Showing the UoM in COPA Reports

Hi experts,
Our clients sell many kinds of products, in which each of them can have a different UoM.
Example:
- Product A: 100 pc
- Product B: 10kg
That is why, we need to be able to show the UoM in the COPA Report.
Well, as far as i know, there is a fixed characteristic "Unit Sales Qty", but that is not what we want since it shows in the same way as the other characteristic in the drilldown report.
How can we set this UoM in the same column as the value field? (maybe beside it?)
Is this possible?
Thank you very much in advance
BR, Erwin Hartono

Hi Adi,
We have maintained that in KE4M.
In line item, it is shown though, but not in KE30...
The qty and the UoM is correctly transferred, however, my issue is that, they can't be shown in drilldown reporting side by side with the value field of sales qty. Normally, that UoM will be populated in the characteristics which is at the left side of the graphical output COPA report, which is not something we want, because it will need an extra effort from the user side to drilldown to that characteristics.
So, the main goal here is to be able to show the UoM side by side with the qty field in COPA graphical report.
Thank you very much for your help
BR, Erwin

Similar Messages

Re-show the FPGA Successful Compile Report dialog box

Hi, everyone,
Could anyone tell me how to re-show the FPGA Successful Compile Report dialog box?
I clicked the check box "do not show this massage in the future" on the dialog
It won't show up anymore
I need to know the accurate onboard clock rates on my FPGA.
so the "Target specific properties" can not satisfied me...
Is there anyone know how to solve this question? ~~Thank you

To reenable the compile report you must modify LabVIEW's INI file. Make sure the line nirviShowCompileReport=TRUE exists in the ini file. Let us know how that works out!
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

COPA report showing as positive values which should be show as Nagitive val

Dear Experts
I have one issue with COPA and Profit center reports reconciliation where the both have same structure
user compareing the (Period :dec 2011) report PCA and COPA there identified some values are difference so we started investgation
one of the cost element showing in nagitive value in accoungint document and same it is showing postive value in COPA report
that values for debit and credit line items are adding (,) insted of Cancellation (+,-) , so that COPA report is incresed the value for one value field when compare with PCA report line items
could you please let any guide me where is the problem is occuring
thanks
Rana

Hi,
   The COPA sign logic depends on the cost element type used (costs or revenues) and also the customizing of the '+/- transfer sign' in tcode KE4I.
The following table shows an overview of how condition values are
updated in CO-PA for billing documents from SD:
Billing document (normal) "With +/- sign"    "Without +/- sign"
Debit posting                          negative            positive
(such as sales deductions)
Credit posting                         positive            positive
(such as sales revenues)
Credit memo/return         "With +/- sign"    "Without +/- sign"
Debit posting                          negative            negative
(such as sales revenues)
Credit posting                         positive            negative
(such as sales deductions)
The "+/- sign" refers to the "Transfer +/- sign" flag in tcode KE4I where you assign SD conditions to COPA value fields.
If the system is behaving as shown above and you want a different behavior then you could change the sign in user exit COPA0002.
regards
Waman

What is the functionality to create report tree for copa reports

Dear Fellow members,
Good day to you!
I would need your advise on how to create report tree for the list of COPA reports created by users in Production. Note that currently power user is using KE30 to create these reports. Due to its sensitivity, I need to prevent users from knowing the list of reports created. Basically just wanted to allow user to execute the few copa reports revelent to his area like Channel P&L.
Many thanks in advance & cheers.. !
from Elaine

Dear Mohammed azam
Thanks for your reply.
Before i can create the menu tree, i need to create the same report name and form name in DEV client, create the report tree with this report name. The report name & form name not necessary have to be t same format at the one in production client. meaning, you can create just a row and a column. That's it you can perform the normal landscape of transporting the report tree to QAS & PRD.
Thanks & cheers !
elaine

Do not show the # values should be replaced with blank at report

Dear All,
There is a requirement do not show the null (#) values at report level for characterstics fro example for onedocument there is no notification type in report for that document it is coming with null value but i do not want that null value in report it should be blank
any suggestions please,mostly provide the information at report level,but at cube level any options at the time loading( through start routine)
Thanks & Regards
sathish

Hi Satish,
There is one tcode where u can keep ur symbol defined say blank to show in report when null values occur... i didnt rememeber tcode i will tell you as soon i get it....
but it will effect not only this query but all the queries so it is upto u....
and at cube level u can write a routine to check ...
if this field value is initial .
change it with blank
else
leave it.
hope it helps...
regards
vamsi
Edited by: vamsi talluri on Mar 15, 2009 10:33 PM

COPA reports - Quantity in alternative Unit of Measure

Hi all
My clients requirement is to dispaly quantities in both base UoM and alternative UoM in COPA reports. Alternative unit of measure and the conversion factor is maintained in the additional data of material master. After reading through several forums and documentation, i understand that this can be achieved using COPA enhancement COPA0005.
I am thinking of creating new value field to store the quantity in alternative UoM and to calculate the required quantity using the conversion factors in MARM table.
But I have a few questions regading the same.
1. There are 2 function modules EXIT_SAPLKEII_001 and EXIT_SAPLKEII_002. Which one should i be using for my purpose?
2. Should enchanement COPA0003 be actived first to make COPA0005 active?
3. Is any other configuration required apart from created in new value field for quantity in alternative UoM.
Thanks
Vamsi
Edited by: VamsiM on Mar 17, 2011 7:21 PM

Thanks Ajay for ur reply.
When I created the quantity value field (say VVXXX), added it to Op. Concern and regenerated the structure; the system itself created the quantity unit field VVXXX_ME for alt UoM. This field is also added to field catalougue and is also readily avialable for used in KE30. So I didn't have to create a new Characteristic.
In my case, the alternative UoM is not the same and depends on the material.

Cost component structure in copa report

HI Gurus
1We are doing REM Process and costing variant "PREM"
2. We are going for moving average price for all Material type there is no standard cost estimate
3. My client want to see the cost component structure in copa reports like
sales
exice
ram material
packing material
labour
overehad
selling and distributioh overhead
I have done all necessary setting in costing key
I have done pa trasnfer structre also
But Cost component spill is not happening in copa report
Can we get cost component struture in copa report with moving average price if yes
Please advice me how to geneate the report
Thanks & Regards
KISHORE

Hi Aravind
Thanks for your reply, But in our business process there is not Standard cost estimation,bcoz, Price control in material master is MAP. Can we get cost component strudcture in copa if we are going for MAP in MM.
I have done all the Setting IN KE4R also. But i am unable to see the values in COPA report
Thanks
KISHORE

COPA Report

Hello ,
The data for one G/L account (i.e X) is not getting updated in COPA report. We just realised that the G/L account X is not been created as cost element. Thus we created now it as cost element with category as 12.
But the output of COPA report for the past datas are not getting reflected by that G/L X amount.
Kindly let me know is there any way where in we can update those datas in COPA now.
Thanks and Regards,
Deepa

Hello Abhishek,
My source data is Billing document.
One value for GL account X was not flown to COPA report .
So I was trying to use the T.code KE4S ( input parameters -update control -selected first option i.e check for existing records)
But in the standard report , the G/l value was not getting captured in any COPA.
Kinldy guide me in this .
Regards,
Deepa

COPA Report- Cost Elements

Hi All,
We have done the required configuration for COPA. We have created a COPA (Costing Based) report as well. The client wants this COPA report to be run for the first quarter of 2008 i.e. April 2008 to June 2008.
However, discount values for the said period are not flowing to this report.
Verification reveals that, no cost element is created for "Discount Given" GL Account. Hence, only revenues, from billing document, are being posted to CO area. The same values are updated in COPA also.
As per my knowledge, unless Cost Elements are created values won't flow to CO and COPA.
Can anybody help me to overcome the problem. . . ?? i.e. How to get the values in COPA report for the said period . . .
Thanks in advance . . .
Regards,
Ravi Kumar

Hi
Your understanding is perfect we need a cost element for transfering the data to CO and COPA.For flow of values to COPA from SD we need to make the following config.
Create the GL account with cost element category 11 or12
Map the discount condition type to COPA value field.
Also it is very diffucult to identify the discount region wise customer wise etc.Since it is posted to one GL account.
To overcome come this issue I guess the only option is to cancel the billing documents,maintain the config and the again create the billing documents.As you said the volume of transactions are high you can consider using LSMW for cancelling and recreating the billing documents.
Regards
Sandy.

Number of sales orders in a copa report

Hi All
I am designing a revenue report from COPA.In the report,By changing the chrecteristics(sales org), the revenue in the report changes and underneath the revenue the number of sales orders will change. Now my question is, Is there any way to display number of orders that make up the $ amount in Copa report?

Hi Williams,
In order to regenerate this program call function module 'RKE_GENERATE_INTERFACE_ACT' in the test environment and start it for the respective operating concern.
Example: if the name of the operating concern is 'S001', program 'RK2SS001' has to be regenerated.
Proceed as follows to generate program 'RK2SS001':
Call Transaction SE37 (Function Builder).
Enter function module: 'RKE_GENERATE_INTERFACE_ACT'.
Choose 'Single test' (F8).
Enter import parameter ERKRS = 'S001'.
Choose 'Execute' (F8).
You would drive the steps for the generation of the program 'RK2SXXXX' for ALLE your operating concerns through.
By the program changes described in this note it is avoided to call the CO-PA cross-company-code derivation type in the so-called 'overwrite mode'. Usually characteristic values of the derivation type which are already filled, that means directly copied from the sales order, are not overwritten anymore.
If characteristic values during the processing of cross-company-code orders are supposed to be copied from the profitability segment of the supplying company code into the CO-PA line item of transaction type 'A', the possibility is provided with the attached correction. Technically the implementation of the desired transfer logic is not executed within the framework of a standard SAP enhancement, but rather by means of the help of a CO-PA-specific user exit of category 'RKE_EXIT'.
In order to use the 'RKE_EXIT', proceed as follows:
1. Call Transaction 'SE16' and create an entry in table 'TKEEXITS' with following field contents:
                    EXITID - 'KEI1_INTERC'
                    APPL - 'KE'
                    SEQNO - '001'
                    ISACTIVE - 'X'
                    REPORT - Name of a program in the customer namespace 'Z*'
                    MODEL - Name of a FORM routine in program REPORT.
2. Then you can implement the 'RKE_EXIT' in FORM routine 'FORM' of program 'REPORT'. If you want to deactivate it, you have to set the flag 'ISACTIVE' to initial or remove the entry from table TKEEXITS.
3. FORM routine 'FORM' must be declared with following chaning parameters:
                    I_EXIT_ACTIVE TYPE C
                    I_ERKRS LIKE TKEBB-ERKRS
                    IS_CE1 TYPE ANY
                    IS_CE1_INTERC TYPE ANY
4. To activate the 'RKE_EXIT' in the program, first set flag 'I_EXIT_ACTIVE' to 'X', since otherwise you can not branch to the exit within the same transaction during the next access.
5. In the parameter 'I_ERKRS' the operating concern 'XXXX' of the selling company code is passed. The parameter 'IS_CE1' contains that one current line items for the record type 'A'. The parameter 'IS_CE1' contains the current line item for the transaction type 'A'. The characteristic values of the profitability segment stored in the sales order from the supplying view are passed in parameter 'IS_CE1_INTERC'. Are the selling and assigned the supplying company code different operating concerns, values of characteristics only are available in the parameter 'IS_CE1_INTERC', that exist in both operating concerns with the same technical indicator.
6. The parameters 'IS_CE1' and 'IS_CE1_INTERC' are passed in non-record structured form and must be assigned in the FORM routine to corresponding program variables which both of the type 'CE1XXXX' with which 'XXXX' designates the operating concern of the selling company code are. On these program variables the characteristic value transformations can be executed. Finally the program variable 'IS_CE1' must be assigned to the parameter again, so that the changed characteristic values are returned correctly.
The source code of the 'RKE_EXIT', if the implementation is done in program 'ZZCOPA_CHANGES_INTERCOMPANY', FORM routine 'CHANGES_INTERCOMPANY' and operating concern 'S001' and from the profitability segment of the returning view characteristic 'WWXYZ' is supposed to be copied
Regards,
Srinivas Muthyala

For getting doc print out systemn show the error

Hi
can any body help on this
for taken document printout system shows the following error
"Print report RFKORD50 in company code GB01 has not selected any data for ZRE01
Message no. FB475
Is there update any varient ...?
regards
satyanaranara

HEllo,
To resolve this you should associate a form to the print program,
you should call transaction OB78 and mantain correspondence ZRE01 for
your company code.
Can you plwease check it?
REgards,
Renan Correa

Material regrouping in MM02 not reflecting in COPA report

Hi,
In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
I am designing report for three companies by using material group 1,2,3,4 and 5.
We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
Please suggest on how should we rectify our material grouping to reflect in COPA report.
Regds

Hi,
in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND.

Headings for COPA reporting

Hi Guys,
How do we define the headings for COPA reporting. I need to develop the contribution margin report. Can any one please guide for defining this heading. While defining do we need to club any items.
Thanks and Regards,
Ram

Hi
While you define COPA report in KE31, go to Output Type atb and define the Header/Footer... You can maintain the headings there
br, Ajay M

COPA Report ( How to explode in the report )

Hi ,
I just created COPA painter report for the sales commission.When i drill down the Report it will show the commission posted for each sales district 1 , when i drill the sales district it will show all the profit center 1 updated for the sale district 1 commission, when you drill the profit center it will show the cost centers posted for the profit center 1 commission.
But here what i need is when i drill the profit center, report must show all the cost centers ( just like when we create a variable for cost centers and explode in the report painter report for cost centers).
as we use Characteristics i am not able to explode all the cost centers.
Thanks in adavance

Hi Saritha,
Its not technically possible to remove '#' from output when there is no value for that InfoObject unless you exclude it from result set. Other option is to have some character, in our scenario the way we did is, we always put dot ' . ' instead of blank while loading the data into data target which can be done using Transformations / update rules / Transfer rules.
Anyway you can suppress it....Try this,
Step 1: Select the Characteristic which u want to hide (#) in the Bex report.
Step 2: Right click --- restrict --> you will get a popup screen with some values and Select # from the left side of the screen and drop it to the right side.
Step 3: Right click on the # you will get an option "exclude from selection". Select it and activate.
Hope it Helps,
Thanks,
Amit kr.

How to increase the charecteristic description length Copa report

Hi All
I built a copa report with material and customer as characteristics for a drill down report. Unfortunately, the total description of the material is not showing up in the report. Is there any way that we can increase the description field length, so that the users can see the whole description of the material.
Thanks in advance

Hi,
You can make a Z copy of the report you are asking for.
In this Z copy, you can ask your ABAPer to increase the length of the Material Decsription Field,i.e., to change only one field and keep the rest as it is.
Hope this is helpful.

Showing the UoM in COPA Reports

Similar Messages

Maybe you are looking for