Short dump in quality

Dear All,
Hope all are doing fine ..Am struck with some issue.
Am getting short dump in Quality system because of excess time limit in the following select statement.
data: l_size type i value 1000.
SELECT vbeln
         posnr
         matnr
         werks
         ps_psp_pnr
         APPENDING TABLE it_vbap
         FROM vbap
         PACKAGE SIZE L_SIZE
         FOR ALL ENTRIES IN it_vbak
         WHERE vbeln EQ it_vbak-vbeln
         AND lsmeng EQ space
         AND matnr IN r_matnr
         AND werks IN r_werks.
   ENDSELECT.
Pls. suggest me alternatives to get out of this short dump in the select statement....
Thanks & Regards
Jack

Dear RichHeilman,
Thanks alot for your great response..
am pasting the code which will be more easier for you to rectify my dump.
In Quality it_vbak has 80,000 records ,, the moment it reaches to it_vbap it goes to dump for having excess time limit.
SELECT vbeln
         vkorg
         vtweg
         spart
         kunnr
         INTO TABLE it_vbak
         FROM vbak
         WHERE vkorg IN so_vkorg
         AND vtweg IN r_vtweg
         AND spart IN r_spart
         AND kunnr IN r_kunnr
         AND bukrs_vf EQ p_bukrs.
IF NOT it_vbak[] IS INITIAL.
    SELECT vbeln
           posnr
           matnr
           werks
           ps_psp_pnr
           APPENDING TABLE it_vbap
           FROM vbap
           PACKAGE SIZE L_SIZE
           FOR ALL ENTRIES IN it_vbak
           WHERE vbeln EQ it_vbak-vbeln
           AND lsmeng EQ space
           AND matnr IN r_matnr
           AND werks IN r_werks.
     ENDSELECT.
ENDIF.
Thanks in advance
Jack

Similar Messages

Short Dump for Query in Quality server

Hi Experts,
i have a query, when i execute it in developement server, it successfully execute. But when i execute the same query in Quality,
it gets short dump, giving following error.
ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION
previously it was working fine in quality, but suddenly it gets shortdu while executing.
i transported again, but error still persists.
i tried execute this query in RSRT also, where it stops at a break point.
this query uses a custimer exit variable, but this variable is not the reason for short dump. without this variable also same error occurs.
please help me to resolve this.
Thanks
Saurabh

Hi,
Please try to provide max input in the variable screen, Don't execute the query based on single selection criteria. And also please perform cube compression before executing the query.
Hope this will solve the issue .
Thanks
PT

Getting short dumps while reading bulky data from excel sheet

Hi all,
We have converted our non-unicode based sap system (R/3 4.7, Windows 2003,
SQL 2000) into a unicode based system recently. We are facing two peculiar
problems for last few days.
*Problem 1 - *Whenever we want to upload the data from excel sheet, the
system throws a dump after reading about 400 entries, while last week the
same system used to read about 8000 entries in a single go.
*Problem 2 - *Also, whenever we realease a transport requst from development
containing a lot of changes, the request will reach the quality system but
without the changes. but if i ll try to import the changes into quality
system after generating more than one request containing small small
changes, they get reflected in QAS immediately. Is there any size
constraint in transporting a request fro DEV->QAS->PRD.
Please suggest some ways.
I am pasting the dump (that I am getting while data uploading from Excel).
~~~~~~~~~~~~~~~~~~
Runtime errors
MESSAGE_TYPE_X*
Occurred on
22.02.2008 at
13:21:02*
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
Short text of error message:
Control Framework : Error processing control
Technical information about the message:
Diagnosis
An error occurred when the system tried to process the commands
from the Automation Queue on the presentation server.
There are several possible reasons for this:
- The installation of the SAP GUI on the presentation server is
faulty or obsolete.
- There is an error in the application program
- There is an error in the SAPGUI or an integrated control
Procedure
1. Make sure that you have imported the appropriate Support
Package, the current kernel, and GUI patch for the release of your
System
2. Check whether the error occurs locally on one or a few PCs, or
generally on all PCs. Note whether the error only occurs for some
users, for example because of a specific Customizing setting.
If it only occurs locally, this suggests an installation problem
with the PC. Check the installation; if necessary, reinstall the
software. In the dump, search for the SY-MSGLI field, since it may
point to the cause of the error.
3. Activate the Automation Trace (in accordance with SAP Note
158985).
4.Start the transaction and continue until the screen immediately
before the dump.
5. From the System -> Utilities menu, choose Autom. Queue,
Synchronous Processing.
The status bar of the GUI displays the text:
"Automation synchron flush mode on"
6. If you now proceed with the application, the short dump will
display the ABAP call that caused the error; the Automation Trace
will contain the error on the presentation server.
7. If necessary, load the short dump and trace files on to
sapservX, so that SAP can analyze them.
Message classe...... "CNDP"
Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLOLEA" or "LOLEAU02"
"AC_SYSTEM_FLUSH"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "nhbho930"
Network address.......... "192.168.0.30"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "NHBHO930"
Database type............ "MSSQL"
Database name............ "DEV"
Database owner........... "dev"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 17 2007 00:18:58"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "196"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 300
User................ "NHBABAP"
Language key........ "E"
Transaction......... "SE38 "
Program............. "SAPLOLEA"
Screen.............. "SAPMSDYP 0010"
Screen line......... 0
Information on where terminated
The termination occurred in the ABAP program "SAPLOLEA" in
"AC_SYSTEM_FLUSH".
The main program was "ZBDC_CONTRACT ".
The termination occurred in line 29 of the source code of the (Include)
program "LOLEAU02"
of the source code of program "LOLEAU02" (when calling the editor 290).
~~~~~~~~~~~~~~~~~~~~~
Thank you all.
Cheers.
Mitra __.____._

for the 50 millionth time: Excel spreadsheets are NOT databases, you should NOT try to use them as such and NEVER access them using JDBC.
You should also under NO condition use the JDBC-ODBC bridge driver (that was actually the 78 millionth time that was told someone).

Short Dump while Activating a Heirarchy

Hi Experts,
I have a hierarchy which is in M version, I am trying to copy hierarchy from Quality to Dev system.
The hierarchy in DEV system is in M version. When I try to activate the Hierarchy I am getting a short dump which I am not able to understand.
I have tried also with the ABAP programe to activate it but still I am getting this.
Sorry to paste all the dump but can any one advise what could be reasons behind heirarchy not getting activated.
Thanks,
Tati.
Please find the Dump message.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    Only message types A, E, I, W, S, and X are allowed.
Information on where terminated
    Termination occurred in the ABAP program "CL_RSSH_MESSAGE_HANDLER=======CP" -
     in "CALL_MESSAGE".
    The main program was "RSSH_HIERM_START_NEU ".
    In the source code you have the termination point in line 11
    of the (Include) program "CL_RSSH_MESSAGE_HANDLER=======CM003".
Source Code Extract
Line SourceCde
    1 METHOD call_message .
    2
    3   FIELD-SYMBOLS: <l_s_msg> TYPE gt_s_msg.
    4
    5   READ TABLE p_t_msg INDEX 1 ASSIGNING <l_s_msg>.
    6   IF sy-subrc <> 0.
    7     MESSAGE x000.
    8   ENDIF.
    9
   10   <l_s_msg>-handled = rs_c_true.
>>>>>   MESSAGE ID <l_s_msg>-msgid TYPE <l_s_msg>-msgty NUMBER <l_s_msg>-msgno
   12     WITH <l_s_msg>-msgv1 <l_s_msg>-msgv2 <l_s_msg>-msgv3 <l_s_msg>-msgv4.
   13
   14
   15 ENDMETHOD.                    "CALL_MESSAGE

Hi Prasad,
Have you changed the 'Object Status' from INA to ACT when using the program RSDG_TRFN_ACTIVATE?
You can also refer to the note SAP Note 1030987 - Activation of transformations dumps
regards,
Ashvin

Short dump GETWA_NOT_ASSIGNED while transporting Datasource in BI 7.0

Hi Friends,
I am getting an error, while trying to transport Datasource into quality system. The Transport request log says that "Program terminated (job: RDDEXECL, no.: 11372100)"
If I check the log in SM37 of target system it gives following steps
29.06.2007 11:37:21 Job started
29.06.2007 11:37:21 Step 001 started (program RDDEXECL, variant , user ID DDIC)
29.06.2007 11:37:21 All DB buffers of application server bdhp4488 were synchronized
29.06.2007 11:37:30 SQL: 29.06.2007 11:37:30 DDIC
29.06.2007 11:37:30 CREATE UNIQUE INDEX "/BIC/B0000566001~0" ON
29.06.2007 11:37:30 "/BIC/B0000566001" ("REQUEST", "DATAPAKID",
29.06.2007 11:37:30 "PARTNO", "RECORD") PCTFREE 10 LOCAL INITRANS 002
29.06.2007 11:37:30 TABLESPACE PSAPSR3 STORAGE (INITIAL
29.06.2007 11:37:30 0000000016 K NEXT        0000000160 K MINEXTENTS
29.06.2007 11:37:30 0000000001
If I see the short dump in ST22 in target system (quality) The I get error
"Runtime Errors         GETWA_NOT_ASSIGNED"
Could somebody help me in resolving this?
Thanks and regards,
Balaraj

Thanks Edwin,
My issue is still not resolved.
Now the error that I am getting while transporting the Transformation is
Program terminated (job: RDDEXECL, no.: 12091300)
The SM37 job log says that
"Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server bdhp4488 were synchronized
ABAP/4 processor: GETWA_NOT_ASSIGNED
Job cancelled"
When i see the dump in ST22. It says that it could not find entry in one of the tables
"   READ TABLE p_t_mapping ASSIGNING <fs_map>
   WITH KEY target_stepid = 0
            targetsegid   = <fs_posit>-rulesegid
            targetposit   = <fs_posit>-ruleposit
            targetid      = 0.
Sy-subrc <> 0 for this read.
Could you please advise?
Thanks and regards,
Balaraj

Short dump while executing the DTP

Dear Experts,
While executing the DTP the system is generated short dump and it is Quality server not in Development system.
The error details are in method Calculate_keyfigure_ds and the data is loaded for IS retails from POSDM.
The error details:
"The MOVE-CORRESPONDING statement can only be used on operands with a
structured type.
In the case at hand, this condition is not fulfilled: Operand "<L_STRUC>" has
the type "C"."
Regards,
Amit

Hi Amit ,
Move corresponding statements can be used for structures only and from the error message it seems that there is datatype mismatch.
Check for the errors ion link :
http://help.sap.com/abapdocu/en/ABAPMOVE-CORRESPONDING.htm
Hope it helps ,
Regards,
Supriya

Short dump in SAP R/3: SQL statement buffer overflow?

Hello,
I hope someone can help us with the following problem:
A short dump in SAP R/3 (DBIF_RSQL_INVALID_RSQL, CX_SY_OPEN_SQL_DB)
occurred during a delta load, which worked fine for several month.
The custom code crashes at a FETCH NEXT CURSOR statement.
I assume, it might be a SQL statement buffer overflow in SAP R/3?
The problem can be reproduced by RSA3, and is therefore not time-dependent.
The problem did not occur before or on the quality assurance system.
Cursor code:
      Read all entries since last transfer (delta mechanism)
        OPEN CURSOR WITH HOLD s_cursor FOR
          SELECT * FROM ekko
            WHERE ebeln IN t_selopt_ekko.
t_selopt_ekko has up to 60.000 data sets, which worked fine in the past.
It is very likely that the amount of data during the first crash did not exceed this.
SQL-Trace of RSA3 call:
It seems that 25150 data set can be processed via fetch before the short dump occurs
After that object SNAP is written:
"...DBIF_RSQL_INVALID_RSQL...dynpen00 + 0xab0 at dymain.c:1645 dw.sapP82_D82
Thdyn...Report für den Extraktoraufruf...I_T_FIELDS...Table IT_43[16x60]TH058FUNCTION=
RSA3_GET_DATA_SIMPLEDATA=S_S_IF_SIMPLE-T_FIELDSTH100...shmRefCount = 1...
...> 1st level extension part <...isUsed       = 1...isCtfyAble   = 1...> Shareable Table Header Data
<...tabi         = Not allo......S_CURSORL...SAPLRSA3...LRSA3U06...SAPLRSA3...
During dump creation the following occurs:
"...SAPLSPIAGENTCW...CX_DYNAMIC_CHECK=...CRSFH...BALMSGHNDL...
DBIF_RSQL_INVALID_RSQL...DBIF_RSQL_INVALID_RSQL...DB_ERR_RSQL_00013...
INCL_ABAP_ERROR...DBIF_INCL_INTERNAL_ERROR...INCL_INTERNAL_ERROR...
GENERAL_EXC_WITHOUT_RAISING...INCL_SEND_TO_ABAP...INCL_SEARCH_HINTS...
INCL_SEND_TO_SAP...GENERAL_EXC_WITHOUT_RAISING...GENERAL_ENVIRONMENT...
GENERAL_TRANSACTION...GENERAL_INFO...GENERAL_INFO_INTERNAL...
DBIF_INCL_INTERNAL_CALL_CODE..."
Basis says, that the Oracle data base works fine. The problem seems to be a SAP R/3 buffer.
Does anyone had a similar problem or knows where such a buffer might be or how it can be enlarged?
Best regards
Thomas
P.S.
Found a thread that contains part of the dump message "dynpen00 + 0xab0 at dymain.c:1645":
Thread: dump giving by std prg contains -> seems not to be helpful
Found a similar thread:
Thread: Short dump in RSA3 --Z Data Source -> table space or somting else?
Edited by: Thomas Köpp on Apr 1, 2009 11:39 AM

Hi Thomas,
      Its due to different field length.
Just check it out in code after FETCH NEXT CURSOR what internal table you have mention.
that internal table shoul deffined by taking refrence of ekko, because your code is
OPEN CURSOR WITH HOLD s_cursor FOR
SELECT * FROM ekko
WHERE ebeln IN t_selopt_ekko.
hope you got solution.
Regards,

Initial customizing loads (DNL_*) causing short dumps in R/3

Hi,
I'm trying to run the initail loads for the DNL_* customizing objects. When I start a load in R3AS and check the status in R3AM1, it shows "Running". In the CRM oubound queue (SMQ1), there is an entry for the load with status SYSFAIL. The detailed status message is "The current application triggered a termination with a short dump".
The short dump in R/3 shows an error "No external system (such as CRM) connected" which occurs in function module CRM_FIRST_CALL_OPERATIONS. Looking at the code, there seems to be a problem with the CRMRFCPAR table. I had only one record in this table for object CUSTOMER_MAIN, so I tried adding a record with Object Name "*" and Load Type "I", but this had no effect.
What is the proper configuration of table CRMRFCPAR for customizing loads? Is it possible that this error is related to some other config or a problem with the RFC connection? These loads work fine in our quality system which is configured the same as production (as far as I can tell).
Thanks.
Martin

hi,
Maintaining Table CRMRFCPAR (SAP R/3)
The parameters in this table indicate the RFC destinations which receive data. The required parameters include, for example: consumer, client, object name, and download type.
You can send data to a certain consumer only in an initial download and not in a delta download by making the appropriate specifications for the data exchange.
User- That uses the OLTP plug-in functions as data receivers
Object name -Object name
Destination -Specifies the destination of the CRM server
Load Type -Restricts CRMRFCPAR entries to the initial (I) or delta (D) download.
Out Queue - Name RFC outbound queue
In Queue -Name RFC inbound queue
BAPI name
INFO -Information/Comments
InQueue flag- Controls whether qRFC inbound queues are used on the CRM server
Send XML -XML supports (Should data be sent in XML format?)
Stop data -Causes the OLTP System to place data into the outbound queue.
Regards
sri

Short dump with error RSW_CURRENCY_TRANSLATION while loading SRM data

Hi All,
I am loading data from SRM to BW. From data source 0BBP_TD_CONTR_2 to DSO 0SRCT_DS1. Data is loaded from source to PSA. When loading from PSA to DSO using DTP, I am getting a short dump with below error. Can one please let me know solution if you have faced the same problem previously?
Termination occurred in the ABAP program "SAPLRSW0" - in
"RSW_CURRENCY_TRANSLATION".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 86
of the (Include) program "LRSW0U09".
The program "SAPLRSW0" was started as a background job.
I have checked the DSO routines and objects, everything is ok. Replicated all currency conversion tables from source.
0PSTNG_DAT infoobject is also active. There is no errors in Development while loading, when moved to quality, the error is throwing.
Regards,
Don

Hi All,
We need to activate 0SR_DEFCUR currency object. I have activated the object and transported. Issue is resolved.
Thanks to all for your kind replied.
Regards,
Don

Short dump error in program SAPMV50A after modification

Dear gurus
i have done some modification in vl02n through Badi and it is working fine in Development server.
when i transport it to quality server and test it
it giving a short dump in vl02n while vl01n is working perfectly fine and showing my modification too..
below is the error mentioned
Database error text........: "Unsupported database type in parameter/column
    (168)."
   Internal call code.........: "[RSQL/READ/LIKP ]"
   Please check the entries in the system log (Transaction SM21).
   If the error occures in a non-modified SAP program, you may be able t
   find an interim solution in an SAP Note.
   If you have access to SAP Notes, carry out a search with the followin
   keywords:
   "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
   "SAPMV50A" or "MV50AFDB"
   "LIKP_SELECT"
   If you cannot solve the problem yourself and want to send an error
   notification to SAP, include the following information:
Please help
Regards
Saad Nisar

i have created two append structure in standard tables of LIKP & LIPS which are activated and so as LIKP and LIPS
my Badi is also activated and my customized program is also activated.
While making outbound delivery in Quality server it works fine but when i want to make changes in that created delivery it throws dump error
short text
   SQL error in the database when accessing a table.
issing RAISING Clause in Interface
   Program                                 SAPMV50A
   Include                                 MV50AFDB
   Row                                     14
   Module type                             (FORM)
   Module Name                             LIKP_SELECT
rigger Location of Exception
   Program                                 SAPMV50A
   Include                                 MV50AFDB
   Row                                     20
   Module type                             (FORM)
   Module Name                             LIKP_SELECT

CJ20N Network creation issue. Short Dump MESSAGE_X; CNPB 011

Hello,
I need your help please.
We have an issue on CJ20N.
We have a short dump MESSAGE_TYPE_X with error message "CNPB 011" in any way we create network on CJ20N (1/ By right click => Network or 2/ Right
click => Copy network or by 3/ drag and drop from templates)
It's noted that:
=> the problem not occurs when we create the network from CN21.
=> We didn't have this problem before.
To avoid the dump and be able access to project, we execute the program that described on note OSS 445323 "Z_DELETE_AFVC_MISSING_AFKO".
After analysis, it turns out that: Records are created on AFVC, AFVV, AFAB, AFVU, JEST, JSTO, etc. BUT NO NETWORK EXISTS IN AFKO for the AUFPL. SO, all is correctly created expect AFKO update.
Can you please help me to see clearly? We don't understand why we have this dump at network creation from CJ20N mainly we didn't have this problem
before.
Thank you in advance for your help,
Amal

Hi Amal,
I would suggest to do the following:
1. Are you getting this DUMP in all of your Clients DEV, Quality and Production?
2. Check if any transport has been moved to Production lately which might have disturbed some settings in PRD Environment if it is happening only in Production Environment.
3. If you are getting DUMP in all of the environments Please raise an OSS with SAP. As what you have described seems to be a Program Bug.
Hope it helps..
Cheers
Sammar

SMARTFORM short dump

I've made few changes to SMARTFORM in development and imported to quality.
when I tried to display same form in quality, getting short dump with below message
Error when importing object "T_NTOKENS"
and the error is coming in standard FM SSF_READ_FORM at below code..
import t_ntokens from database stxfcont(xx) id i_formname
Please suggest me how can I fix this error.
Thanks

OSS note is not relevant to my issue.
Runtime Errors         IMPORT_ALIGNMENT_MISMATCH
Exception              CX_SY_IMPORT_MISMATCH_ERROR
Date and Time          21.02.2012 14:12:34
Short text
Error when importing object "T_NTOKENS".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTXBX" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "SSF_READ_FORM" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing object "T_NTOKENS", the structure did not match the
structure of the target object. The error occurred in component
no. 2.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
Source Code Extract
Line
SourceCde
20
21
data: l_stxfadm type stxfadm.
22
23
Test, ob das Formular überhaupt existiert
24
Lesen der Verwaltungsdaten
25
select single * from stxfadm into l_stxfadm
26
where formname = i_formname.
27
if sy-subrc = 0.
28
o_admdata = l_stxfadm.
29
else.
30
raise no_form.
31
endif.
32
33
Lesen des Formulars gemäß der geforderten Fassung
34
falls die gesicherte Fassung nicht existiert, wird die aktive Fassung
35
gelesen
36
perform init_datatabs.
37
38
o_active = i_active.
39
40
if i_active = space.                 " gesicherte Fassung
41
import t_ntokens t_objt t_ltext
42
from database stxfconts(xx) id i_formname
43
ignoring conversion errors.
44
if sy-subrc <> 0.
45
select * from stxfobjt into table t_objt
46
where formname = i_formname.
47
select * from stxftxt into table t_ltext
48
where txtype   = c_text_form
49
and formname = i_formname.
>>>>>
import t_ntokens from database stxfcont(xx) id i_formname
51
ignoring conversion errors.

Short dump in production

Hello Friends,
I have a z table and it is working fine in development and quality system and it is giving short dump error when I try to maintain the same table in production using SM30 tcode. Please suggest me what would be the issue here?
Thanks,
Shreekant

Please delete the existing table maintenance view and regenerate the same.
1. SE11 > Table Name > MODIFY
2. Menu.. UTILITIES > Table Maintenance Generator
Keep a screen shot of this screen for future use.
3. Click on DELETE in Apps tool Bar
Then regenerate the Table Maintenance View, as usual.
Regard
Vishal

CL_GUI_CFW= FLUSH giving short dump

hi,
i have got two servers. one for development and other for quality. in development my CL_GUI_CFW=>FLUSH is working fine, but when i try to execute my prog in quality "flush method" is giving short dump, its returning sy-subrc <> 0.
can anybody suggest possible causes of the same.
The server status are all the same for quality as well as development.
thanks
pratyush

Hello Pratyush
You may want to have a look at my sample report ZUS_SDN_TWO_ALV_GRIDS_3 in thread
[how to refresh the contents of a grid?|how to refresh the contents of a grid?;.
Most control events do not trigger PAI of the dynpro. Thus, they behave similar like calling a search help or F1 help.
The automatic flushing which occurs at PBO is done the following way:
METHOD handle_user_command.
    * define local data
DATA:
ls_row TYPE lvc_s_row,
ls_knb1 TYPE knb1.
CHECK ( sender = go_grid1 ).
CHECK ( e_ucomm = 'SAVE' ).
CALL METHOD go_grid1->get_current_cell
IMPORTING
es_row_id = ls_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ls_row-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
PERFORM entry_show_details.
* Triggers PAI of the dynpro with the specified ok-code
" CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ). " not on 4.6c
CALL METHOD cl_gui_cfw=>set_new_ok_code
   EXPORTING
    ok_code = 'DETAIL'.
ENDMETHOD. "handle_user_command
Regards
Uwe

Short dump 'Table does not exist in database'

Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
    Table does not exist in database.
What happened?
    The table or view name used does not
    exist in the database.
    The error occurred in the current database connection "DEFAULT".
What can you do?
    Check the spelling of the table names in your report.
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
     caught in
   procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.

Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions.

Short dump in quality

Similar Messages

Maybe you are looking for