Show and debugs commands?

Hi does anybody know a list or page with debug and show commands to
troubleshoot the css. For examlpe for keepalive packets which returns to the css. Or to look how big is the sticky table an so on...
Best Regards
Andrea Benanti

There is not much debugging on the CSS.
What you can do is set the logging level to debug in order to activate debugigng.
ie: 'logging subsystem keepalive level debug'
You will start getting more info but you still won't see the packets.
You need a sniffer trace for that.
For the sticky table, you can see it by going into debug mode.
Type 'llama' and then do a 'sho sticky-table ....'
However, the table is hashed information is not possible to decode.
So, you won't be able to do much with it.
Gilles.

Similar Messages

Show and debug command to troubleshoot roaming

Hi experts,
I have complain that in some areas the voip phones sound choppy. I checked the signal strength in that area and it was actually too many APs with acceptable signal strength. I think it might be that the phone keeps roaming among the APs which caused the packets to drop. I am trying to prove it so they can get the phone vendor to change the roaming threshold. Is there debug and show command I can use to check for the roamin history of a client (with specific MAC address)? The debug client <MAC> doesn't show the roaming activity.
The controller is WISM2 running 7.2.110.0 code
Thanks,

If most of your APs are at 7 then I might agree, you have to many access points. But without seeing your design I dont want to comment.
Yes, -65 dBm. But it is very important dont use your laptop to see the signal strength. Rather use the badge itself and use it how the users are using it, around their neck. If they are holding it in their hand, thats a NO NO.
Remember each device hears differently. So if you used your laptop you might see a different dBm sginal than the badge consistently. Always use the device that is having issues.
The 3600 aps can transmist at the following 2.4 GHz levels ..
1 - 100mW <20 dBm>
2 - 50 mW <17 dBm>
3 - 25 mW <14 dBm>
4 - 12.5 mW <11 dBm>
5 - 6.25mW <8 dBm>
6 - 3.12 mW <5 dBm>
7 - 1.56 mW <2 dBm>
You can see if your APs are on 7 they are so low they must have a 10 feet foot print.
Do you have omnipeek or airmagnet to see channel utilization ?
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Show and

Hi,
we are facing some problem to hide and show command link inside the ADF table in conditional basis.
we have two attrinbutes in manged bean, based on one attribute value in managed bean i need show and hide command link for each row.
thanks

Set the render property of the link to an EL that is based on the value of the managed bean property.

Ipad stuck on logo and a command prompt shows up and then freeze.

my Ipad suddenly blackout, the screen is totally black but the backlight is still on, i can't seem to shut it down even I press the power buttons in a long period of time, then I waited more than a day until it runs out of battery to shut down itself. when I turn it on the apple logo show up the the backlight becomes dim and a command prompt shows up on the screen at left corner, then it restart and keep doing on and on until the apple logo only pops out the freeze and a couple of minutes later it backs-out and have to wait for it to runs out battery again. pls. help.

Your iPad probably might to be serviced or replaced. I don't think that there is much in the way of troubleshooting that you can do other than to restore to factory settings. You will end a computer running iTunes in order to restore to factory settings. If you can't attempt this for whatever reason, make an appointment at an Apple Store and ask for their help.
Use iTunes to restore your iOS device to factory settings

I will starting afresh website in my iWeb, it shows only the head or the command line and the command new website is inactive - what do I need to start over

Help........
I will starting afresh website in my iWeb, when I start the program it only shows the head or the command line and the command new website is inactive - what do I need to start over - what have I done wrong

Don't quite understand what you mean, but it says at the bottom that you are still using iWeb 08 so depending on what OSX you are running, you might consider upgrading to iWeb 09. This works with Lion, Mountain Lion and Mavericks.
Apple no longer sells iWeb so if you decide to upgrade, then you'll need to purchase iWeb by going to Amazon and buying the iLife 09 or 11 boxed sets, both of which contain iWeb 09.
Install this on your Mac and it might solve your problems, or just ditch iWeb and start again with one of the newer programmes out there that are still being supported and updated, such as RapidWeaver, Sandvox, Freeway Pro/Express, Flux 4, WebAcapella 4 and EverWeb (http://www.everwebapp.com).

I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....thank you

I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....not really sure what happened, but i didnt do anything different from my daily stuff
just an update....when i hit the right command key it respond normal (cmd v cmd c...etc) but when i hit the left command key it shows the x and two commands pressed as well as it delete what i'm working on i.e like backspace but takes out everything at once
thank you

Hi Moe,
Sounds mostly likje a bad KB, do you have another to test with?
Or...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Debugging inbound call - need debug command

I am debugging what I believe to be a dial plan issue on PGW but want to run a debug command on the ITP to show the actual called number of the inbound call.
What is the best debug command to use to see the inbound called and calling numbers of a call.

You are better off capturing an mdl trace from the PGW using per call tracing or using snoop and opening the call in Wireshark.
The ITP will only dump hex values and you will need to decode them yourself since it is not concerned with ISUP layer. You can use the cs7 paklog feature to attach an access list to a linkset and then send the raw data to a syslog server for decoding.
For example:
cs7 paklog x.x.x.x dest-port xxxx src-port yyyy
access-list 2700 instance x permit si all
debug cs7 mtp3 paklog 2700

Debug commands to troubleshoot client through the WiSM

We been having issues with several laptops that appear to be losing wireless connectivity and i wanted to know if there is a debug command or commands that would allow me to see the process of the client trying to Associate/Authenticate, etc..
Thank you
Vic

This may be a separate question, I am quite familiar with the "debug client" command, however everytime I log out, or am logged out of the console, and then log back in, my "show debug", shows that I am not debugging anything. The client mac is listed, but no Debug Flags are enabled. Is there no way to leave those debug commands on, so the output is put out to a syslog server? Thanks

Debug command adsl traffic

cisco 2651XM router
IOS: c2600-ipvoicek9-mz.124-15.T7.bin
wic1-adsl card fitted
which debug command will give me detailed info about traffic through the adsl connection? Specifically I want to see originating ip and destination ip of internet traffic (much like a wireshark readout)
I tried debug atm events and debug atm packet but these didn't contain the info I was after. Thanks for any pointers.

my router config doesn't specify anywhere which PPPo I'm using. All it says under Dialer0 is encapsulation ppp. I did the terminal from the console port using privlelged exec but it displays nothing when using 'debug ppp packet'.
ps: hold on, if I do
#show int dialer0
Dialer0 is up, line protocol is up (spoofing)
10345847 packets input, 229783612 bytes
7537931 packets output, 2120477085 bytes
Bound to:
Virtual-Access2 is up, line protocol is up
PPPoATM vaccess, cloned from Dialer0
does this mean I'm using PPPoA?

"command-z" and "option-command-z" does nothing in Final Cut Pro 5

My iMac is new and I have Final Cut Pro 5 installed. Cannot get "command-z" to undo anything in final cut and "option-command-z" will not open an audio file in wave format. Do these functions just not work in Final Cut?
iMac Mac OS X (10.4.7)

opt-cmd-z is "trim with edit selection audio"
After checking the keyboard settings in System Prefs on my MAC I don't see a universal UNDO command in there. It seems that cmd-z is just a common keyboard shortcut used in most apps. (Although Shake doesn't like it very much...) lilrad should check the Tools menu-Keyboard Layouts-Customize, and then click on the cmd and opt icons on the digital keyboard and see what icon it shows. If it is not set, there ya go. If you don't recognize the icon, try going to a command in the side button list (to the right of thte keyboard in this window) and click on a command that does not already have a shortcut. Type the cmd-z, or opt-cmd-z, (after unlocking the keyboard at the bottom left) and it will give you a warning as to what this keystroke is already set for.
There should not be any MAC override, but if there is that would be in the system settings window under keyboard and mouse, keyboard shortcuts. Scroll down and see if someone has set a master cmd-z shortcut. If so, get rid of it. It should be an undo command for all apps. (But that's just me, I could be wrong...)

Custom splash screen only shows up when command line is used...

Hi,
Everything in my Java web start application works perfectly but, the custom splash screen only shows up when command line is used ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"), if I use the shortcut on the desktop or in the start menu, the Java 7 splash screen shows up (tested under Windows Vista and Seven). Does someone have any clues?
Thanks...
My jnlp file :
<?xml version="1.0" encoding="UTF-8"?>
<jnlp spec="6.0+" href="AcSent.jnlp">
<information>
    <title>AcSent : Commande de repas</title>
    <description>AcSent - Commande de repas</description>
    <vendor>AcSent</vendor>
    <homepage href="http://www.xxx.eu" />
    <icon href="acSentIconBiseau.png" />
    <icon href="splashAcSentRC.png" kind="splash" />
    <shortcut online="true">
      <desktop />
      <menu submenu="AcSent" />
    </shortcut>
</information>
<security>
    <all-permissions />
</security>
<resources>
    <j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se" max-heap-size="128m" />
    <jar href="AcSentJnlpProgressIndicator.jar" download="progress" />
    <jar href="AcSentJnlp.jar" main="true" version="1.0" />
    <property name="jnlp.packEnabled" value="true" />
    <property name="jnlp.versionEnabled" value="true" />
</resources>
<application-desc name="AcSent" main-class="eu.acsent.jnlp.AcSentApplication"
     progress-class="eu.acsent.jnlp.progressindicator.CustomProgress">
</application-desc>
</jnlp>

Hi again,
I made some researches :
- The link in the generated shorcuts ("C:\Windows\SysWOW64\javaws.exe -localfile -J-Djnlp.application.href=http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp "C:\Users\Arnaud\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\46\69c1e9ee-1f252d1a") is not the same as the one I use in the command line ("C:\Program Files (x86)\Java\jre7\bin>javaws -verbose http://www.xxx.eu/AcSentVivresCrus/AcSentJnlp/AcSent.jnlp"). Is there a way in the the JNLP file to tell how to generate shortcuts (not the icon, etc., but command line options)?
- This sample (https://blogs.oracle.com/thejavatutorials/entry/changing_the_java_web_start) displays the splash screen when I click on the the generated shortcuts (I use Windows 7). I have copied the ButtonDemo jar file and the JNLP file on my IIS web server (Windows 2008 Server), this time the splash screen does not show up when I click the generated shortcuts but always shows up when I use the command line. Can someone tell me if it is a trouble with IIS ?
Thanks again...

IPhoto shows and imports triplicates (triple duplicates) of iPhone photos – On iPhone only single photos shown

I recently plugged in my iPhone, only to see that when the contents of the device were shown in iPhoto, there were triples, or "triplicates" of every photo (this put the total around 10,000 photos). Meanwhile, on my iPhone's Photos app, everything looks normal with only single photos being shown.
I toiled over how to remedy the problem, and found I had no other choice but to spend the MANY hours syncing thousand upon thousands of duplicate photos/videos to my iPhoto library. I then broke down and purchased Duplicate Annihilator to clean up my now ruined library. Because iPhoto made all those duplicates, the file size compounded into many gigabytes. Duplicate Annihiliator had to run for hours before finally cleaning things up. It did it's job well, however the root of the problem still remains.
At the conclusion of transferring my entire library of photos from iPhone to iPhoto, I had the photos removed from the iPhone so I could start with a clean slate. I took a few sample photos and plugged the iPhone back in to iPhoto. Yet again, the dreaded triple duplicates, or "triplicates" of each photo I took show in the device preview window (i.e. I took 5, non-HDR photos, and 15 are shown—each repeated three times). If I proceed to import the collection, it imports triple of everything into my library.
Essentially, my situation now is: I have to import multiple copies of everything (takes longer), then I have to run Duplicate Annihilator each time to keep my iPhoto library from being a mess. Just wastes tons of time. How can I keep iPhoto from showing and importing all these multiple copies every time? Again, on the iPhone end, everything looks normal—only a single copy of each photo.
What I have tried:
Closing/restarting iPhoto
Checking for iPhoto updates (there are none, I'm on the latest version—which, as of this writing, is 9.2.3 629.52)
Deleting com.apple.iPhoto.plist from ~/library/Preferences/
Using Image Capture (triple duplicates still show in IC as well)
Disabling Photo Stream
Removing all photos and albums from iPhone

I am seeing this problem still, even after trying the Photo stream toggle trick that was mentioned. I have one otehr observation to add.
If I "Command"+select the first of each photo in iPhoto and then import those (choosing to Delete after import), then the next refresh of iPhone pictures oniPhoto will show all the photos (including the duplicates) gone. So basically something like this.
1) iPhoto - I see triplicates of pictures on my iPhone.
2) Command+Select the first instance of each duplicated picture.
3) Import the selected pictures. Choose to Delete the pictures after import.
4) Go back to iPhone in iPhoto. No more duplicates of the pictures I imported.
So this doesn't fix the problem as all the unimported photos still show triplicates, but al least I don't have to run a de-duper on my laptop now to eliminate triplicates.
This eliminates some of the hassle, but it's still a hassle.
I hope someone figures this out completely because it's making me hate iPhoto just a little bit.
Song

Iframes show and hide

Hi All,
I have the Requirement like :
I have two iframes side by side in a page, and two buttons show and hide,
once i click hide button second iframe should disappear and first one should be increase in size to fit whole window. and once i click show first and second should be 50/50 in the page
for this i followed below steps
1) created page.
2) created two report region (No Template)
3) In one region source i called iframe like
TABLE>
<TR>
<td>
<IFRAME SRC="http://Localhost:7777/pls/apex/f?p=&APP_ID.:&P104_INTERFACE.:&SESSION." WIDTH=&P104_WIDTH. HEIGHT=540 scrolling="auto" frameborder="1"></IFRAME>
</td>
</tr>
</table>
4) in second region
TABLE>
<TR>
<td>
<IFRAME SRC="www.google.com ; HEIGHT=540 scrolling="auto" frameborder="1"></IFRAME>
</td>
</tr>
</table>
6)conditionally showing the region with the help of SHOW and HIDE BUTTON
7)and also on Show and hide button i am setting the value of P104_WIDTH . So the size will vary with conditional display?
NOW MY QUESTION IS:
once i click hide button THE CONTENTS(item VALUES) OF THE FIRST FRAME ARE REFRESHED, DUE THAT ALL ENTERED DATA WIL DISAPPEAR SO HOW TO AVOID IT , without refreshing the frist frame i need to set the P104_width value so it interm width will set in the iframe region??????
Thanks & Regards
Nagaraj B K

I had another idea that I am pursuing. I am looking into extending the current renderer CommandNavigationRenderer and will render another goLink just after the current goLink that will execute a close action. I was able to re-direct the rendering by added an override render-kit block in my current faces-config.xml file.
<render-kit>
<renderer>
<component-family>org.apache.myfaces.trinidad.Command</component-family>
<renderer-type>oracle.adf.rich.NavigationItem</renderer-type>
<renderer-class>com.riscs.ui.backing.jsp.components.ClosableCommandNavigationItemRenderer</renderer-class>
</renderer>
</render-kit>
If this works I am planning on extending the commandNavigationItem by creating a ClosableCommandNavigation tag and add a "closeAction" tag that will determine if a close item should render.
Preliminary work looks promising. I will update if I make progress...please let me know if I am crazy.
Thanks.

Bootvar and boot command

Hi all,
I have recently upgrade our Failover Active/Standby ASA software. Everything works flawlessly. Except I have the following question regarding the boot and bootvar command.
After the upgrade, both devices come with the new IOS image. However, when I issue show bootvar command, it displays the old image. I also in the running config, the command boot system dish0/.... still points to the old image. Yet show run config, and show ver display the new image.
Now, concerns... If the ASA reboots, would it come back with the new image, even though the boot system in the running config is pointed to the old config?
2. IS it better not taking the risk, and just update the running config with the new image?
Thanks,

1) If you reboot it as it is then the firewall will used the image set in the boot'system/bootvar variable.
Make sure you fix this before rebooting.
How to:
configure terminal
clear configure boot
boot system flash://new-image.bin
wr
Then
sh run boot
If it's showing the new image you are good to go.
Regards,
Jcarvaja

Gateway crashed after debug command - how to recover

Hi - I was troubleshooting an issue out of hours and the voice gateway I was working on crashed after using a debug command
Whats the best way to recover the gateway?
I'm unable to ping it now - do I need someone to reboot it?
Once it comes back up with debugging still be active ?

Chris if the debug you entered is too processor intensive then the only way to recover is to reboot. After Reboot the debugs are turned off.
Sometimes it becomes too slow but you are still able to access it intermittently if thats the case then you can wait for it become accessible for a small period of time and try to quikly enter u all (undebug all) otherwise if its completely inaccesible your only way to recover is to reboot.
-Terry

Show and debugs commands?

Similar Messages

Maybe you are looking for