Setup the proxy client with username/passwd

Hi all,
I need to configure the proxy client on my arch (without X), but with username and password. How can i do this?

Similar Messages

Error while creating the HTTP client with destination GB_DPSRetrieve

Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
Kishore

Hi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar

Web service proxy client with client cert cause SSLSessionNotFoundErr

Hi,
I tried to run web service proxy client with certification from JDeveloper 10.1.3.0.4 to call PKI enabled web service got folllowing error:
WARNING: Unable to connect to URL: due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
Web service deployed on OAS

Hi,
i am trying to invoke from JDeveloper (10.1.3) a CRM On Demand's Web Service and I hava the same problem:
ADVERTENCIA: Unable to connect to URL: https://secure-ausomxgfa.crmondemand.com/Services/Integration due to java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
java.rmi.RemoteException: ; nested exception is:
     HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
     at testerlast.runtime.Contact_Stub.contactInsert(Contact_Stub.java:96)
     at testerlast.ContactClient.contactInsert(ContactClient.java:88)
     at testerlast.ContactClient.main(ContactClient.java:69)
Caused by: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: javax.net.ssl.SSLException: SSL handshake failed: SSLSessionNotFoundErr
     at oracle.j2ee.ws.common.util.exception.JAXRPCExceptionBase.<init>(JAXRPCExceptionBase.java:93)
     at oracle.j2ee.ws.common.util.exception.JAXRPCExceptionBase.<init>(JAXRPCExceptionBase.java:89)
     at oracle.j2ee.ws.client.ClientTransportException.<init>(ClientTransportException.java:33)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(HttpClientTransport.java:144)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(HttpClientTransport.java:121)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:169)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:111)
     at testerlast.runtime.Contact_Stub.contactInsert(Contact_Stub.java:80)
     ... 2 more
To do the invocation I have done a proxy to consume this Web Service, with the follow main:
public static void main(String[] args) {
try {
testerlast.ContactClient myPort = new testerlast.ContactClient();
System.out.println("calling " + myPort.getEndpoint());
myPort.setUsername(nameUser);
myPort.setPassword(password);
ListOfContactData llista = new ListOfContactData();
ContactData[] contacts=new ContactData[2];
ContactData contact=new ContactData();
ContactInsert_Input input=new ContactInsert_Input();
// Login WS HTTPS
String idSesion=connexioWS_CRM.logon(URL,nameUser,password);
// Add contact
for (int i = 0; i < contacts.length; i++) {
contact.setId("ProvaWSCRM"+i);
contact.setContactFirstName("JDeveloper"+i);
contact.setContactLastName("prove"+i);
contact.setCellularPhone("77777777"+i);
contact.setDescription("Add contact with Id:"+contact.getId());
contacts=contact;
System.out.println("Id:"+contacts[i].getId()+" firstName:"+contacts[i].getContactFirstName()+" lastName:"+contacts[i].getContactLastName());
llista.setContact(contacts);
input.setListOfContact(llista);
input.setEcho("off");
System.out.println("Pwd:"+myPort.getPassword()+" Port:"+myPort._port+" endpoint:"+myPort.getEndpoint()+" user:"+myPort.getUsername());
myPort.contactInsert(llista,"LIC","Broadset","OFF");
// Logout en WS (HTTPS)
connexioWS_CRM.logoff(URL, idSesion);
} catch (Exception ex) {
ex.printStackTrace();
What's wrong? Any idea?
Thank you
Edited by: user12085357 on 31-oct-2009 10:39

Configuring a proxy server with username and passw...

Dear All,
There is one thing which I have found in all the Nokia phones I have had until now which I find very disappointing:
A proxy server can be set BUT a username and password for it cannot.
In the case of trying to connect to the Internet outside a corporate network normally a proxy connection with username and password has to be entered.
I can enter the proxy server on my Nokia phone but there is no place to enter a username and password in order to authenticate in front of the proxy server.
Does Nokia think about adding this functionality, which, if I may say, has been in Windows Mobile since quite some time.
If not for all phones, at least for the E series which are intended to be used in secure business networks.
In the current situation I can use the corporate Wi-Fi to check my Exchange email which is great, but when I need to access something outside the corporate network I have to use the 3G network.
So two question arise from the above:
1. Will Nokia at some point implement Proxy Server Authentication? (Or maybe I'm not able to find it)
2. Is there any application which allows Proxy Server Authentication to be used when connecting to the Internet?
Thank you in advance for your help!
Mitko
Nokia 650, Nokia 3510i, Nokia 3650, Nokia 6680, Nokia N73, Nokia E51, Nokia 5800 XM, HTC Desire, HTC Trophy, Nokia Lumia 820

Hi,
You can do:
username:password@proxyservername
Andy

Error while creating the HTTP client with destination

Hi ,
I am getting this error while connecting to https location on receiver channel . The below error i am getting in SXMB_moni
Error while creating the HTTP client with destination
The receiver party is doing some security setting on there end and for that purpose we have provided the external IP address to them , after that we are getting the above error.
We have already installed the client certificate on our staging server , and have done the correct setting in SM59 and channel.

Check few things..
1) I believe you use specify destination for the addressing type field in the comm channel. If so make sure you entered valid target URL address in the SM59 of type http destination.
2) Check the validitity of the certificate. You can import the certificate both in java and abap stack.
3) Make sure certificate is installed as expected.
4) Send the request and talk to the target system and check what error information they get in their log related to ssl.

Unable to connect the crm client with the IPC server

Hi,
I am unable to connect with one CRM client with the IPC server.
my Dispatcher and all the IPC servers are working all.
Plz helpme out.
With thanks and Regards,
Yusuf.

Hi Muhammed,
Check in the file dispatcher.properties if the RFC names are correctly maintained.
Regards,
Patricia
PS Your post was in the wrong forum. I moved it to the correct one where the chance of an answer is much higher.
Hope you understand and good luck.
Regards,
Patricia
SDN Moderator

Can't log in to the desktop client with facebook

Signed up to Spotify on another computer and it works fine. But in this one I can log in on the web, but the desktop client won't log in through facebook. Just says veryfing and then the window closes and the client stays on the login screen. Reset cookies, uninstalled Spotify, removed the app from facebook, nothing works & I can't switch from the facebook login to a Spotify one cause of my email.

Hi kri348,
Welcome to our Microsoft Mobile Community. We appreciate your time and effort posting here. To clarify, are you having issues logging in with the Ovi Chat? If yes, did you receive any error code/ message? If not, tell us more about your concern. By the way, what is the model of your phone?
We recommend posting your concern with all the important details will help you to solicit answers. You can always check our community guidelines. See this: Guidelines – read these first!. We'll wait for your reply.

Why Doesn't Project TV woek with IE but not Firefox? I tried the "Proxy" suggestion with no results.

Project TV works fine with IE. It used to work with Firefox but no longer. I tried the "Proxy" suggestion and clearing History with no results?

scher2000
First and foremost, thank you for your help and concern. It is appreciated.
Project TV works just fine with IE but will not work at all with Firefox although it did work a few days ago. I have tried::
Clearing History, as suggested,
Changing the "Proxy: settings, as suggested
This has been all to no avail.
Link:
http://www.free-tv-video-online.me/
Also, my WOW Speed test works fine with IE but not with Firefox; I just ried it on both.
Link:
http://speed.nap.wideopenwest.com/
I prefer Firefox but it appears to be giving me problems resulting in having to use IE.
Again, Thank you.:

Java proxy client with HTTP sender

I have SP15. I have sender agreement with HTTP adapter for system A and Java Proxy Cleint that send message as system A.
When I send message through Java proxy I see error:
<i>SOAPFault received from Integration Server. ErrorCode/Category: XIServer/IN_BIND_WRONG_ADPT; Params: HTTP; AdditionalText: ; ApplicationFaultMessage: ; ErrorStack: Server agreement found belongs to adapter HTTP; current adapter is 'XI' </i>
When I deleted sender agreement it worked.
Could you explain this strange behavior? Is it a bug. Sender agrement for HTTP is necessary since SP16

I have the same problem with SOAP and file adapter. I've posted this here already.
XIServer/IN_BIND_WRONG_ADPT
I have deleted the sender agreement for my soap adapter scenarios, because a sender agreement is not necessary (created by the wizard). After that the soap adapter scenarios work fine. But at scenarios with a sender file adapter you need a sender agreement.
We had the following situation:
XI Test, XI SP17, Basis SP16 --> IN_BIND_WRONG_ADPT problem
XI QA, XI SP17, Basis SP14 --> okay
XI Prod, XI SP15, Basis SP 16 --> okay
We patched our XI QA to
XI QA, XI SP17, Basis SP16
After that we have the IN_BIND_WRONG_ADPT problem at our XI QA system too.
I started a SAPP OSS call two weeks ago but got no solution till now. They checked our systems some times but with no result.
Our central SLD is on the XI Prod System. Perhaps there is a connection. But I don't want to patch my XI Prod system to SP 17, because it's the only system that works without errors.
Message was edited by: Gil Ritter

How do you setup the Mail app with iCloud on an eMac?

I have recently made an iCloud account on my iPad- includng a free "@me.com" email address, which I've been longing for! I do, however, have the old Apple eMac and would like to set up my "@me.com" email address. When I go to set it up, there is (on the pull down menu) ".Mac", which did not work, "IMAP", and "POP". I know iCloud cannot use "POP", so is there any way to do "IMAP" and how? Please help!

For some reason, it won't connect to SMTP. I can get emails, but I can't write any. You said to do each port, but there is nothing asking for each port. I need help with the Mail application for Mac OS X v. 10.4.11 (Tiger). Can you help? The attached pics are the steps I've done...
(Above) I filled in all it asks....
(Above) Then I filled this in- I am trying to do it without typing "imap.mail.me.com" becuase if you see, it says "Example: mail.example.com"... (Below) It has failed...
-NOW I WILL DO "imap.mail.me.com"- (Below)
(Above) Then it gives me a pull-down list to choose from for the Outgoing Mail Server, so I just type: "smtp.mail.me.com" (below)....THEN YOU GET THE ERROR!

How i can setup the airport express with pwoerline adapter from linksys

hi
i was using the linksys router but as my flat was big . i use powerline adapter from linksys also PLWK400 and it was working perfectly .
but when i change my router to apple ( airport express ) the power line adapter not work any more.
i have contacted the linksys Tech support and they inform me that pwoerline adaoter should work with any router.but unfortunately not work with apple router.
can some body help please...

i would like to calrify that i am using airport extreme not express.
thanks

How to setup the chinese word with unicode 5CEF?

Hi,
I have one question about traditional chinese word with 峯 in oracle database.
How should i to set the coninguration of oracle database ?
This chinese word which unicode code is 5CEF.
THX.

It is not possible to get 2 consoles working on one network simultaneously. You can get them working one at a time only. The router is capable of making one internet connection, carrying a single WAN IP. This will be then used when you connect to the Xbox server. You will need a couple of WAN IPs to make your consoles connect at the same time.
To resolve NAT issues on your Xbox, you must first configure your console with a Manual or Static IP. If you're using a gateway, there may be a need to unbridge the modem. From there, log- in to Linksys Smart Wifi and click Security under Router Settings. Go to Apps & Gaming and configure your rules under Single Port Forwarding.

Proxy client (over USB connection) with DHCP assigned IP address doesn't work with FRDM-K64F

Hello,
after reading about the issues on this forum with a static IP address on the Freescale FRDM-K64F board I went for an DHCP address but I can't get the proxy client to work over a USB connection with DHCP either.
My console tells me the following:
RTC Time: Wed 2014-01-01 00:07:27
Network initialized
IP Address:      10.143.xxx.yyy (xxx and yyy is real numbers, just changing them for the forum to letters)
Subnet mask:     255.255.252.0
Gateway:         10.143.xxx.yyy
MAC-address:     00:0c:00:06:70:00
And when I try o to connect with the following command :
java -jar proxy.jar -socket 10.143.xxx.yyy
I get the following output and no CLI interface:
Trying to open socket connection with device: 10.143.xxx.yyy:2201
Connected to the socket: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]
Open channel 8 with hash 0x130399b3
Channel 8 CLOSED -> OPENED
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 OPENED -> AVAILABLE
Open channel 9 with hash 0x0
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
Channel 8 AVAILABLE -> REQUEST_SENT
notifyResponse ACK_RESPONSE on channel 8
Channel 8 REQUEST_SENT -> ACKNOWLEDGED
Channel 8 ACKNOWLEDGED -> DATA_SENT
notifyResponse AVAILABLE_RESPONSE on channel 8
Channel 8 DATA_SENT -> AVAILABLE
I don't know if this matter but my java version is:
java version "1.8.0_31"
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
Any ideas or am I missing something completely?
Thanks
Andy

Hi, Andy. Please excuse my ignorance, I am very new at this ME embedded stuff. I had my challenges, but was finally able to get my board up with a static address. I went through a lot of headaches, but finally got the board flashed with the latest bin. I then updated the jwc_properties.ini file on the SD card to include:
# Whether static configuration or DHCP server is used do get IP address. Possible values: dhcp,static
ip.method = static
# IP address,used with static IP configuration only
ip.addr = 192.168.0.30
# Network mask,used with static IP configuration only
ip.netmask = 255.255.255.0
# Network gateway,used with static IP configuration only
ip.gateway = 192.168.0.1
# DNS server,used with static IP configuration only
ip.dns = 208.67.222.222
# MAC address
mac.addr = 01:02:03:04:05:06
I was then put the card into the board, disconnected both USB cables, and then powered it up. From that point I was able to ping the board. I can now use Device Manager in NetBeans to connect to the device.
I am struggling quite a bit with many issues. It seems that when I try to stop the app from NetBeans, the "please wait" dialog hangs forever. I have to use Windows Task Manager to kill the "JavaW" process tree and reconnect the board.
I have also had trouble understanding the GPIO pin assignments. Another gotcha was trying to use the AutoStart feature. Since the sample app never cleanly exited, I thought that I bricked the board. The secret is to power it down, remove the SD card, and then delete all files EXCEPT the jwc_properties.ini file, put the SD card back in, then power up. It seems that the board forgets that the MIDlet was installed.
Hope this helps others out there.
Please everybody, post your experiences here. There seem to be very few of us, and finding pearls in the dust is rare right now.
Regards,
Pete

Is there a way to integrate contacts with the email client on the Mac?

I am switching from a PC to a Mac. Is there a way to integrate the email client with contacts? For example on the iphone you can email through your contacts.

It is integrated.

Proxy support with dual proxies

I need to support dual proxy servers in a web-service client software. I am setting the proxy settings as below and try to create the binding and if it fails I will try the second proxy.
// setup the proxy settings
System.setProperty("http.proxyHost", proxyHost1);
System.setProperty("http.proxyPort", proxyPort1);
try to bind
if bindingfails {
System.clearProperty("http.proxyHost");
System.clearProperty("http.proxyPort");
try to bind.
I know I have written some psuedocode... what I think is happening is that the second time I try to bind to web service, it still used the same settings as before. Has anyone come across this issue or any one know what is the best way to support dual proxies.
Thanks

To add to Ajay's correct posting - even if you had an external router to handle the BGP and the agreement from the provider who has assigned you your /28, you could not use the first provider's assigned netblock with a second provider since it is smaller than a /24 - the smallest allowed portable block.
If you were to acquire a provider-independent /24 assigned directly to you from your provider or RIR (ARIN, RIPE, APNIC, etc.) you could potentially use that (still requiring an external router). However it is unlikely that you could get a new one assigned since the /28 suffices for your hosts at this point.
As you describe it now, if you lose a provider, you will lose all your sessions, even under best practices and best possible configuration scenario.
One alternative may be to inquire about redundant service from your preferred provider. Depending on your location's service options, this may be possible. You would be to be diligent in ensuring that the redundancy is adequate to protect your connectivity (e.g., different upstream devices, diverse connections into your building, etc.) In such a service scenario, your provider may be able to retain your IP space and managing routing to you dynamically.
Hope this helps.

Setup the proxy client with username/passwd

Similar Messages

Maybe you are looking for