Shopping cart not editable when status is "awating for approval"

Hi SRM Experts,
All the shopping carts which are "awaiting for approval" can be editable as per SRM. I am not able to edit any shopping cart which is awaiting for approval.
Please note that there are no follow on documents have been created.
Is there any settings we need to do for eanbling the change icon in shopping cart.
Thanks
Ravi

Hi Kathirevel,
Still i am not able to edit the shoping cart. Even i am not able to see change button whenshopping cart statu is " awaiting approval".
I have done the same steps which you have explained in above thread.
Please suggest me
Thanks
Ravi

Similar Messages

Shopping cart not appearing in users sourcing cockpit for completion

Hi
A user cannot see his shopping carts in his sourcing cockpit in his worklist. He finds them with the find tab but he cannot mark them as complete. The completion check box column is not there. However another colleague can find these shooping carts and the completiong column is there. Why this occur?
Does it have anything to do with where the user is placed in the org. struture? Please advise.
Kind regards

Hi,
seems that the requirement is assigned to a different Pgroup. Therefore one user does see it, and the other one not. When you adjust the assignment in the Org Model, the user will see the requirement.
Check the responsibility and assignment of your Pgroups.
Cheers,
Claudia

Shopping cart (not a u201Climitu201D) can not be found in Sourcing Area!!

Issue:
Shopping cart (not a u201Climitu201D) can not be found in Sourcing Area to create a new PO, if the associated PO has been deleted directly at Header level.
But, shopping carts (not a u201Climitu201D) can be found in Sourcing Area to create a new PO, if the associated Pos have been deleted at Line Item level first and Header level next.
Hence, POs can not be deleted at Header Level directly, but only at line item level first and header level next.

Hello Uma,
If PO is deleted at header level then SC can be found in sourcing cockpit only if for a SC
1. SOURCE_REL_IND = X in table BBP_PDIGP and
2. Quantity should not be completely consumed by the PO in table BBP_PDIGP.
Check these 2 parameters for your SC in BBP_PD.
When we delete PO at header level SC quantity is consumed by the PO and thats the reason it will not appear in sourcing cockpit.
You can also go through the logic in report CLEAN_REQREQ_UP, you will find these details. This report decides whether SC should appear in Sourcing cockpit.
Thanks,
Shital Nimje
Edited by: Shital Nimje on Sep 22, 2009 4:10 PM

Shopping cart not returning to SoCo even after PO and confirmation deleted

Shopping cart not returning to SoCo even after PO and confirmation are deleted.
Steps followed:
Created shopping cart
SC approved
Assigned vendor in sourcing and created PO(PO created successfully created in ECC)
Confirmation created
Deleted the conformation
Deleted the PO
When PO is deleted SC should return to Sourcing Cockpit, but it is not returning.
Checked the table BBP_PDIGP, source_del_ind is space.
Ran BBP_GET_STATUS_2 and CLEAN_REQREQ_UP both the programs manually but in vein.

Hi,
Can you try by just deleting the PO? Dont delete the confirmation.
I think once you have done the confirmation, the SC will not come back to SOCO. (Logically if you see, confirming means you have already received goods, so after receiving goods, I dont think SC will be visible again in SOCO)
Nikhil

Enable 'process all items' option in shopping cart display/edit screen

Hi All,
'Process all items' option is disable in the shopping cart view/edit screen. How can I enable the said option ?
It there any authorization object or attribute needed for enable 'process all items' option ?
For your information, this botton is appear next to Delete option in shopping cart item level.
Thanks,
Regards,
Jennifer

Hi,
if you want to enable or disable any option or field in SRM portal find the web component of the field by right clicking on it, Then enhance the web component and in the post exit of WDModify_view add the code for enabling or disabling the field.
Which will definetly work.
Regards,
Goutam Kolluru.

Hi,When I submit the budget for approval, it is approved and base lined when we submit it for approval. It does not go in approval hierarchy. We want it to flow through approval hierarchy.

Hi,When I submit the budget for approval, it is approved and base lined when we submit it for approval. It does not go in approval hierarchy. We want it to flow through approval hierarchy.

Hi Amit,
if I understand correctly, you just need for a particular object a tooltip to be showed.
There is no such functionality hence you used the trick of using a hyperlink, which if clicked generates undesired behavior.
Hyperlinks don't allow themselves to be disabled, therefore if you are using that workaround you must cope with that.
I would suggest to create an Idea at [https://ideas.sap.com] for having in the properties of an object a tooltip, then post the link to the idea here and other users will vote if they like the idea.
Thanks and regards,
Simone

Function to change CATS status to released for approval

I have a requirement where I need to change in batch cats records from status 10 to status 20 'released for approval'
I can't find how to change the status in BAPI_CATIMESHEETMGR_CHANGE
and another function CATS_APPROVAL only works for approving or rejection of records.
is there another bapi or function which I can use to change the record status of cats ?
or the other way around is also acceptable that I can set the status back from '20' released for approval to '10' locked.
kind regards
arthur de smidt

when debugging cat2 I found a form which handles the release for approval. but I'm nog sure if there is more to it. for so far I can see it updates the status directly and that's it. when I go further on I come in the screenpainter prog. any clues if it's normal to use this code for my own abap ??
further on I don't understand the function of ASSIGN_FIELDS_IN_ICATSD ?
can somebody explain this one ??
include : LCATSF33
      FORM FREE_ONE_CELL                                            *
      free one cell on dynp                                         *
FORM FREE_ONE_CELL USING U_NUMBER
                         U_WORKDATE LIKE CATSDB-WORKDATE.
assign the correct fields
PERFORM ASSIGN_FIELDS_IN_ICATSD USING U_NUMBER.
IF <STATUS> = STATUS-LOCK OR <STATUS> = STATUS-REJE.
count records
    TOTAL_RECORDS = TOTAL_RECORDS + 1.
date in the future ?
    IF TCATS-FUTURE IS INITIAL.
      IF U_WORKDATE > SY-DATLO.
        FUTURE_RECORDS = FUTURE_RECORDS + 1.
        MESSAGE S024 WITH FUTURE_RECORDS TOTAL_RECORDS.
        EXIT.
      ENDIF.
    ENDIF.
    READ TABLE ICATSDB WITH KEY MANDT = SY-MANDT
                                WORKDATE = U_WORKDATE
                                COUNTER = <COUNTER>
                                BINARY SEARCH.
    IF SY-SUBRC = 0.
      ICATSDB-STATUS = STATUS-FREE.
      IF ICATSDB-ACTION IS INITIAL.
        ICATSDB-ACTION = ACTION-UPDATE.
      ENDIF.
      MODIFY ICATSDB INDEX SY-TABIX.
      <STATUS> = STATUS-FREE.
set global marker that data have been unlocked
      FREE_DATA = YX.
    ELSE.
      MESSAGE X030.
    ENDIF.
ENDIF.
ENDFORM.
kind regards
arthur

Header status say "waiting for approval".

Hello Team,
We have contract with 10 line items. All line items are approved. ie the status say approval finished.
However in the header status say "waiting for approval".
We have approval at header level.
System details we have SRM 7.01 ie Ehp 1.
Thanks in advance.
With Regards
Divakar V

Hi,
Check in IMG >>>> "Check Event Type Linkage" check whether "linkage enabled" got unchecked or not.
Ganapathi

Travel Expenses not reaching to the superiors UWL for approval

Hi,
When an employee creates a Travel Expenes on approve Travel Request, the Travel Expenes does not reach to his superiors Inbox for approval.
As well as while checking in SAP R3, via Tcode - swia, the said Travel Expenses not appearing in the list.
Pl help.
Regards
S J Rajam

Hi,
In continuation with Rajagopalan message, please also check whether the reporting relationship is maintained correctly and the validity date. Communication id are maintained in IT 0105.
Hope this helps,
Regards.
S.Srikanth

Approved shopping carts not displayed in shopping cart status report

Hi Gurus
we are facing an issue in shopping cart status report. When the approver selects 'Approved by me' in shopping carts status report system is not showing any list. There are number shopping carts approved by the user . Other selection like selection period, status , completed indicator were selected properly. But if the approver selects 'Rejected by me' the system is showing all the shopping carts approved, rejected, and awaiting approval related to the approver.
This is happning with one user only. We had checked user authorization and parameters and every thing is fine . Aslo compared the same with other users for whom this report is working fine . We are in SRM 5.5 extended caassic senario.
Any suggestions/solutions on this
VB SAS

In olden days of SRM , we forcily assign account assignment for PR which do not have accounting data in the PR to create a successful SC in SRM and remove the account assignment while creating a PO in the backend.
but since your in SRM 7.0
and also you made ensure that your PR has account assignment but it is not sitting in the cockpit.
and your shopping card trying to create a PO and failed right?
since it has incomplete data , how PO is creating. How system can create a PO without vendor.
escalate to SAP bvia OSS message
BR
Muthu

Saved Shopping Cart Display/Edit functions are not working

Hello SRM experts,
The problem that I have is that the buttons like Display, Edit, etc are not working on a saved Shopping Cart. What is the best way to debug this problem? How would I find out what methods are being called on the SRM system or if some entries are missing in some table for BUS2121?
We are on SRM 7.0 PPS SPS 5, Portal 7.01 SPS 5.0.
Thanks,
Mani

Hi Mani,
We are also facing a similar issue. Our protocol is HTTP throughout but still the issue persists.
Can you shed some light on any other config that you changed?
Regards,
Nikhil

Shopping cart not in sourcing cockpit

Hi
I created a shopping cart. It has been approved and shows as status approved when I search for it in "monitor shopping cart". I have checked the source_rel_ind and this is X. But when I check the sourcing cockpit, my shopping cart is not there.
I checkedthe application logs too and there is nothing in there.
Any idea where the shopping cart could go to?
Kind regards

Hi,
What is your scenario?
Do you remember for which product category this SC is created?
Check your config in both these places : Define objects in backend system and Sourcing --> Define sourcing for product categories.
Based on these two config in SPRO the SC will be converted into PR, PO or will be in sourcing cockpit if you dont have any other technical BADI's available.
See BBP_PD and check for the status whether it is approved or item in transfer process or followon document created and then look into monitor shopping cart.
Best regards,
Sridhar.

Shopping cart not creating follow-on documents

Hi,
We were using extened classic for some time in test system and now deactivated extended classic and want to work with classic scenario. However when i create shopping cart for the material it is not creating any follow-on documents like reservation or purchase requisition or PO.
Can anyone guide me for possible reasons.
Thanks & Regards,
Ganesh

Hi Suresh,
I am able to create Reservation and/or Purchase Requisition for the shopping cart after maintaining the backend system for product category, but when i am creating shopping cart which should create PO, i am getiing error and status of shopping cart is "Error in Process".
After going through the transaction BBP_PD, the alert is as below-
Alerts that Could Belong to this Document:
Monitor            Shopping Basket\Backend application errors
Date               20.01.2006
Time               08:49:44
Message ID         BBP_ADMIN 016
Message text       Shopping cart &1 (PO &2): &3
Argument 1         5000000668
Argument 2         3300000002
Argument 3         MEPO                085Check item number 0 in tabl
Argument 4         00000000000000000000000000000000
Monitor            Shopping Basket\Backend application errors
Date               20.01.2006
Time               08:49:44
Message ID         BBP_ADMIN 016
Message text       Shopping cart &1 (PO &2): &3
Argument 1         5000000668
Argument 2         3300000002
Argument 3         06                010Document contains no items
Argument 4         00000000000000000000000000000000
Monitor            Shopping Basket\Backend application errors
Date               20.01.2006
Time               08:49:44
Message ID         BBP_ADMIN 016
Message text       Shopping cart &1 (PO &2): &3
Argument 1         5000000668
Argument 2         3300000002
Argument 3         MEPO                071Item 00010 does not exist
Argument 4         00000000000000000000000000000000
Can you throw some light on this, to solve the problem.
Thanks & Regards,
Ganesh

Custom fields from Shopping cart not getting transferred

We have added a few custom fields in both Shopping cart and PO screens.
Somehow when a cart is getting converted to a PO, the values maintained in the shopping cart are not flowing in to the PO.
Please advice as to what needs to be done to take care of this issue.
Thanks.
Anuradha SenGupta.

Hello Anuradha,
Please go thru the link .
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27?QuickLink=index&overridelayout=true
Also in your badi BBP_CREATE_BE_PO_NEW, try to implement the code in the similar way which I did for creating PR in Backend.
DATA : ls_req_item TYPE bapi_te_requisition_item.
LOOP AT is_sc_document-item INTO wa_sc_item.
    wa_extension-structure        = 'BAPI_TE_REQUISITION_ITEM'.
    ls_req_item-preq_item         = wa_sc_item-number_int.
    ls_req_item-z_req_type_db     = wa_sc_item-z_req_type_db.
    wa_extension-valuepart1       = ls_req_item.
    APPEND wa_extension TO cs_rq_document-it_extensionin.
    CLEAR wa_extension.
    ls_req_item-preq_item         = wa_sc_item-number_int.
    ls_req_item-z_asset_sub_cat   = wa_sc_item-z_asset_sub_cat.
    wa_extension-valuepart1       = ls_req_item.
    wa_extension-valuepart2       = ls_req_item.
    APPEND wa_extension TO cs_rq_document-it_extensionin.
    CLEAR wa_extension.
ENDLOOP.
Hope this will help you.

Add Tax-Code in Shopping Cart... when we create PO

Hi,
Area: SRM 5.0, Classic Scenario.
Friends, I am asked to add Tax-Code in the Shopping cart to be used in the PO creation in R/3.
Was asked to use a BADI. We dont have tax created in the Shopping carts. The Tax ix not calculated here, so the Tax-Code would be IO. And even I am allowed to Hardcode this tax-code 'IO' and send it while a PO is created.
1.Now, which BADI can i use to add the tax-code to shopping cart ?
I have seen that, in the BBP_GET_SC_DETAILS function module the E_TAX is completely empty while lt_items has all the line items.
2. Now, do I have to Pass all the line items to this E_TAX from lt_item including tax_code as some hardcode value ?
All Helpfull Answers Will be Rewarded.
Thanks & Regards,
Ashwin.

Hi Ashwin,
Try with the following code.
data : ls_po_acc TYPE bbps_badi_po_account_1,
         ls_po_accx TYPE bbps_badi_po_accountx_1.
LOOP AT cs_po1_document-it_poaccount INTO ls_po_acc.
       ls_po_acc-tax_code = 'IO'.
       MODIFY cs_po1_document-it_poaccount FROM ls_po_acc TRANSPORTING tax_code..
ENDLOOP.
LOOP AT cs_po1_document-it_poaccountX INTO ls_po_accX.
       ls_po_acc-tax_code = 'X'.
       MODIFY cs_po1_document-it_poaccountX FROM ls_po_accX TRANSPORTING tax_code..
ENDLOOP.
Reward points if useful.
Regards,
Kayal
Note : The code above has to be written in method FILL_PO_INTERFACE1 of Badi BBP_CREATE_BE_PO_NEW
Edited by: Kayal Priyadarshini on Mar 11, 2008 4:33 AM

Shopping cart not editable when status is "awating for approval"

Similar Messages

Maybe you are looking for