
    I have allocated some labors hours cost from production cost centers to real order which is created for allocating the internal cost to asset under construction.
    when i allocate the labor hours by using the "KB21N" it has used the secondary cost element that is "Internal activity allocation" cost element "1200002".
    i have given the source cost element "1200002" which is created as "internal activity allocation" and in settlement cost elements folder i have given receiving category is "FXA" and selected by cost element check box. i selected required entry field in settlement profile and assigned in order type.
    when i do the settlement to asset under construction from internal order it is showing bellow errow.
    "Settlement by cost element not possible due to secondary cost element
    Message no. KD553
    Diagnosis
    You want to settle the secondary cost element 1200002 by cost element to an asset or G/L account, which is not allowed.
    Procedure
    Extend your allocation structure R3, so that secondary cost elements are not settled by cost element, but with a settlement cost element."
    please let me know the problem and where i did mistake. give me the solution
    thanks in advance
    Mr.Rao

    HI,
    in your allocation structure R3 you entered in the view "Settlement cost element" that settlement receiver categoy FXA receives values "by cost element". This is only possible for primary cost elements. For internal activities do not tick "by cost element" but use a settlement cost element with cost element category "22".
    best regards, Christian

  • Reverse Asset AUC settlement with Internal order

    Hi Experts,
    User wrongly assigned Asset Internal Order to Expense GL Code, therefore we would like to reverse all the AUC settlement pertaining to that Internal Order. When we execute KO88, reversal its appearing one of the settlement.
    Please advise what are steps required to do complete reverse for all settlement with pertaining to that Internal Order and Asset.
    Thanks
    Srinu

    Hi:
        Can you please check AIST for reversal..
        Regards

  • Internal Order for AUC Asset not getting created Automatically

    As per SAP Standard , when I create an  AUC Internal Order (KO01), and save , AUC asset is gets created automatically ted via AS01 and stores the AUC Asset in Internal Order settlement rule. 
    However when tried with the client Im not able to create, AUC is not getting automatically created and stored in Int Order Settlement rule.
    In config I have added investment profile to Ord Type  and in OAOA ( AUC Asset class setting , Investment profile is also checked)
    Kindly let me have your inputs to fix the issue
    Advance Thanks
    Sanjai

    Hi,
    In order to create AUC asset automatically by the system, you need to create an investment profile in OITA.
    Then assign this investment profile in the Internal order master data created through KO01 in the Investments tab.
    There is no option of assigning the Investment profile in the Order type.
    And in OAOA that is Asset class, select the radio button investment measure.
    You can default the Asset class of AUC in the investment profile or leave it blank so that same can be filled when system prompts for AUC creation.
    You cant see the AUC asset in the settlement rule once Investment order is created, but only after settlement of the balances to the AUC u can see.
    Thanks & Regards,
    Ravi Kumar

  • Change auc from investement internal order

    hi sap experts,
    my client has created one internal order with investment profile and assign in auc and now he wants to change the respective auc from internal order.
    for example
    They created one Internal order as 70000500 with investment profile
    earlier they have assigned auc as 5000035 and now they want to change the auc as 5000044.
    i would request to all please guide me how to change the Auc from Internal order .
    regards
    syamala

    Hi All
    I believe you cannot change the AUC in KO02 transaction once you have already settled.
    There is an option Block/Delete but it was greyed (disabled).
    Usually you create the investment order (KO01) and soonafter the AUC and they are linked forever, until the full settlement to asset.
    Well if you really need to transfer the expense from the original AUC to the other AUC you could try the Line Item Apportinment.
    1-Run KO88 to settle all expenses to original AUC.
    2-Run KO88, menu Environment - Line Item Apportinment, update settlement rule for preliminary and try.
    In my box, it was not allowed to settled for AUC, maybe for your box is configured.
    I dont know if maybe by the FI-AA side you can fix it.
    Regards

  • Internal Order Process for Assets

    Hi experts,
    Can you please provide the process from internal order to settlement for assets.
    And is the process is same for normal assets and AUC?.
    Can we change the Order Status for AUC?
    Thanks,
    Ravi.

    Dear Ravi,
    1. first create an internal order through KO01. That internal order type should be for investment purpose.
    2. Give the relevant detials and go to investment tab and give investment profile.
    3 Then in toolbar go to extras and select "asset under construction". An asset under construction would be created and give the details of this asset.
    4. Then release the internal order in KO02.
    5. Then go to GB60 and post a invoice with this internal order as account assignment object.
    6. GO to KO02 and in extras see the order balance. that amount would be reflected in the order.
    7. now go to KO88 and execute the internal order through which your internal order will be credited and AUC which you created would be debited.
    8. Now go to KO02 and see the order balance it would show 0 as it is moved to AUC.
    9. Now to go to settement rule and give the asset to which u want to transfer this amount and take the category as FXA and give the detials.
    9. now go to KO02 and change the status of internal order to "TECO complete".
    10 Now go to KO88 and execute the order and now the AUC is credited and your asset is debited.
    This is the exhaustive steps which i think wil solve your purpose.
    But make sure the configuration about the order type and investment profile are properly maintained.
    Thanks
    sap firdo

  • Error while settlement of Internal order

    Dear All
    I am getting the following error while executing KO88 "Choose transaction type and base value appropriate for asset values".
    The settlement and posting period are 12 and the processing type is "Partial Capitalization".
    Pls advice
    Rgds
    Nitika

    hi.....
    check you settlemnt rule for internal order. forsure you will find mismatch between settlemnt rule and actual settlemnt. check in settlement rule the % to be settled.
    Regards
    Manish Jain
    Pls assign points if your problem get solved.

  • Can't settle an internal order by amount

    My company wants to settle internal orders to a fixed asset by amount instead of equivalence number or %.
    Can anyone describe in detail how to do this please. 
    Thanks and regards
    Walter

    HI,
    as mentioned above, if the "amount settlement" indicator is set in the settlement profile that is assigned to your CO-order you can go to KOB5, select the order/line items you want to settle tick "final settlement" and maintain the settlement rule by entering "amounts" to be settled not only "percentage" or " equivalence numbers".
    best regards, Christian

Maybe you are looking for

  • Original 10.4 disks will no longer work on MacPro after a Leopard install

    I have an Intel MacPro that shipped with 10.4. I installed 10.5 on the machine. I have a need for either a 10.4 partition or to revert back to 10.4 entirely. When I attempt to install 10.4 from the original grey disks that came with the machine I get

  • How to oracle manager server name

    for connecting OEM it asking username password oracle manager server so how can i get this name

  • Parameter in form for dynamic query in report

    Hello, I want to send parameters to report for replacing a dynamic query. I don't know how to make it... 1.I want my select statement like select * from emp &p_where_clause 2.I want to transfer parameters to report to replace the &p_where_clause. 3.I

  • Mail won't open following update

    A few weeks ago I got a pop up asking me to update mail. I did this but since then it won't open properly. It either freezes without any viewer window showing or a viewer window comes up but is completely blank. Anybody have any suggestions? I book  

  • SAPScript/SMARTFORM currency symbol

    I have an Invoice SMARTFORM that users now want $ against all the amounts. I have tried this $&IS_BIL_INVOICE-HD_GEN-DPVAL(<)& and this will print out $   1234.56 I want to be be $1234.56 How can I do this ?