Sign of data changes from DEV to QA

Hello,
I have a script that posting huge number of records. the script has no issues. All the records posted are oK in QA but in DEV all the signs change(positive,negative). Please advise.
Thanks.

The whole logic is about 300-400 lines. But here is the part that actually creates the records. Also keep in mind that it works fine in QA and production. so it probably has something to do with Appet measures or database settings?
*RUNALLOCATION
FACTOR=USING(-1)
*DIM ACCOUNT       WHAT<>AA_MISC;                                                    WHERE=<<<;            USING=AA_MISC
*DIM DATASRC                       WHAT=ADJ,JRNL,PCA;   WHERE=REASSIGNED;     USING=MATRIX
*DIM COSTOBJECTS              WHAT=C_10001;                                                               WHERE=<<<;               USING=NO_C
*DIM FUNCTIONALAREA         WHAT=FA_300;                                                                WHERE=<<<;               USING=FA_301
*DIM TIME                               WHAT=%TIME_SET%;                                                     WHERE=<<<;                USING=2010.INP
*DIM RPTCURRENCY              WHAT=LC,USD,DC,CC,NA;                                               WHERE=<<<;                USING=LC
*DIM COMPANY                      WHAT=%DENTAL_CO%;                                                   WHERE=<<<;               USING=<<<
*DIM PROFITCENTER              WHAT=BAS(PC_PARET);                                                     WHERE=<<<;                USING=<<<
*DIM CATEGORY                     WHAT=ACTUAL;                                                       WHERE=<<<;                USING=ACTUAL
*ENDALLOCATION
I would be happy to post the whole script if you think thats necessary. thanks..

Similar Messages

Best method to transport changes from DEV to Prod Environment

Hi SDNers,
I have a requirement here :
I have made some changes to the DEV environment, which i want to move to the production Environment.
Changes mainly include the Structural changes, XSD's, Import maps, Remote systems, Export Maps, Validations etc. Please note that I DO NOT WANT to transport the data from DEV to Prod environment.
I can see 2 options available :
1. Export/Import Repository schema - But as far as i know, the import and export maps will not be transported auomatically through Export/Import Schema.
2. Archive/Unarchiving Without data -
Here are my questions :
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
2. Will it affect the data in Prodcution in any chance?
3. Is there anything Archiving/Unarchiving without data cannot handle.
4. Will it impact any other normal running of Production environment.
Please respond to my queries.
Thanks and Regards
Nitin Jain

Hi Nitin,
If you use Archive/UnArchive option without data then you cannot persists the PROD env since you need to UnArchive the entire repository which is empty and then you need to move the PROD data into this repository.
1. Is the 2nd option feasible looking at the changes I need to transport? If yes, is there any recommended guide available by SAP suggesting the 2nd option for trnasport mechanism.( Please sendme the links)
Ans. I don't think, 2nd option is feasible as a mentioned earlier. This option should be used when we need the entire repository without data which is not the case you are looking for.
2. Will it affect the data in Prodcution in any chance?
Ans. If you are using 2nd option then this question is not related because when you UnArchive, you will get the new repository so this wont affect the existing repository at all.
3. Is there anything Archiving/Unarchiving without data cannot handle.
Ans. Workflows
4. Will it impact any other normal running of Production environment.
Ans. If you are using 1st option then you need to unload the PROD repository first and then import the changes. For option 2 its not related.
Regards,
Jitesh Talreja

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

How to reflect the Master data changes from ECC to MDM

Hi Experts,
We need to reflect the master data changes of company code and cost center groups from ECC to MDM.
what methods available and which would be best in performance.
kindly let me know if you need further information for better undrstanding.
Thanks in anticipation
looking forward to hear from you all,
with regards,
Chandhan.S

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

Why did my sign in screen change from black to red?

For no obvious reason (which frustrates me the most out of any computer issue...) my computer sign in screen has changed from back to a pale red color. Though the computer still seems to be working properly *(except a bug change in iPhoto), I want to know if something bad is coming. People usually want to know why something they paid for is changing. Do I need to worry?
* iPhoto has decided to not import my new photos from my card and reader. It got started, and somewhere on the way sat there with nothing to show something was working.... the whirling thing or anything at all. When checking on it, by clicking on "eject" or trying to leave iPhoto, or even turn the computer off, it popped up a message saying to was still importing photos. It stayed like that for a day. I had to force quit but that's not an answer .What's going on? Can I trust importing photos again?

Reset PRAM. http://support.apple.com/kb/PH18761
Start up in Safe Mode. http://support.apple.com/en-us/HT1564

Transferring Product Master Data Changes From APO to ECC/R/3

Is it possible to transfer product master data changes in APO to ECC via the CIF? If so, does it require custom coding?

Hi James,
In all the different clients where APO is being used with ECC systems. ECC system is always the main system (system of record) which contains all the master data and data present in ECC supposed to be the reference for APO system for planning purpose.
Generally it is not recommended to transfer master data from APO to ECC but as mentioned earlier by some experts you may have ways to do that.
I would be interested in the business scenario where one needs to transfer master data from APO to ECC.
Thanks,
Anupam
Edited by: Anupam Sengar on Aug 11, 2011 12:31 AM

Error while transporting data source from Dev to QA

Hi , I am transporting 0glaccext hier data source. I created the transport with the the transfer rules and the corresponding Infopackage. when I collect the transfer rules I have 4 transfer structures present in the transfer rules which are
" 0GLACCEXT_T011_HIER_BA1" BA2 , BA3 and BA4. when I am importing the data source, I am getting the following error messages
"Mapping between data source 0GLACCEXT_T011_HIER and source system QASCLNT400 is inconsistent"
and then
"Reference to transfer structure 0GLACCEXT_T011_HIER_BA1 not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 0GLACCEXT_T011_HIER_BA1 should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 0GLACCEXT_T011_HIER_BA1 is on the same transport request. Use the transport connection to create a consistent request."
Any suggestions on how I need to handle this issue.
I am able to load the data succesfully in Dev and I am not have

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Dates change from Numbers generated xls file when copy/pasted

I've saved a Numbers '09 file as xls and sent it to an Excel 2003 for Windows user. The file looks great when they open it in Excel 2003. But, when they copy and paste data into a different Excel 2003 file, the date changes about 4 years, which seems to make this a 1900/1904 issue. But why? If Excel 2003 opened up the original xls file generated by Numbers ok, why can't the dates be copy and pasted into another Excel 2003 spreadsheet?

Apple uses a year pattern that starts with the first day of the first leap year in the 20th century.
Microsoft originally adopted a year pattern that began with the first day of the last year of the 19th century (1900) which, although it was a year divisible by 4, was not a leap year.
Later, MS added the 1904 start pattern, but kept the1900 start pattern as well.
What is likely happening in the case you describe is this:
When Numbers traslates the document into Excel format and saves it, Numbers apparenly includes the flag that tells Excl 'use the 1904 start for dates.' Excel open the file, reads the code, and sets the calendar accordingly.
When the Excel 2003 user then copies the data frm that document, the copy picks up only the date serial number(s), and does not get the coded flag identifying which date system is in use.
That data is then pasted into the new Excel document, and with no flag to tell it different, Excel uses its 'normal' setting—the calendar starts on January 1, 1900—and all dates are interpreted as being four years earlier than they were in the original Numbers table or in the first Excel sheet.
I'd assume there is a setting that can be changed in Excel. Where to find it/how to use it would be a good question for an Excel community discussion site. (Although it's possible an answer might arrive here as well.)
Regards,
Barry

How to Transport changes from Dev. to Quality and production

Hello Friends,
I've done the below changes in IR
1.Added idoc in Imported Idocs
2.Added new Interface Mapping
3.Added new Message Mapping
In ID:
Chagned Receiver Agreement
Changed Interface Agreement
Please let me know how i can move the changes to Quality and Production..
Pls. provide me the steps to create Transport and how to transfer.
Thanks in advance!!!
Best Regards
Prasad

Hi,
By using File system or cms you can transport, better to do the configuration steps manually to avoid ther errors.
We can do some changes to move
Moving Dev to QA changes
1.SLD: are there any changes we need to do.
If you have common SLD, then I doubt if you may need any changes on SLD side.
The Business systems you had used will be the same you may use in Q-Landscape.
2.IR: are there any changes we need to do.
---> No changes required, you need to export .tpz file from Development box and have to import it in Q-box
3.ID: do we need to recreate it fully or after importing,just change the Communication channels will
do.I am confused here.
You need to reconfigure all communication channels, if SLD changes are OK then business system will
change automatically and in communication channel just filled in correct IP/password etc.
---> Similar to IR, you can transport these objects also. But you may need to do related changes to communication channels, if you will be referring to different Sender systems and Receiver systems.
Then as mentioned in previous posts you may need to maintain those Business systems in SLD also.
4.RWB: such as alerts,and if there are any...
--> The Alerts will not be transported....you need to create it as new setup for every box.
Check this link
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm

Changing from dev to standard edition causes "Could not obtain information about Windows NT group/user error code 0x6e."

Hello,
We recently upgrade our SQL Server 2012 SP1 (64bit) dev edition to standard edition, after we purchased the required licence and it was deployed in production.
Since the edition change, we are now receiving the following error, with some of our jobs, which have an e-mail step in them, which is causing the jobs to fail.
Msg 14661,Level 16, State 1, Procedure sp_send_dbmail, Line 517
Query execution failed: Msg 15404, Level 16, State 19, Server BL-SVR15, Line 1
Could not obtain information about Windows NT group/user 'BLUELIZARD\savaa', error code 0x6e.
Any ideas how to fix this issue? We were also having a similar error, when executing the jobs, but changing the job owner to SA has fixed this issue.
Thanks,
Andy.

Hi,
Which user account you used for SQL Server service, domain account or local account?
If it is domain account, are you able to log in to a machine with it?
Make sure that the password of account is not expired.
Also, grant the user Allowed to Authenticate permission and see how it helps.
Refer to the below article:
http://geeks.ms/blogs/ozonicco/archive/2013/01/14/208266.aspx
Thanks.
Tracy Cai
TechNet Community Support

Shipping date changed from 10/28 to unkown? Canceled order?

I ordered an iPhone 5s on 10/11. Since then, it has shown a ship date of 10/28, until last night. Now under the "expected ship date" it says "not available at this time". What in the world does that mean? Have these orders been pushed back, yet again? I ordered a 16gb space grey one and I thought those were shipping sooner than the gold ones. I am a brand new customer to Verizon wireless and I received an email last night saying my order was canceled. I called and they assured me that it is still in the system (once they finally found my order) and that it looked like somehow another order was "accidentally" placed by the system and that order was canceled. The weird thing is that the canceled order number is the same order number as the iPhone I ordered and not the Note 3's I ordered because I ordered them separately.
I've seen numerous posts about orders accidentally getting canceled. I don't understand how their system can be THIS bad. This isn't exactly appealing to someone who is a new customer of this company. I had no choice but to switch to Verizon from another company due to us moving and not having service anymore with our prior cell company. I'm a little frustrated.

While speaking to my "other" cell company getting my final bill in order, with the exception of that one line I am waiting to transfer, a rep there told me their grey and silver iPhones are shipping in 3-5 business days consistently. She even double checked when I was on the phone, for argument's sake, and confirmed it. I have ONE out of 3 lines left on my other provider due to the delayed shipping of the iPhone 5s. I am really trying to avoid having to pay another month's service there and have until November 2nd to port that last number over because my new billing cycle starts on the 3rd. If the shipping gets pushed back further, it's not going to be favorable for me and I'll end up paying 2 different companies for another month. I also can't just delete the other line or my daughter will be left at school without a phone and in this day and age, I'm not willing to do that.

4 have sam3 family iphonee icloud id if one can change automaticly data change from other how to devide all of in different apple id

plz sove my problem as soon as possibel ,

Read this tip which is also valid for IOS 6 & 7.
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

Exporting changes in IR and ID from DEV to QA

hi
i have the following questions in XI Tranports.
1). If i changed my mappings in IR, how to export these changes from DEV to QA ?
2). If i changed configuration in ID , how to reflect these changes from DEV to QA ?
3). What configuration i need to do in R/3 QA (like port, sm59 or partner profiles) ?
thanks and regards
Abhijit

Hi,
U can export the changes either using File transport method or using CMS transport method.
Two types of transport mechanism are used in PI.
     File transport method.
     CMS transport method.
File transport method:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
CMS transport method:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
     CMS for SAP Exchange Infrastructure:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
     How to handle Xi with CMS:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
     Configuration of CMS in Central NWDI & SLD to transport XI objects:
/people/praveen.mayalur/blog/2007/05/31/configuration-of-cms-in-central-nwdi-sld-to-transport-xi-objects
     XI Software Logistics Solution III: CMS:
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
In ID u need to change the communication parameters manually.
Chirag

Long DDIC Activation for Master Data Change During Transport

Good Morning Folks,
During transport of a change to a custom master data object to production, the data dictionary activation is taking a very long time and using a very large amount of space.
The change to the master data object was adding three additional navigational attributes. This master data is not time-dependant. The master data contains about 1.2 million records and has 49 active navigational attributes u2013 including the three new ones. The Data Dictionary activation is executing report SAPLRSDU for more than 8 hours and is using upwards of 52GB of temp filespace (of 92GB allocated) during this time. To the best of our knowledge, it looks as if it is trying to recreate or repopulate the /BIC/Pxxxx table of the master data. It looks like it's reading billions of records (probably the same 1.2 m records over and over.)
There are no errors in any logs that we can see.
Previous changes to this master data object have been successful, and reasonably fast. And the transport of this change from Dev to our QA environment was very fast.
We still need to get this change in, as well as additional changes that are dependant. Why would this take so long, and is there anything we can do to get this to run faster?
BTW: We are on 3.5 (but looking forward to NW7.)
Thanks, Brian

Brian,
Usually adding nav attributes would mean that the X and y tables get regenerated...
Also do you notice reads only on the P-Table or other tables which have this object as well..?
If it is only the P Table - try refreshing the stats for the same...

Application component Hierarchy Transfer from Dev to QA

HI,
We need to transport the application Component Hierarchy from r/3 dev to r/3 qa .
when we select the datasources and click the transport button it does not show up a transport request.
when i tried to run RSA9 transaction in r/3qa it does not get executed and says " no changes allowed" as the system is locked . Our r/3 qa is locked so that no changes are allowed in the system as testing is under progress. our application component hierarchy looks blank with no data sources .
Is there any work around so that i can transfer the application component hierarchy in r/3 qa so that i can replicate the datasources on the bw side or should we open the client and run the RSA9 transaction so that the application component hierarchy is visble and replication can be done on the bw side.
I can only transfer Data sources from Dev to QA. Since I am not able to transfer the "Application component hierarchy" I cann't replicate the Data Sources into BW.
Thanks in advance for your advise.
Regards,
Mani

I believe the problem is that your app comp hier is not assigned to a package. You need to change this from $TMP to some other package. You can do this using the transport organizer tools transaction SE03(Change Obj Directory Entries). The object type is dsaa. If you search RSA9 in OSS I think you'll find some mention of this.
good Luck

Sign of data changes from DEV to QA

Similar Messages

Maybe you are looking for