SFTP FTP Adapter work around

Hi guys,
Is there anyway to get XI to support sftp? as our company policy does not allow unsecure ftp connections. I don't no know were to start looking, any idea?
Thanks,
Jan

Hi Jan,
I Hope you can go with FTPS. Check the below link:
/people/rajasekhar.reddy14/blog/2010/04/13/how-to-configure-ftps-in-file-adapter
Also check the below links: PGP encryption & decryption
http://weblogs.sdn.sap.com/cs/blank/view/wlg/22415
If you are looking for a tool for PGP ,you can have a look at the links below
http://www.aedaptive.com/index.php/solutions
http://www.aedaptive.com/index.php/solutions/pgp-for-sap-netweaver
If you are planning to develop adapter module or want to evaluate which one is better ,please refer following posts .
/people/dijesh.tanna/blog/2008/09/15/sap-pi-integrating-macafee-e-business-server-with-sap-pi-70-for-pgp-encryptiondecryption
Encrypting a file using PGP
Thanks,

Similar Messages

What is the maximum filesize for a FTP Adapter?

I have xml files with 1000's of records to read in. The file size can range anywhere from a few MB up to ~100MB. Most of them are about 50 MB.
The FTP adapter works when I have a small file, but with larger ones it apparently times out. Once it runs into a big file like this, it won't process any more files until I restart the process. It doesn't show any faults or even any record of a running instance in the BPEL Console, so I have no idea specifically when it breaks. I uploaded a 10MB file to my ftp server and left it for a half hour, but nothing showed up, so I'm assuming it's broken rather than just taking a long time.
What is the maximum file size for a FTP adapter? Can I change this somewhere? I looked in the ...\application-deployments\default\FtpAdapter\oc4j-ra.xml file but couldn't find any settings to change.

Well no luck on my end and it doesn't look like anybody else has any ideas either. This thread Re: FTP Adapter, Java Embedding, ... says that if you can't get the functionality you need out of the default one, you should write your own FTP adapter in JCA. I looked at JCA and would like to write a simple polling adapter and then put all my FTP code in embedded java.
Can somebody explain how I could achieve the basic FTP Adapter polling functionality in JCA? I'm having difficulty figuring out how to have an ongoing polling process without instantiating a BPEL process itself, like the existing FTP adapter does. I don't want to set off on writing my own adapter if it's going to be a much larger undertaking than I have time for.
Also, is the source code open for the default FTP adapter? It would be great if I could just modify the few things I need to change rather than write one from scratch.

Sender FTP Adapter, text mode should convert source file?

Hi !
We have a Unix file system where systems and people drop files to be captured by XI. XI runs also on another Unix system.
We configured the Sender FTP comm channel from XI to use the TEXT mode, to have converted the captured file to Unix TEXT (eol = 0x0A), no matter the format of the file used to transfer the source file to the XI polling folder.
But we noticed that TEXT or BINARY modes in sender FTP adapter works all the same, like binary.
What are we doing wrong?
Thanks,
Matias

No. to see the difference put a gif and give txt in file adapter you will get an error for the same file u use binary it works.
their is difference b/w these . if you use special characters like european then you need to use UTF-8 or UTF-16 or bigInidan if it is binary then you output will junk charaters for these sysmobls
Message was edited by:
Sreeram Reddy

FTP Adapter enconding

Hi,
I would like to have the output encoding as "ISO-8859-1" in the FTP Adapter working with XML.
I already put the patch to correct this (BUG 2375248). The adapter starts well, but when the adapters
is processing the message it appears the folowing error:
Â«
java.lang.NullPointerException
at oracle.oai.agent.adapter.technology.TechBridge.messageReceived(TechBr
idge.java:871)
at oracle.oai.agent.client.SmartQueueDispatcher.run(SmartQueueDispatcher
.java:451)
at java.lang.Thread.run(Thread.java:484).
Â»
What can i do to resolve that?
I already put the latest patch to Oracle Interconnect 9.0.2 (release 2)
Thanks in advanced,
Trindade
PS: Please reply to [email protected], tx

Problem: the FTP adapter doesn't process inbound
files...I was hoping you (or somebody else) resolved this issue. I am new to Oracle InterConnect and having some pretty good success with the AQ and DB Adapters but having no luck getting the FTP Adapter to pick up a file. Thanks!
Kurt Schwartz
BearingPoint, Inc.

Issue in SFTP configuration in FTP adapter (Oracle SOA 10.1.3.3)

Hi,
We are trying to connect FTP adapter to SFTP server and have made all the necessary configuration changes required to $ORACLE_HOME/j2ee/oc4j_soa/application-deployments/default/FtpAdapter/oc4j-ra.xml. Following properties are updated in this file.
<config-property name="host" value="sftp.server.ip.address"/>
<config-property name="port" value="22"/>
<config-property name="username" value="userID"/>
<config-property name="password" value="passwd"/>
<config-property name="useSftp" value="true"/>
<config-property name="authenticationType" value="publickey"/>
<config-property name="preferredKeyExchangeAlgorithm" value="diffie-hellman-group1-sha1"/>
<config-property name="preferredCompressionAlgorithm" value="none"/>
<config-property name="preferredDataIntegrityAlgorithm" value="hmac-md5"/>
<config-property name="preferredPKIAlgorithm" value="ssh-rsa"/>
<config-property name="privateKeyFile" value="/home0103/vchander/sftptest/id_rsa"/>
<config-property name="preferredCipherSuite" value="blowfish-cbc"/>
<config-property name="transportProvider" value="socket"/>
Restarted the SOA server after configuring these settings. Created a BPEL process using this FTP adapter to pick a CSV file from a SFTP location and deployed the process successfully on the BPEL server. But FTP adapter is not picking the file from SFTP location and in BPEL log.xml we can see following errors:
<MSG_TEXT>JCA: ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
at oracle.tip.adapter.ftp.SshImpl.SSHSessionImpl.<init>(SSHSessionImpl.java:153)
at oracle.tip.adapter.ftp.SshImpl.SshImplFactory.getSshImpl(SshImplFactory.java:24)
at oracle.tip.adapter.ftp.SFTPManagedConnection.setupSftpConnection(SFTPManagedConnection.java:134)
at oracle.tip.adapter.ftp.SFTPManagedConnection.<init>(SFTPManagedConnection.java:64)
at oracle.tip.adapter.ftp.FTPManagedConnectionFactory.createManagedConnection(FTPManagedConnectionFactory.java:194)
at com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1377)
at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
at oracle.j2ee.connector.ConnectionPoolImpl$NonePoolingScheme.getManagedConnection(ConnectionPoolImpl.java:1211)
at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:785)
at com.evermind.server.connector.ApplicationConnectionManager.getConnectionFromPool(ApplicationConnectionManager.java:1575)
at com.evermind.server.connector.ApplicationConnectionManager.acquireConnectionContext(ApplicationConnectionManager.java:1520)
at com.evermind.server.connector.ApplicationConnectionManager.allocateConnection(ApplicationConnectionManager.java:1465)
at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateConnection(OracleConnectionManager.java:238)
at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(OracleConnectionManager.java:192)
at oracle.tip.adapter.ftp.FTPConnectionFactory.getConnection(FTPConnectionFactory.java:96)
at oracle.tip.adapter.ftp.SFTPAgent.preCall(SFTPAgent.java:984)
at oracle.tip.adapter.ftp.SFTPAgent.getFileList(SFTPAgent.java:316)
at oracle.tip.adapter.file.inbound.FileSource.getFileList(FileSource.java:199)
at oracle.tip.adapter.file.inbound.PollWork.pollFiles(PollWork.java:252)
at oracle.tip.adapter.file.inbound.PollWork.run(PollWork.java:142)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:797)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
It seems all SFTP server related settings are proper but still logs are saying it’s an issue with SFTP server settings. Also I am able to do SFTP successfully from UNIX prompt but the same settings are not working for SOA suite.
I would appreciate any inputs on the same.
Thanks in Advance,
Uday

Hi,
I am herewith attaching the complete log exceptions that are getting caught in log.xml for SFTP configuration.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.224-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>28</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210857159587:619</UNIQUE_ID><SEQ>20</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: JCAActivationAgent::init - Initializing the JCA activation agent, processId='bpel://localhost/default/TestSftpProcess~1.0/</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.225-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>28</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210857159587:619</UNIQUE_ID><SEQ>20</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: JCAActivationAgent::initiateInboundJcaEndpoint - Creating and initializing inbound JCA endpoint for:
process='bpel://localhost/default/TestSftpProcess~1.0/'
domain='default'
WSDL location='sfile.wsdl'
portType='Get_ptt'
operation='Get'
activation properties={portType=Get_ptt}
</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.229-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>28</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210857159587:619</UNIQUE_ID><SEQ>20</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Adapter Framework instance: OraBPEL - endpointActivation for portType=Get_ptt, operation=Get</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.330-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>28</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210857159587:619</UNIQUE_ID><SEQ>20</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: ENDPOINT ACTIVATION CALLED IN FTP ADAPTER</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.331-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>28</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210857159587:619</UNIQUE_ID><SEQ>20</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Adapter Framework instance: OraBPEL - successfully completed endpointActivation for portType=Get_ptt, operation=Get</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.373-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>20</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210856496827:172</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: The connection variable is null in postCall. This could be because of a call postCall w/o a preceeding call to preCall.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.373-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>20</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210856496827:172</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
     at java.lang.Throwable.<init>(Throwable.java:57)
     at java.lang.Throwable.<init>(Throwable.java:68)
     at javax.resource.ResourceException.<init>(ResourceException.java:49)
     at oracle.tip.adapter.api.exception.PCResourceException.<init>(PCResourceException.java:108)
     at oracle.tip.adapter.file.FileResourceException.<init>(FileResourceException.java:87)
     at oracle.tip.adapter.ftp.SshImpl.SSHSessionImpl.<init>(SSHSessionImpl.java:153)
     at oracle.tip.adapter.ftp.SshImpl.SshImplFactory.getSshImpl(SshImplFactory.java:24)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.setupSftpConnection(SFTPManagedConnection.java:134)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.<init>(SFTPManagedConnection.java:64)
     at oracle.tip.adapter.ftp.FTPManagedConnectionFactory.createManagedConnection(FTPManagedConnectionFactory.java:194)
     at com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1377)
     at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
     at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
     at oracle.j2ee.connector.ConnectionPoolImpl$NonePoolingScheme.getManagedConnection(ConnectionPoolImpl.java:1211)
     at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:785)
     at com.evermind.server.connector.ApplicationConnectionManager.getConnectionFromPool(ApplicationConnectionManager.java:1575)
     at com.evermind.server.connector.ApplicationConnectionManager.acquireConnectionContext(ApplicationConnectionManager.java:1520)
     at com.evermind.server.connector.ApplicationConnectionManager.allocateConnection(ApplicationConnectionManager.java:1465)
     at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateConnection(OracleConnectionManager.java:238)
     at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(OracleConnectionManager.java:192)
     at oracle.tip.adapter.ftp.FTPConnectionFactory.getConnection(FTPConnectionFactory.java:96)
     at oracle.tip.adapter.ftp.SFTPAgent.preCall(SFTPAgent.java:984)
     at oracle.tip.adapter.ftp.SFTPAgent.getFileList(SFTPAgent.java:316)
     at oracle.tip.adapter.file.inbound.FileSource.getFileList(FileSource.java:199)
     at oracle.tip.adapter.file.inbound.PollWork.pollFiles(PollWork.java:252)
     at oracle.tip.adapter.file.inbound.PollWork.run(PollWork.java:142)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
     at java.lang.Thread.run(Thread.java:797)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.382-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>20</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210856496827:172</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
     at java.lang.Throwable.<init>(Throwable.java:57)
     at java.lang.Throwable.<init>(Throwable.java:68)
     at javax.resource.ResourceException.<init>(ResourceException.java:49)
     at oracle.tip.adapter.api.exception.PCResourceException.<init>(PCResourceException.java:108)
     at oracle.tip.adapter.file.FileResourceException.<init>(FileResourceException.java:87)
     at oracle.tip.adapter.ftp.SshImpl.SSHSessionImpl.<init>(SSHSessionImpl.java:153)
     at oracle.tip.adapter.ftp.SshImpl.SshImplFactory.getSshImpl(SshImplFactory.java:24)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.setupSftpConnection(SFTPManagedConnection.java:134)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.<init>(SFTPManagedConnection.java:64)
     at oracle.tip.adapter.ftp.FTPManagedConnectionFactory.createManagedConnection(FTPManagedConnectionFactory.java:194)
     at com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1377)
     at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
     at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
     at oracle.j2ee.connector.ConnectionPoolImpl$NonePoolingScheme.getManagedConnection(ConnectionPoolImpl.java:1211)
     at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:785)
     at com.evermind.server.connector.ApplicationConnectionManager.getConnectionFromPool(ApplicationConnectionManager.java:1575)
     at com.evermind.server.connector.ApplicationConnectionManager.acquireConnectionContext(ApplicationConnectionManager.java:1520)
     at com.evermind.server.connector.ApplicationConnectionManager.allocateConnection(ApplicationConnectionManager.java:1465)
     at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateConnection(OracleConnectionManager.java:238)
     at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(OracleConnectionManager.java:192)
     at oracle.tip.adapter.ftp.FTPConnectionFactory.getConnection(FTPConnectionFactory.java:96)
     at oracle.tip.adapter.ftp.SFTPAgent.preCall(SFTPAgent.java:984)
     at oracle.tip.adapter.ftp.SFTPAgent.getFileList(SFTPAgent.java:316)
     at oracle.tip.adapter.file.inbound.FileSource.getFileList(FileSource.java:199)
     at oracle.tip.adapter.file.inbound.PollWork.pollFiles(PollWork.java:252)
     at oracle.tip.adapter.file.inbound.PollWork.run(PollWork.java:142)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
     at java.lang.Thread.run(Thread.java:797)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.383-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>20</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210856496827:172</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
     at java.lang.Throwable.<init>(Throwable.java:57)
     at java.lang.Throwable.<init>(Throwable.java:68)
     at javax.resource.ResourceException.<init>(ResourceException.java:49)
     at oracle.tip.adapter.api.exception.PCResourceException.<init>(PCResourceException.java:108)
     at oracle.tip.adapter.file.FileResourceException.<init>(FileResourceException.java:87)
     at oracle.tip.adapter.ftp.SshImpl.SSHSessionImpl.<init>(SSHSessionImpl.java:153)
     at oracle.tip.adapter.ftp.SshImpl.SshImplFactory.getSshImpl(SshImplFactory.java:24)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.setupSftpConnection(SFTPManagedConnection.java:134)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.<init>(SFTPManagedConnection.java:64)
     at oracle.tip.adapter.ftp.FTPManagedConnectionFactory.createManagedConnection(FTPManagedConnectionFactory.java:194)
     at com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1377)
     at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
     at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
     at oracle.j2ee.connector.ConnectionPoolImpl$NonePoolingScheme.getManagedConnection(ConnectionPoolImpl.java:1211)
     at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:785)
     at com.evermind.server.connector.ApplicationConnectionManager.getConnectionFromPool(ApplicationConnectionManager.java:1575)
     at com.evermind.server.connector.ApplicationConnectionManager.acquireConnectionContext(ApplicationConnectionManager.java:1520)
     at com.evermind.server.connector.ApplicationConnectionManager.allocateConnection(ApplicationConnectionManager.java:1465)
     at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateConnection(OracleConnectionManager.java:238)
     at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(OracleConnectionManager.java:192)
     at oracle.tip.adapter.ftp.FTPConnectionFactory.getConnection(FTPConnectionFactory.java:96)
     at oracle.tip.adapter.ftp.SFTPAgent.preCall(SFTPAgent.java:984)
     at oracle.tip.adapter.ftp.SFTPAgent.getFileList(SFTPAgent.java:316)
     at oracle.tip.adapter.file.inbound.FileSource.getFileList(FileSource.java:199)
     at oracle.tip.adapter.file.inbound.PollWork.pollFiles(PollWork.java:252)
     at oracle.tip.adapter.file.inbound.PollWork.run(PollWork.java:142)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
     at java.lang.Thread.run(Thread.java:797)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.383-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>20</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210856496827:172</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
     at java.lang.Throwable.<init>(Throwable.java:57)
     at java.lang.Throwable.<init>(Throwable.java:68)
     at javax.resource.ResourceException.<init>(ResourceException.java:49)
     at oracle.tip.adapter.api.exception.PCResourceException.<init>(PCResourceException.java:108)
     at oracle.tip.adapter.file.FileResourceException.<init>(FileResourceException.java:87)
     at oracle.tip.adapter.ftp.SshImpl.SSHSessionImpl.<init>(SSHSessionImpl.java:153)
     at oracle.tip.adapter.ftp.SshImpl.SshImplFactory.getSshImpl(SshImplFactory.java:24)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.setupSftpConnection(SFTPManagedConnection.java:134)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.<init>(SFTPManagedConnection.java:64)
     at oracle.tip.adapter.ftp.FTPManagedConnectionFactory.createManagedConnection(FTPManagedConnectionFactory.java:194)
     at com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1377)
     at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
     at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
     at oracle.j2ee.connector.ConnectionPoolImpl$NonePoolingScheme.getManagedConnection(ConnectionPoolImpl.java:1211)
     at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:785)
     at com.evermind.server.connector.ApplicationConnectionManager.getConnectionFromPool(ApplicationConnectionManager.java:1575)
     at com.evermind.server.connector.ApplicationConnectionManager.acquireConnectionContext(ApplicationConnectionManager.java:1520)
     at com.evermind.server.connector.ApplicationConnectionManager.allocateConnection(ApplicationConnectionManager.java:1465)
     at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateConnection(OracleConnectionManager.java:238)
     at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(OracleConnectionManager.java:192)
     at oracle.tip.adapter.ftp.FTPConnectionFactory.getConnection(FTPConnectionFactory.java:96)
     at oracle.tip.adapter.ftp.SFTPAgent.preCall(SFTPAgent.java:984)
     at oracle.tip.adapter.ftp.SFTPAgent.getFileList(SFTPAgent.java:316)
     at oracle.tip.adapter.file.inbound.FileSource.getFileList(FileSource.java:199)
     at oracle.tip.adapter.file.inbound.PollWork.pollFiles(PollWork.java:252)
     at oracle.tip.adapter.file.inbound.PollWork.run(PollWork.java:142)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
     at java.lang.Thread.run(Thread.java:797)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.383-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>20</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210856496827:172</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
     at java.lang.Throwable.<init>(Throwable.java:57)
     at java.lang.Throwable.<init>(Throwable.java:68)
     at javax.resource.ResourceException.<init>(ResourceException.java:49)
     at oracle.tip.adapter.api.exception.PCResourceException.<init>(PCResourceException.java:108)
     at oracle.tip.adapter.file.FileResourceException.<init>(FileResourceException.java:87)
     at oracle.tip.adapter.ftp.SshImpl.SSHSessionImpl.<init>(SSHSessionImpl.java:153)
     at oracle.tip.adapter.ftp.SshImpl.SshImplFactory.getSshImpl(SshImplFactory.java:24)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.setupSftpConnection(SFTPManagedConnection.java:134)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.<init>(SFTPManagedConnection.java:64)
     at oracle.tip.adapter.ftp.FTPManagedConnectionFactory.createManagedConnection(FTPManagedConnectionFactory.java:194)
     at com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1377)
     at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
     at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
     at oracle.j2ee.connector.ConnectionPoolImpl$NonePoolingScheme.getManagedConnection(ConnectionPoolImpl.java:1211)
     at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:785)
     at com.evermind.server.connector.ApplicationConnectionManager.getConnectionFromPool(ApplicationConnectionManager.java:1575)
     at com.evermind.server.connector.ApplicationConnectionManager.acquireConnectionContext(ApplicationConnectionManager.java:1520)
     at com.evermind.server.connector.ApplicationConnectionManager.allocateConnection(ApplicationConnectionManager.java:1465)
     at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateConnection(OracleConnectionManager.java:238)
     at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(OracleConnectionManager.java:192)
     at oracle.tip.adapter.ftp.FTPConnectionFactory.getConnection(FTPConnectionFactory.java:96)
     at oracle.tip.adapter.ftp.SFTPAgent.preCall(SFTPAgent.java:984)
     at oracle.tip.adapter.ftp.SFTPAgent.getFileList(SFTPAgent.java:316)
     at oracle.tip.adapter.file.inbound.FileSource.getFileList(FileSource.java:199)
     at oracle.tip.adapter.file.inbound.PollWork.pollFiles(PollWork.java:252)
     at oracle.tip.adapter.file.inbound.PollWork.run(PollWork.java:142)
     at oracle.tip.adapter.fw.jca.work.WorkerJob.go(WorkerJob.java:51)
     at oracle.tip.adapter.fw.common.ThreadPool.run(ThreadPool.java:272)
     at java.lang.Thread.run(Thread.java:797)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.384-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>20</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210856496827:172</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Poller raising Alert for exception : ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server.
Please ensure hostname and port specified to login to the server are correct.
</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.414-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>29</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210857170765:622</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>wsdl location : http://ios0103e.idc.company.org:8888/orabpel/default/TestSftpProcess/1.0/TestSftpProcess?wsdl resolved location :http://ios0103e.idc.company.org:8888/orabpel/default/TestSftpProcess/1.0/TestSftpProcess?wsdl</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:02.968-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>13</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210856395891:4</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: The connection variable is null in postCall. This could be because of a call postCall w/o a preceeding call to preCall.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:03.044-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="WARNING"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>18</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210856496358:166</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: The connection variable is null in postCall. This could be because of a call postCall w/o a preceeding call to preCall.</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-05-15T09:13:03.069-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="NOTIFICATION"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>ios0103e.idc.company.org</HOST_ID>
<HOST_NWADDR>10.11.52.102</HOST_NWADDR>
<MODULE_ID>esb.console</MODULE_ID>
<THREAD_ID>29</THREAD_ID>
<USER_ID>oraeintd</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>10.11.52.102:51559:1210857170765:622</UNIQUE_ID><SEQ>15</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Commit starting +++++++++++++++</MSG_TEXT>
Any help would be highly appreciated.

SFTP with FTP Adapter - Missing class: com.maverick.ssh.SshTransport

Hi,
I am trying to use the SFTP with FTP Adapter for a project requirement.
I have followed the steps as mentioned in the below link
http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_file.htm#CACDFFFB
Have configured the oc4j_ra.xml file, but after creating a sample BPEL process with the FTP adapter, got this error message in the log file.
<2010-04-12 11:21:16,493> <FATAL> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Uncaught exception oracle.classloader.util.AnnotatedNoClassDefFoundError in JCA-work-instance:FTP Adapter-4 - cause:
Missing class: com.maverick.ssh.SshTransport
Dependent class: oracle.tip.adapter.ftp.SshImpl.SshImplFactory
Loader: FtpAdapter:0.0.0
Code-Source: /D:/product/10.1.3.1/OracleAS_1/j2ee/home/connectors/FtpAdapter/FtpAdapter/ftpAdapter.jar
Configuration: <code-source> in D:\product\10.1.3.1\OracleAS_1\j2ee\home\connectors\FtpAdapter\FtpAdapter
The missing class is not available from any code-source or loader in the system.
I tried getting a trial licencse for the maverick SSH tool from http://www.3sp.com/requestEvaluation.do?productCode=MAVERICK as discussed in one of the threads, but it redirects to http://www.barracudanetworks.com/ns/products/sslvpn_overview.php
Could anyone please help in this?
OR
Provide steps on how to use SFTP with FTP Adapter.
Regards,
Varun

Hi,
Thanks for the reply.
As per client's requirement, we shouldn't be using java service for this functionality.
And as you said, the oracle adapters are not taking anywhere, but guess have no other choice..
Cheers,
Varun

FTP adapter to connect to SFTP server that sits outside of firewall

We have a firewall between soa server and ftp server. There is no proxy server configured on the firewall. We tried two configuration as listed below both were not working. ANy guidance would be greatly appreciated! Thanks!
We are able to do sftp through command prompt from soa server to ftp server.
Kathar
First configuration:
host
port - 22
username
password
sftp - true
transport mode - socket
authenticationType - PASSWORD
Error Received
[2013-05-23T09:05:27.619-10:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [tid: Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms\n] [userId: <anonymous>] [ecid: 5fb2a7b48dd0cab4:e4632bf:13ec4b1184d:-8000-000000000005a46f,1:30571] [APP: soa-infra] FTP Adapter FTPTestProject [[
BINDING.JCA-11445
The SSH API threw an exception.
The SSH API threw an exception.
The SSH API threw an exception.
Maverick has not been setup properly. Please correct the setup.
     at oracle.tip.adapter.ftp.SshImpl.SSHSessionImpl.setUpPasswordSocketConnection(SSHSessionImpl.java:206)
     at oracle.tip.adapter.ftp.SshImpl.SSHSessionImpl.<init>(SSHSessionImpl.java:128)
     at oracle.tip.adapter.ftp.SshImpl.SshImplFactory.getSshImpl(SshImplFactory.java:26)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.setupSftpConnection(SFTPManagedConnection.java:154)
     at oracle.tip.adapter.ftp.SFTPManagedConnection.<init>(SFTPManagedConnection.java:67)
     at oracle.tip.adapter.ftp.FTPManagedConnectionFactory.createManagedConnection(FTPManagedConnectionFactory.java:180)
     at weblogic.connector.security.layer.AdapterLayer.createManagedConnection(AdapterLayer.java:803)
     at weblogic.connector.outbound.ConnectionFactory.createResource(ConnectionFactory.java:91)
     at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1310)
     at weblogic.common.resourcepool.ResourcePoolImpl.reserveResourceInternal(ResourcePoolImpl.java:419)
     at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:344)
     at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:323)
     at weblogic.connector.outbound.ConnectionPool.reserveResource(ConnectionPool.java:620)
     at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:317)
     at weblogic.connector.outbound.ConnectionManagerImpl.getConnectionInfo(ConnectionManagerImpl.java:380)
     at weblogic.connector.outbound.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:129)
     at oracle.tip.adapter.ftp.FTPConnectionFactory.getConnection(FTPConnectionFactory.java:102)
     at oracle.tip.adapter.ftp.SFTPAgent.preCall(SFTPAgent.java:1192)
     at oracle.tip.adapter.ftp.SFTPAgent.validateInputDir(SFTPAgent.java:758)
     at oracle.tip.adapter.ftp.inbound.FTPSource.revalidatePollingError(FTPSource.java:1357)
     at oracle.tip.adapter.file.inbound.PollWork.onAlert(PollWork.java:476)
     at oracle.tip.adapter.file.inbound.PollWork.run(PollWork.java:357)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:184)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: com.maverick.ssh.SshException: Failed to negotiate a transport component [aes192-cbc] [aes256-ctr]
     at com.maverick.ssh2.TransportProtocol.A(Unknown Source)
     at com.maverick.ssh2.TransportProtocol.C(Unknown Source)
     at com.maverick.ssh2.TransportProtocol.processMessage(Unknown Source)
     at com.maverick.ssh2.TransportProtocol.startTransportProtocol(Unknown Source)
     at com.maverick.ssh2.Ssh2Client.connect(Unknown Source)
     at com.maverick.ssh.SshConnector.connect(Unknown Source)
     at oracle.tip.adapter.ftp.SshImpl.SSHSessionImpl.setUpPasswordSocketConnection(SSHSessionImpl.java:194)
     ... 24 more
Second configuration:
host
port - 22
username
password
sftp - true
transport mode - http
authenticationType - PASSWORD
Below error indicates it expects proxy configuration, but we don't have any
Error
Proxy Host: Proxy Port: -1 Proxy UserName: Connection Type: http
[2013-05-23T09:00:42.837-10:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [tid: Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms\n] [userId: <anonymous>] [ecid: 5fb2a7b48dd0cab4:e4632bf:13ec4b1184d:-8000-0000000000059c8e,1:30566] [APP: soa-infra] FTP Adapter FTPTestProject Exception while setting up session
[2013-05-23T09:00:42.837-10:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [tid: Workmanager: , Version: 0, Scheduled=false, Started=false, Wait time: 0 ms\n] [userId: <anonymous>] [ecid: 5fb2a7b48dd0cab4:e4632bf:13ec4b1184d:-8000-0000000000059c8e,1:30566] [APP: soa-infra] FTP Adapter FTPTestProject [[
BINDING.JCA-11443
Adapter internal error.
Adapter internal error.
The adapter has become unstable. This could be because of incorrect parameters supplied to the adapter. The parameter: [Ljava.lang.String;@19062d06 had value: [Ljava.lang.String;@19062d0c
Please make sure that SFTP has been setup correctly.
Edited by: Kathar on May 23, 2013 12:25 PM

Hi,
We have a firewall between soa server and ftp server. There is no proxy server configured on the firewall...
We are able to do sftp through command prompt from soa server to ftp server...Some facts above look discordant... My understanding is you have to use http to access a ftp server running outside a firewall and socket if it's inside a firewall...
However, you seem to have access with socket from FtpAdapter and also are able to do sftp via command prompt (without using a proxy!)... Those facts make me believe that the connection is actually not going through the firewall... Is the Ftp server in the internal network? Is the soa server running on Windows or Linux?
Recheck your configuration according to steps on the document bellow and do some further investigation to assure that the connection from soa server to the ftp server is actually going through the firewall... Ask for the network administrator to close the SFTP port on the firewall and see if you still can connect to it...
http://docs.oracle.com/cd/E28280_01/integration.1111/e10231/adptr_file.htm#CACDFFFB
Cheers,
Vlad

Using SFTP with FTP Adapter: The SSH API threw an exception.

Our SOA suite veriosn is 10.1.3.4.
We have to get the file from SFTP server and put it on the SOA Server. (SFTP and SOA server are running in different machine)
If Incoming file and outgoing file directory is located in SFTP server..GET and PUT operations works fine.
but if I give Incoming File location = <SFTP location>... and Outgoing file location = <SOA server location>... I get the below error...
<2011-01-28 01:45:51,043> <ERROR> <default.collaxa.cube.ws> <AdapterFramework::Outbound> file:/C:/OracleAS_1/bpel/domains/default/tmp/.bpel_FTPTest_1.0_f57b8d368277e2d025bfbd2992350d66.tmp/put.wsdl [ Put_ptt::Put(opaque) ] - Could not invoke operation 'Put' against the 'FTP Adapter' due to:
ORABPEL-11445
The SSH API threw an exception.
The SSH API threw an exception.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
<2011-01-28 01:45:51,043> <ERROR> <default.collaxa.cube.ws> <AdapterFramework::Outbound> file:/C:/OracleAS_1/bpel/domains/default/tmp/.bpel_FTPTest_1.0_f57b8d368277e2d025bfbd2992350d66.tmp/put.wsdl
[ Put_ptt::Put(opaque) ] - Rolling back JCA LocalTransaction
<2011-01-28 01:45:51,043> <ERROR> <default.collaxa.cube.ws> <WSIFInvocationHandler::invoke> Fault happened: file:/C:/OracleAS_1/bpel/domains/default/tmp/.bpel_FTPTest_1.0_f57b8d368277e2d025bfbd2992350d66.tmp/put.wsdl [ Put_ptt::Put(opaque) ] - WSIF JCA Execute of operation 'Put' failed due to: The SSH API threw an exception.
The SSH API threw an exception.
; nested exception is:
ORABPEL-11445
The SSH API threw an exception.
The SSH API threw an exception.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
anyone can offer any help?
Thanks,
AB
Edited by: AB on Jan 28, 2011 3:38 AM

Hi,
Thanks for the reply.
As per client's requirement, we shouldn't be using java service for this functionality.
And as you said, the oracle adapters are not taking anywhere, but guess have no other choice..
Cheers,
Varun

FTP adapter settings for SFTP connection

We are trying to connect an FTP adapter to a SFTP server.
After solving the license problem with Maverick/3SP class, the error we get now is:
"The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-11447
Error in establishing a session with SSH Server..
Unable to establish a session with the server."
Have done all steps required, set up the oc4j-ra.xml file, adding the license file to the jar, etc. The settings are as usual (following the instructions in the manual): password authentication, port 22, etc.
Taking a look at the SFTP/OpenSSH server log, we can see that OAS tries to connect, but the last log entry is "fatal: Read from socket failed: Connection reset by peer.". Of course, if we try to connect through the SFTP client from the OAS machine to the SFTP server, we can do it with no problems.
What can we do?

Log a Service Request with Oracle. We are working with Oracle to resolve SFTP related issues as well.
Good luck, Sjoerd

FTP Adapter setting filename at runtime not working

Hi,
I am facing an issue SOA 11.1.1.5 with FTP Adapter setting the filename at runtime. I have a process that reads a file from local server and puts it over to a remote FTP Server.
I want to use the same filename that is picked up locally and placed on the ftp location. Below is the snippet of FTP Invoke and the filename is read from a variable which is set before the invoke
<invoke name="Invoke_PutFile"
inputVariable="Invoke_PutFile_PutFile_InputVariable"
partnerLink="PutFile" portType="ns2:PutFile_ptt"
operation="PutFile" bpelx:invokeAsDetail="no">
<bpelx:inputProperty name="jca.file.TargetFileName" variable="targetFileName"/>
</invoke>
Here is the FTP jca file snippet
<endpoint-interaction portType="PutFile_ptt" operation="PutFile">
<interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
<property name="LogicalDirectory" value="FtpDir"/>
<property name="FileType" value="ascii"/>
<property name="Append" value="false"/>
<property name="TargetFileName" value="setAtRunTime"/>
<property name="NumberMessages" value="1"/>
</interaction-spec>
</endpoint-interaction>
But when I test I am getting an error, it's complaining Cannot set JCA WSDL Property. Error while setting JCA WSDL Property. Property setTargetFileName is not defined for oracle.tip.adapter.ftp.outbound.FTPInteractionSpec Please verify the spelling of the property. ".
Fault Details : com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault} messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage} parts: {{ summary=Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'PutFile' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.ftp.outbound.FTPInteractionSpec due to: Cannot set JCA WSDL Property.
Error while setting JCA WSDL Property. Property setTargetFileName is not defined for oracle.tip.adapter.ftp.outbound.FTPInteractionSpec Please verify the spelling of the property. ".
The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ".
The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ,detail=Cannot set JCA WSDL Property.
Error while setting JCA WSDL Property. Property setTargetFileName is not defined for oracle.tip.adapter.ftp.outbound.FTPInteractionSpec Please verify the spelling of the property. ,code=null}
If I use *<property name="FileNamingConvention" value="%yyMMddHHmmssSS%_%SEQ%.txt"/>* inside the jca file it works but I want to use the filename at runtime and be the same name as it's picked up.
Any idea what I am doing wrong.
Thanks

.bpel file
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="SharedServiceFtpFileMove"
               targetNamespace="http://xmlns.oracle.com/SOALocal/SharedServiceFtpFileMove/SharedServiceFtpFileMove"
               xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
               xmlns:client="http://xmlns.oracle.com/SOALocal/SharedServiceFtpFileMove/SharedServiceFtpFileMove"
               xmlns:ora="http://schemas.oracle.com/xpath/extension"
               xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
         xmlns:ns1="http://xmlns.oracle.com/pcbpel/adapter/file/SOALocal/SharedServiceFtpFileMove/FilePoller"
         xmlns:ns2="http://xmlns.oracle.com/pcbpel/adapter/ftp/SOALocal/SharedServiceFtpFileMove/PutFile"
         xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
         xmlns:xsd="http://www.w3.org/2001/XMLSchema"
         xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
         xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
         xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
         xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
         xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
         xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
         xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
         xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
         xmlns:ns5="http://xmlns.oracle.com/SharedServiceEmailNotification/xsd/V1"
         xmlns:ns4="http://xmlns.oracle.com/pcbpel/adapter/opaque/"
         xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap">

<partnerLinks>
    <partnerLink name="FilePoller" partnerLinkType="ns1:ReadFile_plt"
                 myRole="ReadFile_role"/>
    <partnerLink name="PutFile" partnerLinkType="ns2:PutFile_plt"
                 partnerRole="PutFile_role"/>
</partnerLinks>
<variables>
    <variable name="Receive_ReadFile_InputVariable"
              messageType="ns1:ReadFile_msg"/>
    <variable name="sourceFileName" type="xsd:string"/>
    <variable name="targetFileName" type="xsd:string"/>
    <variable name="Invoke_PutFile_PutFile_InputVariable"
              messageType="ns2:PutFile_msg"/>
    <variable name="FtpJndi" type="xsd:string"/>
</variables>
<faultHandlers>
    <catchAll>
      <sequence name="Sequence1">
        <terminate/>
      </sequence>
    </catchAll>
</faultHandlers>
<sequence name="main">
    <receive name="Receive" createInstance="yes"
             variable="Receive_ReadFile_InputVariable"
             partnerLink="FilePoller" portType="ns1:ReadFile_ptt"
             operation="ReadFile">
      <bpelx:property name="jca.file.FileName" variable="sourceFileName"/>
    </receive>
    <assign name="Assign_Data">
      <copy>
        <from variable="sourceFileName"/>
        <to variable="targetFileName"/>
      </copy>
      <copy>
        <from expression="'eis/Ftp/FtpAdapter'"/>
        <to variable="FtpJndi"/>
      </copy>
    </assign>
    <assign name="Assign_Invoke">
      <copy>
        <from variable="Receive_ReadFile_InputVariable" part="opaque"/>
        <to variable="Invoke_PutFile_PutFile_InputVariable" part="opaque"/>
      </copy>
    </assign>
    <invoke name="Invoke_PutFile"
            inputVariable="Invoke_PutFile_PutFile_InputVariable"
            partnerLink="PutFile" portType="ns2:PutFile_ptt"
            operation="PutFile" bpelx:invokeAsDetail="no">
      <bpelx:inputProperty name="jca.ftp.TargetFileName" variable="targetFileName"/>
      <bpelx:inputProperty name="jca.jndi" variable="FtpJndi"/>
    </invoke>
</sequence>
</process>File Adapter Poller jca
<adapter-config name="FilePoller" adapter="File Adapter" wsdlLocation="FilePoller.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="*-*.txt"/>
<endpoint-activation portType="ReadFile_ptt" operation="ReadFile">
    <activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
      <property name="DeleteFile" value="true"/>
      <property name="LogicalArchiveDirectory" value="FtpLocalArchive"/>
      <property name="MinimumAge" value="0"/>
      <property name="Recursive" value="true"/>
      <property name="PollingFrequency" value="15"/>
      <property name="LogicalDirectory" value="FtpLocalFiles"/>
      <property name="IncludeFiles" value=".*-.*\.txt"/>
      <property name="UseHeaders" value="false"/>
    </activation-spec>
</endpoint-activation>
</adapter-config>Ftp Adapter put jca
<adapter-config name="PutFile" adapter="FTP Adapter" wsdlLocation="PutFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/Ftp/FtpAdapter"/>
<endpoint-interaction portType="PutFile_ptt" operation="PutFile">
    <interaction-spec className="oracle.tip.adapter.ftp.outbound.FTPInteractionSpec">
      <property name="LogicalDirectory" value="FtpDir"/>
      <property name="FileType" value="ascii"/>
      <property name="Append" value="false"/>
      <property name="TargetFileName" value="setAtRunTime"/>
      <property name="NumberMessages" value="1"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>Thanks

FTP Adapter in SOA10.1.3.4.0 MLR4 doesn't work and no errors either

Hi All:
First my env summary:
I have install SOA10.1.3.4.0 (with MLR4) on my laptop (Windows XP). Also I have install Filezilla Server on same laptop.
In Fillezilla, I have configured a ftp location to "F:\MyFTPServer" directory. F drive is a local drive on my laptop. Also I have created a user called "soa" with password "soa" to be able to access this FTP server.
Under F:\MyFTPServer directory, I have 3 sub folders:
In -- to get file
Out -- to drop the file
Archive -- to archive the file after get and drop
I have successfully accessed this ftp server from other computer using either MS-DOS FTP command or FTP software (e.g. WinSCP) as user "soa". I am able to drop file to "In" dirrectory and get file from "Out" directory.
Above confirms my FTP server is ready to be used.
Next, in SOA 10.1.3.4.0 AS console, I have create a new Connection Factory called "*eis/Ftp/myFtpServer*" (there is a seeded one called eis/Ftp/FtpAdapter and I didn't touch/configure it).
the following is the settings for eis/Ftp/myFtpServer
host: my laptop computer name
port: 21
ftpAbsolutePathBegin: /
ftpPathSeparator: /
listParserKey: WIN
username: soa
password: soa
serverType: win
for the rest settings, I leave as default.
Then, I create a simple BPEL process with following components:
One FTP Adapter called "MyFTP" with following parameters:
<jca:operation
FileType="ascii"
PhysicalDirectory="In"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
PhysicalArchiveDirectory="Archive"
DeleteFile="true"
IncludeFiles=".*\.csv"
PollingFrequency="60"
MinimumAge="60"
FileModificationTime="FileSystem"
ModificationTimeFormat="4,18,yyyyMMddHHmmSS"
OpaqueSchema="false"
</jca:operation>
<service name="MyFTP">
<port name="GetFile_pt" binding="tns:GetFile_binding">
<jca:address location="*eis/Ftp/myFtpServer*" UIincludeWildcard="*.csv" />
</port>
</service>
I create one Receive activity to get file from "MyFTP" FTP Adapter.
Using above setting, my intention is to poll any file (*.csv) from F:\MyFTPServer\In directory and receive it into my receive activity.
I deployed my project to SOA application server and stop/restart my SOA application once.
Now, the real stuff begins:
I dropped 2 simple, very small (size < 1KB) files called sample.csv and sample2.csv to F:\MyFTPServer\In diretory.
In my domain.log file, I can see my BPEL process is starting polling every 1 minute without any error:
<2010-09-16 15:29:25,015> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-09-16 15:29:25,015> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
<2010-09-16 15:30:25,016> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Managed Connection Created
<2010-09-16 15:30:25,016> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created
Meanwhile, I am observing Filezilla server log and it clearly said every one minute (the timestamp match to bpel domain.log 100%), user "soa" login to this FTP server and list both files (sample.csv and sample2.csv) in "In" directory. Then it quits.
However, I don't see any BPEL instance is created (In my BPEL project, I have cheched "Create Instance" when create my receive activity). And both files are still there in "In" folder. Per my configuration of "MyFTP" FTP adapter, the file should be deleted after it is polled successfully (*DeleteFile*="true")
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> USER soa
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000132)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 230 Logged on
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> PWD
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 257 "/" is current directory.
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> PASV
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 227 Entering Passive Mode (10,1,90,187,13,110)
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> NLST /In
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 150 Connection accepted
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 226 Transfer OK
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> USER soa
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000133)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 230 Logged on
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> MDTM /In/sample.csv
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 213 20100916184802
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> QUIT
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 221 Goodbye
(000133)9/16/2010 15:29:25 PM - soa (10.1.90.187)> disconnected.
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> USER soa
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000134)9/16/2010 15:29:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 230 Logged on
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> MDTM /In/sample2.csv
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 213 20100916184802
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> QUIT
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> 221 Goodbye
(000134)9/16/2010 15:29:25 PM - soa (10.1.90.187)> disconnected.
(000132)9/16/2010 15:29:25 PM - soa (10.1.90.187)> disconnected.
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> USER soa
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000135)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 230 Logged on
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> PWD
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 257 "/" is current directory.
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> PASV
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 227 Entering Passive Mode (10,1,90,187,13,130)
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> NLST /In
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 150 Connection accepted
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 226 Transfer OK
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> USER soa
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000136)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 230 Logged on
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> MDTM /In/sample.csv
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 213 20100916184802
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> QUIT
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 221 Goodbye
(000136)9/16/2010 15:30:25 PM - soa (10.1.90.187)> disconnected.
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> Connected, sending welcome message...
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-FileZilla Server version 0.9.36 beta
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220-written by Tim Kosse ([email protected])
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 220 Please visit http://sourceforge.net/projects/filezilla/
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> USER soa
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> 331 Password required for soa
(000137)9/16/2010 15:30:25 PM - (not logged in) (10.1.90.187)> PASS ***
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 230 Logged on
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> MDTM /In/sample2.csv
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 213 20100916184802
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> QUIT
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 221 Goodbye
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> disconnected.
(000135)9/16/2010 15:30:25 PM - soa (10.1.90.187)> disconnected.
I am bit of confused. In my case, there is no any error anywhere; however, FTP Adapter in my bpel project doesn't poll file either. It does login to FTP server every one minute; did a list command; then quit.
You may suggest I change the following 2 settings in my bpel project:
FileModificationTime="FileSystem"
ModificationTimeFormat="4,18,yyyyMMddHHmmSS"
however, I think they are set correctly, because it match to MDTM command result in my Filezilla server log (see above and below). The modificaiton time format starts at position 4 and ends with position 18 with correct mask
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> MDTM /In/sample2.csv
(000137)9/16/2010 15:30:25 PM - soa (10.1.90.187)> 213 *20100916184802*
Can anyone offer me some help? I am desperately want make this work so that I can show this example to others here.
Thanks in advance!
Kevin
Edited by: user3026501 on Sep 16, 2010 1:44 PM
Edited by: user3026501 on Sep 16, 2010 1:47 PM

After I delete following 2 lines, I got some error in domain.log
FileModificationTime="FileSystem"
ModificationTimeFormat="4,18,yyyyMMddHHmmSS"
Error in domain.log
<2010-09-29 11:01:56,358> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Managed Connection Created^M
<2010-09-29 11:01:56,358> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Connection Created^M
<2010-09-29 11:01:56,405> <ERROR> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Error in creating FTPTimeMask^M
<2010-09-29 11:01:56,452> <ERROR> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Could not get file modification time for : test1.csv^M
<2010-09-29 11:01:56,452> <INFO> <default.collaxa.cube.activation> <FTP Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11430
Error in listing files in the remote directory.
Unable to list file in remote directory.
Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
^M
Here is my latest jca:operation definition:
<jca:operation
FileType="ascii"
PhysicalDirectory="In"
ActivationSpec="oracle.tip.adapter.ftp.inbound.FTPActivationSpec"
PhysicalArchiveDirectory="Archive"
UseRemoteArchive="true"
DeleteFile="true"
IncludeFiles=".*\.csv"
PollingFrequency="60"
MinimumAge="120"
OpaqueSchema="false" >
</jca:operation>
Any more suggestion?
Thanks!
Kevin

How does TimeOut(Sec) works/ behave in FTP Adapter?

Hi ,
How does TimeOut(Sec) works/ behave in FTP Adapter?
Lets Say : If I mention 300 Secs in this . How Should it behave ??
if a file processing in adapter is taking more then 300 sec , will it also be terminated ??? what error response i will get in such case.
Regards
Prabhat Sharma.

Hi,
if there's a network error the channel may hang (for a very long time)
if you specify 300 secs after that time the channel will reset the connection and you can start pooling again
for more details:
Note 849089 - XI 3.0 / PI 7.0 File Adapter: FTP Timeout Handling
Regards,
Michal Krawczyk

Oracle AS B2B - Various Features in FTP Adapter (FTPS, SFTP...)

As part of the Oracle AS B2B 10.1.2.0.2 FTP adapter offering following features are supported. FTP Protocol forms part of the Generic Exchange Plugin.
1. Basic FTP
Identification of Trading Partner Criterion is slightly different for Internal and External Delivery channel, even though identification is based on the "Name" in both of this cases.
a. For External Delivery Channel.
i. Identification of Trading Partner is based on the name of the file and the name shoud follow the patterns as nameOfTP_UniqueID.
ii.Identification of Trading Partneris based on the name of the Directory. To enable this it is required to set
oracle.tip.adapter.b2b.allTPInOneDirectory= True as part of tip.properties setting.
b. For Internal Delivery Channel.
The identification of Trading partner and the Document is based on the name of the file and should follow the pattern as
TradingPartner_DocumentType_Revision_msgType_msgId_replytoMsgID_extension.xml
2. FTPS : FTP OVer SSL
Download any of the FTP server which can be configured to FTPS such as FIlezilla. Configure FTP server for FTPS as per the FTP server documentation.
Oracle AS B2B Configurtion:
The SSL configuration is drived by the value of parameter "Channel mask"
1. Depending on the mode of data transfer i.e Active/Passive , specify the data port for Active configuration and no data port for passive mode. Control port is there for both the mode and by default B2B considers this to be 21, there is a need to
mention it for any deviation.
2. Receiver Channel Mask (Host) : Depending on whether No channel encrypted, data channel to be encrypted , Control Channel to be encrypted or Both control and Data channel to be encrypted specity none, Data, Control or Both accordingly.
2. Sender Channel Mask (Trading Partner) : Depending on whether No channel encrypted, data channel to be encrypted , Control Channel to be encrypted or Both control and Data channel to be encrypted specity none, Data, Control or Both accordingly.
Refer to the user guide for FTP Transport configuration.
3. SFTP(New Feature available as part of latest B2B patch # 6353697)
SFTP implementation has been provided for Oracle B2B 10.1.2.0.2 version. This enables B2B to send and receive payload files over SFTP (SSH FTP) protocol.
SFTP protocol support added for both external trading partners and internal applications communications. The naming conventions of the payload files are in-line with File and FTP adapters.
Proxy support provided (HTTP)
Authentication Support :
Password based authentication – username/password combination authentication
Public key authentication – authenticating the identity based on the public key
create a key pair using OpenSSL keygen tool and the Public key need to be installed in the server. and the private keys fully qualified file location has to be specified in Private Key file and the passphrase has to be provide in Prive Key Pass phrase.
If the passphrase is present in the FTP configuration, B2B engine considers the password based Authentication else key based Authentication otherwise it is key based Authentication.

Hello Ramesh
I want to configure FTPS using FTP adapter in Oracle BPEL,I am not configuring any wallet as of now.I am gettig following error while invoking the Put Operation of FTP adapter.
<messages><input><Invoke_1_Put_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="Zebra_CRM005ProcessRequest"><Zebra_CRM005ProcessRequest xmlns="http://xmlns.oracle.com/Zebra_CRM005">
<input>test</input>
</Zebra_CRM005ProcessRequest>
</part></Invoke_1_Put_InputVariable></input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>null</code>
</part><part name="summary"><summary>file:/vol2/opt/oracle/product/10.1.3.1/soa/bpel/domains/default/tmp/.bpel_FTP_WRITE_NEW_v2008_09_24__47502_0c1781b2ce7e4236dffaaa7cabd43a0c.tmp/A.wsdl [ Put_ptt::Put(Zebra_CRM005ProcessRequest) ] - WSIF JCA Execute of operation 'Put' failed due to: Error sending file to FTP Server.
Unable to send file to server.
; nested exception is:
ORABPEL-11429
Error sending file to FTP Server.
Unable to send file to server.
Please ensure 1. Specified remote output Dir has write permission 2. Output filename has not exceeded the max chararters allowed by the OS and 3. Remote File System has enough space.
</summary>
</part><part name="detail"><detail>null</detail>
</part></remoteFault></fault></messages>
Please help in configuring FTPS in oracle FTP adapter.
Thanks
Satendra Pare
[email protected]

File Polling is not working in FTP adapter

Experts,
Configured FTP adapter should poll the file from the FTP server which is in active mode .But this is not happening as expected. This feature was not available in Oracle soa 10g
http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf
they say :
Does the FTP Adapter Support the ACTIVE Mode of Connections?
No, for security concerns the FTP adapter supports PASV (passive) only.
Do they have not change this feature in Oracle soa 11g.
Your thoughts will be very much appreciated.
Thanks

I doubt if the ftp path is not given correctly. Can you try this.
1. if you gave logical_file_path try giving the actual file path or vice versa and try.
2. having the highest level of logging enabled (development). You should see some error in the logs. Is this on linux or windows, if linux search is case sensitive
hence search for 'rror' without 'e' as you donot know the case it would be in.
3. last option try retiring the process and then turn it on. This works sometimes to pick the file

Sender FTP Adapter not working with certain name

Hello,
We're facing the next problem within XI.
We configured a sender FTP adapter within the central adapter engine. This adapter is configured correctly however for some reason it is not picking up any file from the FTP server.
Changing status to inactive-> active again all kinds of modes and configs we tested.
However when copying this non-working adapter to a new one with a different name (Configuration is exactly the same!!!!!) and use this one in the sender agreement it worked immediately.
Somebody else faced similar problems and managed to solve it because for this error we don't want to adjust our naming conventions....
Thanks,
Emile

Hi Emile,
This could happen when AE cache is not getting updated.
Goto SXI_CACHE.
Click "Goto" -> AE Cache and check if you get a green symbol with a message saying " Cache contents are up-to-date".
Regards,
Anish

SFTP FTP Adapter work around

Similar Messages

Maybe you are looking for