Setup on suse

hello
i have linux suse, is it possible to install the oracle database server 10g on it ?
please send me the link for the right setup file
thanks

Yes it is possible.
Installation guide is located here: http://www.oracle.com/pls/db102/portal.portal_db?selected=1
To download software look here: http://www.oracle.com/technology/software/products/database/oracle10g/index.html

Similar Messages

Oracle RAC on Suse 9.1 ?

Hi Linux Forum,
For the purpose of a conference demonstration in the beginning of November - this year ;-) - I am planning to set up an Oracle RAC with 10g.
It would be really nice to do this setup on SuSe 9.1 with the 2.6 kernel.
My question is now as simple as:
Should I just forget it, since Oracle RAC does not work with a 2.6 kernel, or could I expect to reach the goal before november?
--Flemming

I would suggest to use Suse Enterprise Edition (30 day eval available) if your committed to suse - i have gotten it to work here.
Otherwise, the easiest path is to use WhiteBox or CentOS linux - both are free versions of Redhat enterprise linux.
Centos.com i think (or .org) - just google for CentOS linux or whitebox linux. THat way you can simply follow the setup guides oracle & redhat provide

SRM SUS Supplier operating in more countries?

Hi all.
SRM SUS 7.0
We are implementing SRM SUS, and my question is quite simple: A vendor that in ECC has more than 1 purchasing organization, how can I distinguish among those in SUS so that not all contact persons are receiving the PO?
I would expect to simply use either the purchasing org or company code, but the organizational setup for SUS is so limited, that the EKORG og BUK are not even considered.
Supplier ABC operates in EKORG 1 and 2; with 1 overall SAP vendor number. That's standard. In SUS the supplier is created in the PPOMV_BBP with no respect to BUK, and EKORG is not even a parameter/an attribute you can use while creating the vendor org units. When the supplier is replicated to SUS, it is created in PPOMV_BBP. Then you create a contact person in SUS to let SRM know who to send the PO for this vendor number to. However, the contact person does - again - not take either BUK or EKORG into consideration.
I can only see that if you use SAP ECC with 1 overall vendor number for multiple purchasing organizations, then SUS will not be able to distinguish and send the "New PO in SUS" info to the right contact persons, since there seem to be no organizational setup for SRM SUS...
I hope I am overlooking something simple, so any input is valid!

Hi Sam.
Thanks for the input. However, what you state is not accurate for our scenario at least. In MN04 we simply control the output conditions in ECC - however, for our MM-SUS implementation given our current ECC/SRM releases, we use XML out from ECC and into SRM again; not regular output conditions.
And my issue is still the following:
Functional scenario:
Supplier called ABC operationg in 2 countries but with 1 overall vendor number
Contact Person 1 created for vendor; this is in pur org 200
Contact Person 2 created for vendor; this is in pur org 300
Contact 1 should only see POs in pur org 200 in SUS; Contact 2 should only see POs in pur org 300 in SUS.
In ECC, this would be vendor ABC and create him in the 2 different pur orgs; no problem. In SUS, however, the vendor master (or BP) does not use the purchasing org in any case. And when creating the contact person in SUS for the overall vendor ABC, there is no org maintenance either. Therefore, all POs from ECC to SUS will be sent to both contact 1 and 2 because SUS does not seem to know how to handle 1 vendor number with multiple purchasing organizations.
This sounds strange to me! Any other input?
Edited by: Solar SCM on Jan 10, 2012 12:05 PM

SUS Vendor block - Help needed

Hi,
We are on SRM 7.0 and have setup MM-SUS scenario with XI as the interface. SRM and SUS are on different clients.
When a vendor is blocked in ECC, I want this same vendor to be with a blocked status in SUS too so that he does not carry out any transactions. In general I want the vendor in SUS to be in sync with the corresponding ECC Vendor.
I have manually run BBPUPDVD in SUS and this works fine i.e. the vendor gets blocked in SUS too.
Pl suggest how this can be automated.
Regards,
Nikhil
Edited by: Pbponikhil on Jan 7, 2011 12:06 PM

Hope it is a program BBPUPDVD and take help from technical resource and massage this program as you expected and schedule it.
I have multiple user IDs on SCN, is it possible to consolidate my IDs and my points?
Yes it is possible. You need to decide which user ID you want to keep, then send an email to [email protected], provide the user ID and ask for the consolidation to be done.
Your blog and forum contributions will all be moved to your single user ID and the points will be consolidated. For the wiki, your points will be brought to your unique user ID but unfortunately, we don't have the ability to move your Wiki contributions to another user ID at this time.
http://www.sdn.sap.com/irj/scn/crphelp

SUS roles

Hi,
We are on SRM 7.0 and have setup MM-SUS scenario with XI as the interface. SRM and SUS are on different clients.
We are trying to replicate the users(Contact persons) created by the admin person of a company in SUS into SRM also with 'Bidder' role.
For this I have made the following settings as per SAP document.
1. In Customizing for SAP Supplier Relationship Management under SAP Implementation Guide SAP Supplier Relationship
Management -- Supplier Self-Services -- Master Data -- Maintain Systems for Synchronization of User Data
2. In the External Systems view, select New Entries.
3. Under Logical System, select the system to which you want to connect the SUS User Management.
4. Set the Activated indicator to activate the synchronization of user data with this system.
5. In the System Name field, enter the reference name of your choice.
6. Enter a role, /SAPSRM/BIDDER, that can be assigned to the user in this system.
Thus all users created in SUS are replicated into SRM with Bidder role.
My query is that is it possible for the admin supplier to not create some contact persons as bidders? (Some contact persons should be for Order collaboration in SUS and others for bidding in SRM? )
Thanks & regards,
Nikhil
Edited by: Pbponikhil on Nov 28, 2010 8:05 AM

Hi,
Could someone pl shed some light on this?
Regards,
Nikhil

Synchronizing user data from SUS

Hi,
We are on SRM 7.0 and have setup MM-SUS scenario with XI as the interface.
We are trying to replicate the users(Contact persons) created by the admin person of a company in SUS into SRM also with 'Bidder' role.
For this I have made the following settings as per SAP document.
1. In Customizing for SAP Supplier Relationship Management under SAP Implementation Guide SAP Supplier Relationship
Management -- Supplier Self-Services -- Master Data -- Maintain Systems for Synchronization of User Data
2. In the External Systems view, select New Entries.
3. Under Logical System, select the system to which you want to connect the SUS User Management.
4. Set the Activated indicator to activate the synchronization of user data with this system.
5. In the System Name field, enter the reference name of your choice.
6. Enter a role, /SAPSRM/BIDDER, that can be assigned to the user in this system.
However after creation of users(Contact persons) , when the Admin user saves this data he gets the following error: "You are not authorized to create users in group".
Kindly advise on how to proceed.
Thanks & regards,
Nikhil
Edited by: Pbponikhil on Nov 15, 2010 4:04 PM

Hi Masa,
Had another query. Now that we have made this synchronization in SUS that whenever a user is created in SUS, he will be created as a bidder in SRM. Can I restrict this? Is it possible for the admin supplier to not create some contact persons as bidders? (Some contact persons should be for Order collaboration and others for bidding? )
Regards,
Nikhil

Changing Update Time for SUS

I have setup our SUS on a spare Mac server and it seems to be running fine, except that I would like to set the time that it will go looking for updates from Apple. Right now it's going out at 11:00a. NOT a good thing since I don't want it taking up any of our bandwidth at that time of the day.
I've poked around the GUI but I don't see where you can tell SUS when to go looking.
Any help on this would be greatly appreciated! Thx!

Hi,
just goto the start routine of your update rules or your transformation. The recordmode should be part of the communication structure and can be modified to whatever value you like.
Siggi

SLES 11.1 ppc64 vs x86_64 setups

Dear all
Is it possible to run x86_64 setups into SuSE 11.1 ppc64?
I have been installing oracle database 11gR2 setup of x86_64 in SLES 11.1 ppc64, but it fails to lauch runInstaller
Thanx

No, the IBM PowerPC and Intel x86_64 are based on different, incompatible CPU architecture. Oracle 11g may not be available for Linux on the PPC platform like 10g, but apparently it is for Linux on IBM System z and AIX (PPC64).
Edited by: Dude on Jun 16, 2012 3:27 PM

Vendor Login related

Hi Experts
Can anyone explain me the complete process of SUS vendor.
I transfered some vendors from R/3 to EBP. Made them as portal vendors . Then I transfered vendors to SUS using T.Code BBP_SP_SUPP_INI. Then using SOST T.code i logged in as a vendor, cretaed a user and login details in the sus server.
After I logged in as a vendor a message says that "you are not authorised to use BBPGLOBAL"
. On the menu there is START Sap Easy Access which is as in SUS server.
How do I proceed. Do the vendor need to login fom the EBP Login? Do I have to create any users for the said vendor login in EBP. I am not able to see the bid sebd to the vendor
Kindly help.

Hi,
Bidder logon to SUS. SUS has manu link for Bid Invitation. When bidder selects Bid Invitation link in SUS, application brings up the EBP ITS screen.
+ You have to set up bidder replication from SUS to EBP
+ Single Sign On should be setup from SUS to EBP
+ SUS bidder should have SAP_EC_SUS_BIDDER role
Please check SUS customizing.
SUS -> Master data -> Maintain Systems for Synchronization of User Data
Regards,
Masa

Reports Server: REP-3000

Hi all,
I have the following system setup:
OS: SuSE SLES-7 Linux
Kernel: 2.4.7-64GB-SMP
Memory: 1GB RAM
SWAP: 2GB
When I try to run the test report on the "Getting Started with Oracle9i Reports" I get the following error in a new Browser Window:
- Error
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
I don't want to use the standard X server. I decided to use Xvfb.
I performed the following steps:
- Shutdown of Oracle9iASr2, according to metalink note: 200475.1 (oracle)
- $ emctl stop
- $ webcachectl stop
- $ dcmctl shutdown
After that the 9iASr2 instance was sucessfully halted.
- Shutdown the standard X server which was running on display number 0 (root)
- Start Xfvb as root, according metalink note: 208745.1 (root)
- $ nohup /usr/bin/X11/Xvfb :50 -screen 0 1024x800x8 -pn -fp /usr/lib/X11/fonts/misc -sp /etc/X11/xserver/SecurityPolicy &
- $ DISPLAY=$(hostname):50.0; export DISPLAY
- $ /usr/X11R6/bin/xhost +
I also tested to execute the command xclock and I got no error.
- 9iASr2 config changes (oracle)
- Changed DISPLAY variable in .profile to the new value
- $ORACLE_HOME/bin/reports.sh
- DISPLAY=lindi:50; export DISPLAY
- $ORACLE_HOME/opmn/conf/opmn.xml
- <prop name="DISPLAY" value="localhost:50.0"/>
- This entry is in the OC4J_BI_Forms config tag. is that correct?
- Startup 9iASr2 (oracle)
- $ emctl start
- Connect to OEM and started the whole instance. All processed were sucessfull started
- I was able to connect to OEM, this means the Xvfb Frame Buffer is setup correctly otherwise I would not be able to connect to the EnterpriseManager. Is that correct?
- I was able to check the failed jobs in the reports server. That means the report server is running.
- I was able to run my forms application.
- I open the "Getting Started with Oracle9i Reports" page in a browser and got the error decribed above.
To me it seems that there has to be another DISPLAY variable I did not set correctly. Because when I start another X server with the user oracle on display 0 then I'm able to run the report sucessfully. But I don't want to start the standard X server, because then I need access to the console, and I not always have access to it.
Does anybody know what that could be and help me,
thanks
Oliver

Try the solution provided in the Release Notes Addendum section 5.10.15 (Component issues)
Anyway I am providing the notes here.
5.10.15 Reports in-process server gives REP-3000 error when running report
When running a sample report using the report in-process server, an error message
like the following can appear in the browser:
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
Use the following sample URL to test for this error message using the appropriate
hostname, domainname, port and two_task entries:
http://hostname.domainname:port/reports/rwservlet?report=test.rdf&userid=scott/t
iger@two_task&destype=cache&desformat=htmlcss
If the REP-3000 error message appears, the display is not set correctly. When
running a report server from the command line, the environment variable DISPLAY
setting is used. However, the reports in-process server uses the following
configuration file for the display setting:
$ORACLE_HOME/j2ee/OC4J_BI_Forms/config/oc4j.properties
The default display entry is as follows:
oracle.display=:0.0
On some servers, there might not be an X server running on :0.0 or this entry
might not be resolved correctly. In such cases, change the display setting to a
machine where an X server is present and can be accessed by this server.
To test whether an X server is running on given machine and you have permissions
to connect to it, you can use the following command:
xterm -display myserver:0.0
If you do not have permissions to access the display or if there is no such display
running on the given machine, an error similar to the following is displayed:
Xlib: connection to "myserver:0.0" refused by server
Xlib: Client is not authorized to connect to Server
xterm Xt error: Can't open display: myserver:0.0
Once you have identified a machine with a valid X server, or started the display on
the server machine being used, you can change the default entry to the new display.
For example to use the X server running on myserver:0.0 we would change the
default entry to:
oracle.display=myserver:0.0
After these changes are completed, it is necessary to restart the Forms/Reports oc4j
instance with the following commands:
$ cd $ORACLE_HOME/opmn/bin
$ ./opmnctl stopproc type=oc4j instancename=oc4j_bi_forms
$ ./opmnctl startproc type=oc4j instancename=oc4j_bi_forms
You can now test the sample URL again to make sure that the in-process server
works correctly. When using the sample URL, the sample test.rdf report should
be displayed in the browser.

No portal, only EBPuFF06SUS, vendor how to reply the bid and auction?

According to standard functions, vendor use portal to response bid invitation and auction, am I right?
Our customer have no portal, only EBP＆SUS, if want to use sourcing functionality, vendor how to reply the bid and auction? any solution on this case?

Hi,
Bidder logon to SUS. SUS has manu link for Bid Invitation. When bidder selects Bid Invitation link in SUS, application brings up the EBP ITS screen.
+ You have to set up bidder replication from SUS to EBP
+ Single Sign On should be setup from SUS to EBP
+ SUS bidder should have SAP_EC_SUS_BIDDER role
Please check SUS customizing.
SUS -> Master data -> Maintain Systems for Synchronization of User Data
Regards,
Masa

How do you cluster Maverics server?

How do you cluster Maverics server? I have two Mac Minis running Mavericks server that I would like to cluster (mirror) together preferably as load balanced but failover would be the next best thing. I am not actually using the services of server, but am hosting a streaming application.
Any ideas?

In terms of general Mac server 'clustering' Apple used to provide capabilities to do this but sadly killed off all their options in this area some time ago.
In your case even if Apple still provided those capabilities they would not apply as any streaming application would need to have been written to provide its own clustering capabilities.
The nearest option you can get to realisitically with Mac servers is to use DNS load-balancing where a load-balancer will 'share' the load between two or more servers and also test a server is live before sending a request to it. The servers need to have some method of having the same data which might mean using a SAN to store the data and Macs can access a SAN as MrHoffman mentioned. However none of Apple's own server services would really benefit from this.
A hypothetical example that could be achieved would be to have two Mac servers running Apple Software Update Server, you would not and cannot point client Macs to both but you could point client Macs to a DNS load-balancer which would allocate requests to one of the Mac servers. In this case the two Mac SUS servers might indepenently download updates or you might use the same 'folder' on a SAN or you might run some other sync command between the two. In my own case I actually setup two SUS servers in VMware virtual machines using Linux and had them each store their own copies but sync their folders, I had one run at 12am and one at 12pm so updates got downloaded twice a day. The DNS load-balancer then forwarded requests to either of them. (I used Reposado to act as the SUS software.)

AutoUpdate GroupWise Client

I am trying to get the AutoUpdate feature to work for our GroupWise System but I am having troubles.
I setup a SuSE HTML server and have copied the WIN32 directory to the site. I can browse all of the files like the setup says to.
Where do I get the seupip.exe file and the copyip.exe files? or do I even need those files?
I want to have the users login into their Groupwise clients / get prompted to update and then update the client from the web server.
Our GroupWise server is a SuSE 11 box.
Just wondering,
Ken

Am 08.09.2014 um 21:26 schrieb RLMILLIES:
> Where do I get the seupip.exe file and the copyip.exe files? or do I
> even need those files?
Have a look on the server at
/opt/novell/groupwise/agents/data/client/setup/win32
and additional in the admin documentation, chapter 69.
HTH
Go
Gotthard Anger
Anwenderbetreuung Netzwerkadministration
Landeskirchenamt der EKM
[email protected]
http://forums.novell.com/member.php?u=35038
Mails an diese Adresse werden nur nach vorheriger Ansage gelesen!
Mails for this address will only be read if you trigger me before.

SuperLumin Nemesis - anyone make the move yet?

Hello all,
I was looking to see if anyone has made the move to SuperLumin Nemesis to replace their BM server(s)?
I am currently looking at replacing my BM servers with SuperLumin and was looking for any suggestions.
I am thinking I will removed the mirrored drives of my current BM server and replace them with 2 new drives and setup a SUSE Linux 64 bit box for SuperLumin and place it in my secondary location for initial testing.
Does anyone know of any guides to setting up SuperLumin Nemesis in a Netware environment? I would really like to take advantage of the 64 bit and moving forward with a Linux solution.
Our current setup is:
File and print servers: NW 6.5 SP8 and eDir 8.7.3.10
BM Servers (2): NW 6.5 SP7, eDir 8.7.3.10 and BM 3.9 SP2 - running in their own OU that is partitioned.
One of my BM servers has basic internet access out setup with NAT and one DMZ. The other BM server has Internet access with NAT (static and dynamic), VPN configured and 2 DMZs setup.
My thinking is I will just replace the simpler solution for testing with SuperLumin.
What other impact should I be looking for? I know when my 2nd BM server was down (water damage, time waiting for parts to arrive) - a lot of users get their eDir credentials confirmed through this server, I had quirky issues with dirve mappings not working perfectly but if I set their preferred server to a different server, everything worked flawlessly.
Any thoughts or ideas greatly appreciated.
Steve D.

Originally Posted by sjdimare
Hello all,
I was looking to see if anyone has made the move to SuperLumin Nemesis to replace their BM server(s)?
I am currently looking at replacing my BM servers with SuperLumin and was looking for any suggestions.
I am thinking I will removed the mirrored drives of my current BM server and replace them with 2 new drives and setup a SUSE Linux 64 bit box for SuperLumin and place it in my secondary location for initial testing.
Does anyone know of any guides to setting up SuperLumin Nemesis in a Netware environment? I would really like to take advantage of the 64 bit and moving forward with a Linux solution.
Our current setup is:
File and print servers: NW 6.5 SP8 and eDir 8.7.3.10
BM Servers (2): NW 6.5 SP7, eDir 8.7.3.10 and BM 3.9 SP2 - running in their own OU that is partitioned.
One of my BM servers has basic internet access out setup with NAT and one DMZ. The other BM server has Internet access with NAT (static and dynamic), VPN configured and 2 DMZs setup.
My thinking is I will just replace the simpler solution for testing with SuperLumin.
What other impact should I be looking for? I know when my 2nd BM server was down (water damage, time waiting for parts to arrive) - a lot of users get their eDir credentials confirmed through this server, I had quirky issues with dirve mappings not working perfectly but if I set their preferred server to a different server, everything worked flawlessly.
Any thoughts or ideas greatly appreciated.
Steve D.
Steve,
Greetings from SuperLumin development. I wanted to comment on your questions about installing SuperLumin Nemesis, disk configuration, etc.
The SuperLumin proxy prefers individual disk spindles for the cache drives. This allows the highest throughput rate as we can control the disks individually. Many customers still want to have the OS drives in a RAID 0 configuration. In this case, we recommend that they mirror the first two disks for the OS and then the remainder of the disks are presented as a JBOD that the SuperLumin proxy can control individually. This is all assuming that you are doing hardware level RAID.
Also, our installation program lays down the SLES 11 OS for you. There is no reason for you to pre-install SLES 11 and then the SuperLumin proxy on top of it. Our install program does a complete reimage of the server and lays down both.
To install into a NetWare environment, all we really need is access to eDirectory via LDAP. Assuming you are using Novell ClientTrust, you would also want to manage the installation of the SuperLumin Single Sign-On (SSO) client. Our SSO client listens on the same port as ClientTrust (port 3024), so you would need to put some thought into how the users would migrate from ClientTrust to the SuperLumin SSO client. Our client can listen on a different port (e.g. 3025), so that may be an option for you.
To get the greatest performance out of the SuperLumin proxy, we recommend that you put 8GB or more of memory in the server (isn't 64-bit great) and at least 2 drives dedicated to the cache. Note that these two drives are distinct from the drive(s) used for the OS. So you would need 3-4 (or more) drives depending on if you mirrored the OS drives or not. Since this is a 64-bit platform you can add up to 16TB of memory and 64 cache disks. This allows us to scale very well.
One final note. Our VPN solution will not be complete until January/February of 2011. We have the VPN software in place. The ability to manage the VPN from our tools will come in January/February.
Regards,
Brad

SRM - SUS setup

Hello Experts,
I am in the process of setting up a SRM-SUS scenario. I have replicated both purchasing companies and vendors. I get successfull messages in interface monitoring tool SXMB_MONI, but my problem is that neither the company nor the vendor is anywhere to be found. I have looked in the org/vendor structures, table BUT000, transaction BP. They are nowhere.
Where can I expect to find them? Have you ever had this problem? Do you know of a solution?
Regards
Rene

Hi Rene,
You can also check whether the vendors are successfully replicated or failed for some reason from the backend system in SLG1 transaction code. if your replicating for the first time, then write this Object --> BBPGETVD, put the correct dates when you replicated and Execute.
Check the LOG, it will tell the exact reason why the Vendor replication failed.
If you get the log and not able to analyze, please send the screen shot, i will help to analyze.
Check for other relevant Objects for SUS and you may get the log for what your missing.
Thanks.
From RBEI,
Snehal

Setup on suse

Similar Messages

Maybe you are looking for