Shop papers - maintenance orders
Hello Guys,
Can we have different forms for different plant with same order type ? if yes how to make the default shop key for each plant ?
Mahee
Hi,
In OID2 -> In Application area O , For same order type assign different shop papers ..,
After doing config in OID2 , In Application area O , these shop papers wil be be avaialble for assigning to planning plant, planner group in OID3 .. , here assign each of these shop papers to different planning plant ..,
Now in IW32 system checks combination of order type to planning plant and defaults shop papers while printing ..
Note :- Here , If a particular shop paper is not assigned to an order type in OID2 , then u cannot default in printing via IW32 .for that order type and any planning plant ..
check it up
regrds
pushpa
Similar Messages
-
Control for printing of shop papers (PM Order)
Hi! Can someone advise whether it is possible to control when a shop paper is to be printed? Based on testing, I can see that the print function is available when the PM order is released. However, I would like printing of specific shop paper if for example all the components are issued or receipted. Is there anyway I can control this?
Cheers!
SFHi,
If the requirement of this shop paper printing, is related to a Notification then we can modify the follwoing enhancement in transaction SMOD
Enhancement Description
QQMA0014 QM/PM/SM: Checks before saving a notification
Regards,
Sujatha -
Printing Shop Papers from Maintenance Order Urgent !!!
Hi All,
I am in need of Printing Shop papers from Maintenance order , i know that the configuration of this thing is done through SPRO
Plant Maintenance and customer service ->
Maintenance and Service Processing -> Maintenance and Service Orders -> Print Control -> Define Shop Papers, Forms and Output Programs
, but i want that when we give Print command through Maintenance order a smartfrom should trigger which i have developmed.
My problem is that i am not able to configure the Print control for SMARTFORMS.
What to do , Please suggest.
Regards,
Rachit KhannaAmol,
Standard config doesnt provide the functionality to set the default selection dependant on PLANT. You will have to get the help of developer to do an implicit enhancement (Only If you are in ECC 6.0) to accomplish the same.
Reagrds
Narasimhan -
How to send the Mail of shop papers attached to Service / PM order
I would like to send the E-Mail of shop ppers which I am printing from Service order / Plant Maintenance order. How to do it?
Hi Pete,
Thanks for your valuable input. I have read the note, but it gives solution for notification. Is there any other note for orders (Service order or Plant Maintenance Order). .
I would like to send the mail from orders (Service order or Plant Maintenance Order).
Thank you -
Print Maintenance Order Bulk/ List - Shop paper
Hi all,
As we can print maintenance Order in IW32 wrt the Shop Paper assigned to it, can we print list of Order as per the shop paper assigned to it .
This can be done through IW32 but in that we have do it one by one, can anyone suggest something from where list print of Order wrt shop paper can be done?
Thanks
DMHave a look at IW38
PeteA -
Problem printing plant maintenance order (DEFAULT PRINTERS)
Hi,
I configured default printer in SPRO --> Plant maintenance and customer service --> Maintenance and Service Processing --> Maintenance and service orders --> Print control --> Define printer
I created 2 plant maintenance orders to test the printings jobs.
For 2 different orders, I got the following error message in the printing logs (it's in french): INOPÉRANT (means not working in english). What config should I correct. Could the problem be in the orders? Thanks.
TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 11100942
000011100942 0010 5210A YUL_CONTROL#2 2060 Bon de main-d'oeuv 3 VALLIEMA 31.03.09 07:20:53
000011100942 0020 5235 YUL_ENTR#6 2060 Bon de main-d'oeuv 2 VALLIEMA 31.03.09 07:20:53
000011100942 0030 5235A YUL_ENTR#12 2060 INOPÉRANT
000011100942 0040 5235B YUL_ENTR#9 2060 INOPÉRANT
000011100942 0050 5235C YUL_ENTR#9 2060 INOPÉRANT
000011100942 0060 5280B YUL_ENTR#4 2060 Bon de main-d'oeuv 2 VALLIEMA 31.03.09 07:20:53
000011100942 0070 7230I YMX_ENT#2 2060 Bon de main-d'oeuv 2 VALLIEMA 31.03.09 07:20:53
TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 13208581
Ordre Nº Opé. Poste Uté sortie APap Formulaire Cop. Utilis. Date Heure
000013208581 0010 5235A YUL_ENTR#12 2060 Bon de main-d'oeuv 1 VALLIEMA 31.03.09 08:03:16
000013208581 0020 5235B YUL_ENTR#9 2060 INOPÉRANT
000013208581 0030 5235C YUL_ENTR#9 2060 INOPÉRANTHi,
I am not sure but are you trying to print shop papers at default printer specified in config.First thing is are orders released,I presume they are released hence you are getting message.
Next thing is check config as below:
Application area - O for maint orders
Planning plant - * or define your plant
Planner group - * or same as above
Shop paper - Define shop paper or *
Output device - LOCL or your device property...It is advised to put LOCL as different users can ahave different printers.
Storage mode -1 for printing only
then select print immediately and delete after output.
After this in your master(SU01) define output device as LOCL and this will pick up your default printer of your desktop or working station as configured in windows.
Also check if right shopapers you have assigned to order type,you can confirm them if you see in print preview.
regds,
atul -
Viewing shop papers on Mobile Device
Hi Experts,
Can anyone tell me how to view maintenance shop papers on a mobile device for an order that has been imported from the R/3 for a user. Is there a standard functionality to view the maintenance shop papers or we have to implement BADI.
Its Urgent!
Thanks a lot in advance!
RegardsKanwar,
Currently there is no standard functionality to view the shop paper in Mobile Asset Management Application. By looking at the system status of the order /notification in the handheld you could know whether the shop paper was printed or not.
Depending on the device used, You could however print the contents of the order data in the handheld to the local printer associated to the handheld.
If you want to capture additional data in the shop paper thats on the Order details, you would have to enhance the Order and collect all the details and pass the same to the Mobile device.
Thanks
Narasimhan -
Printing Shop Papers for Completed Notifications
Hello,
This issue has been brought up on this forum before, but I have not managed to find an actual solution that was implemented by an organization.
We are basically trying to print Shop Papers for completed (NOCO) Notifications that have Orders assigned but that have been completed and TECOu2019d. The thread Need to REPRINT the Service Notification explains that it is not possible to print such shop papers. Is there some way to create a work around using user exits or a custom program to enable such shop papers to be printed? I've already checked with SAP and was told that no SAP note fulfills this requirement on ECC 6.0. I would much appreciate any insight on a solution you may have implemented.
Thanks in advance,
TarunPeteA is right you will need to have some custom code to by-pass the status checks that SAP has implemented.
Prometheus Group has a program called the Work Order Print Manager that can do this for work orders. I am a developer for this solution.
The program gathers all document related to the work order (services for objects, DMS, sapscripts/smartforms, equipment doc, functional location docs, material docs, etc) and puts them into a nice GUI for printing.
Specifically for work order you cannot print them from standard SAP if the order is in created status because the menu is greyed out). However we can put a button in a user exit to call the program. The sapscripts appear along with the other documents and can be printed.
Additionally we can add watermarks and/or to the document to let the users know they are trying to print a work order in the incorrect status. We/ I can demonstrate the work order solution to you and prototype a IW52 solution after a short discussion to help us understand your issue in particular.
http://prometheusgroup.us/wopm.php
if you are interested in a demo email them to set up a demonstration with me.
Edited by: Tim Huang on Mar 17, 2010 1:14 PM
Edited by: Tim Huang on Mar 17, 2010 1:20 PMv -
Maintain settlement rules for order category 30(Maintenance order).
Hi Gurus,
Can we maintain two settlement rules for an order without distribution rule?
Eample:- In an order there are three different costs i.e. material cost,external labour cost and internal labour cost.We want to settle the material cost and external labour cost to Profitability segment and the internal cost to a particular GL account directly.
Note: No distribution rule is required,because all the cost should settle directly to correspoanding heads i.e. PSG or GL.We don't want to assign the GL# again and again for different orders in the corresponding order's settlement rule.
Require your valuable inputs to proceed.
Best Regards,
RamakantaHi Govardhan,
If you are working in ECS, the Shopping cart will not create any follow on document in backend R/3.
I think your Product category is 30, thats why the error says Manual reservation for order category 30 is not allowed.
Where did you get the maintenance order? Generally maintenance order is created in the backend R/3 (Plant Maintenance) and a P.R will get generated against that order.
Using PDP (Plan driven procurement) you can transfer that P.R to SRM and can carry out sourcing and can complete the procurement cycle.
Can you please tell me what is your exact business requirement?
Hope this will make you more clear.
Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja -
Catalog procurement from Maintenance Order
Hi Gurus,
My client is implementing Punchout Catalog from SAP ECC 6.0. we are not into SRM server. I made the settings in Web services ID and Description and i am able to do shopping from Vendors URl and return back to SAP ECC.
Now 1) they want to populate the Vendor name automatically into SAP, which is not getting carried.
2) I want to link the Punchout Catalog to Work order scenario also. For that i need to define the Order type and Catalog in the Link "Interface for Procurement Using Catalog" under the node Plant Maintenance and Customer service which i am not getting.
Please advice me what needs to be done or what settings or any BADI needs to be activated on this issue.
Thanks for your response in advance,
I am not sure is this the right place to post this thread. Please advice.
Thanks,
Saakithyan.Hi,
I already have plan component from maintenance order but when i insert item category N for create a Purchase requisition and insert item category 2 for stock project Q the system blank the field and Don't create a purchase requisition with account assignment Q.
Because the system put away the field blank?
There are any way for create purchase requisition with account category Q?
The BAPI that you suggest me can avoid this problem?
Thank you. -
Hi PM Gurus,
We have a problem while printing shop papers through t code IW3D.
There are 2 shop papers for the order.
First paper prints the long text also but second shop paper does not.
Can anyone tell if there is any setting in config which allows/prevents this.
Matter most urgent.
Any reply will be rewarded suitably.
Thanks,
Manishhi
may be only one operation or operations fits to the one page have long text .kindly specify the shop papers you are trying to print
regards
thyagarajan -
Changing print format for the Shop papers -External service operations
Hi Friends ,
We want print outs for the external service operations in our PM orders .
The standard format available with shop papers is displayed with some extra info .
We want to remove those info and add some extra info .
Can we change the printing format for these and how much effort it rquires .
Regards
AMHi,
In OIDF, define the Shop Paper specially designed for External Service Operations.
In Order, in Print option, go to Operation Selection, select the required operation & select the print layout which is designed for External Service, so that, you can get the print out according to additional fields requirements.
regards,
Maheswaran. -
Massive printing of maintenance orders
Hi forum,
When I try to print two or more maintenance orders in IW38 the system just adds the system status PRT (printed) to the orders without printing them, what have to customize in SPRO for massive printing?
Regards.Thanks Rakesh
In OIDI I have not Print diversion active for my shop paper, should I activate the print diversion?
OIDH is as follows:
Applic. area: O
User: *
Planning plant: RAY3
Planner group: *
Shop paper: ZPMP
OutputDevice: Windows Default Printer
No. of copies: 1
Storage Mode: 1
Checkboxes selected: New spool request and Print immediately
Please comment
Regards -
Dear Masters,
Can you please guide me how to set the print layout of the order? My client's requirement is, they want a hard copy of the order to be printed as per their required layout.
Is it possible to do so? What is a Shop paper? Is it the same we have to use it for this? If yes, how?
Thanks in advance.Hi,
In OIDF, define the shop papers designed by ABAPer for your requirement.
Then in OIDG, based on order type, you can differentiate the shop papers to be printed. If you going for common shop paper for all order types, mention * in document type.
In OIDH, based on user, you can define the shop papers to be printed. So that, that user can print only the allowed shop papers.
Regards,
Maheswaran. -
What is meant by Print Shop Papers
Hi ,
What is meant by Print Shop Papers?. What is its use?.
Thanks in advanceDear ,
Print Shop Papers : It is one of gthe custom developement based on your Standard Production Orders .In any manufacturing plant , when Production Engineer and his team have certian product developement , they need a comprehensive production information like Bill Of Material , Operation sequence , Operation Hrs , Prodiuctuion order reservation number , MTO means MTO sales Order number , customer information if required , Operation Star and Ened datses , times , Production Schedule Start /Ened etc .A shop paper contains those above information and SAP system has Print Programme to rtigger those shop papaers through Stanrda Txn like CO02/CO04N or any Z tsxn by your ABAPer.
Specially , it will be with Production Supervisor at Shop floor where production is happening and will be followed those instruction interms of material to operation till the completion of the order.
Carry out a SND search in SDN PP forum , you will find number of wiki , theards having technical information related to Print Shop Papaers .
All the best
Regards
JH
Maybe you are looking for
-
Advise on SQL database process
Dear all, We have build our own product CMS platform configuration which is running on SQL server and CMS web site link to it. We will lauch our product soon but need to identify the correct hosting plan for not having any further issue. For exemple
-
HT1386 My itunes is not syncing over wifi its written it will resume if ok 25aa5523a198
I had sync this before but it shows an error now : sync will resume when ok-25AA5523a198 is avaible
-
Passing on old 3G to someone else after reset won't work on iTunes
I upgraded from my 3G so I got it unlocked , reset it back to factory settings and sent it to my son In Belgium. I am in Australia. He can't get it to work on his iTunes anyone know what he can do. Thanks. The 3G is just over 2 years old
-
Entry history for input file fields
Hi Experts, We have a requirement to display the entry history for the two fields below. Generally when we enter some value in field and later when we put a space bar then we will be able to get list of values already used for that respective field.
-
What to do if dropped my iPod touch in cleaning chemicals?
Sooo i dropped my ipod in some mr.clean without noticing and it was like a spill of it but my screen was already cracked then my screen started flickering now i cant turn it back on !!!!!!???? >_< Please help