Simple IP Phone Service Issue

I am developing an IP Phone Service. I am creating a IPPhoneTextObject and have added several soft keys. This works fine, however, on the phone (7945), If I push one of the soft key buttons, the phone displays: "That Key Is Not Active Here"
Anyone have any ideas? I sincerely appreciate your time.
Michael

Thank you so much for the reply. I greatly appreciate it. That was a typographical error on my behalf. Here's the current XML that is generated & I still recieve the same error.
IP Phone Service
Button Configuration...
Developed By M. Smith
Button1
http://10.1.0.75/Page2.aspx
1
Button2
http://10.1.0.75/Page3.aspx
2
Button3
http://10.1.0.75/Page4.aspx
3
Button4
http://10.1.0.75/Page5.aspx
4

Similar Messages

Phone Services issue after upgrade to 10.X

We recently upgraded a system from 6.X to 10.X, there is a Speed Dial URL service that points to an xml file. The IP address of the webserver needed to be updated.
The Service name is Speed Dial and it displayed twice on the phone, even though the phone is only subscribed to one service. If a phone has no services, when the Services button is pressed it comes up with a Host Not Found Error and the Service it has Listed is Speed Dial.
If a phone is registered to the service and both are listed the top one works as expected but the 2nd entry gives the Host Not Phone. If a phone is only registered to the Ext Mobility Service, it still displays the Speed Dial Service. I can't find anywhere that this service is associated with the device.
Anyone have any suggestions?
Thanks,
Joe

Hi Joe,
If the service is appearing automatically on all the IP phones it could be due to the Enterprise subscription option being checked for that service. Can you try deleting the service and adding it again without the enterprise subscription option and then assign it to the phones that you want to.
HTH
Manish

Apps Don't Always Load - Phone or Service Issue?

I have the iPhone 4S (AT&T as my provider) and awhile back when I did the software update iOS 5.1.1, I am now running on 4G. Now, I've heard many things about 4G - that it doesn't make your phone load any faster, it's not really 4G, etc. However; even with full bars when I try and run my apps (i.e. Instagram. FaceBook, games, basically anything require an Internet connection), it often "times" out and cannot load the app. I also have trouble sending and receiving e-mails, and text messaging as well as with Safari. I have had to turn off iMessaging because it always fails to send. I'll get error messages saying my connection has timed out, cannot refresh feed, server cannot be reached.. Obviously when I am connected through Wi-Fi, I have no issues but when I am only connected through 4G/Edge. Has anyone ever encountered this problem? Is this a service issue with AT&T or is it my phone that I will need to bring in to Apple to have them check out?

Thanks for the suggestion, and I realized I forgot to include that I have tried exactly that! I've tried to reset my phone as well as restore it to factory setting hoping there was some glitch and it'd be gone by doing the reboot but nope. It's just frustrating because I can see I have good signal yet my phone isn't working like it should be. Plus, it's not like having the iPhone is cheap!

3G service issue

Starting to have major issue with my 3G service at home. It will show I have 3G then drop the 3G anytime I try to use the internet on my phone or the hot spot. Some times it will let you connect for a while the drop it. It's gotten a lot worse over the past month or so. I was lucky enough to have one tech tell me that the towers in my area are running at max but any other time I call in with the issue they keep telling me it's my phone. Funny part is my wife has the same phone and has the same issue. When i go to work I have no issues with it dropping 3G.
I'm getting so agrivated with the poor service I'm getting from these guys. So the tower is maxed out so what am I out of luck and get stuck with a phone I can't fully use for the next year till my contract is out? I hear that AT&T is suppose to be the one with bad customer service but I'm starting to think it Verizon. I will definlitly be going back to Sprint once I can get out of this contract. I had them for many years and have very few problems.
Anyone else out there noticing a higher than normal loose of 3G?

Totally agree, our service is doing the same , My husband and I can not make calls from our home. We live in Hampton and we have to go to the downtown area to make calls? This trouble has started ever since the 4G network was add to Verizon. We only have the simple flip phones, all we want to do is be able to make and receive call in our home like we use to be able to do. Called tech support 6 time as they were talking to me I lost all there calls. I have updated my roaming *228 several times and finally took our phone to Verizon store and the technician updated it for us. Had to back because when we got home the same issues Lost calls. The second time I was told the tower was been serviced in my area. Maybe going to have to change to another network as well. CAN YOU HEAR ME NOW? get with it Verizon!

CUCM 10.5 IPPS Speeddial ip phone services application

After upgrading to CUCM 10.5 my speeddial phone sevice broke. So after fussing with the free phone service in the cisco sdk, and others from Myvoipsource(a good source) I've finally kludged a simple JSP page to do it. It only edits the 1st 6 entries, but that's easy to change. This is a very simple app that uses AXL and soap, so please forgive my poor programming skills.
Installation:
Install Java sdk(jre 7), then apache tomcat(v 7). Make a directory under webapps, like Speedial, than copy over the sd.txt file and rename it to sd.jsp into it. Should work without further imports. If you are using self-signed certs on CUCM you will have to import them into the java default keystore, instuctions here:
http://www.chrissearle.org/2007/10/25/Adding_self-signed_https_certificates_to_java_keystore/
This is based on the kstearns source but modified to be completely self contianed, so you don't need the cisco sdk, or any jar files or classes, etc.
Now just make a phone service with the following url:
http://yourserver:8080/speeddial/sd.jsp?name=#DEVICENAME#
Hope this helps

revised script attached. Program had issues with spaces in the label, and on 8851 phones exiting was a pain. added URLEncoding to label variable in main form url reference, and changed softkey:Exit to Init:Services in the update XML.

Phone Service disconnected over VPN

Hello,
I'm using Version 9.2.1 (147214) of Jabber for OS X and I'm using a VPN to connect to my work network with AnyConnect Secure Mobility Client.
My issue is that Phone Services are disconnected while the Voicemail and Meeting Accounts are functioning as expected.
My server settings are configured automatically, and I'm using the same saved credentials that work when I'm at the office.
Any ideas?
- Ken

This issue is fixed.
Once I changed the automatic configuration of the CCMCIP from an IP address to the hostname that my CUCM uses, my phone service registered across the VPN.

No phone service

I am a customer who receives your internet for 34.99 and lifeline landline service.
I chose lifeline service for the landline rather than my lifeline cell as I was told I can only have 1 according to the Govt.regulations. I was also told I had to have the land line to keep your internet on. So I chose to have the landline than the safe link govt. issued cell phone.
Did you know your competitors do not need a land line to access the internet so I’m wondering if this is true or needed.
Now here is my frustrating issue,for a while I have been having very bad interrupted internet load and speed for the last few months. Been told to just shut off and on and I had someone come to my house on one occasion last month who left for 3 hours and I had to call Verizon to find the worker and dispatch. They located him and her so I got a call back from them and finally was told to just plug my internet back on, and that was it. It worked for a little while. Then off and on again.
But since the 14th of July to my knowledge I have had no PHONE service now. NONE. No One can reach me either. I honestly find this unnaceptable, Verizon. I pay my bills on time and would like to just get answers and some service . I have been patient up to this point . I am also a customer who does not mind to pay more if it mean more better service.
I have made numerous calls ,been disconnected after long wait times, bounced from one person to another ,a number of times people came to my house and my building to fix the problem.
On a number of times I have dealt with inconsistencies like dates made when they actually come a day EARLY when I am not there. I also have made appointments and also been told they don’t need to come to my house anymore so when I am not there they come another day and say an excuse that I wasn’t home when I was told I didn’t need to be since the issue is not in my house and told it is supposedly in 1 of the boxes downstairs.
I have had other situations where someone comes out to the building downstairs a number of times and says they fixed it and I go home to make a call and the phone goes dead and the problem starts all over again.
The last time someone came out Tuesday the 29th of July (and I was sure to be home that Monday also in case they came a day before as they are known to do so) ; they told me that no none is downstairs to open the door to another box my building super seems to be in charge of and needs a key.
Shouldn’t Verizon keep such keys ???
Now I nor anyone can reach the building super so that leaves me still with no service as a women approaching elderly age of 60 years.I have no home phone in case of emergencies and my internet wifi not working properly and overages on my cell phone piling up when I use the internet on my cell and they are restricting data due to over the limit. What am I to do now with you guys??
I WAS told by your company I need this phone line to keep my( slow) internet on. I get only2 mbps in my area and still cant get Fios in my building where there are people in my block who I was told have already .
I have spoken to your competitor Time Warner and they say they don’t even need to get in a box and they do everything through a modem if this is true I might need to go to another company.
I feel like Verizon is like the old ages.Why? Is there not anything your company can do to progress this situation at this point? I thought you guys where the leading company. I will try other means of getting this complaint out if you guys do not handle this or if I am contacting the wrong dept here and or do not get a reply ( not an automated or outourced either please.)
Please direct me to who can as I will keep looking. The better buisness bureau fcc news can be somewhere to go if you guys cant honestly help me in which i really hope you can. I also know that if it was you guys going through all this runaround you would be just as frustrated as i am .
I am a dissapointed customer .

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

Jabber for iPhone & iPad too long to connect to "Phone Services"

Hello,
Has anybody ever experienced delay issues with Jabber for iPhone and/or iPad to connect to "Phone Services"?
In my case, the service does connect but it can take about 1 minute. Some times it can be faster but some others it can take a while to make the service available.
Regards,

You've hit the nail on the head with your last sentence, though to me a month (and then another) to wait for a new line is nothing - I am on my fifth order with BT. They lost the first three, then tried charging me an arm and a leg in excess charges for the fourth. I am trying again, this time with a total package to see if they are a bit more useful when they actually know I'm not going to switch to another provider - fingers crossed.
If they do come back with massive excess charges again though this time I've done my homework. I now know the measurements between my property and the pole as well as the BT price list they use to calculate the charges. I've also worked out a cheaper route than the one they were suggesting - Ofcom say they should offer the cheapest route and the opportunity for the customer to do some of their own work but with me they didn't do either. They also didn't consider that we don't have reliable mobile signal here. They also didn't provide me with any details of how they'd come to that figure and just demanded it. I've had lots of advice from DEFRA, the Department for Business, Innopvation and Skills, Ofcom and ex-Openreach planners and should be able to get a line under the USO. I have a horrible feeling that I've done all this homework now though and they'll just come out and do it without demanding the excess, but if they do I am at least ready this time.

Home Phone Service via Verizon Wireless needs some SERIOUS rethinking!

Has anyone else signed up for home phone service over Verizon Wireless?
Here in LA, they offered a $19.99/month deal using the wireless service - a box provides the service, and you plug your home phone in. The service is adequate, but somebody forgot to think about how home phones work. I tried to get my billing set up through my bank, and after getting no notice for three weeks, I got a message in my email box that my bill was delinquent, and I owed a late fee. I had tried to set up the billing via My Verizon, but could never get a password to work. I finally got a phone number to call, and they sent me a new password via text message - to a home phone with no text capabilities. After hearing and seeing nothing for another two weeks, I called again, and they told me they'd sent the message. I had to remind them that this was a home phone - no texts. So they offered to send me a letter with a new password, within 7-10 ten days. It arrived two weeks later, and didn't work. Each of these phone calls took about an hour, and I still didn't have a connection.
I put the bills (now up to two delinquent cycles) on my credit card, just to bring thins current, and got one more password. This time I called BEFORE trying it, and with the assistance of a more determined tech, got an ID and password combination to work. I can now see my bill. I still don't know if the autopay will work, and I have no idea if there's any way to get a notice that the bill wasn't paid.
I cancelled my AT&T service because of its cost, but at least its billing worked. Verizon has some serious rethinking to do about how it's billing system works for home users. And they didn't lock me into billing hell for two years.
The topper is, today, I got a notice from Verizon that I've been delinquent in returning a refurbished instrument I never received, billed to a phone number I don't have. And of course there's no phone number to call to straighten it out.

Hello KeyGroupGJ!
Wow, Im sorry for all the issues you have had with the Home Phone Connect service! I'd really like to assist you. You mentioned that there is no number to call to get this straightened out. No worries, there is no need to call us, since I can reach out to you. Please send me a direct message with your name, your mobile number, and a good contact number for you. I'll be happy to assist you!
Christina B
VZW Support
Follow us on Twitter @VZWSupport

No phone service, now bogus email from Verizon

We haven't had phone service for over a week and now received a bogus email that would like me to believe it is from Verizon saying there was a problem processing my payment. Does Verizon want to know about this email and how would I contact them regarding it? It is very hard to find information on website other than very general information. Thanks
Solved!
Go to Solution.

Try this link>> https://www22.verizon.com/Content/ContactUs/EmailUs/emailus.htm
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Jabber 9.5 phone service not registering over VPN

TCT devices register fine over Any Connect VPN until I upgraded to 9.5!
After upgrade IM/P and Voice Mail services connect successfully over VPN but phone service indicates it fails to get configuration from server.
Everything works locally. Any ideas what might have changed with 9.5 release that would impact ASA config!

We've come across this issue also except ours is different we can't even login. Just says username or password is invalid.
Works ok on corporate wifi
Does not work on anyconnect over internet wifi.
Does not work on anyconnect over 3G cellular data network.
I can see it connects to the TFTP server pulls the XML files down connects to each CUP server in HA but both return wrong username and password.
-- 2013-11-06 17:33:30.594 ERROR [6dee000] - [JabberWerx][log] [CupSoapCli]: login cup failed, reason: Wrong username/password
-- 2013-11-06 17:33:30.598 ERROR [3c04618c] - [JabberWerx][log] [LoginMgr]: CLoginCup::OnLoginFailed, -1, Wrong username/password
-- 2013-11-06 17:33:30.599 ERROR [3c04618c] - [JabberWerx][log] [assert]: /Users/jingwliu/depot/jwcpp/branches/s201301mobile/jwcpp/LoginMgr/LoginContext.cpp(940): CacheCupServer, ASSERT(!"CacheCupServer() not implemented.") failed!
-- 2013-11-06 17:33:30.600 INFO [3c04618c] - [JabberWerx][log] [LoginMgr]: OnStateChanged CLoginStop::OnStateChanged
-- 2013-11-06 17:33:30.601 INFO [3c04618c] - [JabberWerx][log] [LoginMgr]: conn, canceled due to no needs. supposed:0, signning-on:0, signed-on:0
-- 2013-11-06 17:33:30.601 ERROR [3c04618c] - [JabberWerx][log] [LoginMgr]: login, OnError, 10
-- 2013-11-06 17:33:30.602 ERROR [3c04618c] - [JabberWerx][log] [JabberWerxCPP]: JWLoginSink::OnError, lerr:10
-- 2013-11-06 17:33:30.602 INFO [3c04618c] - [csf-unified.imp.Login][OnLoginError] ****************************************************************
-- 2013-11-06 17:33:30.602 INFO [3c04618c] - [csf-unified.imp.Login][OnLoginError] OnLoginError: LERR_CUP_AUTH: <10>. data: 0
-- 2013-11-06 17:33:30.603 INFO [3c04618c] - [csf-unified.imp.Login][OnLoginError] **************************************************************** -- 2013-11-06 17:33:30.594 ERROR [6dee000] - [JabberWerx][log] [CupSoapCli]: login cup failed, reason: Wrong username/password
-- 2013-11-06 17:33:30.598 ERROR [3c04618c] - [JabberWerx][log] [LoginMgr]: CLoginCup::OnLoginFailed, -1, Wrong username/password
-- 2013-11-06 17:33:30.599 ERROR [3c04618c] - [JabberWerx][log] [assert]: /Users/jingwliu/depot/jwcpp/branches/s201301mobile/jwcpp/LoginMgr/LoginContext.cpp(940): CacheCupServer, ASSERT(!"CacheCupServer() not implemented.") failed!
-- 2013-11-06 17:33:30.600 INFO [3c04618c] - [JabberWerx][log] [LoginMgr]: OnStateChanged CLoginStop::OnStateChanged
-- 2013-11-06 17:33:30.601 INFO [3c04618c] - [JabberWerx][log] [LoginMgr]: conn, canceled due to no needs. supposed:0, signning-on:0, signed-on:0
-- 2013-11-06 17:33:30.601 ERROR [3c04618c] - [JabberWerx][log] [LoginMgr]: login, OnError, 10
-- 2013-11-06 17:33:30.602 ERROR [3c04618c] - [JabberWerx][log] [JabberWerxCPP]: JWLoginSink::OnError, lerr:10
-- 2013-11-06 17:33:30.602 INFO [3c04618c] - [csf-unified.imp.Login][OnLoginError] ****************************************************************
-- 2013-11-06 17:33:30.602 INFO [3c04618c] - [csf-unified.imp.Login][OnLoginError] OnLoginError: LERR_CUP_AUTH: <10>. data: 0
-- 2013-11-06 17:33:30.603 INFO [3c04618c] - [csf-unified.imp.Login][OnLoginError] ****************************************************************
I've opened a support call with our vendor.

Phone service in multiple states

I am setting up 2 branch offices in another state. Each office is relatively small, with about 10 users in each. I would like to know the best way to provide phone service to these users. Each site has a VPN back to us for their data but are on their own phone system. We would like to deploy Cisco phones to these offices that we can manage. We use Cisco Call Manager 8.6 at our HQ. My concerns are how to handle local calls and 911 emergency services. Currently we have several PRIs through AT&T. Can AT&T read the calling party number and route the call to the appropriate PSAP regardless of which state the call originates from or what path it took to get to the PSTN? Same thing with local calls. Will it still be a local call if it has to go through another state before it reaches the PSTN? I've considered setting up Call Manager Express at these sites to get around these issues and I would appreciate any hardware recommendations for these sites.

As far as i know PRIs will not be able to route calls based on ANI and route it to the PSAP but I *think* there is a SIP service that ATT provides that does this. Else you might have to look at putting a small router with 1 or 2 analog lines just for 911 (and SRST if needed). A 2901V/K9 bundle with FXO ports should help you with this.

PHONE SERVICE OUT FOR OVER A MONTH

What is the mne Satter with VERIZON Landline Phone Service. I DOn't have a dial tone for over a Month now. Whatever repair was supposed to be done was supposed to be done for over a week ago. Who do I complain to About this Chicken**bleep** Outfit?

Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal.

Been without any phone service for over 8 hours

There is no way to report the outage online as the diagnostic does not show anything. All of Chihuahua Valley in Warner Springs, California has not had phone service for over 8 hours and Verizon will not admit a problem despite numerous phone calls from friends who are outside the community and have phone service. One of the neighbours was told there are no reports of an outage and was told that she could make an appointment for a tech to come out on the 15th!!!!! Well if anyone at Verizon is reading this then get off your **bleep** and get this fixed. 951 767

Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Support Cases".
There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Phone service disconnected

2/1/2013 After a long battle to get my phone service back after being ported out to Metro PCS. I received a bill from Verizon for $135.11 , I called Verizon to make sure the amount was correct since I did not have phone service from 12/3/2013 to 12/30/2013. Representative stated that I did not have a balance on my account. So I received another bill from Verizon and it stated it was the final notice. I called Verizon again twice checked on the automated line as well as with a representative, checked on line and was told again that I did not have a balance and to disregard the bill. Well on 2/1/2014 my service was disconnected. I contacted Verizon right away and ended up with a Mrs Davis who told me she would look into it, she called me the next day stating that she was still working on it . It has been a week and I have received another bill for services previous balance of $135.11 and new charges for 1/28 to 2/27. I do not have a problem paying the bill, I just want to make sure that I was not charged for the time I did not have services. No one is willing to give me information regarding that balance.

Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board. you will find a link to the private board where you and the agent may exchange information.
To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Simple IP Phone Service Issue

Similar Messages

Maybe you are looking for