Showing values beside html5 slider

I have a page layout that I rather not break, and on the particular page (http://www.evolvedtools.com/hardwareTools.html) I have a range slider that I have been playing with.
I have been looking at some examples where people have been able to constantly display the value of the slider, alongside the handle , as it is being moved. The values are not what's important for now, but rather the implementation in my existing code. I am not willing to restructure my whole page to fit it in.
In the code for my page I have commented out the code for a "bubble" solution I picked up on the net. It produces a little container that is supposed to follow the range slider and display a value for it. It doesn't work for me though, and I am not all that surprised, as I guess the implementation is a little bit more difficult in my case than the example..... ( Example: http://css-tricks.com/value-bubbles-for-range-inputs/) I see that it makes use of webkit elements also, which I don't like...
So my question is: Where would I have to go from here to implement such a feature ?
page HTML:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Hardware Tools</title>
<link href="evolvedMobile.css" rel="stylesheet" type="text/css" media="only screen and (min-width: 0px) and (max-width: 650px)" id="stylesheet-650" />
<link href="evolvedTablet.css" rel="stylesheet" type="text/css" media="only screen and (min-width: 651px) and (max-width: 1000px)" id="stylesheet-800" />
<link href="oneColLiqCtr.css" rel="stylesheet" type="text/css" media="only screen and (min-width: 1001px)" id="stylesheet-1920" />
<script src="http://cdn.jquerytools.org/1.2.7/full/jquery.tools.min.js"></script>
<Script type="text/javascript" src="respond.min.js"></Script>
<script src="SpryAssets/SpryEffects.js" type="text/javascript"></script>
<Script type="text/javascript" src="Javascript Cookie Script.js"></Script>
<script type="text/javascript">
function MM_preloadImages() { //v3.0
var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
    if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
function MM_findObj(n, d) { //v4.01
var p,i,x; if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
    d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
if(!x && d.getElementById) x=d.getElementById(n); return x;
function MM_swapImage() { //v3.0
var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
   if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
function MM_effectAppearFade(targetElement, duration, from, to, toggle)
    Spry.Effect.DoFade(targetElement, {duration: duration, from: from, to: to, toggle: toggle});
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
function MM_swapImgRestore() { //v3.0
var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
</script>
<style type="text/css">
body,td,th {
    font-size: 0.70em;
    font-family: "Arial Black", Gadget, sans-serif;
</style>
</head>
<body bgcolor="#000000" onload="MM_preloadImages('images/HomeMainBlank2_03.png','images/HomeButton_03.png','images/ToolingButtonBlank2_07.png','images/BlogBlankM_07.png','images/Script_07.png','images/PluginTheory_05.png','images/flashBack_12.png','images/umlPage_12.png')">
<div class="TabWrapContent" id="wrapperExt">
<div id="homebutton"><a href="index.html" onmouseover="MM_swapImage('homebutton','','images/HomeButton_03.png',1)"onMouseOut="Set_Cookie('homeHardware','TRUE','','','','')"><img src="images/HomeMainBlank2_03.png" alt="HomeMain" name="homebutton" width="138" height="55" border="0" class="AllElements" id="homebutton2" /></a></div>
<div id="PluginM"><a href="PluginT.html" onmouseover="MM_swapImage('PluginM','','images/PluginTheory_05.png',1)"onMouseOut="Set_Cookie('PluginFromHardware','TRUE','','','','')"><img src="images/ToolingButtonBlank2_07.png" name="PluginM" width="142" height="55" border="0" class="AllElements" id="PluginM2" /></a></div>
<div id="Scripting"><a href="ScriptsT.html" onmouseover="MM_swapImage('Scripting','','images/Script_07.png',1)"onMouseOut="Set_Cookie('ScriptingFromHardware','TRUE','','','','')"><img src="images/BlogBlankM_07.png" name="Scripting" width="135" height="55" border="0" class="AllElements" id="Scripting2" /></a></div>
<div id="umlTools"><a href="UmlTools.html" onmouseover="MM_swapImage('umlTools','','images/umlPage_12.png',1)"onMouseOut="Set_Cookie('umlToolsFromHardware','TRUE','','','','')"><img src="images/flashBack_12.png" name="umlTools" width="125" height="55" border="0" class="AllElements" id="umlTools2" /></a></div>
</div>
</div>
<div id="contentWrap">
<div id="wrapperExt2">
<p> </p>
<p><span style="font-size:1em;">Hardware Tools</span> is a term I hope will seem pretty self explanatory. This page is meant for descriptions of useful hardware electronic and ergonomical tools. To get a decent workflow going it is increasingly important to multitask, even when doing art or design - work. People have preferences according to their profession or field of interest, but the designer aspect is emphasized here. Also note that I am here referring to more or less mobile solutions for the individual designer.<br />
<br />
Firstly, for me I have slowly come to the conclusion that your workstation(read laptop/pc) and its specs are not going to be the piece of equipment that is most importent to you. With a decent processor, graphics card and installed memory you really can squeeze A LOT out of your mid -range machine. I will take examples from my own setup here to show you what I mean, and the interconnectivity you can acchieve through peripherals. I am talking everything from tuning software, through harware add - on's, to monitors, tablets, cell phones, networks, graphical equipment, etc..<br />
<br />Both at home, at work and on- the- go there is increasing need for efficiency and productivity. But the large workstations are on their way out. Ordinary desktops, desktop monitors and the like have seen their glory days, and efficient computer development reduces the need for large hardware solutions. Computing is being distributed across several pieces of equipment, as opposed to being centered in a core. Mechanically, this can be seen in solutions like the ones where your average laptop has its capacity expanded by establishing an externally housed pci-express card through the laptop's expresscard slot. Storage solutions working on cloud platforms make the need for tactile storage components redundant. This eliminates a lot of permanent hardware- needs for the traveler. And then you have visual aspect with screen real estate being a keyword. As an example here I would like to refer to a brand by the name of <a href="#" onclick="MM_openBrWindow('http://www.displaylink.com','','scrollbars=yes,resizable=yes,width=625,height=625')">DisplayLink</a>. This is a company that develops solutions for USB - connected Display solutions, like portable monitors. They make use of their own graphic adapters in the hardware, so you are not limited to the ordinary 1 extra display per standard workstation. With USB 3.0 making its presence felt, the bandwith will allow these solutions to get even better. This is of course due to the higher bandwidth that the new USB provides. On a regular pc you can connect up to 6 USB displays, and 4 for the Mac. On Windows multipoint server up to 14 displays are supported. This is of course without counting the extra displays supported by your graphics card/s. The ingenious thing about these products is the way they relieve the stress on your main hardware in that they distribute the graphics computing to several instances. This means you do not have to have a powerhouse pc to be productive on more than two displays. The graphics adapters rely on your internal cpu, but do not need much else. Hook up to any HDMI or DVI monitor or projector anywhere instead of dragging things around with you. I strongly suggest checking out their page and their products(DisplayLink), and see which products they have avaiable for your region. <br />I am currently using several DL-3500 chip graphics adapters for 1920x1200 monitors connected to my laptop. They are small and handy and I can take them with me and hook them up anywhere for more screen real estate. The difference between the fluidity of a usb 3.0 monitor setup and a usb 2.0 one is quite noticable. The adapters are really pretty gentle on your processor though, so no big worries there. I know other companies have produced solutions for multiple monitors earlier, but those looking for extensive monitor setup nowadays should test a multi monitor usb 3.0 hub from DisplayLink. And if you are going to the desolute place that doesn't have any kind of stationary monitors available you can always get one of the highly affordable, portable USB displays(Also Displaylink) and put it in you backpack. But we don't have to stop there. Finally good ultra - portable projectors with HD - resolution have started to hit the market, and I mean projectors that both have decent spesifications, are extremely portable and don't have lamps that have to be changed. Brightness, colors and resolution have usually been poor in these kind of devices, but the bar has been raised.<br />
<br />So what else would a nomad designer need ? Well, for one thing touch would be nice! And while we're at it, graphical capabilities would also be something many would crave. So lets have a look at the options. If you are using a internet tablet with touch( Android or ios), you can now use it as an extended desktop. A lot of tablets have something called a ADB composite interface(Android Debug Bridge), which is a way for your computer to interact with your tablets file system. It is also a way of enabling software developers to make applications that let you control your computer from your tablet, not only your tablet from your computer. An example is the software application <a href="#" onclick="MM_openBrWindow('http://www.shapeservices.com/en/products/details.php?product=idisplay&platform=android','','scrollbars=yes,resizable=yes,width=625,height=625')">IDisplay</a> from Shapeservices, which lets you connect your tablet via the composite USB cabel and use your tablet as an extended desktop. The nice thing about this is that you can use input from your tablet(Touch with fingers, stylus pen, keyboard, mouse) to control applications on your computers operative system. While graphically this is mostly for sketching, it can also be used succsessfully in other applications. Also this software enables you to connect through any wireless connection, so you are not limited to the composite cable if you don't have it. Which brings me to the point of networks.<br />
<br />4G wireless modems have hit the market some time ago, but they are not limited to a dongle in the side of your laptop. In fact they can and will feed your whole household with an internet connection if you use it right. Simple as this: Almost all routers use linux software, so the problem has been developing drivers for using the USB 4g dongles with a USB - enabled router. I am currently very successfully using a <a href="#" onclick="MM_openBrWindow('http://www.draytek.com/user/PdInfoDetail.php?Id=121','','scrollbars=yes,resizable=yes,width=625,height=625')">Draytek</a> Vigorfly200 802.11b/g/n router connected to my Netcom 4g dongle, and besides being fast I can take it with me everywhere and (depending on location) still get the same fast speed for everyone to use. If you are streaming or connecting devices wirelessly, this is gold! They have written drivers for 4g dongles, so a firmware update does all the work for you.<br />
<br />But, returning to graphic designer work, there are some options that I feel have completely erased the need for things like the traditional paper - based drawing surface. The reason I am saying this is that these tools are so precise and make the transition from computer to drawing so minimal, that the thought process of designing/programming/sketching becomes a lot more interesting and intuitive. The problem with relatively great products earlier that use a separate mat surface for drawing, separate from the screen, is the hand/eye coordination. I have used one myself and still occasionally do, but there is no question whatsoever that seeing the direct result of your brush stroke without having to move your eyes one way or the other is a better way of interacting with your work. Why drive your car with a remote control if you can sit inside ? Let's go straight to the products, and you can judge for yourself. The king of the hill is as of now the <a href="#" onclick="MM_openBrWindow('http://www.wacom.com/en/Products/Cintiq.aspx','','scrollbars=yes,resizable=yes,width=625,height=625')">Wacom Cintiq 24HD</a>, which lets you draw on a supreme ergonomical- design monitor with detailing and specifications that will satisfy any business. It works also of course as an extended desktop, so again you get increased productivity. I am not going to say more, but take a look for yourself. Of course, these products are kind of pricy, but there are alternatives. Chinese Yiynova produce three notable drawing monitors in <a href="#" onclick="MM_openBrWindow('http://www.amazon.com/Brand-Yiynova-Digitizer-Tablet-Display/dp/B005EDNAPU','','scrollbars=yes,resizable=yes,width=625,height=625')">10"</a>, <a href="#" onclick="MM_openBrWindow('http://www.amazon.com/Yiynova-Monitor-MSP15-Adjustable-Support-Windows/dp/B005EIF3BY','','scrollbars=yes,resizable=yes,width=625,height=625')">15"</a> and <a href="#" onclick="MM_openBrWindow('http://www.amazon.com/Yiynova-Tablet-MSP19-19inch-1440x900/sim/B004CUT6NG/2','','scrollbars=yes,resizable=yes,width=625,height=625')">19"</a>, and while their spesifications are as good as most of the wacom's, the prices are way lower. Again, you have to decide for yourself.<br />
<br />Moving on to add- on products, I would like to mention the standards of EsataP and USB 3.0. If you have a 2 year old mid - range machine, chances are you do not have the new USB 3.0 ports. For quite a while I have been using the esatap ( external sata powered) port on my computer for external harddisk backup. SATA is a computer bus interface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. On a lot of laptops or desktops you have the possibility of either installing an esata card or you may have an esataP port on your laptop. What you in fact then have is a combined USB/esata port with speed that nearly rivals the new USB 3.0 standard. Using an esatap cable you can get up to 100 MBytes/s transfer speeds to or from your external drives for now. The port conncets directly to your sata harddrive, so the theoretical speed is 3GBit/s which is 375Mbytes/s, or in practice more like 300MB. If you have one of these ports I strongly suggest you use it. People have made a big deal about the need for shutting down your system before removing your esatap device, but that is completely unneccesary. I will just say <a href="#" onclick="MM_openBrWindow('http://mt-naka.com/hotswap/index_enu.htm','','scrollbars=yes,resizable=yes,width=625,height=625')">HotSwap</a>.<br />
<br />If you have an expresscard 34 or 54 slot you can of course add an expresscard with usb 3.0 port/s, but tests show that the expresscard interface and the 2.5Gbit/s limit of your revision 1.0 or 1.1 pci-e will not give you full USB 3.0 speeds, and even if you had a revision 2.0 or later (5GBit/s), you would still have to have have the ExpressCard 2.0 slot on your machine, as only this makes use of the full bandwith of the USB superspeed(3.0). With the more ordinary ExpressCard 1.0 slot you still get 2.5 GBit/s which is actually very much faster than USB 2.0.<br />
<br /> More to follow.....</p>
</div>
</div>
    <div class="slider" input type="range" name="eivi" max="-6" min="2000" step="1" value="0">
    <div class="progress" style="width: 3px;"></div>
    <a class="handle" style="top: 0px;"></a>
</div>

<script type="text/javascript">
// get handle to the scrollable DIV
var wrapperExt2 = $("#wrapperExt2");
// initialize rangeinput
$(":range").rangeinput({
// slide the DIV along with the range using jQuery's css() method
onSlide: function(ev, step) {
wrapperExt2.css({bottom: step});
// display progressbar
progress: true,
// initial value. also sets the DIV's initial scroll position
value: 0,
// this is called when the slider is clicked. we animate the DIV
change: function(e, i) {
wrapperExt2.animate({bottom: i}, "fast");
// disable drag handle animation when when slider is clicked
speed: 0
</script>
<script type="text/javascript">
$(function() {
var el, newPoint, newPlace, offset;
// Select all range inputs, watch for change
$("input[type='range']").change(function() {
   // Cache this for efficiency
   el = $(this);
   // Measure width of range input
   height = el.height();
   // Figure out placement percentage between left and right of input
   newPoint = (el.val() - el.attr("min")) / (el.attr("max") - el.attr("min"));
   // Janky value to get pointer to line up better
   offset = -1.3;
   // Prevent bubble from going beyond left or right (unsupported browsers)
   if (newPoint < 0) { newPlace = 0; }
   else if (newPoint > 1) { newPlace = height; }
   else { newPlace = width * newPoint + offset; offset -= newPoint; }
   // Move bubble
   el
     .next("output")
     .css({
       top: newPlace,
       marginLeft: offset + "%"
     .text(el.val());
// Fake a change to position bubble at page load
.trigger('change');
</script> */
<script type="text/javascript">
if (Get_Cookie('homeHardware')) { document.getElementById('homebutton2').src="images/HomeButton_03.png" ; }
if (Get_Cookie('PluginFromHardware')) { document.getElementById('PluginM2').src="images/PluginTheory_05.png" ; }
if (Get_Cookie('ScriptingFromHardware')) { document.getElementById('Scripting2').src="images/Script_07.png" ; }
if (Get_Cookie('umlToolsFromHardware')) { document.getElementById('umlTools2').src="images/umlPage_12.png" ; }
</script>
</body>
</html>
CSS ( for the "bubble element"):
/*.output {
    position: absolute;
background-image: -webkit-gradient(linear, left top, left bottom, from(#444444), to(#999999));
background-image: -webkit-linear-gradient(top, #444444, #999999);
background-image: -moz-linear-gradient(top, #444444, #999999);
background-image: -ms-linear-gradient(top, #444444, #999999);
background-image: -o-linear-gradient(top, #444444, #999999);
    width: 30px;
    height: 40px;
    text-align: center;
    color: white;
    border-radius: 10px;
    display: inline-block;
    font: bold 15px/30px Georgia;
    top: 50%;
    left: 100%;
    margin-top: -195px;
    margin-right: -185px;
    margin-bottom: 1%;
    margin-left: -180px;
    /*bottom: 175%;
left: 0;
margin-left: -1%; */
.output:after {
content: "";
position: absolute;
width: 0;
height: 0;
border-top: 10px solid #999999;
border-left: 5px solid transparent;
border-right: 5px solid transparent;
top: 100%;
left: 50%;
margin-left: -5px;
margin-top: -1px;

I would use jQuery UI Slider for this -- click on examples for other options.
http://jqueryui.com/demos/slider/#slider-vertical
Nancy O.

Similar Messages

Show values beside Bar of a chart

Hello world,
within a chart I like to show the values beside/of the bar.
Is this possible? ...and how
Thank you.
Ralf Müller

In MII 12.0 and prior, the default behavior of the various Bar mode of the iChart is to put the number below the bar.
MII 12.1 introduces the ability to have this number placed inside the bar chart area, like on top of the bar.
Regards,
Jeremy

Show value in "customer" field of FAGLB03

Hi Experts,
we have a requirement to Show value in "customer" field of FAGLB03 for all sales related transactions.
Your support is appreciated.
Thanks

solution has been implemented using badi FAGL_ITEMS_CH_DATA

Proper showing value of a column type chart in BI 7.0

Hi,
I am in BI 7.0. I created a Web template with column type chart. I want to show the column value only when users move the cursor on top of the column.
The problem is when system showing value also show the category/serious and category description. Is there any way to show value only?
Thanks for your help,
Frank

Hi Wond,
Thanks for your quick response.
Your solution is for BW 3.5 or BI 7.0? I remember with BW 3.5, WAD has chart property and option. But, I dont think BI 7.0 has chart option. I am with BI 7.0. I clicked on property and nothing happens. I dont know is my system setup issue or other. When I modify chart property, I have to use Edit -> Wizard or Refine.
Any other solution?
Regards,
Frank

How to show value of COUNT_QUERY in a text Item?

please tell me how to show value of COUNT_QUERY in a text Item?

If you look a bit further down the thread Rosario posted, you might find the method DanielLiang posted to be easier to implement for you.
you can use calculation:
example :
Database Data Block: block1 ( Query All Records : Yes )
not Database Data Block : block2 (Single Record : Yes)
block2 has a text item (number) ,it calculation property :
calculation mode : summary
summary function : count
summarized block : block1
summarized item : item1(block1's item)

Need to create a report to show values for a particular date range

I have to create a report, out of which I need two columns : << Customer Value Variance and Churn Score Variance >> to show values only for a custom date range, which will be entered via a dashboard prompt.
These generic date columns are not present and cannot be added. I have to make use of Pres variables
What I have currently done is:
1) Created a prompt with 2 different date columns and passing those values into variables vStartDate and vEndDate. (I don't actually need those 2 column which I have selelcted, but I have taken those so that I can prompt the values in calendar format and pass onto the variables)
2) Created report with necessary columns, with 2 extra columns (hidden) as vStart Date Column and vEnd Date Column which take the values from the presentation variables defined in the prompt. I have created these columns as then I can reference these in the two required columns if necessary.
I am already facing error in report after doing this and I am confused how to proceed. Any suggestions?
Thanks.

Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

Req: to show values of a poplist dependent on values of another poplist

Hi,
I have a requirement to show values of a poplist(poplist2) based on the values selected from another poplist(poplist1).
Ex : when A is selected from poplist1 , poplist2 should show 1 and 2 as values. When B,C are selected from poplist1, poplist2 should show 1 as value.
i am using Jdev version JDeveloper10.1.3.1
Please help in acheiving this requirement.
Thanks,
Pavan.

Do you use ADF?
if yes, you should have a master-detail relation in the DataControl.
and then in the first combo put autosubmit=true and in the second combo put partialtrigger to the first

Flash 2D Bar CHarts suddenly showing Values

Hi,
We have just upgraded to Version 3.1.2 and we have seen a strange change in our Flash Horizontal 2D Column (percent) charts.
The charts used to work fine but now we see Value Text being displayed over the bars. I cannot find anyway of removing these values from display.
We have a Series 1 simple query that counts the number of items where signed_flag = 'Y' and the number of items where signed_flag = 'N'. This therefore shows two stacked bars that total 100%. Everything was fine, but now the charts are showing the text 'Singed Off, 25%' and 'Not Signed Off, 75%' over the bars (and over the labels).
I cannot find a way to hide this text. If I open the Chart Attributes and look at the Display Settings the 'Show Values' check box is empty but grayed out. I cannot change this. I have also tried changing the font settings for every available item and this has no affect either - the text is displayed in the same size/colour etc. whatever I do.
Can anyone help? Is this a 3.1.2 bug or has something changed at macromedia?
All assistance is gratefully received.
Martin

Hi Martin,
Thanks for posting the metalink number. For others that run into the same issue here's MetaLink's Solution:
1. Download and unzip the 3.1 installation medium:
http://www.oracle.com/technology/products/database/application_express/download.html
2. Find the /apex31/images/flashchart/Stacked2DColumn.swf file.
3. In the directory where the 3.1.1 images reside, find the /images/flashchart/Stacked2DColumn.swf file.
a. Rename the original file (Stacked2DColumn.swf_orig)
b. Replace the 3.1.1 version of <directory name/images/flashchart/Stacked2DColumn.swf with
the 3.1 version of Stacked2DColumn.swf into this directory.
Martin
[http://apex-smb.blogspot.com/]

Formula in Excel Sheet shows #VALUE!.

Hi,
I have 11gr2 Forms/Reports with Windows Server 2008 64-bit.
I have Excel sheet imported from Oracle Reports with destype=enhancedspreadsheet.
Problem is in my Excel sheet, that when I add formula to multiply two columns, it shows #VALUE! error, which is actually occurs
when we multiply a text column with number column.
Although values in columns in number format (like 8600.000,45.000), it assumes these as text column and when
I re-enter same values in columns manually, formula column shows result without any error.
Is there any settings in REPORTS to avoid this error ?
Thanks with Regards.
Bhatt.

Tom,
This may seem like a stupid comment but have you checked to see if the excel formulas were put into the layout in the layout definitions screen and not in the layout while executing the layout? Also does the layout have dynamic columns?
For example, if I have 12 Dynamic columns for the periods of the year based on a variable it would only show up in the layout definition screen as 1 data column but would be 12 columns on executing the layout and thus the Excel Formula need to be in the 13th column rather than the 2nd column
Hope this helps,
Mary

DB02 is not showing values

hi
recently we upgraded from 4.6c to ECC6.0, DB02 is showing values as below
DB Name       PP8        Started       13.04.2008
DB Server     p690db                   00:37:55
DB Release    10.2.0.2.0
      Name         DEFAULT                               Filling degree:
DB system:        ORA
Size:                     0.00 GB                       Total size:                   0.00 GB
Free Size:                0.00 GB                       Total free size:              0.00 GB
Used:                        0 %                        Total used:                      0 %
      Total number               0
Maximum size:                0.00 MB ()
Maximum # segments:             0     ()
      Total number               0
Maximum size:                0.00 MB ()
Minimum free space:          0.00 MB ()
                           Tables              Indexes               Others                Total
please suggest me how to get values

Hi,
Refer to note 731831- Transaction DB02 always shows 0 as the number of tables.
Regards,
Maheswaran

How do I get the student's answers to show on the next slide for drag and drop interaction?

I'm working with Captivate 7 on a computer running Windows 8.
I created a simple, one-to-one drag and drop activity using the Drag and Drop Wizard.
I want the student's answers to show on the next slide. Specifically, I want the drop source to show with the drag target that the student connected to the drag source. This way the student can review his/her answers while the program discusses the correct answers.
Is there anyway to do this?

* You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden (View > Toolbars > Customize or right-click a toolbar).
* If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily.

After deactivation asset still shows value in AR03 cumulative value

Dear All
After deactivation of an asset , it still shows value in AR03 cumulative acq value column. can somebody guide us
where my client is lacking as we deactivated the asset on 14.05.2008 in AS02 and transfer the asset value thrru ABUMN
but still the same asset is showing the value on 31.03.2009 .
Thanks in advance
VG

Dear Srinu
Does Deactivation really need manually entry of writing date in AS02 or date generates automatically thru ABUMN.
As i have already transfered value thru ABUMN and created one new asset against it.
The new asset is working properly but my deactivated my asset is quite trouble some. If I tick the box in Depreciation area
which is for deactivation, will all assets under that class will be deactivated ?
I just had same ABUMN procedure and my asset got deactivated.
I had one asset which is deactivated in 2008 mid, In 2008 AR03 shows 0 value but 2009 it shows its cumulative value.
In tag line my asset should not show the value after it's deactivation in AR03.
Please have some inputs on this.
Regards,
VG.
Edited by: viral guruji on Jul 2, 2009 12:30 PM

Problems showing Values in a DROPDOWNBYINDEX

Hello together,
I've got a problem of showing values in a Drop Down Box.
I've got 1 Dropdown box, 1 button and a text field. In the text field i'm wirting a carrid for example AC.
If i press the button in the Drop down box should show the name to the corresponding carrid for example Air Canada.
this is my code till yet. But i don't see what's missing.
Maybe anybody can help?
Data: context_node type ref to if_wd_context_node.
Data: it_carriers TYPE STANDARD TABLE OF scarr,
        wa_carriers LIKE LINE OF it_carriers,
        wa_carrid(3) TYPE c.
context_node = wd_context->get_child_node( 'DROPDOWN_CARRIERS' ).
context_node->get_attribute( exporting Name = 'CARRID' importing value = wa_carrid ).
select * from scarr
    INTO wa_carriers
    WHERE carrid = wa_carrid.
    APPEND wa_carriers TO it_carriers.
ENDSELECT.
context_node = wd_context->get_child_node( name = 'CARRID').
context_node->BIND_TABLE( new_items = it_carriers ).

Get the selected row by using code wizard and use the values of the structure whereever you want. Refer to the below code:
Suppose I have a Node NODE_OUTPUT and binded with my table UI element. We need to get the selected row (ls_node_output) in my Button UI event handler method as below:
    DATA lo_nd_node_output TYPE REF TO if_wd_context_node.
    DATA lo_el_node_output TYPE REF TO if_wd_context_element.
    DATA ls_node_output TYPE wd_this->element_node_output.
navigate from <CONTEXT> to <NODE_OUTPUT> via lead selection
    lo_nd_node_output = wd_context->get_child_node( name = wd_this->wdctx_node_output ).
get element via lead selection
    lo_el_node_output = lo_nd_node_output->get_element( ).
get all declared attributes
    lo_el_node_output->get_static_attributes(
      IMPORTING
        static_attributes = ls_node_output ).

Trouble with Parameter Option - Show Value or Description

First off we are on BI 4.1 SP01 Patch 6. I have a Crystal Reports 2013 report with a lot of optional parameters some of which are based on dynamic lists of values which I created using Business View Manager.
My hope would be that whatever values I select would be shown in the Prompt Panel on the left side of the screen.
Rather than displaying the value of "Limited Liability Company" for the Organization Type I get the code of "06".
That is the correct code and it works from a functional perspective, but I want to see the description. To get to this point in my Crystal Report I created a parameter based on a Dynamic List of Values created in Business View Manager called OrganizationType with the following settings...
That in turn creates something in Business View Manager called "OrganizationType - Prompt Group". If I edit my Organization Type paramter in Crystal Reports I see that it is now based on that OrganizationType - Prompt Group and not Organization Type LOV I had just selected. When I look at the OrganizationType - Prompt Group in Business View Manager the Show on (Viewer) Panel and Show Value or Description options are not what I set them to be in Crystal Reports.
My expectation when choosing the "Show Description" setting for the Show Value or Description option would cause the Description to be shown in the prompt panel. Is that correct? If so, then why isn't this setting sticking. If not, how do I do that?
I realize that I could create my LOVs based on just the Description rather than the ID and Description and filter on the Description rather than the ID, but I shouldn't have to. This should work shouldn't it? What I am doing wrong?
Thanks,
Noel

I now understand that the "Show Value or Description" option will have no impact on my situation.
As you can see in my screenshots I have the "Prompt With Description Only" option set to "True". Within Crystal Report I am seeing the Description as expected in the Parameters panel...
However, when I run the report from the BI Launchpad I see the code ("06") rather than the description ("Limited Liability Company")...
Is this a bug?
Noel

Showing values of each slice of pie chart

How to display the values of each slice of pie chart in the chart without selecting each legends like a pointer showing values of each slice ?
Edited by: Rimily on Aug 4, 2011 9:18 AM

Hi,
Please go through below Thread may be usefull
[Mouse Rollover]
hope it helps!!
Regards,
Manoj Bilthare

Showing values beside html5 slider

Similar Messages

Maybe you are looking for