Showing the Values as 0 in Sales Queries
Hi,
I configured Sales in my BI server with the help of SAP Best Practices.
In the initial steps while activating the Data Sources it has give me a warning message " R8281".
I neglected that warning and i completed the configuration.Now am trying to execute Incoming Order Query but it is showing the Values as 0 for all the Key Figures and Characteristics.
Not only for 1 query for all the querire it is showing the Values as 0.
Please guide me with a solution.
With Regards,
Praveen
Hi Savitha,
As it is a Preconfigured Solution given in SAP Best Practices,
These are the Steps i followed
1) Transferring Business Content DataSources
2) Logistics Extract Structures Customizing Cockpit
3) Deleting the Contents of the Setup Table
4) Performing Setup - SD Sales Orders
5) Performing Setup - LE Deliveries
6) Performing Setup - SD Billing Documents
7) Replicating DataSources from the SAP ERP System
8) Assigning Source System for Activation
9) Activating Business Content: InfoObject Catalogs
10) Loading Master Data Attributes/ Texts/Hierarchies
11) Activating Business Content: InfoCubes and
MultiProvider
12) Activating Business Content: Queries
13) Activating Business Content: Query Views
14) Maintaining DataStore Objects
15) Loading Transaction Data
So i created InfoPackages and i did all these steps.
But as per our discussion when i right click and select manage on Sales Overview Info Cube in RECONSTRUCTIONS tab i found most of the InfoPackages Load Status as Red.
I hope you two will guide me to get a solution.
Thanks and Regards,
Praveen
Similar Messages
-
Creation of a Query to show the values for the current month and the last 12 months data.
Dear All,
Good day!
I have to create a Query with the below requirement.
I have to create a Query to show the values for the current month and the last 12 months data.
Can you please guide me how to achieve this ??
thank you,
Regards,
HemaHema
explain the exact problem..? as you mentioned you want to create query to show values for current month and last 12 months.. so I think you want to show values for 12 months from current data.. you can achive this by multiple way..
you can have selection screen and field with date .. and restrict based on system current date and 12 months before or you can handle this at your target.. .. I mean there are multiple ways to restrict data by date range..
for some more hints..
http://www.forumtopics.com/busobj/viewtopic.php?t=34393&sid=7fba465d0463bf7ff5ec46c128754ed6
http://businessintelligence.ittoolbox.com/groups/technical-functional/cognos8-l/how-to-display-last-12-months-in-report-based-on-todays-date-3231850
http://scn.sap.com/thread/3217381
search on SDN you will get many other ways..
Thanks,
Bhupesh -
Issue : In sharepoint 2013, I am experiening below error while using filter in the list view due to the number of items in this list exceeds the list view threshold, which is 10000 items. Tasks that cause excessive server load (such as those
involving all list items) are currently prohibited.
Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator
Could you please suggest a way to avoid this issue apart from incrementing the list view threshold limit .
PrashanthReorganizing content, or creating more specific views. sharepoint is warning you that the content is structured in such a way that it can cause performance issues, which should be addressed in some way.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
ME23n , Does not shows the values correctly in print preview
Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandibIt turns out that this problem went away after the program crashed. Everything seems to be working well now.
-
AFAR test run showing the values but not posting in Real run.
Hi Friends,
i have an issue with AFAR recalculating the depreclation. The details are as below;
1. Asset value date is 15.07.2010. but ordinary dep. start date was set as 01.01.2010 manually by the user.
2. The Period control method 11, the dep. is calculated for entire year for acquisition.
3. we have already calculated depreciation from period 12 2010 to period 04, 2011.
4. Now, we have changed ordinary depreciation start date for 5 asset records from 01.01.2010 to 15.07.2010.
5. Therefore, we recalculated AFAR for these assets for 2010 and test run is showing the values for these 5 asset. The same was expected by the business.
6. When we execute the real run, it is not posting and no change in asset explorer for period 12, 2010 or in current period. No error message is available in spool / job log.
We have opened FI periods as well.
My question is that why the system calculating the values in test run and if it is calculated in test run, why it is not posting in update run?
As per the period control method, the depreciation should not recalculated for half year even we change the ordinary dep,start date from 1st Jan to 15th July.
I request you to clarify my doubt and help me to understand the error which is stoping the values in update run of AFAR.
Best Regards,
PadmajaHi,
Sorry...it is not worked out. Alternatively, i tried the shift factor with variable depreciation and i achieved the values which appeared in AFAR test run.
Thanks for the help.
Regards,
Padmaja
Edited by: PadmajaCH on May 19, 2011 3:26 PM -
Hi all,
query has to show the values of keyfigures with above 200(201,202.....) as 200.
for example
james 200
willy 180
Jhones 450
kiris 204 and so on.
the values above 200 that is 450 204 has 200 in the query output.
Thanks,
JamesHi ganesh,
Thanks for response.
but assumption is wrong.
the values below 200 also needed and the values above 200(400,204) has to show 200 in the output of the report.
format before the output of the query.
james 400
kitty 200
jhones 180
francy 204.
Now my output has to show
james 200
kitty 200
jhones 180
francy 200.
I hope you can understand better now.
Thanks,
James -
Trace logs don't show the value of a procedure parameter.
Hi;
I am Facing a deadlock situation daily.
I checked the alert.log and it look like this:
ORA-00060: Deadlock detected. More info in file /oracle/admin/TEXP/udump/texp_ora_28966970.trc.Then i read the trace log, but it doesn´t show the value of procedure parameters.
insert into estq_300 (data_movimento, codigo_transacao, nivel_estrutura, grupo_estrutura, subgrupo_estrutura,
item_estrutura, quantidade, valor_movimento_unitario, valor_contabil_unitario, codigo_deposito, numero_lote,
centro_custo, usuario_systextil, processo_systextil, tabela_origem, entrada_saida, numero_documento) VALUES
(:v1, :v2, :v3, :v4, :v5, :v6, 1.00, :v7, :v8, :v9, 0, 0, :v10, :v11, 'ESTQ_300', 'E', :v12)
End of information on OTHER waiting sessions.
Current SQL statement for this session:
UPDATE TB_Y SET QTDE_ESTOQUE_ATU = QTDE_ESTOQUE_ATU + :B11 , QTDE_ESTOQUE_MES =
QTDE_ESTOQUE_MES + :B10 , DATA_ULT_ENTRADA = :B9 , DATA_ULT_SAIDA = :B8 , QTDE_ESTOQUE_F =
QTDE_ESTOQUE_F + :B7 WHERE CDITEM_NIVEL99 = :B6 AND CDITEM_GRUPO = :B5 AND CDITEM_SUBGRUPO =
:B4 AND CDITEM_ITEM = :B3 AND LOTE_ACOMP = :B2 AND DEPOSITO = :B1I sent the trace logs to the software supplier, but they want the parameter values.
I'm reading the documentation and searching on the forum, but until now i can't find anything to help me. Is there any way to see the parameter value?
This is a large database with a lot of users, so I can't trace all of them and wait the deadlock occurs.
DATABASE:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
OS:
AIX Version 6.1! Regards,sb92075,
thanks for reply,
This VW's helped a lot, but i have one doubt:
Why some SQLs don´t show the value of it´s binds?
The last captured is null too, why?
Example:
SELECT name, position, last_captured, value_string FROM v$sql_bind_capture WHERE sql_id LIKE '%ahfqand46px43%';
NAME POSITION LAST_CAPTURED VALUE_STRING
:V1 1
:V2 2
:V3 3
:V4 4
:V5 5
:V6 6Thank's -
Query is not showing the values - authentication error
Hi,
After running a query it is not showing the values and showing <b>"You do not have the authorization for the selected component."</b>
Diagnosis
You do not have the authorization for the selected component.
System response
The selected component cannot be edited.
Procedure
lease speak to the person responsible for authorization, if you require authorization for the editing of this component. The function is protected by the object "Business Explorer - components" with the following fields:
InfoCube ZPLAYOPPT
Type of a component REP
Component PLAYBOOK_OPPT_1
Activity 16
Notification Number BRAIN 800
<b>Can u pls tell me the solution.</b>Thanks and Regards,
Giri.Go to SU01, look at your authorization profile for which roles you are given. Then, go to PFCG and check out the roles and how they are defined. It is possible that you are not authorized to view application area, infocube, certain characteritics etc.
Hope this helps,
Regards,
Petter -
Drop Down shows the values twice
Hi,
In MPP, there is a drop dop which displays all the Infotypes along with the description.
Populated all the Infotype using the FM F4IF_INT_TABLE_VALUE_REQUEST in Process on Value-request.
But the drop down shows the values twice as,
PA000 : Organisation Assignment PA000 : Organisation Assignment
PA001: Actions PA0001: Actions
In debugging,i have checked the internal table which i pass to the FM, it has only one time.
Could be help me to resolve this.?Ensure your code follows below logic
PARAMETERS: pa_it TYPE t582s-infty AS LISTBOX VISIBLE LENGTH 40 MODIF ID 2md.
TYPES: BEGIN OF t_infty,
infty TYPE t582s-infty,
itext TYPE char40,
END OF t_infty.
DATA: it_infty TYPE STANDARD TABLE OF t_infty WITH HEADER LINE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_it.
REFRESH it_infty.
SELECT * FROM t582s WHERE sprsl = sy-langu.
MOVE-CORRESPONDING t582s TO it_infty.
it_infty-itext = t582s-itext.
CONCATENATE it_infty-infty t582s-itext INTO it_infty-itext SEPARATED BY ' - '.
APPEND it_infty.
ENDSELECT.
PERFORM dropdown_list_values_create TABLES it_infty USING 'INFTY'.
FORM dropdown_list_values_create TABLES f_tab
USING retfield TYPE dfies-fieldname.
"display internal table as a dropdown list,
"return field 'INFTY' when the event is trigerred
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = retfield
value_org = 'S'
TABLES
value_tab = f_tab
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. "dropdown_list_values_create
Regards
Marcin -
Do not show the # values should be replaced with blank at report
Dear All,
There is a requirement do not show the null (#) values at report level for characterstics fro example for onedocument there is no notification type in report for that document it is coming with null value but i do not want that null value in report it should be blank
any suggestions please,mostly provide the information at report level,but at cube level any options at the time loading( through start routine)
Thanks & Regards
sathishHi Satish,
There is one tcode where u can keep ur symbol defined say blank to show in report when null values occur... i didnt rememeber tcode i will tell you as soon i get it....
but it will effect not only this query but all the queries so it is upto u....
and at cube level u can write a routine to check ...
if this field value is initial .
change it with blank
else
leave it.
hope it helps...
regards
vamsi
Edited by: vamsi talluri on Mar 15, 2009 10:33 PM -
F4 Process takes a long time to show the values
Hi gurus,
We are facing an issue with the InfoObject Sup. Company Code 0COMP_CODE, this characteristic has 200 enties in the Master Data, and 10000 values in the SID table.
This infoObject is being used in a Query (3.X version) and when we press the F4 to obtain the values, it takes a long time to show them.
The query takes data from a Multiprovider, and the multiprovider only has one Cube.
The issue is happening with a lot of query (obviosly, with the same object), and there is no reason to do it I think, because the amount of records is not too much (10 K rec).
So, what do you think is happening? all your help will be helpfull.
Regards, FedericoFrederico / Rob,
setting the InfoObject property of 'Query execution filter value selection' to 'values in master data table' has the consequence that it is indeed faster on the query selection screen, but then when selecting filter values after the report has been displayed is not restricted to the values in the report results - again all master data values are shown for selection. This is not acceptable to our users.
Ideally, I would like to see two settings for query execution - master data for the initial selection screen, only posted values for navigation after the query has been executed. But I doubt that's going to happen.
In BW3.5 I seem to remember that you can set the choice of F4 display within the web template (can't in BI7).
NB for BI7 Java execution, examine the 'order for F4 help' on the InfoObject attributes and remove most of SAP's default settings. This will speed things up a little.
David -
Cash positions shows the values of the liquidity forecast a few days later?
Regarding transaction FF7A/B:
The Liquidity forecast shows the future receivable and payable based on the payment terms (due date) of the AR and AP invoices on a certain day. The amount should added to (in case of receivables) or subtracted from the bank account the next day or 2 days (bank statement processing) for the majority of payments (incoming and outgoing). Please confirm?! I should see the values of the Liquidity Forecast back in the Cash Position with a delay of a few days. Please confirm?!sorry, was in a rush, any suggestions to fix or ideas of what has gone wrong
-
How to show the VALUE as the Column Header using SQL query?
Hi
I have a requirement to show the picked value as the column header using SQL query.
Example:
======
SELECT EMPNO FROM EMP
WHERE EMPNO=7934;
Result Should be:
7934
7934I have a requirement to show the picked value as the column header using SQL query.In sql*plus you can do
SQL> set verify on
SQL> def e = 7934
old: SELECT empno "&&e" FROM emp WHERE empno = &&e
new: SELECT empno "7934" FROM emp WHERE empno = 7934
SQL> SELECT empno "7934" FROM emp WHERE empno = 7934
7934
7934
1 row selected. -
Format a number with a decimal to show the value but not the decimal point
I have a value of 129.50 in the DB. I'm using the htp.prn() function to export this value to a txt file. I have the field padded with leading 0s (so it looks like 0000129.50)
I need to keep the value for the .50 but don't want the decimal point to show up (so I need it to look like 000012950) but can't figure out how to make it keep the value for the .50 but not actually show the decimal point - any ideas? (APEX 4.0 11g)Multiply by 100 and remove the formatting. htp.prn (to_char (number_item, '99999999999'));
Edited by: Kleber M on Sep 14, 2011 5:10 AM -
Value help on a published CR do not show the value help as an hierarchy.
Hello experts,
we published a CR based on a Bex Query to the BW role and to BOE. The parameters on CR are based on Bex Hierchy variables. If we logon with an SAP User (with SAP_ALL) on Info View/ BI Launch Pad to execute the CR the value help shows the hierarchy correctly.
+ world
+ North Amerika
+ Western Europe
+ Asia
If we logon on to Info View / BI launch Pad with a normal SAP Enduser (without SAP_ALL) but with all needed End User Roles the value help shows a flat List....
World
North Amerika
Western Europe
Asia
We try to trace this authorization issue but we do not got any clearly results.
Maybe someone knows the needed authorization Object on BW....?
Regards MichaelHi,
the authorizations are documented in the installation guide for the SAP Integration Kit and the authorization trace should show it as well
ingo
Maybe you are looking for
-
APP- Single Payment Document per Profit Center
Hi All, Like we have option making single payment per business area wise in APP, client request to make per profit center Wise. But, sap not given any option like that till ECC 6.0 EH4. Can anybody have any work round solution for this requirement. T
-
How to save a scan in Image Capture?
How do I save my scan in image capture? What option to I go to save it as a JPEG or PNG to my computer?
-
No print from Windows 7 or 8.1 Desktop and Officejet Pro 476dw MFP
This printer is just over one year old!! I cannot get a printout from the printer whether using my Windows 7 laptop or my Windows 8.1 desktop, Both are connected wirelessly to the printer. The status says it is printing when the job is sent, but no p
-
Page consistency without templates?
I am on Macintosh using Dreamweaver 8. When I was on MX2004, I used templates and never had a problem. Then, with the 8 upgrade they changed some weird thing with the templates which screwed up all my links on pages I'd already built. So I don't want
-
ZFOLD/TRIFOLD Attribute In PCL Print Job
I am looking for a way to set the "@PJL COMMENT EFIPJL SET ZFOLD" parameter in a print job generated by Java's Print API, in order to tri-fold the paper in a Minolta printer. I am using the PrintRequestAttributeSet to set Sides.DUPLEX and have checke