Shipping Point Determination for Sub contracting Process

Dear Experts,
While processing the GR for a Sub Contract Purchase Order, we are getting an Error 'VL 100 - Shipping Point XXX doesn't exists'
However, I am not understanding where from this Shipping point is picked.
Checked the Shipping point determination based on Loading Grp, Shipping conditions & Plant. But that is a different shipping point, and it is being picked while processing the outbound delivery for sending components thru 541 Movement.
It is clear that the Shipping point XXXX is not existing, but not sure, as where from that Shipping point is being determined while doing GR
Request for your inputs please
Thank you,
Best Regards,
Ramakrishna Mangena

Hi Ramakrishna ,
What u earlier said is perfectly right : Shipping point determination based on Loading Grp, Shipping conditions & Plant
Check the following :
Are u posting GR through VL31N .
If yes, just check the receiving pt entered in Header Data - Shipment Tab.
Regards
Ramesh Ch

Similar Messages

Delivery order for sub-contract processing scenario

Hi experts,
We got a requirement from our users to sub-contract certain production processing steps (or called external processing per SAP). Same part number would be used for the goods issue and goods receipt. But would like to make the delivery for the goods issuing as the delivery for normal sales parts. (Purchase order -> Delivery order -> Shipping and Packing)
Sub-contract processing will generate purchase order like service order which only contains service fee item, and we found that no outbound delivery order can be created with reference to purchase order in standard SAP.
Have you experienced such scenario before and could share to us please?
Regards

When moving subcontracting part to your subcontractor you can do it via:
1. simple goods movement
2. delivery
1 Simple goods movement (transfer posting)
- /w reference to PO (MB1B + 541)
- w/o reference to PO (MB1B / MIGO + 541)
2 Delivery
Using the before mentioned ME2O you can create the delivery w/o reference to PO
Please note that even if you use the MB1B541PO reference solution, system just suggests the component qunantity on the PO w/o making a real link between PO and goods movement. You can example do the MB1B541PO reference "as many times" as you want...
So, as per my best knowledge there's no solution for your requirement.
I guess one reason of system's behaviour might be that provision of compoenents doesn't depend on one single PO - if you want to reduce your shipment cost you will send out lots of components at once, more than the amount needed for one call-off.
Regards,
Csaba

Batch determination for Sub Contracting Purchase orders

Hi
I want to allocate automatic batch number while creating the Sub Contracting Purchase order (item cat: L).
System should dynamically allot the batch, no manual process.
This automatic batch number allocation should be work for sub contracting PO's not all Purchase orders.
Please suggest the process.
Thanks

Hi SUNIL,
I haven't done such thing so I'm nut sure whether it works what I'm writing, but according to the manual is it possible to assign automatic batch creation to movement types.
As I understood in SPRO you can:
1. Set the internal batch assignment:
Logistic General > Batch Management > Butch Number Assignment > Activate IBNA
2. Define the creation for the movement type you want:
Logistic General > Batch Management > Creation of New Batches > Define Batch Creation for Goods Movements
But I think you can't make difference between 'normal' MVT 101 and 'L' MVT 101. Isn't it possible to create a new MVT for subcon-GR?
In this case maybe you could realize your idea.
But defining a new MVT just because of thi might be troublesome...
Maybe you can find better solution.
http://help.sap.com/saphelp_46c/helpdata/en/25/283c3f4f7811d18a150000e816ae6e/frameset.htm
BR
Csaba

541 & 543 Mvt for Sub Contract Process with Split Valuation

Hi all,
We have activated SPLIT VALUATION for sub contracting in ECC 6.0
We have clasified into 3 Valuation Catergories as New,Repaired & Faulty.
The logic & naming convention of the materials are
New Material : C1
Repaired : C2
Faulty : C3
The details are as.....a faulty material can be converted into Repaired by the external Vendors,for which we raise a PO and do MB1B with 541 mvt type with ref to this PO.
The Acing Entries are
PK      GL Code        Material     Value
99         117000         C3            10
89         117000         C2            100
93         600530                           90
While in process the GR w.r.t the above mentioned PO ,we are getting 6 accounting entries (which is delivered by Stand SAP) they are as
PK      GL Code       Descrip     Value
89         117000        Stock        100
96         117400        GR/IR         150
91         600530        Sub Cont    100
86         600863        Sub Service 150
99         117000        Stock          100
81         600530        Sub Cont     100
Can any please explain me how the system calculates the above Accounting Entry.
We are confused why the system calculates ( entries) for the 91,81,86 Posting Key.
I have uderstood that PK 89 for goods inward, 96 is for GR/IR clr, 99 is for reversal of 541 mvt type.
Other 3 entries i have the confusion ........
Can anyone please guide me and explain in detail how ,why andfrom where the system is calculating the entries.
Hope that you will help me in this regards
Take Care
God Bless
Regards
Praveen.
Edited by: Praveen Singh on Sep 16, 2008 8:07 PM

Go to OMWB and click on simulation and here enter you mateirla number, plant and Mtype 101
Then click on account assignment
you will see all the entries
Posting Lines Text              VlGCd AGC VCl   PK Acct D      PK Acct Cr
Gain/loss from revaluation      -e-   -e- -e-   83 440700      93 440700
Inventory posting               -e-   -e- TRA1 89 130000      99 130000
Incidental costs of external a -e-   -e- -e-   86 460820      96 460820
External activity               -e-   -e- TRA1 86 460960      96 460960
Change in stock account         -e-   -e- TRA1 81 460820      91 460820
Purchase offsetting account     -e-   -e- -e-   40 --Missing- 50 --Missing-
Purchase account                -e-   -e- -e-   40 --Missing- 50 --Missing-
Materials management exch.rate -e-   -e- -e-   40 440600      50 440600
Cost (price) differences        -e-        TRA1 83 440000      93 440005
GR/IR clearing account          -e-   -e- TRA1 86 210005      96 210005
Inventory posting               -e-   -e- TRA1 89 130000

Batch Determination for Sub Contracting GR

the user performs the GR for subcontacted items they need to report the qty and batches used for the components on the GR - similar to CORKIng really. The request here is to have the ability to show the batches and qtys available in stock at the vendor - like batch determination on CORK goods movement screen.

Yes i understand your requirement.
Follow this link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0caed4a-40f9-2c10-349a-96ec617a8161?quicklink=index&overridelayout=true
This article related to SD . For MM also same configuration except following
1.search strategy - MBC1 ,use ME01 -strategy type and maintain condition records for 543 mov type .If you want you can create one table with special stock indicator also and maitain condtion record for 543 - O .
For more information follow this menu path
SPRO -- Logistic general -- Batch management --Batch determination and batch check

Shipping point determination is not happening for CRM sales order in ECC

Hi,
When we create direct sales order in ECC, shipping point determination is happening automatically that means all the relevant settings are properly maintained in ECC for automatic determination of shipping point.
But when we create sales order in CRM and replicate it to ECC, shipping point field is empty even though we use same master data.Hence we are unable to create delivery document.
All the master data (Org structure,Customers,Materials and plants) downloaded from ECC to CRM.
Your help would be highly appreciated.
Thank you.
Regards,
Nagi

Hello Nagi,
Shipping point is determined by the following three factors:
1.shipping condition 2.loading group 3.plant
So please check your customization by the following steps:
1.Use T-code OVX6 to check if you have assigned the plant to your CRM order's sales organization.
2.Shipping condition is usually taken from CRM order directly. Please check whether you have CRM order shipping condition set to the same one as creating ECC order VA01
3.Use T-code SPRO then press F5, go to Logistics Execution Shipping Basic Shipping Functions Shipping Point and Goods Receiving Point Determination Assign Shipping Points to check the shipping point is assigned correctly.
I hope this could be helpful.
Best regards,
Maggie

What is transaction code for shipping point determination

what is transaction code for shipping point determination in a plant

Shipping point determination happens based on,
1. Shipping condition from customer master
2. Loading group from material master and
3. Delivering plant.
You can define all of them in OVL2.
Thank you
ANil

Sub contract process in india version

Hi gurus,
can anybody kindly tell the sub contract process in india? what is the process and how the configuration will be customized? my client having 4.6c, and recently implemented cin version.
given the full points for answer.
Raghav

This may help:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/cin+configuration&
If you are talking about sub contractors and withholding tax.

User exit Shipping point determination

Hi,
Shipping point determination based on item category/loading group/site.
User exit is USER_EXIT_SOURCE_DETERMINATION
Any suggestion will be wellcomed
Thanks

Hi
i tried to find ur exit but it is not there
try using these
MV56AINI Initialization of transaction control for transportatio
V56AFCCH Shipment processing: Check function code allowed
V56AGTAR User Exit for Filtering Shipping Unit Calculation
V56ARCHV Customer-spec. checks for archiving shipments
V56ATKTX Change the number of lines for text input in shipment
V56BMOD   Transportation processing: Field modification
V56DISTZ Shipment Processing: Determine Distance
V56FCOPY Shipment processing: Copy delivery data
V56FSTAT Shipment processing: Activities when setting a status
V56L0001 Status of Shipments for a Delivery
V56LDELI Read Delivery Data for Shipment Processing
V56LOCID Shipment Processing: Determine Location Identification
V56MVT04 Extensions for Collective Processing of Shipments
V56SLDET Shipment processing: Leg determination
V56TDLIF Filter Delivery Items for Shipment
V56UCHCH Shipment processing: Check whether changes were made
V56UCHCO Check shipments are complete
V56UDLUP Obsolete as of 4.6C: Delivery Update on Delivery Routin
V56UNUMB Shipment number allocation
V56USTAT User-individual definition of transportation planning s
V56USVDO Update new objects for transport
V56USVDP Preparation for updating new objects for transport?
Regards
Shiva

Shipping point determination problem

Hi Gurus,
I have created a shipping point, assigned an existing plant to it and also created the shipping point determination assignment with fields Shipping condition, loading group and plant. Still the shipping point is not being determined in the sales order.
If I manually enter the shipping point in sales order it gives me an error which reads as 'Ship.condition 11 loading grp 0001 plant IN10 StLoc not defined'
I dont understand what is the setting i am missing for shipping point determination.
Regards,
Sunil

hello, friend.
what interests me is that the message includes the storage location. under more common circumstances, storage location is determined upon delivery processing.
please look into whether:
1. there are enhancements in sales order processing, wherein storage location is determined
2. check the shipping tabs in the sales order if the storage location has been entered (and perhaps the storage location entered is not compatible with the material)
3. i doubt if storage location determination with situation is a factor, since this also takes place at delivery, but it could be worthwhile to check which picking rule is assigned to your delivery type
regards.

Sub Contracting Process

my client running fg sub contracting (electro plating )cycle through the MRP
after return from vendor with mvt type 105 (543) i check document list with MB51. i found following g/l account effects :
SFG consumption for sub contract account = 602026
Gr/IR Clearing Account = 164335
SFG-inventory account = 323055
for sub contract account = 602130
Inventory account = 320010
Costs of goods mfg = 602200
but if do whole sub contracting cycle without MRP i can see effect in following G/L a/C:
Manual Cycle .
Inventory account = 320010
Gr/IR Clearing Account = 164335
Price Differance Account = 602155
change in stock = 603010
Sub Contract expense = 603000
SFG-inventory account = 323055
SFG consumption for sub contract account = 602026
my question is why this differance comes ?
if i want gl accounts hit by manual process in MRP process what changes to be made ?

Hi
Kindly check with the following:
In customizing for that plant price differences should or not be posted during GR.
SPRO->IMG>MM>Inv MGmt>GR-->price differences for subcontracting at GR
Thanks

Inbound delivery for Sub-Contracting Scheduling Agreement

Hi All,
I am working on inbound delivery creation --> PGR for sub-assembly (Semi-finished product) which we receive from sub-contracting vendor through scheduling agreement. At time of PGR, it should do MVT#101 for sub-assembly and 543-O for raw components.
I already created JIT/FRC releases and did PGI (MVT # 541-O) for raw components. Now I am manually creating inbound delivery (VL31n) to post PGR. When I am doing PGR with VL60, I am getting below error.
Any help or suggestion please ?
As observation, I have seen that in inbound delivery I am only seeing sub-assembly (semi-finished) product. I am not able see "SC Component" tab which I have seen on other environment (ECC 6.0 with EHP4). Is it related to system limitation where we can't do PGR for sub-contracting ?
Thanks.

Hi AKPT,
Sorry if i miss understood but note 352243 says to refer note: 338119
"In the current release, it is not possible to process the components to be cleared when you post the goods receipt for the inbound delivery. (See Notes 338119, 197864 and 199703 also).
However when you implement these corrections, the error log is also displayed for the subitems to be cleared and further processing can be carried as described in Note 338119."
When I refer note : 338119, there is no correction. Am I missing anything ?
Again my issue is I am not able to perform Post Goods Receipt. Even after doing PGR, if system do 543 for raw component, I am fine.
Thanks.
Regards,
Ravi

Swap between two different item categories in sales orders for sub-contracting

Dear gurus,
my requirement is to have the ability to swap between two different item categories for sales orders for sub-contracting.
This should be controlled by a combination of the material and a value maintained the Usage field in the Customer Material Info Record (for example by entering a ‘V’). A combination of Sales Doc Type, Item Cat Group and Usage should result in the creation of a purchase requisition.
In the event that a process order is required instead of a purchase requisition (i.e. the product is to be manufactured in-house instead of sub-contracted) the user must have the ability to change the Item Category within the sales order to produce a process order.
The user would just change the item category within the sales order, and the system would automatically remove the purchase requisition assigned to the SO, and create a process order and assign it to the SO.
Can you suggest any possible solution?
Thank you in advance.

Hi Majlo,
In my system, I checked. First created sales order with third party line item and then changed item category to normal item category.
Till Purchase order not created, I can change Item category of my sales order line item.
In this case SAP inform by log and once save delete purchase requisition of that line item .
For this you need to assign another item category as an manual item category in SPRO Item category assignment.
After this user can manually change item category to other one manually, if PO do not exist.
Please let me know if your query is different.
Regards

Shortage qty - sub-contract process

hi,
In sub-contract process:
Vendor suppose to return - 10 qty
but, we received only 8 qty.
Vendor has accepted to pay For shortage 2 qty.
1. How to address the above scenario?. (exciseable material)
reg
mrs

Dear ,
case 1) IF GR NOT DONE YET:
do the GR and , at the time of GR increase consumption qty.from 8 to 10.
that means u have comsumed more than required .then raise the debit note for loss.
reconcille the challan by the same GR doc and complete the same.
Case 2)IF GR is allready done.
reconcille the challan by GR document,then do 542 for remainning 2 qty.re4concille the challan by dat document.and complete the challan.
then take a physical inventory of that material for perticular storage location and post the negative difference .syatem showa that as a loss for u then raise the debit note for the same.
regards,
sujit borse

Sub-contract process with T.codes..?urgent

Hi
can anybody explain me ,
what are all procedures to be followed to carry Sub-contract process with T.codes.
From sub-contract PO to Subcontract challan output
Explain me step by step process with t.codes
Thanks
sap-mm

Hi,
Sub Contracting Process with t.codes are:
(1) You have create material in MM01(Finished Goods ,mat type FERT) that can be procured externally, and you have maintained BOM (CS01) with components (Raw Materials , Mat type ROH). Any waste generated as scraps or by products received during subcontracting process can be maintained as component with negative quantity or in % basis in the BOM in CS01.
(2) Create a subcontracting PO (ME21N, Item Category L). Maintain Purchase Info Record (ME11)for Subcontract category for material and subcontractor.
(3) You make a transfer posting to issue components(Raw Materials) for SC PO(In ME2O directly or by MB1B with 541 Movement type). Material is sent to subcontractor. As material remains under your ownership, system does not make any value entry. But quantity is shown as "Material Provided to Vendor" .So no accounting document generated by supplying raw material to Sub Contracting Vendor.
(4) You receive (MIGO) finished material against SC-PO. You also specify components consumed in manufacturing of finished goods. Additionally, if you have negative components in BOM, now you'll also receive subcontracting by-products. There are three events, so three accounting entries are generated:
FG BSX acc. Debit Acc.
GR/IR Cle.acc. WRX acc. Credit Acc.
FRL Acc. Debit Acc.
BSV acc. Credit Acc.
BSX acc. of components Credit Acc.
GBB - VBO Acc. Debit acc.
PRD acc. Some time Credit &
Some time Debit
(5) Invoice Verification (MIRO) for SC Invoice.
(6) Payment in F-53
If you are activate Price Diff. Acc. for SC-Vendor in....
OLMB -
> GR -
> Price diff. acc.for SC order while you do GR for your Plant......then Price Diff. Acc. also will be trigered...
Regards,
Biju K

Shipping Point Determination for Sub contracting Process

Similar Messages

Maybe you are looking for