Several Audio streams playing at once

Hello again Friends,
Sorry to be such a pain, but I know that someone here has the answer to this problem. The original thread is located here.
http://forums.adobe.com/thread/51284?tstart=0
The post is marked answered! The writer refers to two swf files that corrected the problem, but did not include them in the post. They were given to him by Adobe support and contained actionscript to initially stop the sound streams (stopAllSounds), and then restart them with the second swf. I have searched high and low to find the code to restart the sounds (or find an antedote to stopAllSounds). I would appreciate any help here. This is holding up a fairly major project.
Thanks,
Brad (the Pest)

I would say that if you want the song to loop that it may be
better to use a Sound Object and a little code. so if you would be
interested in this route - remove the sound from the timeline.
first - set up the sound by selecting it in the library and
right-click select 'properties...' - then in the properties panel
check the 'export for ActionScript' box and give the sound an
'Indentifier' name - this will allow you to use the sound file
within the document and point to it in code by using the ID name.
next - make a new layer called 'actions' on the main timeline
if you don't have one already - select the first frame and enter
the code below - replace the 'IDname.mp3' with the ID name of your
sound file you've assigned.
see the 'sound.start()' method below - the second parameter
in it refers to the amount of 'loops' that it will run before
stopping - you can set this any way you would like.
more information on the Sound Object class is available
HERE

Similar Messages

  • Audio Stream - Play Speed

    How to increase/decrease audio stream (wave file) play speed.

    While waiting for replies (I don't use xdcam) go to Google and enter
    site:forums.adobe.com xdcam
    to read other xdcam discussions... one may help

  • Two audio files play at once

    We find that when we insert a narrated Captivate demo into an
    Adobe Presenter presentation and run the presenation from a
    non-Connect server, the audio from the slide following the demo
    plays at the same time the demo narration plays.
    We didn't experience this problem with Breeze.
    How can we fix this problem?

    We find that when we insert a narrated Captivate demo into an
    Adobe Presenter presentation and run the presenation from a
    non-Connect server, the audio from the slide following the demo
    plays at the same time the demo narration plays.
    We didn't experience this problem with Breeze.
    How can we fix this problem?

  • Audio only plays once

    I am trying to convert some VCD clips to dv files in order to edit them in FCP and burn to a DVD. This is the sequence of conversions etc. that I perform:
    Step 1. Use VCDGearX to convert the (VCD)DAT to mpg. The resultant file plays fine in QuickTime.
    Step 2. Use ffmpegX to convert the mpg file to DV, using all the default settings. Resultant file plays fine with QuickTime.
    Step 3. Import DV file into Final Cut Pro 4. DV file imports OK and audio plays once only. Thereafter I cannot hear the audio, and no audio waveform can be seen, even after rendering.
    If I quit FCP and reopen, the audio will play only once again.
    Can anyone tell me what is happening, how I can get the audio and the waveform to appear as it should.
    iMac G4   Mac OS X (10.4.6)  

    Glad you found what you need...
    New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...
    Patrick

  • Synchronization of Multiple Audio Streams

    Hi,
    I'm trying to synchronize several Audio streams during
    playback and recording. Several questions I have and not sure if
    actually feasible or how to best address :
    1/ When playing back 2 audio streams, how can I ensure the
    playback is full synchronized (<20ms difference) when client
    receives the 2 streams in playback ? Basically trying to simulate a
    mix-down with 2 // streaming. Ultimately wants to achieve this with
    about 5 audio streams playing back and can't accept tolerate delay.
    I suspect I need to synchronize the start of each stream so that
    they all start together, but not been very succesfull so far.
    Alternatively is there a way to mix-down 2 streams on server and
    send back a 1 mixed-down audio stream ?
    2/ More tricky I believe : If I playback 1 audio stream and
    start recording a separate audio stream, I'm getting again
    desynchronised. Later If I replay the 1 audio and the newly
    recorded one, both are not anymore aligned. I suspect (but not sure
    that the delay and desynchronization is introduced during the
    recording but not sure and reason I asked first question...
    If someone knows those answers or could provide some
    direction of work.... I would greatly appreciate.
    Thanks

    When it comes to FMS streams, there really is no way of
    accurately syncronizing streams. Since you can't keep data in
    buffer when pausing the stream, and you have to rebuffer any time
    you seek, it's impossible.
    The only way I've been able to sync flv's is using
    progressive download. With progressive, you can sync streams, but
    the accuracy is limited to the keyframe interval of the flv files.
    For example, if you have 2 keyframes per second, you can achieve
    sync with 1 second accuracy. with 4 keyframes per second, you can
    get the offset down to 500ms. If you make every frame a keyframe
    (makes for a huge file), you can get frame accurate sync.
    The theory is to build a class that monitors the time and
    buffer length properties of your two streams, pausing and/or
    seeking when needed to maintain sync.

  • Dual Audio Streams

    Is there a way to have two audio streams playing at the same time on the iPad and/or iPhone? I'm looking for a workaround specifically with Spotify playing music while watching a workout video streaming from iTunes. Thanks!

    See page 98 of iPhone iOS4 User Guide
    or page 58 of the iPad User Guide

  • Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.

    I am Streaming audio from my IPAD to my Apple TV from Rhapsody application.  when Apple TV go into Screen Saver mode, about 5 minutes after that it stops playing the Audio Stream and goes into Sleep mode.  I am using the Optical Out from the Apple TV to my receiver, the Apple TV is hard Wired to the Network, the IPAD is Wirelessly attached to the network (it continues to play the Audio Stream).  When the Apple TV is turned back on it resumes playing once I manual select it for output from the IPAD.  All device are on current releases of software.  I have no Video hooked up to the Apple TV.  How do I correct this?

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • IDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops in that the viewer access from the main menu to play along with

    iDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops that the viewer access from the main menu to play along with

    Export the slideshow out of iMovie via the File  ➙  Share ➙ File menu option as a 480p Quicktime movie.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • C# Webbrowser using VLCplugin to play online audio stream

    Hello all,
    I have been trying to get the VLC to play a audio stream from a URL address.
    I created a forms application and added a webbroswer from the toolbox. I can navigate no problem but if I goto a link like
    http://audio.wgbh.org/otherWaysToListen/wcai.m3u
    I get a popup dialog that asked do I want to open this file. If i accept VLC opens and it plays no issue.
    However, what I want is it to play without the popup and in my application not with the VLC installed on my computer.
    I have seem many things about VLC selecting files but I have not been able to find a reference for pulling a stream with my C# form when browsing with the webbrowser item on my form.
    Any help would be thankful.

    Hi Badidea,
    >> However, what I want is it to play without the popup and in my application not with the VLC installed on my computer.
    Do you want to open the url without the popup? If so, I think you could block downloads from the webbrowser control, the link below shows the details:
    # How to block downloads in .NET WebBrowser control?
    http://stackoverflow.com/questions/483262/how-to-block-downloads-in-net-webbrowser-control
    But with this way, I am afraid that you could not open the audio. If you want to open the audio without the popup, I think you could automatically download the file, more information you could turn to the link below:
    # Suppressing the Save/Open Dialog box in a WebBrowser control
    http://stackoverflow.com/questions/3538874/suppressing-the-save-open-dialog-box-in-a-webbrowser-control
    But if you want to open the audio in your application without the VLC, I am afraid that you could not achieve that. As you know, the audio needs the special player from the URL, I think it is restricted if you want to open the audio without the player.
    Sorry for the inconvenient.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • .mp3 compressed audio stream dose not play in AIR

    Hi All,
    We are trying to load stream audio file with mp3 compression in the AIR app using the follwoing code using FLash CS4 -
    var snd:Sound = new Sound();      
    snd.load(new URLRequest(""http://67.159.30.133""));
    snd.play();
    This works fine when we publish for flashPlayer 9/10. When we try to publish it using AIR the sound dose not play.
    We have tested with another approach, where we are loading sound with .flv compression. Here we are using NetConnection and NetStream method to play the sound. With .flv compression it works well in both flash player version as well AIR versions. On the other side when we try to use NetConnection and NetStream method to play .mp3 compressed audio stream it dose not pl when we publish in AIR or flashplayer.
    If anyone having any info to play .mp3 compressed format in AIR file will be very much appreciable.
    Regards,
    Kaushik
    [email protected]

    While waiting for replies (I don't use xdcam) go to Google and enter
    site:forums.adobe.com xdcam
    to read other xdcam discussions... one may help

  • I recently restored my itunes library and many songs imported from CD  are now marked mpeg audio stream.  I can't play them.  Why did this happen?

    I recently restored my itunes library and many songs imported from CD are now marked mpeg audio stream.  I can't play them.  Other imports are just fine.  Why did this happen?

    If there is a cure you may find the folks over here have more information for you. Repost your question here:
    https://discussions.apple.com/community/itunes/itunes_for_mac?view=discussions

  • Is there a way to have audio only play once in Adobe Cp 6?

    I have a project that includes a click box.  If the learner click OUTSIDE the click box then a failure caption comes up with audio.  I'd like to have that audio play only once, even if they continue to click outside the click box.  Right now, if they keep clicking outside the click box, the audio will start playing and I will have multiple instances of the audio playing (and soon it sounds like a cocktail party).  How can I correct this?

    Hi there,
    If you want that the audio should play once after clicking that is possible, but after clicking outside it will replay that audio, but only one instance of audio will be there.
    You can Insert two click boxes and One will cover the whole Slide (Incorrect ) and Other will be inside that click box (for correct region). Then You can apply standard actions on these click boxes when clicked, and include an action to stop triggered audio and another action to play the Audio.
    Like below I added two click boxes and two text captions, Text Captions are not visible in output, they will only be visible after clicking the respective click box:
    The advanced action on correct click box and shows the correct Caption and plays the audio for correct:
    The advanced action on incorrect click box and shows the incorrect Caption and plays the audio for incorrect.
    You can also change the attempts on that click box, by default it is infinite:
    Is this what you want? please reply.

  • Audio file - play once

    My client wants an audio file to play once automatically on
    page load; but when they navigate off the page and then return,
    they do not want the audio to play again. I know that this might
    annoy the viewers, but if that is what they want, I need to show
    them that it works.
    Can some one point me to a script or a way to setup cookies
    that will do this?
    Regards,
    Bill Schaepe

    You need iTunes on the computer. With the iPod connected to the copmputer yo have to go to the iTunes U pane (it is one of the panes like Music, Podcast, Apps, Summary, Info that shows what is/can be on the iPod). At the top of the pane is a check box y have to check to sync iTunes U media.

  • Audio stream won't play in Premiere, but does in FCP?

    I got some footage to edit from a director who shot the project on the Sony XDCam3. He then converted the footage to MOV's in a software that Sony provides so he could give it to me to edit. He wants the project edited in Premiere Pro 5.5 because that's what he's got on his machine and if he wants to, he'd like to make changes later on. So, the problem is the footage imports fine. The video stream is there and plays, but the audio stream just seems empty. It's there, but no audio. I then tested the same clip in FCP and it works perfectly. Plays fine, video and audio. I'm not sure what the issue is. I'm attaching a screen shot of the specs on the clips if that might help get to the bottom of what my issue is. Thanks so much for any help on this!

    While waiting for replies (I don't use xdcam) go to Google and enter
    site:forums.adobe.com xdcam
    to read other xdcam discussions... one may help

  • VoIP Phone Call from mobile to PC - Streaming the audio and playing it back

    In short:
    How can I stream the audio captured from a mobile to PC and play it back.
    In brief:
    I am trying to develope an application to chat(voice) between a J2ME program and a Java program which is running in a PC.
    Currently I am able to send and receive the text message by using SIP protocol after establishing session by using SIP protocol.
    As a next step, I want to capture the audio and play back in PC and Mobile.
    Now, I am able to capture audio from the microphone of the mobile.
    Player p =Manager.createPlayer("capture://audio?rate=8000&bits=8&Channels=1");
                    p.realize();
                    // get the RecordControl over this Player
                    RecordControl rc = (RecordControl)p.getControl("RecordControl");
                    // create an OutputStream which the RecordControl will use
                    // to write write the recorded data.
                    ByteArrayOutputStream output = new ByteArrayOutputStream();
                    rc.setRecordStream(output);
                    // start the recording
                    rc.startRecord();
                    p.start();How can I stream it to PC and play it back? Also, I need to send audio captured from PC to mobile and have to play it back.
    Pl. do reply.

    now I am able to play the stream (with some delay),
    while(inputStream.read(buf)!=-1) {
                        try {
                            ByteArrayInputStream recordedInputStream = new ByteArrayInputStream(buf);
                            play2 = Manager.createPlayer(recordedInputStream, "audio/x-wav");
                            System.out.println("Playback player created...");
                            play2.prefetch();
                            System.out.println("Playback player prefetched...");
                            play2.realize();
                            System.out.println("Playback player realized...");
                            play2.start();
                            System.out.println("Playback player started...");
                        } catch (MediaException ex) {
                            ex.printStackTrace();
                        } catch(Exception e) {
                            e.printStackTrace();
                        }But, the problem is , I have to play the audio, as well as capture the audio to create the duplex communication.
    Is it possible to do the audio capture and playback simultaneously? If it is not possible, pl suggest an idea to achieve this.
    null

Maybe you are looking for