Several pop up boxes on same image

Hi,
I am using Dreamweaver CS4 and I would like to create a image with several pop up boxes on "mouse over" (or whatever you call it). I would like the pop up box to contain both a small picture and a little text. An example of what I would like is found on the map on the left hand side of this page:
http://www.colombia.travel/es/
I have seached the web for clues but I am still kind of "blank" of where to start.
Anybody know if it possible to make such pop up boxes within DW CS4, or should I look for another software. What kuind of software would you recommend?
Best regards,
Ivan

In addition to the previous link given, this is another option:
http://www.walterzorn.com/tooltip/tooltip_e.htm
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates | Tutorials | SEO Articles
http://www.DreamweaverResources.com
http://twitter.com/nadiap

Similar Messages

Need several forms to show the same image from an image library

Hi
I have several InfoPath forms with a logo at the top of the form. I would like to have the logo linked to an image file so if I have to change the logo, I can just overwrite the file that's sitting in a SharePoint image library without having to edit and
re-publish 30 forms.
I can get the file placed in the InfoPath form, but when I publish the form, the image looks correct but the publish process embeds the image. If I view the properties of the image on the form in SharePoint, the URL isn't the URL to the image in the image
library. It's a long URL that looks hashed.
So I went back to InfoPath and tried Insert > Picture > pasted the URL to the image in the image library > then clicked the down-arrow on the Insert button and chose Link to File. Now when I publish it, I get an error that says:
Linked images are not supported by InfoPath Forms Services. To fix this problem, make the image a part of the form template. (Then it has a link to the image from the image library.)
Is it possible to link to an image file so if the image file is updated the forms will see the new image?
Thanks in advance,
Sonya

Thanks for the reply. So if I understand the info on the links above, to simply display an image that's not embedded in my InfoPath form, I have to create a Rich Text Box in the form, add a Receive data connection to a Picture Library on SharePoint, add
a Loading Event to the InfoPath form template and edit/paste C# code (because I only want to display one image from the image library and not a repeating table like the example in the article above), then edit and add more blocks of C# code to an "addImageToTable"
function, save/build/publish the form, then perform an "administrator-approved form template deployment" on the server? lol, all of that seems excessive just to display a non-embedded image. I'll need to decide if I want to fool with that since the logos don't
change very often.

To turn on my ipod, I get an image of connection to iTunes, but when you update iTunes, nothing happens. I restarted the iPod manually several times peero still appears the same image. how I can make it work?

to turn on my ipod, I get an image of connection to iTunes, but when you update iTunes, nothing happens. I restarted the iPod manually several times peero still appears the same image. how I can make it work?

Restore the ipod

Why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

why is it when i download the software update for iphone an error pops out when downloading is finish and processing file is being done...i've already tried several time but still the same result.

Disasble the computer's security software during the download and update.

Adobe Flash Template pop up box all the same info

ello there,
I have downloaded a flash website template which i'm modifying but i'm stuck!
On the About Us and Services pages there is a link to open up a pop up box. This works fine but for some reason if I change the text in one section, for instance the "our team" pop up box text the pop up box on the Services page "read more" and "paranormal info" box has the same text displayed.
I can't seem to find where to change the text for each box individually. If you visit http://kitcherside.com/kpi you can see what I mean.
I've uploaded the .fla file to the server also if someone is kind enough to have a look for me and point me in the right direction. You can download this from: http://kitcherside.com/kpi/25509.fla or http://kitcherside.com/kpi/25509.zip
I have everything else under control, this is just the final piece that's playing hard ball!
Thank you in advance for any assistance you're able to provide.
General Zod

I made an effort to look through that template. I hope that was free. It embodies nearly every aspect of what gives the template market a bad name. There is no organization to the content. There are no notes to explain the structure. None of the actionscript is commented. Absolutely nothing in the entire file has a useful name.
All of that aside, the problem with the various pop out object's having the same text content is most likely because either each pop out is made from the same movieClip, or one or more of the movieClips inside this object are the same clips. Where those clips are in the Library is anybody's guess.
Sorry that I couldn't be more help.

Can I print several different pics of the same size on one shee of papert?

Hi,
I should like to print a group of several different pics of the same size & resolution on one sheet of (A4) paper eg 6 family photos. There doesn't seem to be a template for this - just two choices of format (both with one large and a few smaller format) and there is no 'Printer' pop up menu.
I tried to laboriously copy pics to a two column works word processing document (after resizing in a different one so that they would fit in the columns). This is time consuming and when down sizing the pics lose resolution!
Maybe I can download templates somewhere on the apple site as suggested by apple care but I couldn't find out where. Maybe there is a possibility of doing some contact prints?
Any help much appreciated - many thanks - John

Select the 6 photos you want printed in the iPhoto Library or Album window.
Choose File->Print.
In the Print dialog box, Select the paper size in the Paper popup menu.
In the Style popup menu, select N-Up.
In the Photos per page popup select 6.
The preview should show what you'll get. I hope its what you wanted.
Message was edited by: Thomas Emmerich

Dimmed pop-up box display

I'm trying to figure out how to do this in DW4.
http://forums.adobe.com/message/3926993#3926993
See link above and click on any of the images; see how the browser screen goes a little dark and the image displays with an X to close it? I want to do this same thing but be able to play a Flash video in the pop-up box.
Can someone help me with this in DW4?
Thanks.

As you can see from the following image, there is a problem with the JS.
Try placing the document and the supporting files into the root directory. If that works go here for more info http://www.clearbox.hu.
It may be that you have to fiddle with the path in clearbox.js
Incidently, it works fine in IE9
Gramps

I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password.

I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password. I have tried my own IMAC password but to no avail. The printer also shows a pop-up box stating 'awaiting authentication.
Any help appreciated

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted!

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!

I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps.

Newly created images will not display in Firefox 8 for Mac. Same images appear in other browsers. Why?

1. Specific new images are uploaded but will not display in Firefox 8 on my Mac with OS 10.6.8. (Does appear in other browsers, e.g., Chrome and Opera, and appears on Firefox 8 for PC.) Also, other images on the page display.
2. I have cleared cache, cookies, etc., in Recent History, and restarted both application and computer.
3. I've tried creating GIF, JPG and PNG, but none show on the page in Firefox on my Mac. I can see the offending image in other browsers such as Chrome on the same computer, and on Firefox on PC. Offending pages are in both PHP and HTML: http://www.brookfieldcivic.org/advertisers.php and http://www.brookfieldcivic.org/advertising_freedom_montessori.html
Image links: http://www.brookfieldcivic.org/images/advertisers/freedom.png and http://www.brookfieldcivic.org/images/advertisers/Freedom_Montessori_bizcard.jpg

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

How can I make different catalogs from the same image

How can I make different catalogs from the same image where that image has been changed in some way between the catalogs. For instance if I wanted to have a catalogs for cropped images and have 3 catalogs one for 4x6 , 5x7 and 8x10 cropping. When I tried this , if I changed a file in one catalog that same image in the other would change also.

Do not confuse the creation of the crops and the display in collections per crop ratio.
Of course one virtual copy (VC) per crop ratio is needed. If the same image should be cropped in all 3 mentioned ratios there would be 3 VCs.
The OP asked how to have/see a set of same-crop-ratios.
After having created the virtual copies for whatever crop ratio he wants, the way to display this result in the fashion asked for is via smart collections, provided they can be found. Without a plugin the naming of the VC with the crop ratio applied is a straight way to achieve that.
IF the wish is to get new crops automatically added. (See my answers 2+3)
IF the wish is to creat static collections per crop ratio for a certain set of images, I'd go as follows:
1. Select all images you want to have cropped in that way,.
2. With this selection click on the + to add another collection and fill the dialog box like this:
Then navigate into this newly created selection and perform the 4x6 crop - according to taste individually or by synchronizing the first crop.
Cornelia

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
See: Keywords or ratings are applied only to one of the selected images - why?
Uncheck the little square button with the "1".

White box behind transparent images with drop shadow in InDesign CC 2014 (v.10) but not in InDesign CC (v.9)

Hi all,
Please can you help? No matter what settings I use in my print options in InDesign CC 2014 (v.10), ALL transparent images with a drop shadow are printing with a white box behind the image. If I remove the drop shadow, all prints fine. I know this is an old issue that happens with ID sometimes but I have been lucky enough to never have had it happen to me before! (All images are regular flattened TIFF images with clipping paths).
Also, feathered edges are not printing correctly and are sharp instead of feathered.
When I export the document to IDML and open it up in InDesign CC (v.9) all prints perfectly with no white boxes and feathered edges prints perfectly as well. I have compared all of the print settings (including color management, transparency flattener, etc.) between both versions and they are exactly the same. I am printing to a Xerox color laser printer. Can anyone offer any advice?
Thank you so much,
Christine

Okay...false alarm! It turns out that the issue was with my PRINTER settings (the settings you customize after hitting the “Printer” button at the bottom of the Print dialogue box in ID CC. I thought I had triple checked this but it seems there was one setting I missed earlier…adjusting the print brightness seemed to cause the issue. SO GLAD to know it was not InDesign…20 or so sheets/prints later….and thankful to know what was causing the issue! Thank you so much Steve for helping at any rate:) Much appreciated:)

Outlook 2010 authentication pop up box won't go away

After we applied the latest round of Windows Updates to our guinea pig workstations, we discovered that one of them caused something to break in Outlook 2010. We are set to use AD auto detect authentication on a local Exchange 2007 server. The pop
up window has varied, and nothing we have done has fixed it, not even uninstalling all the patches. (After the first workstation had the bug, I installed the patches one at a time and determined its KB2553248 that breaks it.)
Mail flows normally and we can send and receive without any problems. The pop up box can be sent to the back but cannot be minimized.
Mine says:
Windows Security
Microsoft Outlook
Connecting to (my AD email address)
The OK button is grayed out. Hitting the Cancel button breaks the connection to Exchange, and causes "Connected to Microsoft Exchange" to change over to "Need Password" on the bottom toolbar. Clicking "Need Password" logs me in within a few seconds
without any further prompting.... but within five minutes the pop up box is back.
On the other user's computer, the pop up box says:
Windows Security
Please Insert a Smart Card
and prompts for credentials if she hits OK. Like my pop up, the window can be ignored and mail flows normally. If she hits cancel, her connection to Exchange breaks until she hits "Need Password" at which point she's logged right back in again.
Interestingly, her Outlook was never configured to authenticate with a smart card. Like mine, it's set to Auto Detect connection type and to configure with the Windows AD login information.
We're holding off deployment of KB2553248 until we have a fix for this. Although it does not impede mail flow it's annoying as heck, and our clients that use Outlook (all 500ish of them...) are sure to click Cancel and break their connection to Exchange
without knowing to click the Need Password again.
How can we hide this pop up box?

OK...update on my issue (which is now RESOLVED!!!) since other people may did what I did.
I looked at the following link:
http://demazter.wordpress.com/2010/02/09/outlook-continually-prompting-for-username-and-password-2/
None of the above worked...even the kerberos method.
OL 2010 pop up box didn't say anything about connecting to where. So I looked closely at the popup box for OL 2007...keeps on saying connecting to mail.company.com. I was wondering why OL was trying to go outside instead of exch2010.domain.local
even though my account settings/profile is set to exch2010.domain.local.
As I was reading an article on SCP and how to locate it using adsiedit (which I couldn't figure out how),
http://blogs.msdn.com/b/douggowans/archive/2007/06/28/serviceconnectionpoints.aspx
This line in the blog got me thinking:
This url can be changed using the set-clientaccessserver cmdlet with the parameter -AutodiscoverServiceInternalURI.
That InternalURI got me thinking. When I looked at a txtfile that I jolted down and saved of what I did during the install of Exch 2010,
Set-ClientAccessServer -Identity "exch2010" –AutodiscoverServiceInternalURI
https://mail.company.com/autodiscover/autodiscover.xml
Set-WebServicesVirtualDirectory -Identity "exch2010\EWS (Default Web Site)" –InternalUrl
https://mail.company.com/EWS/Exchange.asmx
Set-OABVirtualDirectory -Identity “exch2010\OAB (Default Web Site)” -InternalURL
https://mail.company.com/OAB
I figured, let's try changing them to:
Set-ClientAccessServer -Identity "exch2010" –AutodiscoverServiceInternalURI
https://exch2010/autodiscover/autodiscover.xml
Set-WebServicesVirtualDirectory -Identity "exch2010\EWS (Default Web Site)" –InternalUrl
https://exch2010/EWS/Exchange.asmx
Set-OABVirtualDirectory -Identity “exch2010\OAB (Default Web Site)” -InternalURL
https://exch2010/OAB
I entered those commands in EMS and executed them...then I loaded up OL 2010 and OL 2007. It's been 30 min and nothing has popped up!!!
Silly me..I think why I did mail.company.com was that I was following a couple of guides that were posted out there on the internet on exchange 2010 and they just entered mail.company.com into there. But I think their guides are for networks where
the internal domain and external domain are the same. ie company.com for both insdie and outside.
I am going to install KB2553248 back onto my Win 7/OL 2010 workstation and see if that breaks it.

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within

Do I need to export multiple sizes for all standard print sizes? i.e.Say I crop the image in LR to 6'5" x 9' to fit within an 11" x 14" (overall) mat of a framed print.. Now let's say I want to reprint that same image in a 12" x 16" size ... to fit within a mat of with overall size of 20" x 24"? Or will the 1st export be "locked" at 6.5" X 9" (proportionately)?

So, for the first one Export it cropped to 6.5 x 9 - and in the Export Dialog box there is a capability to rename the file for exported output - which would allow you to add something like the crop or intention to the base name of the file. e.g. for _IMG0846.nef - setup the output filename to _IMG0846-65x9 for 11x14.jpg and output it at, say 300 or 360 dpi. So, it has a unique name and purpose in your output folder.
For best results, now, re-crop the picture in LR - just open the crop [R] dialog again, reframe the image to the new ratio, 12x16 and Export again - with an adjustment to the filename. e.g. _IMG0846-12x16 for 20x24.jpg
So, now you have two clearly identified image files in your output area and you can provide those to whomever is printing for you, etc. Discard them when you're done since you always have the original to return to to re-frame again as necessary.
This way you get output sharpening and resolution (in pixels) optimized for your output print size. Maybe not super important for smallish prints-but more important for larger ones. Output at 100 quality.

Several pop up boxes on same image

Similar Messages

Maybe you are looking for